Answer:
The north and south pole of a solenoid depends on two factors. One, the direction of the current flow and two, the direction of the winding (clockwise or counter-clockwise). ... If clockwise in relation to the positive wire then is the south pole, if anti-clockwise then is the north pole.
Explanation:
The north and south pole of a solenoid depends on two factors. One, the direction of the current flow and two, the direction of the winding (clockwise or counter-clockwise). ... If clockwise in relation to the positive wire then is the south pole, if anti-clockwise then is the north pole.
A copper wire of length L and cross-sectional area A has resistance R. A second copper wire at the same temperature has a length of 2L and a cross-sectional area of A. What is the resistance of the second copper wire?
A. 2R
B. 4R
C. R
D. 1/2 R
Answer: 4R
Explanation:R=pL/A
R second wire=p2L/1/2A
=4R
A pendulum Bob released from some initial height such that the speed of the bob at the bottom of the swing is 1.9m/s. What is the initial height of the bob?
Answer:
h = 18.4 cm
Explanation:
Given that,
The speed of the bob at the bottom of the swing is 1.9m/s.
We need to find the initial height of the bob. Let it is h.
We can find it using the conservation of energy i.e.
[tex]mgh=\dfrac{1}{2}mv^2[/tex]
Where
v is speed of the bob
So,
[tex]h=\dfrac{v^2}{2g}\\\\h=\dfrac{(1.9)^2}{2\times 9.8}\\\\h= 0.184\ m[/tex]
or
h = 18.4 cm
So, the initial height of the bob is 18.4 cm.
The initial height of bob will be "18.4 cm".
Speed and height:Speed would be the scalar quantity that describes "how quickly an attribute moves." This could sometimes be defined as this same rate whereby an object travels a given distance.
According to the question,
The speed of the bob = 1.9 m/s
Let,
The initial height be "h".
By using the conservation of energy, we get
→ mgh = [tex]\frac{1}{2}[/tex]mv²
or,
→ h = [tex]\frac{v^2}{2g}[/tex]
By substituting the values, we get
= [tex]\frac{(1.9)^2}{2\times 9.8}[/tex]
= 0.184 m or,
= 18.4 cm
Thus the above answer is correct.
Find out more information about speed here:
https://brainly.com/question/13665920
A 16 g ball at the end of a 1.4 m string is swung in a horizontal circle. It revolves once every 1.09 s. What is the magnitude of the string's tension?
Answer and I will give you brainiliest
Answer:
6.56
Explanation:
frequency = 1/1.09 = 0.92 Hz
f = 1/(2L) × √T/m
0.92 = 1/2(1.4) × (√T/√16)
0.92 = 0.36 × (√T)/4
multiply all through by 4
3.68 = 1.44 × √T
√T = 3.68/1.44 = 2.56
T = 2.56² = 6.56
The magnitude of the string's tension as it is swung in a horizontal circle is 0.744 Newton
Given the data in the question;
Mass of the ball;[tex]m = 16g = 0.016kg[/tex]String is swung in a horizontal circle, Radius; [tex]r = 1.4m[/tex]Period of revolution; [tex]T = 1.09s[/tex]Magnitude of the string's tension; [tex]F_T = ?[/tex]First, we need to get magnitude of the centripetal acceleration:
[tex]a_c = \frac{4\pi ^2r}{T^2}[/tex]
We substitute in our given values
[tex]a_c = \frac{4\pi ^2\ *\ 1.4m}{(1.09s)^2} \\\\a_c = 46.519 m/s^2[/tex]
Now, from Newton's Second Law of Motion:
[tex]F = m\ * \ a[/tex]
Where F is the force, m is the mass of the object and a is the acceleration
We substitute into the equation to get the magnitude of the string's tension.
[tex]F = 0.016kg \ *\ 46.519m/s^2[/tex]
[tex]F = 0.744 kg.m/s^2\\\\F = 0.744 N[/tex]
Therefore, the magnitude of the string's tension as it is swung in a horizontal circle is 0.744 Newton
Learn more; https://brainly.com/question/14039108
I need help with this, I can't figure it out.
Here is the link:
https://platform.breakoutedu.com/game/play/fun-in-the-sun-140559-XMWCQF1LPL
Answer:
Star, Triangle, Circle, Rhombus, Square.Left, Down, Right, Down, Up.2,3,2,4.L,O,O,K,I,N,G,F,L,Y.Explanation: You're welcome ✓
A positively charged particle of mass 7.2 x 10-8 kg is traveling due east with a speed of 88 m/s and enters a 0.6-T uniform magnetic field. The particle moves through one-quarter of a circle in a time of 2.2 x 10-3 s, at which time it leaves the field heading due south. All during the motion the particle moves perpendicular to the magnetic field. Determine the magnitude of its charge in mC. (1 mC
Answer:
q = 8.57 10⁻⁵ mC
Explanation:
For this exercise let's use Newton's second law
F = ma
where force is magnetic force
F = q v x B
the bold are vectors, if we write the module of this expression we have
F = qv B sin θ
as the particle moves perpendicular to the field, the angle is θ= 90º
F = q vB
the acceleration of the particle is centripetal
a = v² / r
we substitute
qvB = m v² / r
qBr = m v
q =[tex]\frac{m\ v}{B\ r}[/tex]
The exercise indicates the time it takes in the route that is carried out with constant speed, therefore we can use
v = d / t
the distance is ¼ of the circle,
d = [tex]\frac{1}{4} \ 2\pi r[/tex]
d =[tex]\frac{\pi }{2r}[/tex]
we substitute
v = [tex]\frac{\pi r}{2t}[/tex]
r = [tex]\frac{2 \ t \ v}{\pi }[/tex]
let's calculate
r =[tex]\frac{2 \ 2.2 \ 10^{-3} \ 88}{\pi }[/tex] 2 2.2 10-3 88 /πpi
r = 123.25 m
let's substitute the values
q = [tex]\frac{ 7.2 \ 10^{-8} \ 88}{ 0.6 \ 123.25}[/tex]7.2 10-8 88 / 0.6 123.25
q = 8.57 10⁻⁸ C
Let's reduce to mC
q = 8.57 10⁻⁸ C (10³ mC / 1C)
q = 8.57 10⁻⁵ mC
Approximately where is it currently high tide on Earth? Group of answer choices wherever it is currently noon anywhere that ocean water laps upon the shore on the portion of Earth facing directly toward the Moon and on the portion of Earth facing directly away from the Moon only on the portion of the Earth facing directly toward the Moon
Answer:
Option D, only on the portion of the Earth facing directly toward the Moon
Explanation:
Tides are caused by the gravitational pull of moon. The part of earth that faces the moon experiences the highest gravitational force and hence the high tides will occur in this regions only. The regions that do not faces the moon experiences low tides. It is the gravity of moon that attracts the ocean water towards itself.
Hence, Option D is correct
(PLEASE) You go sledding down a hill and are traveling toward the east. At 0s, your velocity is 0m/s. At 5s, your velocity is 30m/s. Calculate your acceleration.
Answer:
your acceleration is 6 m/s²
Explanation:
Given;
initial velocity, u = 0
initial time, t₀ = 0
final velocity, v = 30 m/s
final time, t = 5 s
The acceleration of is calculated as follows;
[tex]a = \frac{v-u}{t_1-t_0} \\\\a = \frac{30-0}{5-0} \\\\a =\frac{30}{5} \\\\a = 6 \ m/s^2[/tex]
Therefore, your acceleration is 6 m/s²
The amount of energy a substance has depends on the state of matter
the substance is in at the time.
True
or False
The angle between A = (-25 m)i +(45 m), and the positive e axis is
Answer:
[tex]\theta=119.06^{\circ}[/tex]
Explanation:
The vector is :
A = -25i+45j
We need to find the angle between angle A and the positive x-axis. It can be calculated as follows :
[tex]\theta=180^{\circ}-\tan^{-1} (\dfrac{45}{25})\\\\=180-60.94\\\\=119.06^{\circ}[/tex]
So, the angle of vector A with the +x axis is [tex]119.06^{\circ}[/tex].
It is winter. You are very cold. Your body systems cooperate and respond to the cold in three ways in an effort to keep you warm. Choose the answer that is NOT correct.
Your nervous system slows down and the impulses that move your muscles also slows, helping to retain heat.
The body will try to generate heat itself by allowing muscles and organs to shake within the body: this is known as shivering.
Blood flow is diverted from muscle tissue to fat. The rapid decomposition fat (adipose) tissue generates heat energy that helps to raise the body's temperature.
Cold causes blood vessels to constrict and blood flow resistance to increase. Reducing blood flow to the skin and the extremities reduces heat transferred to the environment.
Answer:
The third option
Explanation:
A and B are true because this can be noticed by just any human. So then you are left with C and D. With these two, D makes more sense. Since when someone gets cold, their blood flow is reduced starting in areas like your fingers, hands, toes and feet. These areas get the coldest since they are the smallest and furthest away from the rest of your body. Also since these areas touch surfaces more than other areas, they will have less heat to transfer.
Blood flow is diverted from muscle tissue to fat. The rapid decomposition fat (adipose) tissue generates heat energy that helps to raise the body's temperature. - This answer is NOT correct.
What is nervous system?nervous system is a network of organized cells with the specific purpose of carrying electrochemical inputs from sensory receptors to the location where a response takes place.
Every living thing has the capacity to recognize changes in both its own surroundings and outside it. Changes in the internal environment include those in the position of the head and limbs as well as those in the internal organs, whereas changes in the exterior environment include those in light, temperature, sound, motion, and odor
.
Two different kinds of systems, physiologic and behavioral, control body temperature.
Learn more about nervous system here:
https://brainly.com/question/29355295
#SPJ2
A person in car slides to the right when going through a very sharp left turn on the highway. Is that law of inertia or law of acceleration?
Answer:
Inertia :)
Explanation:
why don't we draw lewis dot diagrams for nobel gases
Could a sea breeze occur at night? Explain why or why not.
ELE Review questions
POSSIBLE POINTS: 3
Match the energy transformation sequence with the device it describes:
A hair dryer plugged into the wall
a
A hand crank generator emergency radio
A battery operated fan
11 CE to ELE
+ ELE to KE
:: KE to ELE
h
1
2
A Review
Answer:
1. ELE to KE = Electrical energy conversion to kinetic energy.
2. KE to ELE = kinetic energy conversion to electrical energy.
3. CE to ELE = chemical energy conversion to electrical energy.
Explanation:
The Law of Conservation of Energy states that energy cannot be destroyed but can only be transformed or converted from one form to another.
Some examples of energy are chemical energy, electrical energy, kinetic energy, sound energy, potential energy, light energy, etc.
The transformation of energy from one form to another are described below;
1. A hair dryer plugged into the wall: it involves the conversion of electrical energy to kinetic energy. The energy type present in the wall socket is electrical energy which powers the hair dryer to have kinetic energy i.e the energy possessed due to motion of hair dryer.
2. A hand crank generator emergency radio: it illustrates the conversion of kinetic energy to electrical energy. The hand crank generator possess kinetic energy as it is being wounded before it is then converted into electrical energy which powers the radio.
3. A battery operated fan: it illustrates the conversion of chemical energy to electrical energy. The cells present in battery possess chemical energy that is being converted into electrical energy to power the fan.
How much work is done against gravity when lifting a 2-kg sack of groceries a distance of 2.5 meters?
6th grade science I mark as brainliest (can someone answer my other question like this?)
Answer:A: July
B: July and august
C:true
Explanation:
image.
A concave lens always produces a(n)
A. inverted
o
B. real
C. virtual
D. magnified
Answer:
Explanation:
Its Virtual, how would you describe the image formed by a convex mirrior? virtual upright, smaller
Students in an introductory physics lab are performing an experiment with a parallel-plate capacitor made of two circular aluminum plates, each 20 cm in diameter, separated by 1.0 cm. How much charge can be added to each of the plates before a spark jumps between the two plates? For such flat electrodes, the field that causes a spark is at the high end of the range pre- sented in the chapter; assume a value of 3 * 106 N/C.
Answer:
Q = 0.83 μC
Explanation:
Assuming that plates are much larger than the distance between them, we can think the electric field as constant and perpendicular to the outer surface of the plates.Applying Gauss' law to a rectangular surface half inside one of the plates and half outside it, since E and A are parallel each other, and E is zero on the other three faces, we can find the following expression for the electric field created by the charge on the plate:[tex]E = \frac{Q*A}{\epsilon_{0} } (1)[/tex]
Solving for Q, replacing E by the maximum electric field that doesn't cause the dielectric strength to break (3*10⁶ N/C), we get:[tex]Q_{max} = E_{max} * \pi *\frac{d^{2}}{4} *\epsilon_{0} = 3e6N/C*\pi *\frac{(0.2m)^{2} }{4} * 8.85e-12C2/Nm2 = 0.83\mu C (2)[/tex]
when the body said to be in equilibrium
Answer:
Oh! I just learned abt this
Explanation:
the body is said to be in equilibrium if it is resting or moving with uniform velocity.
Answer: The body is said to be in balance if it is at rest or moving at a uniform speed. In other words, if the body's linear and angular acceleration is zero, the body is said to be in balance. 1
Which factors affect the gravitational force between two objects?
-
distance and velocity
O mass and distance
O mass and weight
acceleration and weight
TELE
Answer:
mass and distance
Explanation:
mass, and distance. The force of gravity depends directly upon the masses of the two objects, and inversely on the square of the distance between them.
James makes a treasure map to locate a secret item on McEachern Campus. He uses the
following displacement vectors to locate the treasure
A student wants to simplify this information
5 m East
7 m North
5 m South
7 m East
3 m South
2 m West
A. Determine the Displacement Vector Components. (x componenty component)
Show all work. 2 pts
B. Use the Pythagorean Theorem to calculate the resultant vector. Show all work. 2 pts
Answer format:
a. work & answer...
b. work and answer...
(4 Points)
Answer:
south
Explanation:
Suppose you have a cylinder filled with diatomic oxygen (O2) and it is running low. The cylinder is shown above, is made of steel, and has a fixed volume of 10 L.
You are asked to determine the number of O2 molecules that are left in the cylinder, so you take a measurement of the temperature to be 20℃. You then note that the pressure gauge reads 100 psi, which you checked at sea level in Bellingham, where the local pressure is one atm (14.7 psi). Calculate the number of O2 molecules left in the container.
Answer:
The number of O₂ molecules that are left in the cylinder is 1.70x10²⁴.
Explanation:
The number of oxygen molecules can be found using the Ideal Gas law:
[tex] PV = nRT [/tex]
Where:
P: is the pressure = 100 psi
V: is the volume = 10 L
n: is the number of moles =?
T: is the temperature = 20 °C = 293 K
R: is the gas constant = 0.082 L*atm/(K*mol)
Hence, the number of moles is:
[tex]n = \frac{PV}{RT} = \frac{100 psi*\frac{1 atm}{14.7 psi}*10 L}{0.082 L*atm/(K*mol)*293 K} = 2.83 moles[/tex]
Now, the number of molecules can be found with Avogadro's number:
[tex]n_{m} = \frac{6.022 \cdot 10^{23}\: molecules}{1\: mol}*2.83 moles = 1.70 \cdot 10^{24} \: molecules[/tex]
Therefore, the number of O₂ molecules that are left in the cylinder is 1.70x10²⁴.
I hope it helps you!
An unfortunate astronaut loses his grip during a spacewalk and finds himself floating away from the space station, carrying only a rope and a bag of tools. First he tries to throw a rope to his fellow astronaut, but the rope is too short. In a last ditch effort, the astronaut throws his bag of tools in the direction of his motion, away from the space station. The astronaut has a mass of ma=102 kgma=102 kg and the bag of tools has a mass of mb=10.0 kg.mb=10.0 kg. If the astronaut is moving away from the space station at vi=2.10 m/svi=2.10 m/s initially, what is the minimum final speed vb,fvb,f of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever?
Answer:
The answer is "[tex]2.352 \ \frac{m}{s}[/tex]"
Explanation:
[tex]\to mass(m_1)=102 \ kg\\\\\to mass(m_2)=10 \ kg \\\\\to v=2.10\ \frac{m}{s}\\\\[/tex]
momentum before:
[tex]\to p=(m_1+m_2)v[/tex]
[tex]=(102+10)2.10\\\\=(102\times 2.10 +10 \times 2.10)\\\\=214.2+21\\\\=235.2[/tex]
momentum After:
[tex]\to p=(m_1+m_2)v[/tex]
[tex]=(102\times 0 +10 \times v)\\\\ =(0 +10v)\\\\=10v\\[/tex]
Calculating the conservation of momentum:
[tex]\to \text{momentum before = momentum After}[/tex]
[tex]\to 235.2=10v\\\\\to v= \frac{235.2}{10}\\\\ \to v=2.352 \ \frac{m}{s}[/tex]
a virtual image is formed by
a) simple microscope b) telescope c) the ordinary camera d) a slide projector in a cinema hall
Answer: ordinary camera
Explanation:
Answer:
C.
Explanation:
proof that the kinetic energy of a moving body is half mv square
Answer:
1
Explanation:
whk is thefounder of pakistan?
Answer:
Muhammad Ali Jinnah (Urdu: محمد علی جناح; born Mahomedali Jinnahbhai; 25 December 1876 – 11 September 1948) was a barrister, politician and the founder of Pakistan.
A person is standing on a level floor. His head, upper torso, arms, and hands together weigh 458 N and have a center of gravity that is 1.34 m above the floor. His upper legs weigh 120 N and have a center of gravity that is 0.766 m above the floor. Finally, his lower legs and feet together weigh 89.8 N and have a center of gravity that is 0.204 m above the floor. Relative to the floor, find the location of the center of gravity for the entire body.
Answer:
the location of the center of gravity for the entire body is 1.08 m
Explanation:
Given the data in the question;
w1 = 458 N, y1 = 1.34 m
w2 = 120 N, y2 = 0.766 m
w3 = 89.8 N, y2 = 0.204 m
The location arrangement of the body part is vertical, locate the overall centre of gravity by simply replacing the horizontal position x by the vertical position y as measured relative to the floor.
so,
[tex]Y_{centre of gravity}[/tex] = (w1y1 + w2y2 + w3y3 ) / ( w1 + w2 + w3 )
so we substitute in our values
[tex]Y_{centre of gravity}[/tex] = (458×1.34 + 120×0.766 + 89.8×0.204 ) / ( 458 + 120 + 89.8 )
[tex]Y_{centre of gravity}[/tex] = 723.9592 / 667.8
[tex]Y_{centre of gravity}[/tex] = 1.08 m
Therefore, the location of the center of gravity for the entire body is 1.08 m
Which list below contains only ionic compounds?
A. CaCl2, H2O, LIF
B. CO2, K20, P4010
C. LiF, CaCl2, Mgo
D. NO2, Mgo, CuCl2
Answer:
C. LiF, CaCl2, MgO
Explanation:
Ionic compound: It is that compound which consist of negative and position ions and held together by electrostatic force of attraction.
The ionic compound is neutral.
The ionic compound formed between metal and non-metal.
Covalent compound: It is that compound in which sharing of electrons between two atoms occur.
A.[tex]CaCl_2,H_2O,LiF[/tex]
H2O is not ionic compound. It is polar covalent.
Therefore, it does not contain only ionic compounds.
B.CO2,K2O,P4O10
CO2 and P4O10 are not ionic .It is covalent.
Therefore, it does not contain only ionic compounds.
C. LiF,CaCl2 ,MgO
All compounds are ionic because in given compounds one ion is negative and one is metal (positive).
Therefore, it contains only ionic compounds.
D.NO2,MgO,CuCl2
NO2 is not ionic.
Therefore, it does not contain only ionic compounds.
Option C is correct.
You are hiking pine mountain and have finally reached the top. You are peering over the edge and accidentally drop your phone while taking pictures. Your phone falls and hit the
ground 13 seconds later. How tall is the mountain?
Answer:
The cliff is 12.71m tall.
Explanation:
Why?
Before solving the problem, we must remember that the phone was dropped, it means that there is no initial velocity, also, the acceleration acting on the phone is the acceleration due to gravity.
So, to find how tall is the cliff, we can use the following equations:
\begin{gathered}y=y_o+v_o*t-\frac{1}{2}g*t^{2}\\\\v_f=v_o+g*t\end{gathered}y=yo+vo∗t−21g∗t2vf=vo+g∗t
\begin{gathered}t=\frac{v_f}{g} \\\\t=\frac{-15.75\frac{m}{s}}{-9.81\frac{m}{s^{2}}}=1.61s\end{gathered}t=gvft=−9.81s2m−15.75sm=1.61s
Now that we know the time, we can calculate how tall is the cliff:
\begin{gathered}y=y_o+v_o*t+\frac{1}{2}g*t^{2}\\\\y=0+0*1.61s-\frac{1}{2}*(-9.81\frac{m}{s^{2}})*(1.61s)^{2}\\\\y=12.71m\end{gathered}y=yo+vo∗t+21g∗t2y=0+0∗1.61s−21∗(−9.81s2m)∗(1.61s)2y=12.71m
A force of 350 N is applied to an object that accelerated at a rate of 5 m/sec2. What is the mass of the object
Answer:
7/ m5sec per minute ckvhxrsuvj