Answer:
benefits: can help reduce waste in land fills, and promotes reusability (turned into different products)
drawbacks: can be much more expensive to salvage than to just throw it in a landfill, and most of the time products cannot be recycled effectively due to its material.
5). At what temperature (K) will 0.854 moles of neon gas occupy 12.3 L at 1.95
atmospheres?
Answer:
338.38 K
Explanation:
Applying,
PV = nRT............... Equation 1
Where P = pressure, V = Volume, R = Temperature, n = number of moles, T = temperature.
Make T the subject of the equation,
T = PV/nR............. Equation 2
From the question,
Given: P = 1.95 atm, V = 12.3 L, n = 0.854 moles
Constant: R = 0.083 L.atm/K.mol
Substitute these values into equation 2
T = (1.95×12.3)/(0.854×0.083)
T = 338.38 K
In steps 3 and 4 of the citric acid cycle, successive oxidations produce ________ as a waste product and the four-carbon carrier ________. In steps 3 and 4 of the citric acid cycle, successive oxidations produce ________ as a waste product and the four-carbon carrier ________. CO2; malate CO2; succinyl-SCoA ADP; oxaloacetate ADP; succinyl-SCoA CO2; oxaloacetate
Answer:
CO2; succinyl-SCoA
Explanation:
Citric acid cycle, also called Krebs cycle is the second stage of aerobic cellular respiration, which occurs in the mitochondrion. The kreb's cycle is made up of 7 distinct steps, with each involving series of enzymatic reactions.
According to this question, step 3 and 4 of the citric acid cycle involves an oxidation and decarboxylation reaction to produce 2 molecules of carbon dioxide (CO2) and a 4-carbon compound called succinyl group. A coenzyme A binds to the succinyl group to form succinyl-SCoA.
The total pressure of two unknown gases is 5 kPa. The partial pressure of one of the gases is 2.345 kPa, what is the partial pressure of the other gas?
Answer:
[tex]p_2=2.655kPa[/tex]
Explanation:
Hello there!
In this case, according to the Dalton's law, which states that the total pressure is equal the sum of the pressures of the gases in the mixture, we write the following for this system:
[tex]P_T=p_1+p_2[/tex]
Thus, we solve for the partial pressure of the gas #2 as shown below:
[tex]p_2=P_T-p_1\\\\p_2=5kPa-2.345kPa\\\\p_2=2.655kPa[/tex]
Best regards!
Potassium hydroxide is partially soluble as shown by the
following reaction:
KOH(s) K+ (aq) + OH(aq)
What is the poH of a 3.32 x 10-5 M KOH solution?
pOH =
Your answer should be rounded to three significant figures. Do not Include
units in your answer.
Answer: 4.48 or 4.47
Find the hydroxide concentration of a LiOH soultion that has a pOH of 8.65.
[OH] = _____ (round to 2 decimal places)
Answer: i need help
Explanation:
What will the change in temperature be when 90 J are applied to 15 g of gold. (Cgold = 0.126 J/gºC)
Round your answer to the nearest whole number.
°C
E
3
4
5
Next
O
I 17
Answer:
48 °C
Explanation:
q = 90J
m = 15 g
C = 0.126 J/gºC
q = mct
90 = (15)(0.126)t
t = 47.62 °C = 48 °C
Answer:
Explanation:
Formula
E = m * c * Δt
Δt is what you seek.
Givens
E = 90 joules
m = 15 grams
c = 0.126
Solution
90 = 15 * 0.126 * Δt Divide by 15
90/15 = 15/15 * 0.126 * Δt
6 = 0.126 * Δt Divide by 0.126
6/0.126 = Δt
47.619 = Δt
Δt = 48 oC
Blank O2 + blank Mg arrow blank MgO
Select the coefficients that balance the equation:
MgO *
A) 1,1,1
B) 1,2,2
C) 2,3,4
D) 1,4, 2
Answer:
its a
Explanation:
a
please help! due soon!
Answer:
I think it's
there are the same number of molecules on each side of the equation, then a change of pressure makes no difference to the position of equilibrium
11
Cr2O3 + 2Al → 2Cr + Al2O3
Chromium is produced by reacting its oxide with aluminum. If 76 g of Cr2O, and 27 g of Al completely react to form 51 g of Al2O3. how many grams of Cr are formed?
Answer:
Deci trebuie sa te aplici cu 2 din3 pe suprafata pamanyului chinez
Explanation:
Deci 1287+2086+2762+7:5
Which of the following statements about alkynes is incorrect?
Alkynes are unsaturated hydrocarbons.
Alkynes have triple bonds.
Alkynes are saturated hydrocarbons.
Alkynes have carbon atoms.
Answer:
Alkynes are saturated hydrocarbons
Explanation:
Alkynes are groups of hydrocarbons that have the general formula of {Cn H2n - 2}. They have a triple carbon to carbon bond (C≡C) in their structure. Ethyne (HC≡CH) is the first member of the alkyne series.
Alkynes like alkenes are unsaturated hydrocarbons because of their triple and double carbon bonds respectively. Unsaturated hydrocarbons do not have a complete hydrogen atom in their structural composition. Hence, the statement that "Alkynes are saturated hydrocarbons" is FALSE.
In which type of chemical reaction would two reactants join together and form one product
Answer:
Synthesis Reaction
Explanation:
A synthesis reaction occurs when two or more reactants combine to form a single product. In a decomposition reaction, one reactant breaks down into two or more products. This is the reverse of a synthesis reaction. Replacement reactions occur when elements switch places in compounds.
Hi can someone who know the answers tell me what it is and pls don't send me a link also don't send me the wrong answers if you don't know it's ok :)
Answer:
you diba ikaw ang nagpamalimali diba no
What volume of water is needed to make 5.41 M solution with 47.71 moles of HCL?
Answer:
0.113 liters
Explanation:
5.41 M / 47.71 moles = 0.113 liters
how many atoms are in 4.5 moles of Al?
Explanation:
4.5×6.022×10²³
27.099×10²³
According to Avogadro's number, there are 27.10×10²³ atoms in 4.5 moles of Al.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.
Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number.As 1 mole =6.023×10²³ atoms , thus,4.5 moles =4.5×6.023×10²³ = 27.10×10²³ atoms.
Thus, there are 27.10×10²³ atoms in 4.5 moles of Al.
Learn more about Avogadro's number,here:
https://brainly.com/question/11907018
#SPJ2
What is a state function?
What is the mass of disulfur pentoxide (S2O5)?
Answer: What is the mass of disulfur pentoxide (S2O5)?
Explanation:144.14g/mol
Using the example of an ambulance, explain the Doppler Effect. Infer why the doppler effect can or cannot occur in all waves. PLEASE ANSWER ILL PICK BRAINLEIST TO THE FIRST ACTUAL ANSWER
Answer:
When the ambulance is coming towardss you the waves are smushed together and sound higher pitched but then it passes you and when tracveling away the waves are scretched out so the whee whoo sounds lower and that is because of the doppler effect
What is the pressure of a car tire that had an initial pressure of 33.7 kPa but was
heated from 98.4°C to 110.°C?
Answer:
34752.6 Pa.
Explanation:
Applying,
P/T = P'/T'............... Equation 1
Where P = Initial Pressure, T = Initial Temperature, P' = Final pressure, T' = Final temperature.
make P' the subject of the equation
P' = (PT'/T).............. Equation 2
From the question,
Given: P = 33.7 kPa = 33700 Pa, T = 98.4°C = (273+98.4) = 371.4 K, T' = (110+273) = 383 K
Substitute these values into equation 2
P' = (33700×383)/371.4
P' = 34752.6 Pa.
If 13 grams of copper sulfate is reacted with zinc how much of each product is produced?
Answer:
No. Of Moles of zinc = m/Ar
= 13/ 65.38 = 0.198 moles
From balanced equation, Mole ration between CuSO4 and Zn is 1 : 1
So only 0.198 moles of CuSO4 reacts, it is in excess
Mass = no of Moles X Mr
Mass = 0.198 X 159.5 = 31.59 grams
Volume = mass m denisty
Volume j 31.59 / 3.6 = 8.78 ml
Explanation:
i think this wrong
Which of the following elements has the ability to undergo sublimation
iodine
oxygen
carbon sodium
Answer:
iodine
Explanation:
4. A blue light is shined on objects X and Y. Object X appears to be blue, and object Y appears to
be black. Which of the following is correct?
A. Object X absorbs blue light, and object Y reflects blue light.
B. Object X reflects blue light, and object Y absorbs blue light.
C. Object X must be black, and object Y must be blue.
D. Object X must be blue, and object Y must be black.
A blue light is shined on objects X and Y. Object X appears to be blue, and object Y appears to be black when Object X reflects blue light, and object Y absorbs blue light. Hence option B is correct.
What is light ?Visible light spectrum is nothing but the range of wavelength of radiation from 4000 angstrom to 7000 angstrom(Violet to Red). light is a energy packet. Every Photon having different wavelength travels with same velocity c (velocity of light). When we focus numbers of colors from visible spectrum to a point, that point appears as a white light. hence white light is composed of numbers of Colors in it.
When we pass white light through a prism, as white light enters in the prism all the colors having different wavelength travels with different velocity in the prism due to that there is separation of colors from the white light. Therefore we get different colors of white light in the prism this phenomenon is know as dispersion of light.
Light can be reflected, absorbed, transmitted diffracted and scattered etc.
α + β + ν = 1 where α, β, ν are coefficient of absorption, reflection and transmission.
When any object appears to be black it means that radiation has been absorbed by that body, it has high absorption coefficient. and when a body appears to be colored, it means that object has reflected the particular color, it having high reflection coefficient.
Hence option B is correct.
To know more about light :
https://brainly.com/question/15200315
#SPJ2.
You are given 250 mL of a 12.0 M solution of KNO3. To obtain a 5.0 M, to what volume does the solution need to be diluted to?
600 ml
104.17 mL
0.24 mL
60 mL
Answer:
600 mL
Explanation:
molarity 1 * volume 1 = molarity 2 * volume 2. So this means 12 * 250 = 3000 and divide that by 5 to get 600 mL.
¿Cómo se llama el grupo IIA de la tabla periódica?
Answer:
los metales alcalinotérreos: berilio (Be), magnesio (Mg), calcio (Ca), estroncio (Sr), bario (Ba) y radio (Ra).
o simplemente llamado grupo 2A
Explanation:
what does the period number on the periodic table tell us?
Answer:
The period number on the Periodic table tells you the total number of orbits that the atom will have. In other words, the period number indicates the number of energy levels (or energy orbit) of an atom. For example, 1st period indicates that these elements possess 1 energy shell (or energy orbit).
Explanation:
Balance the equation ___C+___Fe203—-____CO2+___Fe
Answer:
3,2,3,4
Explanation:
try this answer, it's syits best to the question
How would you find the density of a can of soda pop?
A. Find the mass of the can of soda pop and then multiply by the number of cubic centimeters in the can
B. Find the mass of the can of soda pop and then divide by the number of cubic centimeters in the can
C. Convert a gallon into cubic centimeters and then divide by the mass of the can of soda pop
D. Convert a gallon into cubic centimeters and then subtract the mass of the can of soda pop
Answer:
it's A.
Explanation:
have uh good day ma :)))))))
In the Caribbean countries, general election is usually held every _ years
it is held every 4-5 years
what is:
Na2O+SO2 =
for chemistry
Na2SO3 – Sodium sulfite
why dil. sulphuric acid cannot be used instead of dil.hcl in lab preparation of carbon dioxide gas?
Answer:
Because Sulphuric acid(H2SO4) is one of the substance which have a very high vigourous reaction if mix with chemicals thats why we take the same sulphuric acid but having lighter effects known to be as Dil.Sulphuric And so it is generally use for precaution while during experimentations Thats why we use it.
Hope it helps
- How much power does it take to lift a
1,000 N load 10 m in 20 s?
Answer:
"500 Joule/sec" is the right answer.
Explanation:
The given values are:
Force,
F = 1000 N
Velocity,
s = 10 m
Time,
t = 20 s
Now,
The power will be:
= [tex]\frac{Force\times Velocity}{Time}[/tex]
On putting the values, we get
= [tex]\frac{1000\times 10}{20}[/tex]
= [tex]\frac{10000}{20}[/tex]
= [tex]500 \ Joule/sec[/tex]