To investigate the reactivity of metals a student uses four metals. Each time they added 1 g of the metal to 25 cm³ of sulfuric acid and record the temperature change. Identify the control variables in this example

Answers

Answer 1

Answer:

Volume of the sulfuric acid (25cm³), same mass of each metal (1g)

Explanation:

In an experiment, the CONTROL VARIABLE also known as constant is the variable that is kept unchanged for all groups in an experiment. This is done in order not to influence the outcome of the experiment.

In this case, students are trying to investigate the reactivity of four different metals. They added 1 g of each metal to 25cm³ of sulfuric acid and recorded the temperature change. Based on the explanation of control variable above, the VOLUME OF SULFURIC ACID (25cm³) and the MASS OF EACH METAL (1g) are the CONTROL VARIABLES because they are the same or unchanged in this experiment.


Related Questions

Which statement describes a digital signal used to store information

Answers

Answer:

it is 1,4

Explanation:

Just took the test hope you get it right. c:

Answer:

It is made of numbers

Explanation:

Found the hard way.

Large amounts of an unknown compound were isolated from seawater. The compound contained 32.0 grams ofbromine and 4.9 grams of magnesium. What is its percent composition?

Answers

Answer:

87% bromine and 13% magnesium

Explanation:

The compound contained 32.0 grams of bromine and 4.9 grams of magnesium.

We need to find its percent composition.

Mass of the sample = mass of bromine + mass of magnesium

= 32 g + 4.9 g

= 36.9  g

Percentage composition of bromine,

[tex]\%=\dfrac{32}{36.9}\times 100\\\\=86.7\\\\=87\%[/tex]

The percentage composition of magnesium,

[tex]\%=\dfrac{4.9}{36.9}\times 100\\\\=13.27\\\\=13\%[/tex]

So, its percent composition is 87% bromine and 13% magnesium.

How do you measure density?

Density over mass
Mass over volume
Volume over density
Mass over density

Answers

Answer:

Mass over Volume........

What is the molar mass of carbon?

Answers

the molar mass is 12.011

pleas HELP QUICK!!!!!!!!!!!!!!!!!

Answers

Answer: first is last second is first and 3rd is second

Explanation:

I am listing the order starting with new moon.
New Moon
Waxing Crescent
first quarter
waxing gibbous
full moon
waning gibbous
last quarter
waning crescent
and new moon again.

Answers

Answer:

new Moon.

waxing crescent Moon.

first quarter Moon.

waxing gibbous Moon.

full Moon.

waning gibbous Moon.

last quarter Moon.

waning crescent Moon.

New moon

Explanation:

Your answer is correct

The picture below shows the positions of the Earth, Moon, and Sun during an eclipse.


What is true of the eclipse shown in the picture?
A.
It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
B.
It is a solar eclipse, in which the Earth casts a shadow on the Moon.
C.
It is a lunar eclipse, in which the Moon casts a shadow on the Earth.
D.
It is a solar eclipse, in which the Moon casts a shadow on the Earth.

Answers

Answer:

it is option c liner eclipse

Answer:

A-It is a lunar eclipse, in which the Earth casts a shadow on the Moon.

Which of the following is NOT a compound?
Table salt
Carbon dioxide
Water
Gold

Answers

Answer: Gold.

Explanation: Water, CO2, and table salt are compounds. They are composed of two or more separate elements; a mixture, where as gold is neither.

Gold is not a compound

some students using Apple to represent the Earth what is the best reason to use an Apple for this comparison?​

Answers

Answer:

The skin of the apple is very thin, and the crust of the Earth is very thin.

What is the percent by mass of Nitrogen in Mg(NO3)2?

Answers

Answer:

18.888%

Explanation:

How many atoms of beryllium are equal to 0.39 moles of beryllium?

Answers

Answer:

2.35 x 10²³atoms

Explanation:

Given parameters:

Number of moles of Be  = 0.39moles

Unknown:

Number of atoms  = ?

Solution:

To solve this problem:

                1 mole of a substance contains 6.02 x 10²³ atoms

               0.39 mole of Be will contain 0.39 x 6.02 x 10²³ = 2.35 x 10²³atoms

Applying a force for a longer time increases the change in
(select all that apply)
Weight
Gravity
Velocity
Mass
Momentum

Answers

Answer:

velocity and momentum

Explanation:

as you exert force, the object accelerates, hence, its velocity increases.

since momentum is mass times velocity, the momentum increases too

Please be reminded, this answer may not be 100% correct

When the force should be applied for a long time so it increases the change in velocity and momentum

What is velocity and momentum?

The momentum of the object should be equivalent to the object mass times with the object velocity

Here

p = mv

Here p means momentum

m means mass

v means velocity

Here the momentum should be directly proportional to the mass of the object and for the velocity of the object also.

Learn more about mass here: https://brainly.com/question/1381544

How are gases and liquids different from each other

Answers

Answer:

Gases, liquids, and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. Gas is well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.

Explanation:

Gases can change volume. Liquids cannot

PLEASE HELP ADAP I WILL MARK AS BRAINLYEST

Answers

Answer:

c! Hope this helps!

Explanation:

BRAINLIEST PLZ ;)

Answer:

I think its the third one im not sure tho

Explanation:

a car is running with the velocity of 12 kilometre per hour what will be its velocity after 5 seconds if its acceleration is 2 metre​

Answers

The velocity after 5 second =19 m/s

Further explanation

Given

Initial velocity =vi = 12 km/h=3.3 m/s

Time=t = 5 s

Acceleration=a = 2 m/s²

Required

Final velocity, vf

Solution

Motion with constant acceleration

Can be formulated :

vf=vi+at

Input the value :

vf=3.3+2.5

vf=9+10

vf=19 m/s

The discovery of protons and electrons most directly refuted or replaced the idea that
a. atoms contain a nucleus
b. the atom resembles plum pudding
c. the atom is electrically neutral
d. the atom is indivisible

Answers

The answer is going to be a
B jk the answer is C

Part 1
Observe the image of sodium. List the properties you see.
Part 2
Observe the image of hydrogen chloride. List the properties you see.

Answers

Answer:

Observable properties of sodium from the image:

1. It's slivery-white solid

2. It's shiny and bright

3. Looks soft

4. Looks waxy

Observable properties of hydrogen chloride from the image:

1. It is a colorless liquid

2. It is transparent

Explanation:

Sodium is known to be a metal that is silvery-white and waxy in appearance. The metal is bright and shiny especially when it is cut. It can be cut with a knife due to it soft nature. It is reactive and has low melting point. It actually reacts with water to form sodium hydroxide.

Hydrogen chloride (known to be hydrochloric acid) is a transparent and colorless substance. It is used in manufacturing plastics, textile,  fertilizers, etc. The concentrated hydrogen chloride is very corrosive.

The above are what I can see from the image.

How many moles are in 8.63 x 103 atoms of Li?

Answers

Answer:

1.43 × 10⁻²⁰ mol Li

General Formulas and Concepts:

Math

Pre-Algebra

Order of Operations: BPEMDAS

Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right

Chemistry

Atomic Structure

Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:

Step 1: Define

8.63 × 10³ atoms Li

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Set up:                              [tex]\displaystyle 8.63 \cdot 10^3 \ atoms \ Li(\frac{1 \ mol \ Li}{6.022 \cdot 10^{23} \ atoms \ Li})[/tex]Multiply/Divide:                [tex]\displaystyle 1.43355 \cdot 10^{-20} \ moles \ Li[/tex]

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

1.43355 × 10⁻²⁰ mol Li ≈ 1.43 × 10⁻²⁰ mol Li

(Help if you know) What is one way land helps reduce the force of a hurricane as it moves inland?
A) land stabilizes the sediment forced on shore
B) Land filters the water forced up from the sea by the wind
C) Land acts as a bumpy surface that absorbs wind power
D) land absorbs the rainwater

Answers

i’m pretty sure it’s C bc the more bumpy the land is the slower the hurricane goes

A heterogeneous mixture that has very small dispersed particles and stays mixed for a long time is a____. it for science class

Answers

The heterogeneous mixture that has very small dispersed particles and stays mixed for a long time is colloid. Because colloid has particles that are small enough to suspended but are as large that they can scatter light.

what volume of a 6.0% W/V glucose (C6H6O6) solution can be prepared using 185g of glucose?

Answers

Volume of solution : = 3083.3 ml = 3.0833 L

Further explanation

Given

a 6.0% w/v

185 g of glucose

Required

Volume of solution

Solution

% w/v : the mass of solute in a volume of solution or 1 g solute in 100 ml of solution

Can be formulated :

% w/v = (mass solute(g) : volume solution(ml)) x 100

Mass of solute = mass of glucose = 185 g

The volume of solution :

= 185 g : 0.06

= 3083.3 ml

= 3.0833 L

Please Help Quick!!!

Lewis Structure of PO3 3-

Answers

1. Find its coordination figure/coordination number of central atom (CF)

Ev = Vallence electron of central atom

Σe = electrons donated from substituents

Terminal O gives 0 electrons, hence Σe = 3 x 0

charge = charge of the compound

2. Find EP (electron pairs) and LP (lone pairs)

LP = CF - EP

3. Draw the skeleton with octet substituents (top right figure)

4. Find formal charge for each atoms (Qf)

5. Write formal charge near atom in skeleton

6. Enjoy

How can you ensure the chemical reaction produces the right amount of heat in a hot pack without hurting you?

Answers

Answer:

Heat packs that contain iron and water packets: Exposing the solution to air results in the oxidation of the iron (creates rust). The oxidation of the iron is an exothermic process. Heat packs that contain supersaturated sodium acetate: These are reusable, the packs are boiled to dissolve sodium acetate.

Explanation:Thanks for asking question

Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical

Answers

Answer:

electrical --> light

Explanation:

If I have ten eggs and lots of milk, flour and oil, how many
crepes can I make?

Answers

Answer:

I'd say about 8?

Explanation:

if you wanna make them huge make about 6

According to the chemical formula shown below, all of the following elements are found in phosphoric acid EXCEPT

A. Hydrogen
B.Oxygen
C.Phosphorus
D.Potassium
Please asap i need help

Answers

I think C but it could be B as well

Cynthia has 200kg of magnesium. Calculate how much MgCl2 she can make.

Mg + Cl2 = MgCl2

Answers

Answer:

784.4kg

 

Explanation:

Given parameters:

Mass of Mg  = 200kg

Unknown:

Mass of MgCl₂  = ?

Solution:

  The reaction equation is given as:

            Mg  +  Cl₂ →   MgCl₂

Find the number of moles of the given specie;

  Number of moles of Mg = [tex]\frac{mass}{molar mass}[/tex]   = [tex]\frac{200000}{24.3}[/tex]   = 8230.5mole

So;

   1 mole of Mg will produce 1 mole of MgCl₂

 

   8230.5mole of Mg will produce 8230.5mole of MgCl₂

Mass of MgCl₂   = number of moles x molar mass

                    Molar mass of MgCl₂  = 24.3 + 2(35.5) = 95.3g/mol

 Mass of MgCl₂   = 8230.5mole x  95.3g/mol  = 784.4kg

 

In _____ , materials move from an area of higher concentration to an area of lower concentration through a cell membrane.
1.selective permeability
2.active transport
3.passive transport

Answers

Answer = 1.selective permeability

A 1.0 kg ball is thrown into the air and initial velocity of 30 mi./s how high into the air did the ball travel

Answers

Answer:

45.9m

Explanation:

Given parameters:

Mass of the ball  = 1kg

Initial velocity  = 30m/s

Unknown:

Height the ball will travel  = ?

Solution:

At the maximum height, the final velocity of the ball  will be 0;

  Using ;

   V²   = U²   - 2gh

V is the final velocity

U is the initial velocity

g is the acceleration due to gravity

h is the height

     0² = 30²   - (2 x 9.8 x h)

    0 = 900 - 19.6h

      h  = 45.9m

Fossils can be found all over the world, often in layered rock formations. To determine the age of the rock layers within an
area, geologists and paleontologists use a technique called radiometric dating. Determining the age of a rock layer allows
scientists to determine the age of the fossils within it.
Some of the more exciting fossil discoveries are of dinosaurs, which existed on Earth between 230 and 65 million years
ago. Examine this map e. Click the map to zoom in, and drag the magnifying glass for a closer look. The map shows
where prehistoric rocks formed during the Triassic, Jurassic, and Crustaceous time periods, the same periods when
dinosaurs walked on Earth. Based on the map, what is the closest location to you where dinosaurs are likely to have lived?

Answers

Answer: Western USA.

Answer:

the answer is the question itself

Explanation:

Other Questions
When one mineral scratches another, it is1. a 1 on the Mohs scale.2.softer than the mineral is scratches3.harder then the mineral is scratches.1.equally as hard as the mineral it scratches. Outlines use____ to identify various levels of information. A numbers. B Roman Numerals . Cletters . Dall of theseThis is from leadworthy also plss help Consider the following code segment.firstList + ["guitar", "drums", "bass"]secondList + ["flute", "violin"]thirdList = []thirdList + firstListfirstList secondListsecondlist thirdListWhat are the contents of secondList after the code segment is executed?[]00["guitar", "drums", "bass"]["flute", "violin"]D["flute", "violin", "guitar", "drums", "bass"] What is the relationship between a database and an information system and what impact does this relationship have on database design?Respond to one or both of the following statements:a. It is impossible to produce good information from poor data.b. No matter how sophisticated the application programs are, it is impossible to use good application programs to overcome the effects of bad database design. need help in physices please help PLEASE HELP IM HEING TIMED Why have you decided they're not goc- Propose two "rules" or guidelines for writing please help asap. thank you very much 6. During the migratory process of the first groups in the American continent,These lost contact with each other and different cultures arose, housing construction,dress, etc. a. True b. False Which of the following is NOT a peripheral? Keyboard USB storage drive Printer CPU Select the correct text in the passage.Read this excerpt from Narrative of Sojourner Truth. Which phrase provides a context clue that helps determine the meaning of the word ascertain?She thought it never was so light before; indeed, she thought it much too light. She stopped to look about her, and ascertain if her pursuers were yet in sight. No one appeared, and for the first time, the question came up for settlement, 'Where, and to whom , shall I go?' Fix the sentence below Now, more than ever, athletes need to follow directions from trained doctors physicaltherapists and certified trainers,A trained doctors, physical therapists, and certified trainersB trained doctors, physical therapists and, certified trainersC correct as is journal entry medieval knight Which recent discovery led to a new understanding of how genetic mutations increase the risk of cancer? double helix structure of DNA BRCA1 and BRCA2 genes nucleic acid monomers formation of tumor suppressor proteins When you summarize a book, you find its essentials. You think about what you've read anddecide what matters most. That's why summarizing builds critical thinking skills.Summarizing can help you focus on the most important parts of a text and keep themorganized in your head. It makes it easier to understand and remember what you're reading.According to this passage, why are you building critical thinking skills when yousummarizeSee What is the solution to the problem below? I will give brainliest please help Please help meeeeeeeeeeeeeeee The game world plays a crucial role in bringing the game story to life and often acts as a bridge between what two elements?A) the game title and resolution B) characters and their powersC) internal conflict and external conflict D) game mechanics and game story hewo fwiends !!What is the different between Kinetic Energy and Kinetic Potential Energy???