The particle model shows the image of the moving object.


TRUE OR FALSE


ANSWER AND I WILL GIVE YOU BRAINILIEST

Answers

Answer 1

Answer:

it does show the objects position


Related Questions

This is about acceleration, velocity and all that mumbo jumbo

Which best depicts the data?

1, From 0 to 2 seconds, Anna experienced negative acceleration.
2, From 3 to 6 seconds, Elan accelerated while Anna did not.
3, From 6 to 8 seconds, Elan accelerated faster than Anna.
4, From 8 to 10 seconds, Elan experienced negative acceleration.

Answers

Answer:

[tex]3. \: From \: 6 \: to \: 8 \: seconds, \: Elan \: \\ accelerated \: \: faster \: than \: Anna. [/tex]

why cats cannot run on smoth table​

Answers

Answer:

bc of their paw pads, they don't get the traction they need in order to be able to get a firm grip to push off of on the table for each bound

Explanation:

One end of a horizontal string is attached to a vibrating blade, and the other end passes over a pulley as in Figure (a). A sphere of mass 1.00 kg hangs on the end of the string. The string is vibrating in its second harmonic. A container of water is raised under the sphere so that the sphere is completely submerged. In this configuration, the string vibrates in its second harmonic (or the third normal mode of oscillation) as shown in Figure (b). What is the radius of the sphere?

Answers

Answer:

when it weighs 2kg it is 7.38

Explanation:

hope this helps

What is a factor in an experiment that can be changed or it can be kept the same?

Answers

Answer:  If you are performing an experiment on the effect of spraying plants with different chemicals, you would try to maintain the same pressure and maybe the same volume when spraying your plants. The independent variable is the one factor that you are changing. It is one factor because usually in an experiment you try to change one thing at a time.

Explanation:

the wire is 5.20 cm from the charge and carries a current of 68.5 A in a direction opposite to that of the moving charge. Calculate the magnitude of the force on the charge.

Answers

Complete Question

A 6.00-µc charge is moving with a speed of 7.50x10^4 m/s parallel to a very long, straight wire. the wire is 5.20 cm from the charge and carries a current of 68.5 A in a direction opposite to that of the moving charge. Calculate the magnitude of the force on the charge.

Answer:

The value is [tex]F =1.20 *10^{-4} \ N[/tex]

Explanation:

From the question we are told that

     The magnitude of the charge is  [tex]Q = 6.00\muC = 6.00 *10^{-6} \ C[/tex]

      The speed is  [tex]v = 7.50 *10^{4} \ m/s[/tex]

      The distance of the wire from the charge is  [tex]d = 5.20 \ cm = 0.0520 \ m[/tex]

       The current flowing through the wire in the opposite direction to the charge  is  [tex]I _2 = 68.5 \ A[/tex]

  Gnerally the magnitude of force on that charge is mathematically represented as

      [tex]F = qvB[/tex]

Here B is magnetic field which is mathematically represented as

              [tex]B = \frac{\mu_o * I}{2\pi d}[/tex]

Here  [tex]\mu_o[/tex] is the permeability of free space with value  [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]

 So

       [tex]F = qv[\frac{\mu_o * I}{2\pi d}][/tex]

=>     [tex]F = 6.0*10^{-6} * (7.50 *10^{4})[\frac{4\pi * 10^{-7} * 68.5 }{2* 3.142 * 0.0520 }][/tex]      

=>    [tex]F =1.20 *10^{-4} \ N[/tex]

 

what are Newton's 3 laws

Answers

Answer:

Newton 3 laws

Explanation:

1.object will not change its motion unless a force acts on it . 2.the force on an object is equal to it's time mass on acceleration. 3. When 2 o jecys interact they apply forces to each other of equal.

Answer- In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
Hope this helps:)

When a 600 g mass is suspended from a spring, the spring stretches 1.2 cm. What is the spring constant of the spring? ​

Answers

Well first you need to know the formula for the spring force. It’s -1/2k*d

K being the constant

D being the displacement

We can actually find the force on the spring by calculating the weight of the block. It would be mass multiplied by gravity, convert the grams to kilograms first tho.

600/1000 = 0.6kg

0.6kg * 9.8 m/s^2 = 5.88N

Now plug everything into the equation, also convert the centimeters to meters:

1.2/100 = 0.012 meters

5.88 = -1/2k*(0.012)

5.88 = k*(0.006)

We could drop the negative sign because we really just want the magnitude of the spring constant.

K = 980N

A mountain biker is climbing a steep 20° slope at a constant speed. The cyclist and bike have a combined weight of 800 N. What can you say about the magnitude of the normal force of the ground on the bike?

Answers

Answer:

Normal force = 751.75 N

Explanation:

It is given that,

The combined weight of the cyclist and the bike is 800 N

We need to find the magnitude of the normal force of the ground on the bike. It can be given by the formula as follows :

[tex]N=mg\cos\theta[/tex]

mg = W, combined weight of cyclist and bike

[tex]N=W\cos\theta\\\\N=800\times \cos(20)\\\\N=751.75\ N[/tex]

So, the magnitude of the normal force of the ground on the bike is 751.75 N.

The magnitude of the normal force of the ground on the bike is 751.752 N

The formula for that will be used to calculate the normal force of the ground on the bike is expressed as:

[tex]N= Fcos \theta[/tex]

F is the combined weight

[tex]\theta[/tex] is the angle of inclination

Given the following paramters

F = 800 N

[tex]\theta[/tex] = 20 degrees

Substitute the given parameters into the formula:

[tex]N=800 \times cos20^0\\N=800 \times 0.9397\\N=751.752N[/tex]

Hence the magnitude of the normal force of the ground on the bike is 751.752 N

Learn more here: https://brainly.com/question/12408868

What would be the speed of an object just before hitting the ground if dropped 91.5 meters

Answers

Answer:

about 42.35 m/s

Explanation:

Use the equation for accelerated motion (g), and with zero initial velocity that doesn't include time:

[tex]v_f^2=v_i^2+2\,a\,\Delta x[/tex]

which for our case would reduce to:

[tex]v_f^2=v_i^2+2\,a\,\Delta x\\v_f^2=0+2\,9.8\,(91.5)\\v_f^2= 1793.4\\v_f=\sqrt{1793.4} \\v_f \approx 42.35[/tex]

then the velocity just before hitting would be about 42.35 m/s

An airplane flying at 119 m/s is accelerated uniformly at the rate of 0.5 m/s2 for 10
seconds. What is its final speed?

Answers

Answer:

124m/s

Explanation:

v=u+at

v=119+(0.5×10)

v=119+5

v=124m/s

A 10 [kg] object is dropped from rest. a. How far will it drop in 2 [s]?

Answers

Answer:

y=0.5 g t^2

=0.5*10*2^2

=20 m

Imagine that you throw a rock into the air. When you release the rock, it is moving at 19.4 m/s. The rock flies straight up into the air and returns back to your hand. For how long was the rock in the air? Note: acceleration due to gravity is -9.81 m/s/s.

Answers

Answer:

4 s

Explanation:

The following data were obtained from the question:

Initial velocity (u) = 19.4 m/s.

Acceleration due to gravity (g) = –9.81 m/s²

Total time (T) =.?

Next, we shall determine the time take by the rock to get to the maximum height. This can be obtained as follow:

NOTE: At maximum height, the final velocity is zero.

Initial velocity (u) = 19.4 m/s.

Acceleration due to gravity (g) = –9.81 m/s²

Final velocity (v) = 0 m/s

Time taken to reach the maximum height (t) =.?

v = u + gt

0 = 19.4 + (–9.81 × t)

0 = 19.4 – 9.81t

Collect like terms

0 – 19.4 = –9.81t

–19.4 = –9.81t

Divide both side by –9.81

t = –19.4 / –9.81

t ≈ 2 s

Thus, it took approximately 2 s for the rock to reach its maximum height.

Finally, we shall determine the total time spent by the rock in the air as follow:

Time taken to reach the maximum height (t) = 2 s

Total time spent in air (T) =?

The total time (T) spent by the rock in the air will be two times the time taken (t) to reach the maximum height i.e

T = 2t

t = 2 s

T = 2 × 2

T = 4 s

Therefore, the rock spent approximately 4 s in the air.

Which example illustrates Newton's first law?

Answers

Answer: The motion of a ball falling down through the atmosphere, or a model rocket being launched up into the atmosphere are both examples of Newton's first law. The motion of a kite when the wind changes can also be described by the first law.

Explanation:

Select the correct answer.
Which scientist discovered the relationship between electricity and magnetism?
OA.
Nikola Tesla
OB
Alessandro Volta
OC.
Hans Christian Oersted
OD
Isaac Newton

Answers

Answer:

Hans Christian Oersted

Explanation:

Which of the following choices is not part of the scientific method

Answers

Answer:

What are the choices?

Explanation:

Compact fluorescent bulbs are much more efficient at producing light than are ordinary incandescent bulbs. They initially cost much more, but last far longer and use much less electricity. According to one study of these bulbs, a compact bulb that produces as much light as a 100 W incandescent bulb uses only 23.0 W of power. The compact bulb lasts 10000 hours, on the average, and costs $ 12.00, whereas the incandescent bulb costs only $ 0.76, but lasts just 750 hours. The study assumed that electricity cost $ 0.090 per kilowatt-hour and that the bulbs were on for 4.0 h per day.

Required:
a. What is the total cost (including the price of the bulbs) to run each bulb for 3.0 years?
b. How much do you save over 3.0 years if you use a compact fluorescent bulb instead of an incandescent bulb?
c. What is the resistance of a "100-W" fluorescent bulb?

Answers

Answer:

a

[tex]The  \ price \  for \   Compact\ fluorescent\ bulbs \ is  \ C_T  = \$ 21.067\\The   \ price \  for \    incandescent\ bulb \ is \ C_t  = \$ 43.98[/tex]

b

[tex]The \  amount  \  saved \ is  \ C_S =  \$ 22.913[/tex]

c

[tex]The \ resistance \  is \ R =  626.1 \Omega[/tex]

Explanation:

From the question we are told that

   The power used by incandescent bulb [tex]P_r  =  23.0 W[/tex]

    The power used by  Compact fluorescent bulb [tex]P_p  =  100W[/tex]

     The life span of  Compact fluorescent bulb is  [tex]t = 1000 \  hours[/tex]

    The  prices of   Compact fluorescent bulb is [tex]C_c = \$ 12 [/tex]

    The  prices of incandescent bulb is [tex]C_i = \$ 0.76 [/tex]

     The life span of   incandescent bulb is  [tex]t_k = 750   \ hours[/tex]

      The cost of electricity is [tex]C_e =  \$ 0.090/ kilowatt-hour = \frac{0.090}{1000} = \$0.00009 / W / h[/tex]

    The duration of daily bulb usage is [tex]t_d  =  4 \  hours[/tex]

     

Generally 3 years of bulb usage  in hours is mathematically evaluated as

    [tex]t_3 =  3 *  365 *  t_d[/tex]

=>   [tex]t_3 =  3 *  365 *  4[/tex]

=>   [tex]t_3 =  4380 \ h [/tex]

Generally the cost to power a 23W bulb for the above duration  is mathematically represented as

 [tex]Z = 23 *  t_3 * C_e[/tex]

=>   [tex]Z = 23 *  4380 * 0.00009[/tex]

=>   [tex]Z = \$ 9.0667[/tex]

The number of Compact fluorescent bulbs required to  achieve this about of time is mathematically represented as

       [tex]N  =  \frac{t_3}{ t}[/tex]

=>  [tex]N  =  \frac{4380}{1000}[/tex]

=>   [tex]N  = 0.438 [/tex]

=>  [tex]N  \approx  1 [/tex]

The total cost of  usage  for the Compact fluorescent bulb   is  mathematically represented as

      [tex]C_T  =  Z +C_c[/tex]

=>   [tex]C_T  =  9.0667 +12[/tex]

=>   [tex]C_T  = \$ 21.067 [/tex]    

The number of  incandescent bulbs required to  achieve this about of time is mathematically represented as

       [tex]M =  \frac{t_3}{ t_k}[/tex]

=>  [tex]M  =  \frac{4380}{750}[/tex]

=>   [tex]M  = 6 [/tex]

Generally the cost to power a 100W bulb for the above duration  is mathematically represented as

 [tex]Z = 100 *  t_3 * C_e[/tex]

=>   [tex]Z = 100 *  4380 * 0.00009[/tex]

=>   [tex]Z = \$ 39.42[/tex]

The total cost of  usage  for the incandescent bulbs    is  mathematically represented as

      [tex]C_t  =  C_e + [6 *C_i][/tex]

=>   [tex]C_t  =  39.42 + [0.76 *  6][/tex]

=>   [tex]C_t  = \$ 43.98[/tex]    

Generally the total amount saved is mathematically represented as

   [tex]C_S =  C_t - C_T[/tex]

=>   [tex]C_S =  43.98 - 21.067[/tex]

=>   [tex]C_S =  \$ 22.913[/tex]

Generally the resistance of the Compact fluorescent bulb is  

    [tex]R =  \frac{V^2}{P}[/tex]

    [tex]R  =  \frac{120^2}{23}[/tex]

[tex]R =  626.1 \Omega[/tex]

A net force of 275 N accelerates a 18.0 kg mass. What is the resulting acceleration? (5 points)

Answers

Answer:

The answer is 15.28 m/s²

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

where

m is the mass

f is the force

We have

[tex]a = \frac{275}{18} \\ = 15.277777...[/tex]

We have the final answer as

15.28 m/s²

Hope this helps you

What kind of workplace is a mine?

Answers

For gold
For lithium
For Crystals
For coal
For silver
For minerals
For uranium

A fundraising company agrees to donate an extra $75 for every $100 the school raises through selling cookies. Part A: What is the constant of proportionality

Answers

Answer:

3/4 0r 0.75

Explanation:

Let E represent the extra cash.

Let R represent the amount raised.

From the question given above, we can say that:

The extra cash (E) is directly proportional to the amount raised (R) i.e

Extra cash (E) ∝ Amount raised (R)

E ∝ R

E = KR

NOTE: K is the constant of proportionality.

With the above formula, we can obtain the value of K as follow:

Extra cash (E) = $ 75

Amount raised (R) = $ 100

Constant of proportionality (K) =?

E = KR

75 = K × 100

Divide both side by 100

K = 75/100

K = 3/4 0r 0.75

Thus, the constant of proportionality is 3/4 0r 0.75


What is the average velocity of a boy moving from initial position of 4 m to a final position of 8 min 20 s. Show steps of solving:


please please heeeeelp​

Answers

9514 1404 393

Answer:

  0.2 m/s

Explanation:

The average velocity is the change in position divided by the change in time:

  (8 m -4 m)/(20 s) = (4/20) m/s = 1/5 m/s = 0.2 m/s

The boy's average velocity is 0.2 m/s.

Calculate the magnetic field at the center of a circular current loop of radius R divided by the magnetic field at a distance R away from a very long straight wire carrying the same current value I. (Note the loop and wire are not in electrical contact.)

Answers

Answer:

The magnetic field at the center of a circular current loop of radius R divided by the magnetic field at a distance R away from a very long straight wire carrying the same current value I is [tex]\pi[/tex] or 3.14

Explanation:

The magnetic field at center of a circular loop is given by

[tex]B = \frac{\mu _{o}I }{2R}[/tex]

Where B is the magnetic field

[tex]\mu _{o}[/tex] is the free space permeability constant ( [tex]\mu _{o}[/tex] = 4π × 10⁻⁷ N/A²)

[tex]I[/tex] is the current

and [tex]R[/tex] is the radius

For the magnetic field of a long straight wire, it is given by

[tex]B = \frac{\mu _{o}I }{2\pi R}[/tex]

Where B is the magnetic field

[tex]\mu _{o}[/tex] is the free space permeability constant ( [tex]\mu _{o}[/tex] = 4π × 10⁻⁷ N/A²)

[tex]I[/tex] is the current

and [tex]R[/tex] is the distance from the wire

Then, to calculate the magnetic field at the center of a circular current loop of radius R divided by the magnetic field at a distance R away from a very long straight wire carrying the same current value I, that will be

[tex]\frac{\mu _{o}I }{2R} \div \frac{\mu _{o}I }{2\pi R}[/tex]

= [tex]\frac{\mu _{o}I }{2R} \times \frac{2\pi R }{\mu _{o}I}[/tex]

= [tex]\pi[/tex]

(NOTE: [tex]\pi[/tex] = 3.14)

Hence, the magnetic field at the center of a circular current loop of radius R divided by the magnetic field at a distance R away from a very long straight wire carrying the same current value I is [tex]\pi[/tex] or 3.14.

Centripetal acceleration must involve a change in

Answers

Answer:

Centripetal acceleration must involve a change in a. an object's tangential speed.

Explanation:

Centripetal acceleration must involve a change in direction of motion of the object.

What is centripetal acceleration?

centripetal acceleration is the acceleration of a body traversing a circular path. Because velocity is a vector quantity (that is, it has both a magnitude, the speed, and a direction), when a body travels on a circular path, its direction constantly changes and thus its velocity changes, producing an acceleration. The acceleration is directed radially toward the center of the circle.

In your daily existence, you must have encountered numerous instances of centripetal acceleration. A centripetal acceleration occurs when you drive in a circle, and a centripetal acceleration also occurs when a satellite orbits the earth. Centripetal refers to being in the center.

Learn more about centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ2

Someone please makeup a hypothesis for me rq make it make sense!

Answers

If the slope is downward, and the marbles are going downward, then there will be little work to be done when moving the marbles. Hope this helps :)

1) A rigid tank contains 2 kg of 134a refrigerant at 800 kPa and 120°C. Determine tank volume and total internal energy.

Answers

Answer:

V = 0.07525 [m³]

U  = 655.74 [kJ]

Explanation:

To solve this problem we must use the superheated refrigerant table for refrigerant 134a. The attached image shows the specific volume and specific internal energy values for a pressure of 800 [kPa] and a temperature of 120 [°C].

m = mass =2 [kg]

the specific volume = v = 0.037625 [m³/kg]

The volume of the tank can be found using the following expression:

V = v*m

V = 0.037625*2 = 0.07525 [m³]

The Specific internal energy = u = 327.87 [kJ/kg]

U = u*m

U = 327.87*2 = 655.74 [kJ]

In what climates would you expect soil to form fastest? Why?

Answers

Answer:

Soils develop faster in warm, moist climates and slowest in cold or arid ones. Rainfall is one of the most important climate factors in soil formation.

Please mark me brainliest!

Hope this helped God bless :)

Soil formation occurs more swiftly in warm, humid areas than it does in cold or arid ones.One of the most crucial climatic variables for the formation of soil is rainfall. The breakdown of large soil particles into smaller ones is accelerated by creatures such as bacteria, plants, and animals.

What climates soil to form fastest?

The rate of chemical reactions is accelerated by rising temperature, which also accelerates soil formation. Faster plant and bacterial growth in warmer climates aids in the weathering of materials and the formation of soils.

The formation of soil is another indirect effect of climate on organisms. Weathering is accelerated by precipitation and warm temperatures, which increases the amount of soil development. Rainfall increases the amount of organic matter, lowers pH, accelerates the leaching of basic ions, moves mud, etc.

Therefore, In warm, wet regions, soil development happens more quickly than in cold or arid ones. One of the most crucial climatic variables for the formation of soil is rainfall.

Learn more about climate here:

https://brainly.com/question/29166575

#SPJ1

A 65.25 kg person holding a steel ball stands motionless on a frozen lake.
The person then throws the ball, which propels the person at 1.25 m/s to the
right and the ball 4.05 m/s to the left. If the initial momentum of the system is
zero, what is the mass of the steel ball?

Answers

Answer:

20.14 KG

Explanation:

apex keepy o heads up stay positive don't stress over something useless big future 4 all of yall!

The mass is 20.14 kg

Page
1
of 3
0
ZOOM
3. A cat is moving at 18 m/s when it accelerates at 4 m/s? for 2 seconds. What is his new
velocity?

Answers

Answer:

26 m/s

Explanation:

v = u + at

Given that,

u(initial speed) = 18 m/sa (acceleration) = 4m/s^2t ( time) = 2s

and v ( final velocity) = ?

v = 18 + ( 4 × 2)

v = 18 + 8

v = 26 m/s

Object has a mass of 35g and a density of 5g/cm3.
What is the volume? *

Answers

Answer:

The answer is 7.0 mL

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question

mass = 35 g

volume = 5 g/cm³

We have

[tex]volume = \frac{35}{5} \\ [/tex]

We have the final answer as

7.0 mL

Hope this helps you

Tell which is the answer
help please

Answers

Answer: a constant? im not sure that just sounds like itd be right.

Explanation:

Answer:

b

Explanation:

because he isn't moving

SOMEONE PLEASE PLEASE HELP QUICK PICTURE INCLUDED

Answers

Answer:

A

Explanation:

Switches are used to block electrical currents, thus needing to be made out of insulating material.

Other Questions
aerial and satellite photography have made possible the complete mapping of Antarctica true or false Hey Everybody! I need help! Anybody know what the module three segment one password is for civics? Im too scared to ask my teacher because I have a four assignments before I do the exams but each exam requires a password. If you know it please let me know. Which of these is not an advantage of wetlands?Group of answer choicesrecharge water tableshelp prevent floodingflow rapidlygood habitat for life A rectangle has side lengths of 2x - 1 and x + 1. If the rectangle's area is 90 square inches, what is its perimeter? my teacher told me to answer this it got complicated for me what is 542.070 rounded to the NEAREST tenth Line $1$ represents the graph of $3x + 4y = -14$. Line $2$ passes through the point $(-5,7)$, and is perpendicular to line $1$. If line $2$ represents the graph of $y=mx +b$, then find $m+b$. help :(If 4.7 moles of oxygen gas are allowed to react with 3.9 moles of iron according to the following equation:4 Fe + 3 O2 2 Fe2OHow many moles of Fe2O3 can be formed? people/East/faith/fate/the/eternal/have/in/0f/the Find the error with subject-verb agreement. Select the incorrect verb and type it correctly.MrEatonistryingtoconcentrateonhisyardworkbutaswarmofbeeskeepdistractinghim Managers and leaders perform many tasks as a result of their goals and objectives. Even though many tasks may be completed as a result of their responsibilities, each task may be categorized into one of four functions of management. Management is a process. This process is what allows managers and leaders to achieve organizational and personal goals. Included within this process are four functions of management. These four functions include planning, organizing, leading, and controlling. Each of these functions is an important aspect of the management process and must be implemented to achieve organizational goals.Click and drag each item into the correct spot within the chart. Each item is one of the four functions of management. Paul Santago Planning Organizing Matthew Chloe Kely Tomasz Leading Controlling Ava Michele Reset Randall describes his job this way."I visit different office buildings and service heating and cooling units that are not working properly."Which of the Construction industry careers is Randall most likely part of?O LandscapingO ConstructionO Maintenance/OperationsO Design/Pre-ConstructionHelp now please PQ is a straight line and RS is the perpendicular bisector of PQ. Form two linear equations based on the diagram above. One pound of apples is $2. You have no more than $13 to spend on apples What is the connection between a property of life and carbohydrates? What happened to all the trustee colony laws is 104.25 a rational or irrational number At Penny's Pie Shop, it costs $4 for 1/4 of a pie. What is the cost of a whole pie? Simplify your answer and write it as a proper fraction, mixed number, or whole number. QUESTION 1: In Exercises 58, use the method illustrated in Example 2 to determine moving averages by subtraction and addition. Determine the 6-day SMA for the ten consecutive trading day closing prices for SunEdison Inc. Listed below. $2.65, $2.63, $2.70, $2.63, $2.50, $2.65, $2.66, $2.56, $2.52, $2.37 * 5 points A common test for liver function involves sprinkling sulfur powder onto a sample of urine (mostly water with dissolved bodily waste). Sulfur powder sprinkled on a sample from an Individual with impaired liver function will sink because the urine contains a high level of bile salts, while the sulfur powder sprinkled on normal urine samples will float. Which of the following best explains why bile salts cause the sulfur powder to sink? A. Bile salts decrease the surface tension of the urine sample.B. Bile salts increase the water potential of the urine. . Bile salts increase the density of the urine sample. D. Bile salts decrease the strength of the covalent bonds within a water molecule.