The following information applies to the questions displayed below Over a four-year period, Jackie Corporation reported the following series of gross profits 2018 2019 2020 2021 $60,000 $66,000 $74,000 $90,000 Cost of goods sold32,000 46,00028,000 48,000 $28,000 $20,000 $46,000 $42,000 Net sales Cross profit In 2021, the company performed a comprehensive review of its inventory accounting procedures. Based on this review company records reveal that ending inventory was understated by $11,000 in 2019. Inventory in all other years is correct. Problem 6-10A Part 1
Required:
1. Calculate the gross profit ratio for each of the four years based on amounts originally reported. (Round your answers to the nearest whole percent.) Gross Profit Ratio 2018 2019 2020 2021 The following information applies to the questions displayed below Over a four-year period, Jackie Corporation reported the following series of gross profits 2021 Net sales Cost of goods sold Gross profit $60,000 $66,000 $74,000 $90,000 $28,000 $20,000 46,000 $42,000 In 2021, the company performed a comprehensive review of its inventory accounting procedures. Based on this review, company records reveal that ending inventory was understated by $11,000 in 2019. Inventory in all other years is correct
2. Calculate the gross profit ratio for each of the four years based on corrected amounts. (Round your answers to the nearest whole percent.) Gross Ratio 2018 2019 2020 2021

Answers

Answer 1

Answer:

1. Gross Profit ratio

2018 47%

2019 30%

2020 62%

2021 47%

2. Gross Profit ratio

2018 47%

2019 47%

2020 47%

2021 47%

Explanation:

1. Calculation for the gross profit ratio for each of the four years based on amounts originally reported.

2018 2019 2020 2021

Net sales $60,000 $66,000 $74,000 $90,000

Less Cost of goods sold $32,000 $46,000 $28,000 $48,000

=Gross profit$ 28,000 $20,000 $46,000 $42,000

Gross Profit ratio

2018 47% =$28,000/$60,000

2019 30% =$20,000/$66,000

2020 62% =$46,000/$74,000

2021 47% =$42,000/$90,000

2. Calculation for the gross profit ratio for each of the four years based on corrected amounts.

Cost of goods sold 2019=$46,000-$11,000

Cost of goods sold 2019=$35,000

Cost of goods sold 2020=$28,000+$11,000

Cost of goods sold 2020=$39,000

2018 2019 2020 2021

Net sales $60,000 $66,000 $74,000 $90,000

Less Cost of goods sold $32,000 $35,000 $39,000 $48,000

=Gross profit $28,000 $31,000 $35,000 $42,000

Gross Profit ratio

2018 47% =$28,000/$60,000

2019 47% =$31,000/$66,000

2020 47% =$35,000/$74,000

2021 47% =$42,000/$90,000


Related Questions

Negotiations often involve three types of issues. For ______________ issues, the parties' preferences are directly opposed. For ______________ issues, the parties have directionally-opposed preferences but value the issues differently. For ______________ issues, the parties have the same preferences.

Answers

Answer:

1. Distributive issues

2. Integrative issues

3. Congruent issues

Explanation:

Typically, for every negotiation process, any of the three kinds of issues are involved, this includes the following distributive, congruent, and integrative issues.

Hence, Negotiations often involve three types of issues. For DISTRIBUTIVE issues, the parties' preferences are directly opposed. For INTEGRATIVE issues, the parties have directionally-opposed preferences but value the issues differently. For CONGRUENT issues, the parties have the same preferences.

For DISTRIBUTIVE issues, the parties' preferences are directly opposed.

For INTEGRATIVE issues, the parties have directionally-opposed preferences but value the issues differently.

For CONGRUENT issues, the parties have the same preferences.

What is a Negotiation?

A Negotiation refers to method through which parties settle their differences and in reaching an agreement.

Generally, for every negotiation process, any of the three kinds of issues are involved, this includes the following distributive, congruent, and integrative issues.

Read more about Negotiation

brainly.com/question/902450

On January 1, 2000, there were 175,000 tons of trash in a landfill that had a capacity of 325,000 tons. Each year since then, the amount of trash in the landfill increases by 7.500 tons. If y represents the time, in years, after January 1, 2000.

Required:
What inequalities describes the set of years where the landfill is at or above capacity?

Answers

Answer: 175,000 + 7,500y ≥ 325,000

Explanation:

On January 1, 2000, there are 175,000 tons of trash in the landfill.

This increases by 7,500 tons every year with y representing the number of years.

This means that in a given year, the amount of trash in the landfill is:

= 175,000 + 7,500y

The capacity is 325,000 tons. In years where the landfill will be at or above capacity, the result of the formula above will be greater than 325,000 tons.

The relevant inequality therefore is:

175,000 + 7,500y ≥ 325,000

Elbert Company classifies its selling and administrative expense budget into variable and fixed components. Variable expenses are expected to be $26,770 in the first quarter, and $5,240 increments are expected in the remaining quarters of 2020. Fixed expenses are expected to be $41,680 in each quarter. Prepare the selling and administrative expense budget by quarters and in total for 2020.

Answers

Answer:

Results are below.

Explanation:

Giving the following information:

Variable expense= $26,770 ($5,240 increase each quarter)

Fixed expense= $41,680

First, we will calculate the total cost per quarter:

Q1= 26,770 + 41,680

Q1= $68,450

Q2= (26,770 + 5,240) + 41,680

Q2= $73,690

Q3= (32,010 + 5,240) + 41,680

Q3= $78,930

Q4= (37,250 + 5,240) + 41,680

Q4= $84,170

Now, the total cost:

Total annual cost= $305,240

Culver Company is involved in four separate industries. The following information is available for each of the four industries. Operating Segment Total Revenue Operating Profit (Loss) Identifiable Assets W $63,278 $14,930 $155,962 X 10,900 2,380 77,981 Y 27,275 (2,980) 18,823 Z 7,647 1,070 16,134 $109,100 $15,400 $268,900 Determine which of the operating segments are reportable based on the: Reportable Segments (a) Revenue test. select an operating segment (b) Operating profit (loss) test. select an operating segment (c) Identifiable assets test. select an operating segment eTextbook and Media

Answers

Answer:

                                                          Reportable Segments

(a) Revenue test.                                      W and Y

(b) Operating profit (loss) test.                W, X and Y

(c) Identifiable assets test.                      W and X

Explanation:

Note: The data in this question are merged together. They are therefore sorted before answering the question. See the attached pdf file for the complete question with the sorted data.

The explanation of the answers is now given as follows:

Note: See the attached excel file for the determination of the operating segments which are reportable (in bold red color).

Note that the criterion is that a segment is reportable if it contains an amount that is greater than 10% of the total amount. Otherwise, it is nonreportable.

Based on this criterion, we have the following from the attached excel file:

                                                          Reportable Segments

(a) Revenue test.                                      W and Y

(b) Operating profit (loss) test.                W, X and Y

(c) Identifiable assets test.                       W and X

which one of the following best describes the human need?
a.fries
b.burger
c.pizza
d.food
e.none

Answers

Answer:

d. Food.

Explanation:

Human needs consist of numerous things, ranging from money to food to safety. And depending on the severity of a situation, one can always list what one thinks is the most important for a person.

Among the given list of things in the question, the most important that describes the human need is food. Without food, it is not possible for a person to live and survive. Food is and will always constitute one of the most important human needs.

How dose biodiversity affect ecosystem stability

Answers

Answer:

It has been shown that biodiversity of an area has a large impact on the ecosystem stability of that area. this has increase in complexity makes it more likely that the ecosystem will return to a stable state after a disturbance, because the ecosystem has more ways to respond to a disturbance and fix probl

McMurphy Corporation produces a part that is used in the manufacture of one of its products. The costs associated with the production of 12,000 units of this part are as follows: Direct materials $86,000 Direct labor 126,000 Variable factory overhead 58,000 Fixed factory overhead 138,000 Total costs 408,000 Of the fixed factory overhead costs, $55,000 is avoidable. Conners Company has offered to sell 12,000 units of the same part to McMurphy Corporation for $41 per unit. Assuming there is no other use for the facilities, Schmidt should ________. Group of answer choices buy the part, as this would save the company $192,000 buy the part, as this would save $16 per unit make the part, as this would save almost $14 per unit make the part, as this would save $16 per unit

Answers

Answer:

make the part, as this would save almost $14 per unit

Explanation:

We have to compare the total cost to make against the total cost to buy 12,000 units.

Total Cost to Make

Direct materials                                  $86,000

Direct labor                                        $126,000

Variable factory overhead                $58,000

Fixed factory overhead                     $55,000

Total Cost                                          $325,000

Total Cost to buy

Purchase Price = $41 x 12,000 units = $492,000

Difference

Financial Advantage = Total Cost to buy - Total Cost to Make

                                   =  $492,000 - $325,000

                                   = $167,000

Conclusion :

Schmidt should make the part, as this would save almost $14 per unit

On average, your firm receives 65 checks a day from customers. These checks, on average, are worth $39.90 each and clear the bank in 1.5 days. In addition, your firm disburses 38 checks a day with an average amount of $89.50. These checks clear your bank in 2 days. What is the average amount of the collection float? $2,473.80 $3,401.00 $3,890.25 $5,101.50 $6,802.00

Answers

Answer:

$3,890.25

Explanation:

Calculation to determine the average amount of the collection float

Using this formula

Collection float =Average Checks received ×Average checks worth×Bank checks clearing numbers of days

Let plug in the formula

Collection float =65 x $39.90 x 1.5 days

Collection float = $3,890.25

Therefore the average amount of the collection float will be $3,890.25

Which of the following industries is most likely to outsource jobs to another country because of slight increases in labor costs?

a. Milk dairy.
b. High-tech research facility.
c. Textile plant.
d. Automobile assembly plant.

Answers

Which of the following industries is most likely to outsource jobs to another country because of slight increases in labor costs?

a. Milk dairy.

b. High-tech research facility.

c. Textile plant.

d. Automobile assembly plant.

Answer: c. Textile plant.

Hope this helps

Beck Manufacturing reports the following information in T-account form for 2019. Raw Materials Inventory Begin. Inv. 11,600 Purchases 57,000 Avail. for use 68,600 DM used 48,000 End. Inv. 20,600 Work in Process Inventory Begin. Inv. 16,000 DM used 48,000 Direct labor 31,100 Overhead 57,000 Manuf. costs 152,100 Cost of goods manuf. 138,200 End. Inv. 13,900 Finished Goods Inventory Begin. Inv. 17,200 Cost of goods manuf. 138,200 Avail. for sale 155,400 Cost of Goods Sold 136,500 End. Inv. 18,900 Required: 1. Prepare the schedule of cost of goods manufactured for the year. 2. Compute cost of goods sold for the year.

Answers

Answer:

Beck Manufacturing

1. Schedule of the Cost of Goods Manufactured for the year:

Beginning WIP Inventory              16,000

Direct Materials used                   48,000

Direct labor                                     31,100

Overhead applied                        57,000

Total manufacturing costs          152,100

Less Ending WIP Inventory          13,900

Cost of goods manufactured   138,200

2. Cost of goods sold for the year:

Beginning Finished Goods        17,200

Cost of goods manufactured 138,200

Goods available for sale         155,400

Less Ending Finished Goods   18,900

Cost of Goods Sold               136,500

Explanation:

a) Data and Calculations:

T-account form for 2019.

Raw Materials Inventory

Account Title     Debit    Credit

Begin. Inv.         11,600

Purchases       57,000

DM used                        48,000

End. Inv.                         20,600

Avail. for use  68,600   68,600

Work in Process Inventory

Account Title     Debit    Credit

Begin. Inv.        16,000

DM used         48,000

Direct labor      31,100

Overhead       57,000

Cost of goods manuf. 138,200

End. Inv.                         13,900

Manuf. costs 152,100  152,100

Finished Goods Inventory

Account Title     Debit    Credit

Begin. Inv.          17,200

Cost of goods

manufacture  138,200

Cost of Goods Sold      136,500

End. Inv.                           18,900

Avail. for sale 155,400 155,400

A new investment project currently under consideration has a negative net present value of $85,000. The project has a life of 10 years and the minimum required rate of return is 8%. The present value factor for an annuity at 8% for 10 periods is 6.71. What is the amount of annual additional cash flow that is required to make this investment attractive

Answers

Answer:

$12,668

Explanation:

Calculation to determine the amount of annual additional cash flow that is required to make this investment attractive

Using this formula

Annual additional cash flow required=Negative net present value /Present value factor for an annuity at 8% for 10 periods

Let plug in the formula

Annual additional cash flow required= $85,000/6.71

Annual additional cash flow required= $12,668

Therefore the amount of annual additional cash flow that is required to make this investment attractive is $12,668

Contribution Margin and Contribution Margin Ratio
For a recent year, McDonald's company-owned restaurants had the following sales and expenses (in millions):
Sales $18,169.3
Food and packaging $ 6,129.7
Payroll 4,756.0
Occupancy (rent, depreciation, etc.) 4,402.6
General, selling, and administrative expenses 2,487.9
$17,776.2
Income from operations $ 393.1
Assume that the variable costs consist of food and packaging, payroll, and 40% of the general, selling, and administrative expenses.
a. What is McDonald's contribution margin? Round to the nearest tenth of a million (one decimal place).
b. What is McDonald's contribution margin ratio? Round to one decimal place.
c. How much would income from operations increase if same-store sales increased by $500 million for the coming year, with no change in the contribution margin ratio or fixed costs? Round your answer to the nearest tenth of a million (one decimal place).

Answers

Answer:

See below

Explanation:

Variable food and packaging = $6,129.7

Variable payroll = $4,756.0

Variable general, selling and administrative expenses = 40% × $2,487.9 = $995.16

Fixed general, selling and administrative expenses = 60% × $2,487.9 = $1,492.74

Fixed occupancy = $4,402.6

Total fixed cost = $1,492.84 + $4,402.6 = $5,895.34

Total variable cost = Variable food and packaging + Variable payroll + Variable general, selling and administrative expenses

= $6,129.7 + $4,756 + $995.16

= $11,880.86

a. McDonald's contribution margin

= Sales - Variable cost

= $18,169.3 - $11,880.86

= $6,288.44

b. McDonald's contribution margin

= Contribution margin / Sales

= $6,288.44 / $18,169.3

= 34.61%

c. Increase in operating income

= $500 million × 34.71

= $173,050,000

15. A bottle‐filling operation has a target value of 20 and consistently averages 19.8 with a standard deviation of 0.5. The design engineers have established an upper specification limit of 22 and a lower specification limit of 18. Which statement concerning this process is TRUE? A. The two‐sided specification process capability index is 1.47 B. The one‐sided specification process capability index is 1.33 C. The process must be in control D. None of these is true

Answers

Answer:

A. The two sided specification process capability index is 1.47

Explanation:

The formula for calculating process capability index is :

( Upper specification Limit  - Average of mean ) / 3 * Standard Deviation

CI = ( 22 - 19.8 ) / 3 * 0.5

CI = 1.47 approximately.

The accounting records of Nash Inc. show the following data for 2017 (its first year of operations).
1. Life insurance expense on officers was $13,000.
2. Equipment was acquired in early January for $307,000. Straight-line depreciation over a 5-year life is used, with no salvage value. For tax purposes, Nash used a 30% rate to calculate depreciation.
3. Interest revenue on State of Iowa bonds totaled $4,000.
4. Product warranties were estimated to be $55,000 in 2017. Actual repair and labor costs related to the warranties in 2017 were $10,000. The remainder is estimated to be paid evenly in 2018 and 2019.
5. Pretax financial income was $850,000. The tax rate is 30%.
Prepare a schedule starting with pretax financial income in 2017 and ending with taxable income in 2017 Prepare the journal entry for 2017 to record income taxes payable, income tax expense, and deferred income taxes.

Answers

Answer:

Nash Inc.

1. A schedule of taxable income for 2017:

Pretax financial income = $850,000

add:

1. Life Insurance for officers  13,000

2. Interest on Iowa bonds      (4,000)

Excess Depreciation            (30,700) ($92,100 - $61,405)

Non-tax allowed warranties 45,000 ($55,000 - $10,000)

Adjusted pre-tax income   $873,300

Income tax expense (30%) $261,990

2. Journal entry:

Debit Income tax expense $261,990

Credit Income tax payable $261,990

To record income tax payable.

Debit Deferred Tax Asset $13,550

Credit Profit and Loss Account $13,550

To record the deferred tax asset.

Debit Profit and Loss Account $9,210

Credit Deferred Tax Liability $9,210

To record the deferred tax liability.

Explanation:

a) Data and Analysis:

Pretax financial income = $850,000

add:

1. Life Insurance for officers  13,000

2. Interest on Iowa bonds      (4,000)

Excess Depreciation            (30,700) ($92,100 - $61,405)

Non-tax allowed warranties 45,000 ($55,000 - $10,000)

Adjusted pre-tax income   $873,300

Income tax expense (30%) $261,990

Depreciation Excess/Differences:

Equipment cost = $307,000

Depreciation with straight line (5 years)

Annual accounting depreciation expense = $61,400 ($307,000/5)

Annual taxation depreciation expense = $92,100 ($307,000 * 30%)

Deferred tax liability:

Excess Depreciation            (30,700) * 30% =  $9,210

Deferred tax asset:

Non-tax allowed warranties 45,000 * 30$ = $13,550

Match each of the principles and phases in the development of an accounting system with the statement that best describes them.
1. Information must be understandable, relevant, reliable, timely, and accurate.
2. Benefits of information must outweigh the cost of providing it.
3. The system should accommodate a variety of users and changing information needs.
4. The accounting system must consider the needs and knowledge of various users.
5. The system should be capable of meeting the changes in the demands made upon it.
a. Useful output
b. Cost effectiveness
c. Flexibility

Answers

Answer:

. Useful output

Cost effectiveness

Flexibility

Useful output

Flexibility

Explanation:

Accounting principles are  guidelines that should guide companies when reporting  financial data.

If the output is useful, it would contain the information needed by users of accounting information in terms they understand, on time and it should not be misleading

The accounting information should be cost effective. It should be profitable to the company to provide the information. The cost of providing the information should be less than the cost

The information should be flexible. It should not only be suitable for only some particular users of accounting information but to all users of accounting information

Inside the packaging of a new bread machine she purchases, Ginger finds a paper stating, "All our products will be replaced within the first year if they fail to operate correctly. However, consumer misuse or abuse will effectively end this policy." This is a(n) a. implied warranty. b. express warranty. c. statement of guarantee. d. set of instructions for use. e. labe

Answers

Answer:

b. express warranty.

Explanation:

A warranty can be defined as a written promise or guarantee made by a manufacturer, lessor or seller about the identity or quality of goods and services or a property to a purchaser, promising him or her to repair or replace it if necessary within a specified time frame.

An express warranty is typically considered to be an affirmative promise about the quality or characteristics of an item that is being sold to a buyer and as such it is binding and enforceable by law.

Inside the packaging of a new bread machine she purchases, Ginger finds a paper stating, "All our products will be replaced within the first year if they fail to operate correctly. However, consumer misuse or abuse will effectively end this policy." This is an express warranty.

It recognized by the Uniform Commercial Code ("UCC") as explicit, stated promises by a manufacturer.

The Fabricating Department started the current month with a beginning Work in Process inventory of $10,900. During the month, it was assigned the following costs: direct materials, $76,900; direct labor, $24,900; and factory overhead, 70% of direct labor cost. Also, inventory with a cost of $113,500 was transferred out of the department to the next phase in the process. The ending balance of the Work in Process Inventory account for the Fabricating Department is: Group of answer choices $83,461. $196,961. $68,030. $16,630. $112,700.

Answers

Answer:

Ending Work in Process $16,630

Explanation:

The computation of the ending balance of the work in process inventory is shown below:

Beginning Work in process $10,900

Add: Manufacturing Costs  

Direct Materials $76,900

Direct Labor $24,900

Factory Overhead $17,430 (70% of $24,900)

Less: Cost of goods manufactured ($113,500)

Ending Work in Process $16,630

Select the correct answer.
Which product is an athlete more likely to endorse?
A.
wine
B.
fast food
C.
sports drink
D.
tobacco products

Answers

Answer:

Which product is an athlete more likely to endorse? Fast Food

I would say fast food or sports drink I don’t know tho

On January 1, Alan King decided to deposit $58,800 in a savings account that will provide funds four years later to send his son to college. The savings account will earn 8% annually. Any interest earned will be added to the fund at year-end (rather than withdrawn). (FV of $1, PV of $1, FVA of $1, and PVA of $1) (Use the appropriate factor(s) from the tables provided.) Required:

Answers

Answer:

FV= $79,996.75

Explanation:

Giving the following information:

Initial investment (PV)= $58,800

Interest rate (i)= 8% compounded annually

Number of periods (n)= 4 years

To calculate the future value (FV), we need to use the following formula:

FV= PV*(1+i)^n

FV= 58,800*(1.08^4)

FV= $79,996.75

Suppose a firm produces with a technology that exhibits constant returns to scale at all levels of production. The firm's inputs are workers and laptops. The firm sells its output in a perfectly competitive market. It also hires its inputs (hires workers and rents laptops) in perfectly competitive markets. Assume that in the long run the firm produces y units of output using x1 workers and x2 laptops. If the firm doubles the amount of workers and laptops (using 2x1 and 2x2), we would expect the firm's long-run profits to

Answers

Answer:

Not change

Explanation:

In the long run we expect firms to earn zero profits. With competitive markets for both inputs and output, and with constant returns to scale, a doubling of all inputs would lead to twice as much output, twice as much revenue, and twice as much cost.

NU YU announced today that it will begin paying annual dividends. The first dividend will be paid next year in the amount of $0.37 a share. The following dividends will be $0.42, $0.57, and $0.87 a share annually for the following three years, respectively. After that, dividends are projected to increase by 2.8 percent per year. How much are you willing to pay today to buy one share of this stock if your desired rate of return is 9 percent?

Answers

Answer:

P0 = $11.968577  rounded off to $11.97

Explanation:

The dividend discount model (DDM) can be used to calculate the price of the stock today. DDM calculates the price of a stock based on the present value of the expected future dividends from the stock. The formula for price today under DDM is,

P0 = D1 / (1+r)  +  D2 / (1+r)^2  +  ...  +  Dn / (1+r)^n  +  [(Dn * (1+g) / (r - g)) / (1+r)^n]

Where,

D1, D2, ... , Dn is the dividend expected in Year 1,2 and so on g is the constant growth rate in dividends r is the discount rate or required rate of return

P0 = 0.37 / (1+0.09)  +  0.42 / (1+0.09)^2  +  0.57 / (1+0.09)^3  +  

0.87 / (1+0.09)^4  +  [(0.87 * (1+0.028) / (0.09 - 0.028)) / (1+0.09)^4]

P0 = $11.968577  rounded off to $11.97

Rainey Company's true cash balance at October 31 is $4,700. The following information is available for the bank reconciliation: Outstanding checks, $740 Deposits in transit, $540 Bank service charges, $110 The bank had collected an account receivable for Rainey Company, $1,200 The bank statement included an NSF check written by one of Ramsey's customers for $720. What was the unadjusted book balance at October 31

Answers

Answer: $4330

Explanation:

The unadjusted book balance at October 31 is calculated below:

True cash balance = $4700

Add: Bank service charge = $110

Add: NSF Check = $720

Less: Account receivable = $1200

Unadjusted book balance = $4330

How do you solve this :(!! Need a chart

Answers

Answer:

Purchases

Date              Qty               Unit Cost               Total Cost

11                     14                    $15                          $210

21                     9                    $16                          $144

Cost of Sales

Date              Qty               Unit Cost               Total Cost

14

                       14                    $15                           $210

                         6                   $16                            $96

25

                        9                    $16                           $144

                        5                    $16                            $80

Total                                                                        $530

Inventory

Qty               Unit Cost               Total Cost

9                        $16                        $144

Total                                                $144

Explanation:

LIFO method assumes that the units to arrive last, will be sold first. Also note that the perpetual Inventory method is used. This means the cost of sales and inventory value is calculated after every transaction.

So with LIFO , Cost of Sales will be calculated on recent  prices (later prices)  whilst Inventory will be valued at  earlier prices (old prices).

During January, its first month of operations, Dieker Company accumulated the following manufacturing costs: raw materials $5,100 on account, factory labor $7,500 of which $5,800 relates to factory wages payable and $1,700 relates to payroll taxes payable, and factory utilities payable $2,900. Prepare separate journal entries for each type of manufacturing cost. (Credit account titles are automatically indented when amount is entered. Do not indent manually.)

Answers

Answer:

Jan 31

Dr Raw materials inventory $5,100

Cr AccountsPayable $5,100

Jan 31

Dr Work in Process inventory $7,500

Cr Factory wages payable $5,800

Cr Payroll taxes payable $1,700

Jan 31

Dr Manufacturing overhead $2,900

Cr Utilities payable $2,900

Explanation:

Preparation of a separate journal entries for each type of manufacturing cost

Jan 31

Dr Raw materials inventory $5,100

Cr AccountsPayable $5,100

Jan 31

Dr Work in Process inventory $7,500

Cr Factory wages payable $5,800

Cr Payroll taxes payable $1,700

Jan 31

Dr Manufacturing overhead $2,900

Cr Utilities payable $2,900

Priority Company, which applies overhead to production on the basis of machine hours, reported the following data for the period just ended: Actual units produced: 9,000 Actual variable overhead incurred: $54,400 Actual machine hours worked: 16,000 Standard variable overhead cost per machine hour: $3.50 If Priority estimates two hours to manufacture a completed unit, the company's variable-overhead efficiency variance is: Multiple Choice None of the answers is correct. $1,600 favorable. $7,000 favorable. $7,000 unfavorable. $1,600 unfavorable.

Answers

Answer:

The correct option is $7,000 favorable.

Explanation:

This can be calculated using the following formula:

Standard hours for actual units produced = Actual units produced * Estimated number of hours to manufacture a completed unit = 9,000 * 2 = 18,000

Variable-overhead efficiency variance = (Actual machine hours worked - Standard machine hours for actual units produced) * Standard variable overhead cost per machine hour = (16,000 - 18,000) * 3.50 = –$7,000

Since the calculated Variable-overhead efficiency variance is negative, that implies that it is favorable,

Therefore, the correct option is $7,000 favorable.

1. The federal government is considering selling tracts of federally owned land to private developers and using the revenues to provide aid to victims of an earthquake in a foreign country. How would this policy affect the levels of federal revenues, expenditures, and deficits under a cash accounting system

Answers

Answer:

The responses to this question can be defined as follows:

Explanation:

In a currency system, its current amount of the debt is influenced by the cash financial statements, and sales will rise by amount and revenue would be compensated by spending increases on foreign aid. The financial accounting system must realize that its government sold a well-established resource and increased the overall scarcity.

Its capital account weakness relates to an undistorted added money from the currency exchange that would offset a decrease throughout the estimate of the benefits of Congress and lead to an increase in the utilization of the shortfall quickly.

you are a consultant to a firm evaluating an expansion of its current business. The cash flow forecasts (in millions of dollar) for the project as follows: on the basis of the behavior of the firm's stock, you believe that the beta of the firm is 1.30. Assuming that the rate of return available on risk-free investments is 5% and that the expected rate of return on the market portfolio is 15% what is the net present value of the project

Answers

Question

you are a consultant to a firm evaluating an expansion of its current business. The cash flow forecasts (in millions of dollar) for the project as follows:

Year     cashflow

0           -100

1-10            15

0n the basis of the behavior of the firm's stock, you believe that the beta of the firm is 1.30. Assuming that the rate of return available on risk-free investments is 5% and that the expected rate of return on the market portfolio is 15% what is the net present value of the project

Answer:

NPV= -$32.58

Explanation:

The net present value of the investment is the cash inflow from the investment discounted at required rate of return. The required rate of return can be determined using the the formula below:

Ke= Rf +β(Rm-Rf)  

Ke =? , Rf- 5%,, Rm-15%, β- 1.30

Ke=5% + 1.30× (15-5)=  18%

The NPV = Present value of cash inflow - initial cost

 =  A×(1-(1+r)^(-10)/r  - initial cost

A- 15, r-18%

NPV = 15× (1-1.18^(-10)/0.18 - 100= -32.58

NPV = -$32.58

A large brand runs several companies, including a chain of hotels, an automobile business, and a software development firm. Which data warehouse would help the organization view consolidated results of all the businesses?
A.
distributed
B.
LAN based
C.
virtual
D.
multistage
E.
stationary

Answers

Answer:

A.

distributed

Explanation:

In the case of the large brand running several companies, the best data warehouse suitable for them would be distributed type. This is because, it would allow them to house their data separately in the different arms of the business like hotels, automobiles business and software development businesses before the information is linked together and distributed evenly.

The distributed data warehouse allows them to share information among the various arms of the businesses due to the linkage between them.

Times-Roman Publishing Company reports the following amounts in its first three years of operation: ($ in thousands) 2021 2022 2023 Subscription revenue recognized (earned) $ 350 $ 360 $ 320 Subscription payments received in cash 390 340 360 The difference between pretax accounting income and taxable income is due to subscription revenue for one-year magazine subscriptions being reported for tax purposes in the year received, but reported in the income statement in later years when the performance obligation is satisfied. The income tax rate is 25% each year. Times-Roman anticipates profitable operations in the future. Required: 1. What is the balance sheet account that gives rise to a temporary difference in this situation

Answers

Answer: Unearned subscription revenue.

Explanation:

Tax is made on a cash basis which means that a transaction is eligible for taxation once cash has been paid for it. Businesses however have to use the Accrual basis which only record transactions in the period that they have been incurred.

In this scenario, there is more subscription payment in cash than the company recognized which means that the company has not yet delivered the service they were paid for and so could not recognize the subscriptions. They will however be taxed on those amounts because the cash has come in.

The account giving this temporary difference is therefore the Unearned Subscription Revenue account.

Super Saver Groceries purchased store equipment for $43,000. Super Saver estimates that at the end of its 10-year service life, the equipment will be worth $4,000. During the 10-year period, the company expects to use the equipment for a total of 13,000 hours. Super Saver used the equipment for 1,200 hours the first year. Required: Calculate depreciation expense of the equipment for the first year, using each of the following methods. (Do not round your intermediate calculations.)

Answers

Answer:

$3900

$8600

$3600

Explanation:

This is the remaining part of the question :

Required: Calculate depreciation expense of the equipment for the first year, using each of the following methods

1. Straight-line.

2.Double Declining Method

3.Activity Based

Straight line depreciation expense = (Cost of asset - Salvage value) / useful life

(43,000 - 4000) / 10 = $3900

Depreciation expense using the double declining method = Depreciation factor x cost of the asset

Depreciation factor = 2 x (1/useful life) = 2/10 = 0.2

Depreciation expense = 0.2 x $43,000 = $8600

Activity method based on hours worked = (hours worked that year / total hours of the machine) x  (Cost of asset - Salvage value)

(1200 / 13,000) x (43,000 - 4000) = $3600

Other Questions
AP* Price discrimination occurs when differences in a product's price reflect differences in marginal costs differences in a product's price reflect differences in marginal costs a products's average cost is greater than its average revenue a products's average cost is greater than its average revenue differences in a product's price do not reflect differences in costs of production differences in a product's price do not reflect differences in costs of production a product's average cost is less than its average revenue a product's average cost is less than its average revenue the supply of the product is elastic Use multiplication to create an equivalent fraction.3/5 =\(\frac{?}{15}\) How many zeros does the equation7x^4 - 63x^3 -29x^2+10x+15 have? Which is not a defense mechanism Anyone know the answer to this ? A force of 12 N changes the momentum of a toy car from 3kgm/s t0 10kgm/s. Calculate the time the force took to produce this change in momentum. Question here I need help with this 15. _____ is the breakdown of rocks into smaller particles by natural processes.A. DepositionB. WeatheringC. Erosion How did trade lead to population growth in Mesoamerica? 15 is 20% of what number? Enter your answer in the box. Both __________ and __________ affect the awareness and motivation of a firm to undertake actions and responses. a. first-mover advantages; corporate size b. market commonality; resource similarity c. management capabilities; competitive analysis d. speed of management decisions; management actions The text states that ...everybody in the universe is attracted to every other body in the universe. What does the word body mean in this context? Which example best describes the term sedentary?working out at the gym once a yearjumping rope with friends on Saturdaysdoing several sit-ups three times a weekjogging in the neighborhood every evening the hotog eating champion eats 27.5 hot dogs in 4 minutes. at that rate how many does he eat in the 10 min competition? In the sequence: 20, 25, 23, 28, 26, , what number should come next?a) 24b) 31c) 21d) 28 Data on the level of support for corporate sustainability (measured on a quantitative scale ranging from 0 to 160 points) for each of 992 senior managers at CPA firms are saved in CORSUS.txt a) Construct a histogram for the data and use it to evaluate the validity of the normality assumption. b) Obtain the mean and standard deviation for the data and use these statistics to evaluate the validity of the normality assumption. c) Obtain the interquartile rage for the data and use these statistics to evaluate the validity of the normality assumption Winston earns $140.00 by selling 56 hot dogs at a concession stand at school. Using the same rate for the cost of one hot dog, how many more hot dogs would winston need to sell to earn a total of 185.00? What arethe things which lead to smoking Please help me with this question I dont want to get it wrong. How do you graph it ?