True or False. A compound is formed when two or more elements are combined to make a new substance with its own properties.

Answer:

The quadriceps consists of four muscles: the skinny rectus femoris and the three huge “vasti” — vastus lateralis/intermedius/medialis. The vasti are only elongated by knee flexion, which is limited to about 120˚ when the calf hits the hamstrings. The vasti cannot be stretched strongly.

Answer:Masseter and temporalis

Why it’s unstretchable: The jaw can only open so far.

Why it’s a dang shame: Jaw tension is epidemic, and trigger points in these muscles cause a wide array of strange face and head pains, including toothaches, headaches, and earaches.

Answer:

answer is d from my guess

Answer:

[tex]A_{1}[/tex] = 0.2 [tex]m^{2}[/tex]

Explanation:

The pressure on the pistons is given as;

Pressure = [tex]\frac{Force}{Area}[/tex]

So that,

Pressure on the small piston = [tex]\frac{F_{1} }{A_{1} }[/tex] and Pressure on the large piston = [tex]\frac{F_{2} }{A_{2} }[/tex]

Thus,

[tex]\frac{F_{1} }{A_{1} }[/tex] = [tex]\frac{F_{2} }{A_{2} }[/tex]

Given that: [tex]F_{1}[/tex] = 100 N, [tex]F_{2}[/tex] = 2000 N, [tex]A_{2}[/tex] = 4 [tex]m^{2}[/tex].

[tex]\frac{100}{A_{1} }[/tex] = [tex]\frac{2000}{4}[/tex]

[tex]A_{1}[/tex] = [tex]\frac{100*4}{2000}[/tex]

    = [tex]\frac{400}{2000}[/tex]

    = 0.2

[tex]A_{1}[/tex] = 0.2 [tex]m^{2}[/tex]

The area of the small piston is 0.2 [tex]m^{2}[/tex].

Answer:

I don't know what you're asking, but I will try my best.

If Susan fertilizes her geranium plants, it will help them blossom. If she over-fertilizes them though, they will die. But yes, in general, they will blossom if Susan fertilizes her geranium plants.

Answer:

- 42

Explanation:

m = 6kg

vi = 17 m/s

vf = 10 m/s

delta mv = ?

Formula

delta mv = m*(vf) - m(vi)

delta mv = 6(10 - 17)

delta mv = 6(-7)

delta mv = - 42 kg m/s

Weathering is words applies to all types of sedimentary rock.

The breakdown or dissolution of rocks and minerals on the Earth's surface is referred to as weathering. Agents of weathering include water, ice, acids, salts, plants, animals, and variations in temperature.

The breakdown or dissolution of rocks and minerals on the Earth's surface is referred to as weathering. Agents of weathering include water, ice, acids, salts, plants, animals, and variations in temperature.

The effects of weathering and erosion cannot be resisted by any rock on Earth due to its softness. These processes combined to carve famous sites like Arizona's Grand Canyon.

Therefore, Weathering is words applies to all types of sedimentary rock.

To learn more about weathering, refer to the link:

https://brainly.com/question/12963930

#SPJ2

Answer:

Acceleration of one cyclist=[tex]2.67m/s^2[/tex]

Yes, the acceleration is higher of another cyclist who accelerates from 0 to 30 m/s in 8 seconds.

Explanation:

We are given that

Initial velocity of one cyclist, u=0 m/s

Final velocity of one cyclist, v=8m/s

Time, t=3 s

Initial velocity of another cyclist, u'=0

Final velocity of another cyclist, v'=30m/s

Time, t'=8 s

We know that

Acceleration, [tex]a=\frac{v-u}{t}[/tex]

Using the formula

[tex]a=\frac{8-0}{3}=\frac{8}{3}=2.67m/s^2[/tex]

Acceleration of one cyclist=[tex]2.67m/s^2[/tex]

Acceleration of another cyclist, a'=[tex]\frac{30-0}{8}m/s^2[/tex]

Acceleration of another cyclist, a'=[tex]3.75m/s^2[/tex]

Yes, the acceleration of another cyclist is higher than the cyclist which accelerates from 0m/s to 8m/s.

Answer:

because he give heat and energy

Lithium fluoride will be most soluble in water because it is most strongly ionic.

Solubility is the amount of a substance that dissolves in a given volume of solvent at a particular temperature.

Solubility is affected by:

Water is a polar molecule.

Lithium fluoride will be most soluble in water because it is most strongly ionic.

Learn more about solubility at: https://brainly.com/question/23946616

Coulomb's Law says that the forces between any two charges depends directly on the size of the charges and inversely on the square of the distance between the charges. The correct option is D. A & B

From the question, we are to determine the correct option.

First, we will state Coulomb's law.

Coulomb's law states that the electrical force between two charged objects is directly proportional to the product of the quantity of charge on the objects and inversely proportional to the square of the separation distance between the two objects

That is,

[tex]F \propto \frac{Q_{1} Q_{2} }{r^{2} } [/tex]

Where F is the electrical force

[tex]Q_{1} \ and \ Q_{2}[/tex] are the charges

r is the distance between the objects

From the law, we can observe that the forces depends directly on the size of the charges - Option A

and the forces also depends inversely on the square of the distance between the charges - Option B

Hence, the correct option is D. A & B

Learn more on Coulomb's law here: https://brainly.com/question/16033085

Answer:

m = 96.53 grams

Explanation:

Given that,

The density of metallic platinum, d = 21.5 g/cm³

Volume, V = 4.49 cm³

We need to find the mass. Let it is m. We know that the density is equal to the mass per unit volume. So,

[tex]d=\dfrac{m}{V}\\\\m=d\times V\\\\m=21.5\times 4.49\\\\m=96.53\ g[/tex]

So, the required mass is 96.53 grams.

Answer:

Increase, same, same

Explanation:

I think that you need the gravitational acceleration of mercury

so we will use Newton's gravitational law :

gravitational acceleration = [tex]\frac{G * m}{r^{2} }[/tex]

G is the gravitational constant = G = 6.673×10^-11 N m^2 kg^-2

after substitution :

6.673×10^-11 * 3.2x10^23 / (2.43x10^6)^2

using calculator :

gravitational acceleration of mercury = 3.61625 m/s^2

pls give me brainliest

Semi-conductors are materials that have conductivity between that of a conductor and a non-conductor (insulator).

Example: Silicon

Answer: If all the electrons of an atom are removed, it will change to become a positively charged ion called a cation.

Explanation:

Answer:

The atom becomes positively charged.

Explanation:

There is no right or wrong answer, your teacher wants you to support your own answer with points. As long as the reasons make logical sense you are fine.

I think they both have valid points. Their replies are both true, but from a buyer's perspective who would you purchase services from? You would get different answers depending on who you ask.

If you choose to go old school, obviously you get an actual photo that can be stored physically. This means it is a memory that can be preserved, and it might feel more nostalgic being able to touch the photo.

On the other hand, a digitally stored photo can be altered (photoshop), but it is forever as long as the internet still exists. A physical photo would fade with time, which doesn't happen with a digital photo.

It is definitely easier to argue that digital photography has more advantages (they do, it is why nobody uses film anymore)

Points you can consider:

Can be transferred to the other side of the world instantly

Ability to make copies and print as many photos as you want

Can be stored on cloud/devices and be like that forever

Compare them with film photography to give a more solid response.

Answer:

Both ice and snow have a lower coefficient of friction in comparison with grass, wood or pavement.

Explanation:

The main reason why people and bears, slip and fall on ice/snow is that both ice and snow have a lower coefficient of friction in comparison with grass, wood or pavement. We present below a comparative chart of coefficients of friction associated with different materials:

Material       Coefficient of Friction - Static                  

Ice/Snow                   0.05 - 0.3

Wood                          0.2 - 0.6

Asphalt                        0.5 - 0.7

Grass                            0.3 - 0.5

Answer:

JUST A MINUTE KAPENG MAINIT

==================================================

Work Shown:

We have these variables

Solving for the mass gets us...

p = m*v

25 = m*2.5

25/2.5 = m

10 = m

m = 10

The mass of the horse is 10 kg.

Answer:

hhh

Explanation:

Answer:

La persona está nadando en la alberca a una profundida de 5.575 metros.

Explanation:

La presión absoluta ([tex]P_{tot}[/tex]) experimentada por la persona es la suma de la presión atmosférica ([tex]P_{atm}[/tex]) y la presión hidrostática de la columna de agua de la alberca ([tex]P_{h}[/tex]), medidas en kilopascales. Es decir,

[tex]P_{tot} = P_{atm}+P_{h}[/tex] (1)

[tex]P_{tot} = P_{atm} + \frac{\rho\cdot g \cdot z}{1000}[/tex] (2)

Donde:

[tex]\rho[/tex] - Densidad del fluido de la alberca, medida en kilogramos por metro cúbico.

[tex]g[/tex] - Aceleración gravitacional, medida en metros por segundo al cuadrado.

[tex]z[/tex] - Profundidad de la persona en la alberca, medida en metros.

Si sabemos que [tex]P_{atm} = 101.325\,kPa[/tex], [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] y [tex]P_{tot} = 156\,kPa[/tex], entonces la profundidad de la persona en la alberca es:

[tex]156 = 101.325 +\frac{(1000)\cdot (9.807)\cdot z}{1000}[/tex]

[tex]54.675 = 9.807\cdot z[/tex]

[tex]z = 5.575\,m[/tex]

La persona está nadando en la alberca a una profundida de 5.575 metros.

Answer:

Average speed=1.5 m/s

Frequency of pendulum=93.75Hz

Explanation:

We are given

Frequency, [tex]f=0.100Hz[/tex]

Average wavelength =[tex]\lambda=15m[/tex]

Speed of pendulum, [tex]v=30m/s[/tex]

Wavelength, [tex]\lambda'=0.32m[/tex]

We have to find the average speed and frequency of pendulum.

We know that

Speed,[tex]v=\lambda f[/tex]

Using the formula

Average speed,[tex]v=15\times 0.1=1.5m/s[/tex]

Hence, the average speed =1.5m/s

Frequency, [tex]f=\frac{v}{\lambda'}[/tex]

Using the formula

[tex]f=\frac{30}{0.32}[/tex]

[tex]f=93.75Hz[/tex]

Hence, the frequency of a pendulum=93.75Hz

Answer:

The electrostatic force that will result if both charges are doubled and the distance remains the same is 6.0 * 10⁻⁶ N

Explanation:

Coulomb's law of  electricity states that the magnitude of the force of attraction or repulsion between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance of of separation between them.

In formula; F = KQ₁Q₂/d²

Using the formula for electrostatic force of attraction above to determine the force of between the two charged spheres

Let the charges be Q₁ and Q₂; distance of separation be d, K is a constant

Initially, F₁ = KQ₁Q₂/d² ---- (1)

F₁ = 3.0 * 10⁻⁶ N

when the charges are doubled, Q₁ = 2Q₁; Q₂ = 2Q₂; K and d remains constant

F₂ = 2KQ₁Q₂/d² ----(2)

Dividing equation (2) by (1) to find the ratio of their forces

F₂/F₁ = (2KQ₁Q₂/d²) / KQ₁Q₂/d²

F₂/F₁ = 2

Thus, F₂ is twice F₁.

Since F₁ = 3.0 * 10⁻⁶ N; F₂ = 2 * 3.0 * 10⁻⁶ N

F₂ = 6.0 * 10⁻⁶ N

Therefore, the electrostatic force that will result if both charges are doubled and the distance remains the same is 6.0 * 10⁻⁶ N

Electrostatic force is a force imposed by one charge on another as a result of the field.Electrostatic force will  be 12.0 x 10⁻⁶ N if both charges are doubled and the distance remains the same.

It is a force imposed by one charge on another as a result of the field.

The electrostatic force produced by one line charge on another line charge separated by distance d is determined by the charge potency of each charge as well as the separation distance between them.

Hence the electrostatic force is given by  

[tex]\rm F=\frac{Kq_1q_2}{d^2}[/tex]

The given data in the question ,

d is the distance between the charge

F₁ is the electric force for case 1= 3.0 x 10⁻⁶ N

F₂ is the  electric force for case 2= ?

Conditions for case 2;

(q₁=2q₁),(q₂=2q₂),d₂=d₁

For case 1,

[tex]\rm F_1=\frac{Kq_1q_2}{d_1^2}[/tex]

For case 2,

[tex]\rm F_2=\frac{K(2q_1)(2q_2)}{d_1^2}[/tex]

[tex]\rm F_2=4\times\frac{Kq_1q_2}{d_1^2}\\\\\rm F_2=4F_1[/tex]

[tex]\rm F_2=4\times\frac{Kq_1q_2}{d_1^2}\\\\\rm F_2=4\times3.0\times 10^{-6}\\\\\rm F_2=12.0\times10^{-6}[/tex]

Hence electrostatic force will be 12.0 x 10⁻⁶ N.  if both charges are doubled and the distance remains the same.

To learn more about the electrostatic force refer to the link;

https://brainly.com/question/9774180

Explanation:

A circuit breaker is an automatic switch that cut off current in a circuit when the current become too large. When the current in a circuit increases, the strength of the electromagnet will increase in accordance; this will pull the soft iron armature towards the electromagnet.

Answer:

A.add the forces

Explanation:

since they're both going in the same direction then they should be added to get the total net force.

pls mark me brainliest

The net force acting on the airplane if, An airplane is flying at 80 kilometers per hour when a strong tailwind, traveling in the same direction at 5 kilometers per hour is 85 km/hr so, option A is correct.

Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces.

For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.

Given:

An airplane is flying at 80 kilometers per hour when a strong tailwind, traveling in the same direction at 5 kilometers per hour,

Calculate the net force acting on the airplane as shown below,

The net force acting on the airplane = The velocity of the airplane + velocity of the wind  (As they both are in the same direction)

The net force acting on the airplane = 80 km / hr + 5 km / hr

The net force acting on the airplane = 85 km / hr

Thus, the net force acting on the airplane is added.

To know more about Force:

https://brainly.com/question/13191643

#SPJ2

Answer:

I want to help you but i cant.

Explanation:

please provide a screenshot or photos of moons 1-4

Answer:

t = 2 hours

Explanation:

Given that,

Distance of the town, d = 90 miles

Speed, v = 45 mph

We need to find the time to get there. The speed of an object is given by :

[tex]v=\dfrac{d}{t}[/tex]

Where

t is time

[tex]t=\dfrac{d}{v}\\\\t=\dfrac{90}{45}\\\\t=2\ h[/tex]

So, the required time is 2 hours.