The map below shows major ocean currents in the North Atlantic and North Pacific Oceans. In general, currents flowing toward the
Equator bring cooler waters to some regions, while currents flowing away from the Equator bring warmer waters to other regions.
North
British
Isles
Askan
North Atlantic
Azor
U.S.A
California
Gulf Stream
Loop
n
Canbean
North Equatorial
North Equatorial CC
North Fuatorial
Equator
South Equatorial
Not
South Equatorial
Image courtesy of NOAA
Judging from the map, which region probably has cooler summers than it would without the effect of a nearby ocean current?
A the Central U.S.
B. the British Isles
C. the U.S. East Coast
D. the US West Coast

Answer:

Explanation:

Displacement is minimum distance between initial and final point .

Distance is total length of path covered in a journey .

a )

Tyler covered a longer distance in the journey because total length of path covered by him is longer due to curved path .

b )

Both have same displacement , because minimum distance between initial and final point in both the case is same .

c )

average speed = distance / time

as time is same for both the case ,

average speed ∝ distance

As distance covered by Tyler is more , his average  speed is more .

d )

average velocity = displacement / time

As both displacement and time are same in both the case , average velocity in both the case is same .

e )

They start at the same time and place at the bottom of the mountain and finish at the same time , both have tie and nobody won the race , in spite of speed of Tyler being greater  .

Answer:

Im 99.99999% sure its c

Explanation:

i cant see the pictures too well

Answer:

Option 2 both take millions of years to form

Explanation:

Both  coal and ores take millions of years to form.

Ore is a naturally occurring rock or silt that has precious minerals in it that may be extracted, processed, and sold for a profit. These minerals are usually metals. Mining is the process of removing ore from the soil. The valuable metals or minerals are then removed by treating or refining the ore, frequently through smelting.

The concentration of the desired ingredient in an ore is referred to as its grade. To decide if a rock has a high enough grade to be worth mining and is therefore regarded as an ore, the value of the metals or minerals it contains must be evaluated against the expense of extraction.

Typically, oxides, sulphides, silicates, or native metals like copper or gold are the minerals of interest. To separate the valuable components from the waste rock, ore must be treated. Numerous geological processes collectively known as ore genesis are responsible for the formation of ore deposits.

Learn more about ore here:

https://brainly.com/question/4712893

#SPJ2

Answer:

19.5 m/s

87.8 m

Explanation:

The acceleration of block one is:

∑F = ma

-m₁gμ = m₁a

a = -gμ

a = -(9.8 m/s²) (0.22)

a = -2.16 m/s²

The velocity of block one just before the collision is:

v² = v₀² + 2aΔx

v² = (8.25 m/s)² + 2 (-2.16 m/s²) (2.3 m)

v = 7.63 m/s

Momentum is conserved, so the velocity of block two just after the collision is:

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

m₁u₁ = m₂v₂

(18.5 kg) (7.63 m/s) = (7.25 kg) v

v = 19.5 m/s

The acceleration of block two is also -2.16 m/s², so the distance is:

v² = v₀² + 2aΔx

(0 m/s)² = (19.5 m/s)² + 2 (-2.16 m/s²) Δx

Δx = 87.8 m

Explanation:

By using conservation of linear momentum and also by equating work done to kinetic energy,  [tex]V_{2}[/tex]  = 15.36 m/s and [tex]d_{2}[/tex] = 4.32 meters

Parameters given are :

[tex]m_{1}[/tex] = 19.5 kg

friction, μk = 0.35

distance d = 2.6 m

mass [tex]m_{2}[/tex] = 8.25 kg.

initial velocity of [tex]U_{1}[/tex] = 6.5 m/s.

a.) Since we assumed that the block one stops after it collides with block two, the final velocity for block one will be zero. That is, [tex]V_{1}[/tex] = 0 so its final momentum = 0

Let us also assume that block two was initially at rest. Therefore, it initial velocity and its momentum will be equal to zero.

The formula to use will be :

[tex]m_{1}U_{1} = m_{2}V_{2}[/tex]

Substitute all the parameters into the formula above

19.5 x 6.5 = 8.25[tex]V_{2}[/tex]

Make [tex]V_{2}[/tex] the subject of formula

[tex]V_{2}[/tex] = 126.75/8.25

[tex]V_{2}[/tex] = 15.36 m/s

b.) Let us first calculate the work done in by block one.

The K.E = [tex]1/2mU^{2}[/tex]

substitute its mass and velocity into the formula

K.E = 1/2 x 19.5 x [tex]6.5^{2}[/tex]

K.E = 411.94 Joule

The work done = Kinetic energy

But the resultant Force F = force f - friction

where Frictional force = 0.35 x 19.5 x 9.8

Frictional force = 66.89N

Work done will be the product of resultant Force F and the distance travelled

(F - 66.89) x 2.6 = 411.94

F - 66.89 = 411.94/2.6

F - 66.89 = 158.44

F = 225.3 N

The second block will experience the same force which is equal to 225.3N

Find the kinetic energy of the second block.

K.E =  [tex]1/2mV^{2}[/tex]

K.E = 0.5 x 8.25 x 15.36^2

K.E = 973.2

Using The work done = Kinetic energy

225.3[tex]d_{2}[/tex] = 973.2

[tex]d_{2}[/tex] = 973.2/225.3

[tex]d_{2}[/tex] = 4.32 meters

Learn more here : https://brainly.com/question/20658056

Answer:

Workdone = -2730 J

Explanation:

Formula for workdone is;

W = Force × Displacement

Now, according to Newton's 3rd law of motion, to every action, there is an equal and opposite reaction.

In the question given, we are told that a force gauge placed halfway down the rope reads out a constant 2100 Newtons while Magnus pulls the bus. This means that the force exerted by the rope on Magnus acts in an opposite direction to that which Magnus does to the rope.

Therefore, the force will be in the negative direction.

So;

Workdone = -2100 N × 1.3 m

Workdone = -2730 J

Answer:

Clara has speed of 80m/min

Explanation:

Clara was jogging at 600 m in 5 minutes. She stopped suddenly which reduced her velocity and then she waited for 10 minutes so that her friends comes near her. She stopped to catch her friend. During this 10 minutes the velocity of Clara is zero. She started to walk again at a slower speed of 80m/min.

Answer:

2 m

Explanation:

speed=frequency×wavelength

wavelength=speed/frequency

wavelength=1000/500

=2 m

Answer:

All answer are explained below in the explanation section.

Explanation:

1. The pressure varies proportionally with the change in temperature. It can also be observed in our daily lives.

As for example, a pressure cooker uses the same principal to cook food faster. With the increasing temperature, the pressure inside the cooker increases.

Thus after a while, the excess pressure inside is released through the top nozzle. The data shown below supports that pressure and temperature varies linearly.

2. Hand drawn plot is attached in the attachment please refer to the attachment for the hand drawn plot.

Tire pressure at temperature 18.6 degree C is ~ 35 psi.

Temperature at air pressure of 37 psi is ~26.1 degree C

3. a.) Necessary values are included in the stat box. It is attached in the attachment please refer to the attachment.

3. b) The equation becomes: Pressure = 0.176 x temperature + 32.32

3. c) It is already done in part a of this question.

4. The value of the slope estimated from the linear fit is 0.176 +/- 0.094.

5. % Error = [tex]\frac{Actual - Experiment}{Actual} x 100[/tex]

Plugging in the values, we get:

Actual = 0.145, Experimental = 0.176. Thus, percentage error is given by:

% Error = 21.33%

6. a.) Visual estimation of tire pressure at t = 18.6 degree C is ~ 35 psi

6.  b.) Estimation of pressure from the best fit line is given by 35.6 psi, which is consistent with the eye estimation value.

6. c.) The eye estimation and the estimation from the line fit are quite comparable. The discrepancy of +/-0.5 psi is within the percentage error calculated in 5.

7.  a.) Visual estimation of temperature of the air for a tire-pressure of 37 psi is ~ 26 degree C.

7.  b.) Estimation of temperature from best fit value of line is = 26.64 degree C

7 c) The values from eye estimation and evaluated from the fit are quite consistent within a random fluctuation of +/- 0.64 degree C.

Answer:

a. of liquid at the time bubbles first emerge slowly from the liquid.

Explanation:

Boiling point of liquid happens due to heat energy. This is an exothermic reaction as heat is released in to the environment. The initial boiling vapors slowly move away from the liquid and as the temperature increases the vapors start moving quickly.

Answer:

I think it is transpiration

Answer:

transpiration is the right answer

Answer:

0.339 kgm²

Explanation:

We know the period of this pendulum, T = 2π√(I/mgh) where I = moment of inertia of the object about the pivot axis, m = mass of object = 2.15 kg, g = acceleration due to gravity = 9.8 m/s² and h = distance of center of mass of object from pivot point = 0.163 m.

Since T = 2π√(I/mgh), making I subject of the formula, we have

I = mghT²/4π²

Now since it takes 241 s to complete 113 cycles, then it takes 241 s/113 cycles to complete one cycle.

So, T = 241 s/113 = 2.133 s

So, Substituting the values of the variables into I, we have

I = mghT²/4π²

I = 2.15 kg × 9.8 m/s² × 0.163 m × (2.133 s)²/4π²

I = 15.63/4π² kgm²

I = 0.396 kgm²

Now from the parallel axis theorem, I = I' + mh² where I' = moment of inertia of object with respect to its center of mass about an axis parallel to the pivot axis

I' = I - mh²

I' = 0.396 kgm² - 2.15 kg × (0.163 m)²

I' = 0.396 kgm² - 0.057 kgm²

I' = 0.339 kgm²

Answer:GAS

Explanation:

AnswerHM???

Explanation:

I dONT KNOW

Answer:

friction help to slow motion in other word it oppose motion, but in a frictionless environment object would move with difficult stopping point.

Answer:the speed of the clay immediately before impact =72.58m/s

Explanation:

Given that  

mass of the stick clay, M₁= 14.0 g = 0.014 kg

mass of the block ,M₂= 90 g = 0.09 kg

Therefore the total mass= (M₁+M₂) = 104g = 0.104 kg

Also, distance, s = 7.50 m

coefficient of friction μ= 0.650

Acceleration due to gravity ,g = 9.8 m/s²

Using the Work- Energy theorem,

change in kinetic energy =  work done

final kinetic energy(K₂) - initial  kinetic energy(K₁) =   force, F x coefficient of friction, μ x distance,s

The final kinetic energy is zero  because after the impact,  the block with the clay comes to a stop after 7.50m

kinetic energy =Work done

0.5 x m x v²=coefficient of friction,  μ x force(F)  x  distance,s(Since force = m g )

0.5 x m x v²= μ x m x g x s

0.5 x 0.104 x v² = 0.650 x 0.104x 9.8 x 7.5

v²= 0.650 x 0.104x 9.8 x 7.5 / 0.5 x 0.104

v²==95.55

V = 9.77 m/s

Using the  conservation of momentum formulae where

M₁ V₁ + M₂ V₂ = (M₁ + M₂ ) V

Since V₂  which is the velocity of block  is zero as the  block is initially at rest, We now have that

M₁ V₁ = (M₁ + M₂ ) V

0.014 kg x V₁ = 0.104 x 9.77

V₁=0.104 x 9.77 / 0.014

V=72.58m/s

Answer:

The correct answer is option D.

Explanation:

It is stated in the question that constriction of the vocal tract at a place where the standing wave of a formant exhibits minimum-amplitude pressure oscillations generally causes the formant to drop in frequency so to increase formant frequency, the vocal should expand where the standing wave of a formant exhibits minimum-amplitude pressure oscillations. The answer is D.

I hope this helps.

Answer:

The number of electrons that surround the nucleus will determine whether or not it is electrically charged or electrically neutral

Explanation:

Answer:

(a). Check attachment.

(b). 280.305 J.

(c). 31.81 kpa; 38.26K.

(d). 24.05K.

(e). 24.05k; 40kpa.

(f). -138.6J.

Explanation:

(a). Kindly check the attached picture for the diagram showing the four process.

1 - 2 = adiabatic expansion process.

2 - 3 = Isochoric process.

3 - 4 = isothermal process.

4 - 1 = isochoric process.

(b). Recall that the process from 1 to is an adiabatic expansion process.

NB: b = 5/3 for a monoatomic gas.

Then, the workdone = (1/ 1 - 1.66) [ (p1 × v1^b)/ v2^b × v2 - (p1 × v1)].

= ( 1/ 1 - 5/3) [ (101 × 5^5/3) × 10^1 -5/3] - 101 × 5.

Thus, the workdone = 280.305 J.

(c). P2 = P1 × V1^b/ V2^b = 101 × 5^5/3/ 10^5/3 = 31.81 kpa.

T2 = P2 × V2/ R × 1 = 31.81 × 10/ 8.324 = 38.36k.

(d). The process 2 - 3 is an Isochoric process, then;

T3 = T2/P2 × P3 = 38.26/ 31.82 × 20 = 24.05K.

(e). The process 3 - 4 Is an isothermal process. Then, the temperature at 4 will be the same temperature at 3. Tus, we have the temperature; point 3 = point 4 = 24.05k.

The pressure can be determine as below;

P4 = P3 × V3/ V4 = 20 × 10/ 5 = 200/ 5 = 40 kpa.

(f) workdone = xRT ln( v4/v3) = 1 × 8.314 × 24.05 × ln (5/10) = - 138.6 J

Answer:

D

Explanation:

If you need an explanation feel free to ask.

Answer:

a) electric field at point P must be zero

b) harged must be positive

c) force ais in the direction of the electric field

d)  force is in the opposite direction to the electric field

e)  force is in the opposite direction to the field

Explanation:

After reading your exercise, it is unfortunate that the diagram did not come out, but we are going to answer the questions in general.

a) force on a charge (+) is zero

this implies that the electric field at point P must be zero

        F = q E

b) the magnitude of the charge on the left is on the right

this indicates that the charged must be positive since the lines must exit the charge

c) force on load directed towards (direction not indicated)

since the charge is positive the force at point L is in the direction of the electric field at this point

d) force on test load (-) does not indicate direction

The force on a negative charge is in the opposite direction to the electric field at point J

e) Force on a test load (-) at point N

the force is in the opposite direction to the field at point N

Explanation:

Answer:

4va

12va

2jk

1jk

2jk

Answer: it is thin near the center and thick at the edges

Explanation: took the test on Plato :)

Answer:

0.033 seconds

Explanation:

Period = 1/30 = 0.033 seconds

Answer:

The answer is 0.03 s

Explanation:

A.P.E.X.

Answer:

[tex]\boxed {\boxed {\sf 3.75 \ seconds }}[/tex]

Explanation:

Average acceleration is found by dividing the change in acceleration by the time.

[tex]a=\frac{ v_f-v_i}{t}[/tex]

The shuttle bus has an acceleration of -2.4 meters per square second. It slows from 9.0 meters per second to rest, or 0 meters per second. Therefore:

[tex]a= -2.4 \ m/s^2 \\v_f= 0 \ m/s \\v_i= 9 \ m/s[/tex]

Substitute the values into the formula.

[tex]-2.4 \ m/s^2=\frac{0 \ m/s - 9 \ m/s}{t }[/tex]

Solve the numerator.

[tex]-2.4 \ m/s^2 = \frac{-9 \ m/s}{t}[/tex]

We want to solve for t, the time. We have to isolate the variable. Let's cross multiply.

[tex]\frac{-2.4 \ m/s^2}{1} = \frac{-9 \ m/s}{t}[/tex]

[tex]-9 \ m/s *1= -2.4 \ m/s^2 *t[/tex]

[tex]-9 \ m/s=-2.4 m/s^2*t[/tex]

t is being multiplied by -2.4. The inverse of multiplication is division, so divide both sides by -2.4

[tex]\frac{-9 \ m/s }{-2.4 \ m/s^2} =\frac{ -2.4 \ m/s^2*t}{-2.4 \ m/s^2}[/tex]

[tex]\frac{-9 \ m/s }{-2.4 \ m/s^2} =t[/tex]

[tex]3.75 \ s=t[/tex]

It takes 3.75 seconds.

Answer:

a) the body  is changing direction,

b)the body must go to the left and the acceleration to the right

c) the movement has not started.

d) all points of the motion

Explanation:

In this exercise you are asked to find in which position you have the following characteristics of the movement

a) The velocity is zero and the acceleration is negative

This is when the body reaches the end of the travel and turns around, in this case the speed is zero and the acceleration has the opposite direction to the movement.

In this case the body moves to the right and the acceleration is to the left, therefore the speed decreases

b) The velocity is zero, but the acceleration is positive

This occurs at the points where the speed is changing direction, specifically for this case the body must go to the left and the acceleration to the right

c) Both are zero

This only occurs where the body is stopped and the movement has not started.

d) both the velocity and the relation are nonzero.

This is at all points of the motion since the velocity is constantly changing as long as there is an acceleration

Answer:

1. Protons.

2. Electrons.

3. Neutrons.

4. Molecules.

Explanation:

1. Protons: subatomic particles with a positive charge. They are bound together in the nucleus of an atom due to strong nuclear forces.

2. Electrons: subatomic particles with a negative charge. Electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.

3. Neutrons: subatomic particles with no charge. The negative charge of the electrons cancels the positive charge of the protons.

4. Molecules: they are made of atoms.

Generally, molecules attach on the inside of a mineral to give it shape. Therefore, the molecule of a mineral is a crystal three-dimensional regular structure (arrangement) of chemical particles that are bonded together and determines its shape.

Due to the fact that these molecules are structurally arranged or ordered and are repeated by different symmetrical and translational operations they determine the shape of minerals.

Answer:

-0.54m/s²

Explanation:

According to Newton's second law of motion

F = ma

Force = mass * acceleration

Given

Mass m = 4490kg

Take the sum of forces

Sum of force along the east = 890+1210 = 2100N

Sum of forces along the west = -4520N

Net force = -4520+2100

Net force = -2420N

Acceleration = Net force/Mass

Acceleration = -2420/4490

Acceleration = -0.54m/s²

Hence the boat acceleration is -0.54m/s²