"" ANSWER""
Protons are values of atomic numbers that do NOT change, that is, they are located inside the nucleus of the atom, whereas electrons are located in the electrosphere that can gain or lose electrons, the electron has a negative charge and the Proton positive, that is, if in any atom it wins an electron the atom will be negative and if the atom loses it will be positive because we already know that the number of protons does not change. To calculate the number of neutron we have to make the number of rounded atomic mass which becomes mass less the number of protons for example oxygen gas has 8 protons which is the atomic number and has atomic mass 15,999 which rounding up to 16 to find the number of neutrals we do 16-8 = 8 so now we know that oxygen has: 8 protons, 8 electrons and 8 neutrons but the values will not always be the same but the possibility of protons and neutrals having the same value is 75% by my count .
● ○ ● RULES ○ ● ○ ●
Atomic number = number of protons
Atomic mass ROUNDNESS = mass
Number of neutrons = number of protons - mass number
OBSERVATION- EXPLANATION FOR STUDENTS OF 9 YEARS BECAUSE IN THE HIGH SCHOOL UP SOME CHANGES CHANGE.
■■ GOOD STUDIES ■■
18.
react to cause chemical reactions
Protons
Neutrons
Electrons
Identifying Cell Structures
Which structures are found in plant colls, but not in animal cells? Check all that apply
)
coll wall
coll membrane
chloroplasts
O lysosomes
ribosomes
vacuoles
Answer:
cell wall and chloroplasts
Explanation:
how many grams of sulphur contain 3.0×1021 atoms
Answer:
There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
Explanation:
One mole of a substance contains 6.02 × 10²³ particles
One mole of sulphur atom contains 6.02 × 10²³ atoms
Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³
Number of moles of sulphur atom = 0.00498 moles of sulphur atom
The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.
Molar mass of sulphur atom = 32 grams per mole (g/mol)
Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol
Mass of sulphur = 0.16 g
Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
PLEASE HELP ASAP!!!!!!????
Answer:
The third one!
Excessive use of chemical fertilizer cause chemical pollution.How?
Explanation:
Chemical fertilizers raise crop yields, but their heavy usage has hardened the soil, diminished fertility, reinforced pesticides, contaminated air and water, and emitted greenhouse gases, posing health and environmental risks.
which part of a food chain absorbs the Sun's light and heat
The plants are the part that absorb the Sun's light and heat.
The part of a food chain that absorbs the sun's light and heat is producers that are plants.
What is a food chain?A food chain is the chain that shows the transfer of energy from one part to another.
The bottom of the food chain is the producers that make their own food, then the consumers and the decomposers.
Thus, the part of a food chain that absorbs the sun's light and heat is producers that are plants.
Learn more about food chain
https://brainly.com/question/16065961
#SPJ2
Which of these statements describes a physical property of hydrogen? Group of answer choices it is found in acids. it is less dense than oxygen gas. it reacts with oxygen to form water. it is highly flammable.
Answer:
it is less dense than oxygen gas.
Explanation:
Hydrogen is the simplest chemical element that exists. The symbol for the chemical element Hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.
Hydrogen is a chemical element found in group (1) of the periodic table and as such it has one (1) electrons in its outermost shell. Therefore, Hydrogen has an atomic number of one (1) and a single valence electrons because it has only one proton and one electron in its nucleus.
In Chemistry, the properties of a chemical element that can be observed and measured without changing its chemical nature is known as a physical property. It includes density, color, freezing point, opacity, smell, melting point, viscosity, etc.
Hence, the statement which describes a physical property of hydrogen is that it is less dense (density) than oxygen gas.
1. How many liters of a 0.50 M solution are needed to give 3.5 moles of solute?
Answer:
The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution
Explanation:
The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution
Therefore we have;
The concentration of the intended solution = 0.250 M
Therefore, the number of moles per liter of the required resolution = 0.250 moles
Therefore, the concentration of the required solution = 0.250 moles/liter
The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;
The required volume of solution = The number of moles of the solute/(The concentration of the solution)
∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters
The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
Pleseee help me pretty please ✨
Answer:
6 N.
Every thing has equal and opposite reaction.
Answer:
The answer is C I believe, I do not know for sure but I think that is the answer..
I'm sorry if I'm wrong.
Explanation:
do i have to know the chemical and physical properties of alloys? only chemistry students answer this.
Answer:
yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use
Answer:
alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.
physical properties of alloys:-Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.
chemical properties of alloys:-Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.
dnt learn all thr properties.
these are the main properties..u can learn thse only. hope it will help u
most of the earth's landmasses is covered by a mixture of bits of rock and bit of once~living part of plants or animal. this material is called
and its not fossil
Help me please I’ll give brainliest answer
Answer:
the answer is c I believe
There are 5 moles of N20 at STP. What is the density?
Answer:
5 mole of N2O : 112 litre of N2O
5 mole of N2O : 220 g of N2O
Then,
Density = mass/ volume
= 220/112
= 1.96 g per litre
How are cations formed? A. when one or more electrons of an atom disintegrate B. when an atom gains one or more electrons from other atoms C. when an atom shares one or more electrons with another atom D. when an atom loses one or more electrons
Answer:
D
Explanation:
When an atom loses an electron the number of electrons exceeds the number of protons. This means that the negative charge induced by the electrons exceeds the positive charge induced by the protons.
In a reaction 25.00mL of nitric acid required 51.4mL of 0.73M calcium hydroxide. Calculate the grams of nitric acid per liter of solution
Answer:
47.27 g HNO₃
Explanation:
The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:
2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)
According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of HNO₃ reacts with the total number of moles of Ca(OH)₂:
2 x moles HNO₃ = moles Ca(OH)₂
The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):
M(HNO₃) = ?
M(Ca(OH)₂) = 0.73 M
V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L
V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L
So, we can write the equation at neutralization point as:
2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)
From this, we can calculate the molarity of HNO₃:
M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)
= (0.73 M x 0.0514 L)/(2 x 0.025 L)
= 0.75 M HNO₃
We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:
Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol
Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:
0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃
During photosynthesis, plants change light energy into:
chemical energy
solar energy
mechanical energy
electrical energy
i will mark brainlest
Answer:
chemical energy
Explanation:
just put that
Answer:
chemical energy
Explanation:
it is the light dependent reaction
help help help help help
Answer:
Temporary hardness is a type of water hardness caused by the presence of dissolved bicarbonate minerals (calcium bicarbonate and magnesium bicarbonate). ... However, unlike the permanent hardness caused by sulfate and chloride compounds, this "temporary" hardness can be reduced by boiling the water.
This unit discusses in detail the role of catalysts to lower the activation energy of reactions. The term catalyst appears in nonscientific discussions to refer to something that provokes or speeds significant change or action. Consider this example from the 2006 Associated Press article "Chernobyl cover-up a catalyst for glasnost":
"For the Soviet Union, Chernobyl was a catalyst that forced the government into an unprecedented show of openness that paved the way for reforms leading to the Soviet collapse"
Discuss how this scientific term has made its way into common usage. Does the term catalyst carry the same meaning in regular usage? How is it used differently in a scientific context compared to a nonscientific contexte
Answer:
It can be brought into regular conversation easily I feel it means to "provoke" or "speeds significant change or action" I can see someone saying that in a conversation, "chlorine acts as a catalyst promoting the breakdown of ozone".
I would say it would take the same meaning depending on how you say it and when and what the context of what you're saying it in.
For scientists, it means to change quickly. For someone who says it in a conversation may be saying to stop provoking someone.
Explanation:
Convert 75k to oC
(I’ll mark you as brainlister)
Answer:
-198.15
Explanation:
sorry if wrong form
Classify the following as a chemical or physical property: Iron melts at 1535 degrees C. chemical or psychical?
Answer:
Physical property
Explanation:
Change in state is a physical property of matter.
5. Para la siguiente reacción: KClO3 (s) KCl(s) + O2
Si se descomponen 500 gramos de una muestra impura de clorato de potasio y se recogen 100 litros de O2 medidos bajo condiciones normales de presión y temperatura. Determine la pureza de la muestra.
Answer:
72.95%
Explanation:
Para resolver esta pregunta, debemos hallar las moles tóricas que se producirían en la reacción asumiendo que los 500g son únicamente de clorato de potasio haciendo uso de la reacción balanceada:
2KClO₃(s) → 2KCl(s) + 3O₂(g)
Donde dos moles de clorato de potasio producen tres moles de oxígeno.
Después de hallar las moles teóricas de oxígeno debemos hallar las moles producidas usando PV = nRT. La pureza SERÁ:
Moles producidas / moles Teóricas * 100
Moles clorato -Masa molar: 122.55g/mol-:
500g KClO₃ * (1mol / 122.55g) = 4.08 moles KClO₃
Moles O₂ teóricas:
4.08 moles KClO₃ * (3 moles O₂ / 2 moles KClO₃) = 6.12 moles
Moles producidas:
PV / RT = n
Donde P = 1atm a STP
V es volumen = 100L
R es constante de los gases = 0.082atmL/molK
T =273.15K a STP
Reemplazando:
1atm*100L / 0.082atmL/molK*273.15K = 4.46 moles
La pureza de la muestra es:
4.46 moles / 6.12 moles * 100 = 72.95%
Alia needs to order the following isotopes by atomic number. Use what you know about atomic number and
isotopes to drag and drop the tiles in order of increasing atomic number from lowest to highest.
Silver-109
Cadmium-106
Rhodium-122
Indium-110
Palladium-109
Answer:
Rhodium-122 < Palladium-109 < Silver-109 < Cadmium-106 < Indium-110
Explanation:
Atomic number - Number of protons.
The number displayed at the end of the element in this question represents the mass number (Number of protons + Number of neutrons).
The atomic number of the isotopes are given below;
Silver-109 --> 47
Cadmium-106 --> 48
Rhodium-122 --> 45
Indium-110 --> 49
Palladium-109 --> 46
Arranging in order of increasing atomic number from lowest to highest;
Rhodium-122 < Palladium-109 < Silver-109 < Cadmium-106 < Indium-110
The different between molecules in a liquid and molecules in a gas
Answer:
Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
HELP DUE IN 7 minutes TwT
Which product forms from the synthesis reaction between sodium (Na) and
sulfur (S)?
O A. Nasz
B. Nas
C. Na2S
O D. Na2S2
Answer:
Answer is C
Explanation:
the valency of sulphur is 2 ans sodium is 1
by crossing it forms NA2S
What would happen to Earth's temperature if the energy absorbed from the sun (solar radiation) was less than the emitted (thermal) energy leaving the Earth?
Answer:
The Earth would become cooler until it probably attains a new equilibrium between absorbed solar energy and emitted solar energy.
Explanation:
The earth's energy balance refers to the balance between the energy absorbed from the sun (solar radiation) and the emitted (thermal) energy leaving the Earth. This balance ensures that the earth's surface temperature remains fairly constant.
When energy from the sun reaches the earth, it is absorbed and used by various features of the earth which uses it for their energy needs. Eventually, any excess radiant energy is sent back or emitted from the earth back into space such that the balance between absorbed and emitted energy is maintained.
However, if there is an imbalance whereby more energy is emitted than is absorbed, this would result in the earth losing more heat than it receives. This would result in the earth becoming more significantly colder until it probably attains a new equilibrium between absorbed solar energy and emitted solar energy.
Dipole-dipole interactions are (weaker than, stronger than, equal to) hydrogen bonds.
Answer and Explanation:
Dipole-Dipole interactions are weaker than hydrogen bonds.
Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.
#teamtrees #PAW (Plant And Water)
Please help will mark Brainliest!!!
How many grams of HCL (hydrochloric acid) can you make with 50 grams of Cl.
H + Cl -> HCL is the balanced equation
Answer:
Explanation:
It's 21 /
in what two ways do minerals form
Answer:
Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.
Answer:
When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.
If an electron has an acceleration of 2.33 × 102 m/sec2, what is this value in units of m/min2?
Answer:
The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]
Explanation:
An electron has an acceleration of 2.33*10² [tex]\frac{m}{sec^{2} }[/tex]
To be able to express in units [tex]\frac{m}{min^{2} }[/tex], you must carry out the conversion taking into account that 1 [tex]\frac{m}{sec^{2} }[/tex]= 3600 [tex]\frac{m}{min^{2} }[/tex]. Then you can apply the following rule of three: if 1 [tex]\frac{m}{sec^{2} }[/tex] equals 3600 [tex]\frac{m}{min^{2} }[/tex], 2.33 * 10² [tex]\frac{m}{sec^{2} }[/tex] equals how much [tex]\frac{m}{min^{2} }[/tex]?
[tex]\frac{m}{min^{2} }=\frac{2.33*10^{2} \frac{m}{sec^{2} }*3600\frac{m}{min^{2} }}{1\frac{m}{sec^{2} }}[/tex]
[tex]\frac{m}{min^{2} }=838800[/tex]
The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]
Present in a state where it molecules are far apart during a change of state it's molecules slow down which change of state has most likely taken place from a gas to a liquid from a liquid to a gas from a solid to a liquid from a gas to a plasma
Answer:
The change of state that has occurred is from a gas to a liquid
Note: The question is incomplete. The complete question is given blow.
H₂O is initially present in a state where its molecules are far apart. During a change of state, its molecules slow down. Which change of state has most likely taken place?
from a gas to a liquid
from a liquid to a gas
from a solid to a liquid
from a gas to a plasma
Explanation:
Water can exists in three states: as gaseous water vapor, as liquid water, and as solid ice. Each of these states of water can be interconverted from one to another by the addition or removal of heat in a process known as change of state.
Liquid water can be converted to solid ice by the removal of heat, while solid ice ice can be converted to liquid water by the addition of heat. Also, liquid water can be converted to water vapor by the addition of heat, while water vapor can be converted to liquid water by the removal of heat.
Of the three states of water, the one in which the molecules are farthest apart is in the gaseous state. The molecules have high kinetic energy and move randomly while colliding with one another. When a heat is removed from these highly energetic molecules, the molecules slow down and lose some of their kinetic energy and a change of occurs from gaseous to liquid state.
Therefore, the change of state that occurred as described, is from gas to liquid.