This force will cause the path of the particle to curve. Therefore, at a later time, the direction of the force will ____________. This force will cause the path of the particle to curve. Therefore, at a later time, the direction of the force will ____________. have a component along the direction of motion remain perpendicular to the direction of motion have a component against the direction of motion first have a component along the direction of motion; then against it; then along it; etc.

Answer:

Answer:

the speed of the textbook just before it hits the floor is 2.4 m/s

Explanation:

  Given the data in the question;

mass of pulley = 1.50 kg

radius of pulley = 0.240 m

mass of text book = 2.0 kg

height from which text book was released = 0.9 m

angular speed of the pulley = 10.0 rad/s

the speed of the textbook just before it hits the floor = ?

the speed of the textbook v = angular speed of the pulley × radius of pulley

we substitute

v = 10.0 rad/s × 0.240 m

v = 2.4 m/s

Therefore, the speed of the textbook just before it hits the floor is 2.4 m/s

Answer:

λ = a

Explanation:

This is a diffraction exercise that is described by the expression

          a sin θ = m λ

         sin θ  = m λ/ a

the first zero of the diffraction occurs for m = 1

        sin θ  = λ / a

angles are generally very small and are measured in radians

         sin θ  = θ  = y / x

we substitute

         [tex]\frac{y}{x} = \frac{\lambda}{a}[/tex]

the width of the central maximum is twice the distance to zero

         w = 2y

in the exercise indicate that this width is equal to twice the distance to the screen (2x)

          W = 2x

           2y = 2x

we substitute

          1 = λ/ a

          λ = a

we see that the width of the slit is equal to the wavelength used.

Answer:

i believe its temperate

Explanation:

The climate zone that has hot summers, cold winters, and average amounts of precipitation throughout the year is the temperate climate zone. So, option C is correct.

Climatic zones are defined as the areas that have different climatic conditions over the world.

Here,

The climate zone that hot summers, cold winters and average amounts of precipitation throughout the year is the temperate climate zone.

The temperate climate zones are the areas that have mild temperature condition that are located between the subtropical and the polar regions. These are zones with moderate rainfall that is throughout the year. The temperature in this zone will change greatly between the summer and winter seasons. These zones are hotter during the summer and very cold during the winter.

The temperate zone has an average precipitation of 800 mm.

Hence,

The climate zone that has hot summers, cold winters, and average amounts of precipitation throughout the year is the temperate climate zone.

To learn more about climate zone, click:

https://brainly.com/question/1080277

#SPJ2

Answer:

The answer is B

Explanation:

Answer:

car B will be 30 Km ahead of car A.

Explanation:

We'll begin by calculating the distance travelled by each car. This is illustrated below:

For car A:

Speed = 40 km/h

Time = 3 hours

Distance =?

Speed = distance / time

40 = distance / 3

Cross multiply

Distance = 40 × 3

Distance = 120 Km

For car B:

Speed = 50 km/h

Time = 3 hours

Distance =?

Speed = distance / time

50 = distance / 3

Cross multiply

Distance = 50 × 3

Distance = 150 Km

Finally, we shall determine the distance between car B an car A. This can be obtained as follow:

Distance travelled by car B (D₆) = 150 Km

Distance travelled by car A (Dₐ) = 120 Km

Distance apart =?

Distance apart = D₆ – Dₐ

Distance apart = 150 – 120

Distance apart = 30 Km

Therefore, car B will be 30 Km ahead of car A.

Answer:

A. harmful substances in the air, water, or soil

hope my ans helps

be sure to follow me

stay safe

have a good day

The ratio of the average speed of the helium atoms to the average speed of the neon atoms is 5 to 1 C.

We have that for the Question, it can be said that the ratio of the average speed of the helium atoms to the average speed of the neon atoms is

5:1

Option B

From the question we are told

An empty container is filled with helium to a pressure P at a temperature T. Neon, which has atoms that are 5 times more massive than those of helium, is then added to the container until the new pressure in the container is 2P at the same temperature T. The ratio of the average speed of the helium atoms to the average speed of the neon atoms is:_________

a. 25 to 1

b. 5 to 1

c. 5to 1

d. 2to 1

e. 1 to 1

Generally the equation for the average speed of Molecules  is

mathematically given as

[tex]For Helium\\\\C_h=\frac{8P_hV_h}{\pim_h}\\\\Neon gas\\\\C_n=\frac{8P_nV_n}{\pim_n}\\\\Where\\\\Ph=P_n\\\\Vh=Vn\\\\[/tex]

[tex]\frac{C_h}{C_n}=\frac{\frac{8P_hV_h}{\pim_h}}{\frac{8P_nV_n}{\pim_n}}[/tex]

[tex]\frac{C_h}{C_n}=\sqrt{\frac{\frac{1}{5}}{{\frac{1}{5}}}[/tex]

[tex]\frac{C_h}{C_n}=\sqrt{\frac{5}{1}[/tex]

Therefore

The ratio of the average speed of the helium atoms to the average speed of the neon atoms is

5:1

For more information on this visit

https://brainly.com/question/23379286

Answer:

sudden cardiac arrest

Explanation:

Answer:

Solid sphere

Explanation:

According to the given situation, the solid sphere would contain the less moment of inertia because it would carry large mass that closed to the axis of rotation

Also if there is a less moment of inertia so there would be high angular acceleration under a torque

α = τ/I

So the solid sphere would reach a speed of 10 rad/s first

Answer:

Drink water at least every 5 to 20 minutes while exercising in hot weather.

Explanation:

Hope this helps brainliest please

Answer:

1 astronomical unit, or AU, is the average distance from the Earth to the Sun; that's about 150 million km. So, Neptune's average distance from the Sun is 30.1 AU. Its perihelion is 29.8 AU, and it's aphelion is 30.4 AU.

Short Answer: it is 29

Explanation:

sorry if its wrong

Answer:

29

Explanation:

I just took a test! not only that but the other person who answered this question had the corrected answer.

Answer:

FORCE as for my answer....

Answer:

Table A

Measuring Current as a Function of Voltage with a 20 Ω Resistor

Voltage

(V)

Current: Calculated

(A)

Current: Experimental

(A)

1 0.05 0.05

5 0.25 0.25

10 0.50 0.50

20 1.00 1.00

50 2.50 2.50

Table B

Measuring Current as a Function of Resistance at 25 V

Resistance

(Ω)

Current: Calculated

(A)

Current: Experimental

(A)

10 2.50 2.50

20 1.25 1.25

100 0.25 0.25

200 0.12 0.12

Table C

Measuring Current in a Parallel Circuit

Resistor Set

(Ω)

Total  

Resistance

(Ω)

Calculated

Current

(A)

Observed  

Current

(A)

Observed Current  

through Each Resistor

(A)

20, 20, 20 6.67 3.75 3.74 1.25, 1.25, 1.25

20, 20, 200 9.52 2.63 2.62 1.25, 1.25, 0.12

Voltage needed to raise current to 3.75 A (20, 20, 200 resistor set):

Calculated: 35.7

Observed: 36

Table D

Calculating Power of Circuit ComponentsTeacher Guide (continued)

Observed Total Current

(A)

Current through Each Bulb

(A)

Power Usage per Bulb

(W)

2.00 0.67 6.7

Explanation:

got this from the teachers guide

Answer:

B = 1.37 mT

Explanation:

Given that,

The magnitude of the electric field, E = 480 N/C

The speed of the proton, [tex]v=3.50 \times 10^5\ m/s[/tex]

We need to find the magnitude of the magnetic field. In a velocity selector, the electric field is balanced by the magnetic field. So,

[tex]qE=qvB[/tex]

Where

B is the magnetic field

[tex]B=\dfrac{E}{v}\\\\B=\dfrac{480}{3.5\times 10^5}\\\\B=1.37\times 10^{-3}\ T\\\\or\\\\B =1.37\ mT[/tex]

So, the magnetic field is equal to 1.37 mT.

Answer:

w = w₀ / 2    the angular velocity is half the initial value.

Explanation:

We can analyze this exercise as if we added another disk to obtain a disk with twice the mass, for which if the system is two disks, the angular tidal wave is conserved

initial instant.

          L₀ = I₀ w₀

final moment

          L_f = I w

the moment is preserved

          L₀ = L_f

          I₀ w₀ = I w

the moment of inertia of a disk is

         I = ½ m R²

we substitute

          ½ m R² w₀ = ½ (2m) R² w

          w = w₀ / 2

for the case of a disk with twice the mass, the angular velocity is half the initial value.

Answer:

B

Explanation:

Answer:

a) < 3 , -4 >

b) < 3 , -4 >

Explanation:

a) If you can imagine this, adding vectors is like putting them "tip to tail", where you put the beginning point of vector B to the end point of vector A (or vice versa).  Your new vector (A+B) would be from the "tip" of vector A to the "tail" of vector B.

Mathematically, this is the same as adding the x-components of each vector together as well as the y-components.

Vector A: 3 units along the positive x-axis: < 3 , 0 >

Vector B: 4 units along the negative y-axis: < 0 , -4 >

A+B = < 3 , 0 > + < 0 , -4 > = < (3+0) , (0+(-4)) > = < 3 , -4 >

b) Subtracting is like adding a negative, so you could use the same "tip to tail" visual by adding the negative of vector B instead (which is B in the opposite direction).

Vector A: < 3 , 0 >

Vector B: < 0 , -4 >

Vector -B: < 0 , 4 >

A-B = A+(-B) = < 3 , 0 > + < 0 , 4 > = < (3+0) , (0+4) > = < 3 , 4 >

Answer:

ozone, letter b

ozone is basically an allotrope of oxygen having three atoms instead of two.

Answer:

is there supposed to be a picture?

Explanation:

The correct order of the springs in increasing spring constant is: W, Y, X, Z. The correct option is A.

Spring constant, also known as force constant or stiffness, is a measure of the resistance of a spring to deformation when a force is applied to it. It is defined as the amount of force required to stretch or compress a spring by a given distance.

The formula for the spring constant is:

k = F/x

Where

k = is the spring constant,

F = is the applied force,

x =is the displacement or deformation of the spring.

The unit of spring constant is newtons per meter (N/m) in the SI system of units, or pounds per inch (lb/in) in the Imperial system.

A higher spring constant means that a spring is stiffer and requires more force to be stretched or compressed by a given distance. A lower spring constant means that a spring is more flexible and requires less force to be stretched or compressed by a given distance. The spring constant is an important property of springs, which are used in various applications, such as in suspension systems, mattresses, and mechanical watches.

Here in the Question,

In order to determine the order of increasing spring constant, we need to compare the given springs and see which one requires more force to stretch or compress.

Therefore, The correct order of the springs in increasing spring constant is: W, Y, X, Z. This is because the spring constant increases as we move from W to Z.

To learn about Strain gauges click:

https://brainly.com/question/31172851

#SPJ7

Answer:

It is because of air pressure

Explanation:

Filling a fountain pen with ink involves various methods, but the most common approach uses a piston or converter mechanism.

To begin, the pen is prepared by removing the cap and separating the barrel from the grip section. The type of filling system is checked, whether it's a built-in piston or a removable converter.

For a piston-filling method, the knob is twisted counterclockwise to retract the piston. The nib is submerged in the ink bottle, and by turning the knob clockwise, the piston extends, creating a vacuum that draws ink into the reservoir through capillary action.

The piston is then retracted, sealing the ink inside. In the case of a converter, it is removed from the grip section and dipped into the ink bottle, followed by operating the plunger or squeezing to expel air.

Releasing the plunger allows ink to enter the converter through atmospheric pressure. After cleaning any excess ink, the pen is reassembled.

Know more about fountain pen:

https://brainly.com/question/17340241

#SPJ4

Initially, the energies are:

[tex]U_{i}=-\frac{G M_{\varepsilon} m}{r_{e}} \\ =K_{i}=\frac{1}{2} m v_{0}^{2}[/tex]

At final point, the energies are:

[tex]U_{f}=-\frac{G M_{\varepsilon} m}{r_{e}+h} \\ K_{f}=\frac{1}{2} m(0)^{2}=0[/tex]

Using conservation law of energy,

[tex]-\frac{G M_{e} m}{r_{e}}+\frac{1}{2} m v_{0}^{2} &=-\frac{G M_{e} m}{r_{\varepsilon}+h} \\ -\frac{G M_{e}}{r_{e}}+\frac{v_{0}^{2}}{2} &=-\frac{G M_{e}}{r_{e}+h} \\ \frac{-2 G M_{e}+r_{e} v_{0}^{2}}{2 r_{e}} &=-\frac{G M_{e}}{r_{e}+h} \\ \frac{r_{e}+h}{G M_{e}} &=\frac{2 r_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}[/tex]

The equation is further simplified as:

[tex]r_{e}+h &=\left(\frac{2 r_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}\right) G M_{e} \\ h &=\frac{2 r_{e} G M_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}-r_{e} \\ &=\frac{2 r_{e} G M_{e}-2 r_{e} G M_{e}+r_{e}^{2} v_{0}^{2}}{2 G M_{e}-r_{e} v_{0}^{2}} \\ & h=\frac{r_{e}^{2} v_{0}^{2}}{2 G M_{e}-r_{e} v_{0}^{2}}[/tex]

Answer:

1. grass Can survive by itself because it is not dependent on food, it is self-sustaining. and since grass it's not dependent on food it is a producer.

2. and 3. they would all decrease, since the prairie dogs are herbivores they eat basically plants such as grass and if half of the grass is gone then they would have less to eat and therefore decrease.

since ferrets eat prairie dogs, if the prairie dogs population decreases the ferrets would have less to eat and therefore decrease as well.

one of the predators of ferrets are foxes and if the ferrets decrease then the fox would also decrease since it will have less to eat.

4. if we would continue advancing years soon the ferret, prairie dogs and foxes would be no more because if there is less grass they would keep on decreasing over the years until they would be extinct.

Answer:

The basic properties (parts) of a wave include: frequency, amplitude, wavelength and speed. Frequency is a measure of how many waves pass a point in a certain amount of time.

Answer:

636.6 W/m²

Explanation:

From the given information:

The area of the circular spot can be calculated as:

A = πr²

A = π(0.5 × 10⁻³ m)²

A = 7.85 × 10⁻⁷ m²

The intensity can be determined by using the formula:

[tex]I = \dfrac{P}{A}[/tex]

[tex]I = \Big ( \dfrac{0.500 \ mW}{\pi (0.5 \times 10^{-3} \ m )^2} \Big) \Big( \dfrac{10^{-3} \ W}{1\ mW} \Big)[/tex]

[tex]I = \dfrac{0.500 \times 10^{-3} }{\pi(0.25 \times 10^{-6} )}[/tex]

I = 636.6 W/m²

Answer:

5 watts

power = work done ÷ time taken

10 j ÷ 2 = 5w

Answer: Newtons third law

Explanation: According to Newton's third law of motion, forces always act in equal but opposite pairs. Another way of saying this is for every action, there is an equal but opposite reaction. This means that when you push on a wall, the wall pushes back on you with a force equal in strength to the force you exerted.

Newton's third law we find that the reaction to the force is an out applied by the putting door towards to the person.

given parameters

to find

Newton's third law states that the forces between bodies always occur in pairs, that is, the two bodies interacting with each other, therefore these forces are of equal magnitude, but opposite direction. Consequently each force acts on one of the bodies, these forces are called action and reaction.

By applying Newton's third law to the open door; we exert a force on the door therefore the door exerts a force of equal magnitude, but opposite direction on us.

Using Newton's third law we find that the reaction to the force is an out applied to the person.

Learn more about Newton's third law here:  brainly.com/question/23772134