The answer for this

time travel is the best option

Answer:

Explanation:

The standard molar mass is:

For (S )-1-chloro-4-ethyl-2-methylhexane = 162.5 g/mol

For triphenylphosphine  = 262 g/mol

For  ( S )-1-chloro-4-ethyl-2-methyl triphenylphosphonium = 424.5 g/mol

The mass required for 81% yield = [tex]\dfrac{81}{100} \times Theoretical \ yield = 4.15 g[/tex]

Theoretical yield = [tex]\dfrac{4.15}{0.81}[/tex]

= 5.1235 g

thus, since 424.5 g yield produce from 162.5 g

∴

5.1235 g yield will produce = [tex]\dfrac{162.5}{424.5}\times 5.1235 \ g[/tex]

= 1.9613 g of alkyl halide (-chloro) required.

Also, since 424.5 g yield produce from 262 g phosphine

∴

5.1235 g yield will produce = [tex]\dfrac{262}{424.5}\times 5.1235 \ g[/tex]

= 3.1622 g of triphenylphosphine required.

Sodium chloride is the chemical name for salt and is composed of sodium and chlorine, so it is a compound.

Answer: The formula of the hydrate is [tex]MnSO_4.2H_2O[/tex]

Explanation:

Decomposition of hydrated manganese sulphate is given by:

[tex]MnSO_4.xH_2O\rightarrow MnSO_4+xH_2O[/tex]

Molar mass of [tex]MnSO_4[/tex] = 151.0 g/mol

According to stoichiometry:

(151.0+18x) g of [tex]MnSO_4.xH_2O[/tex] decomposes to give 151.0 g of [tex]MnSO_4[/tex]

Thus 45.91 g of [tex]MnSO_4.xH_2O[/tex] decomposes to give= [tex]\frac{ 151.0}{151.0+18x}\times 45.91g[/tex]  of [tex]MnSO_4[/tex]

Also we are given : 37.07 g of  [tex]MnSO_4[/tex] is produced

Thus we can equate the two equations:

[tex]\frac{ 151.0}{151.0+18x}\times 45.91=37.07[/tex]

[tex]x=2[/tex]  

Thus the formula of the hydrate is [tex]MnSO_4.2H_2O[/tex]

Answer:

46 g

Explanation:

First we convert 1.2 x 10²⁴ atoms of sodium into moles, using Avogadro's number:

Then we convert 2.0 moles of sodium into grams, using sodium's molar mass:

Thus, there are 46 grams in 1.2x10²⁴ atoms of sodium.

Answer:

b

Explanation:

Answer:

D. Dry

Explanation:

Colorado's combination of high elevation, midlatitude, and continental interior geography results in a cool, dry climate.

Answer:

The standart temperature is 273.15 degrees Kelvin

Explanation:

Answer:

i would say its 0 degrees celcius

Explanation:

Answer:

Transform = The third one

Convergent  = the first one

Divergent = the second one

Explanation:

Answer:

Farenheit

Explanation:

STP is used to measure standard temperature and pressure -- it uses Kelvin for temperature, not Farenheit.

Answer:

Hey mate......

Explanation:

This is ur answer.......

The largest star, and indeed the only star in our solar system, is the sun. The sun is a bit under a million miles across. About 110 Earths put side by side would equal the size of the sun. The sun has 99.8 percent of the mass of our solar system.

Hope it helps!

Mark me brainliest pls......

Follow me! :)

yes hahahahahahah......

Answer:

0.1795 M

Explanation:

From the given information:

The equation is:

[tex]\mathbf{HF_{(aq)}+ KOH_{(aq)} \to KF _{(aq)} + H_2O}[/tex]

From the above equation, the reaction will go to completion due to the strong base:

At the equivalence point, moles of acid (HF) will be equal to moles of base (KOH)

[tex]\text{Number of moles = Volume} \times Molarity[/tex]

Thus. since moles of HF = moles of KOH

Then; 0.020 × 0.393 M = 0.02379 × (x) M

(x) M = [tex]\dfrac{0.02 \times 0.393 \ M}{0.02379}[/tex]

(x) = 0.3304 M

Thus, the molarity of KOH = 0.3304 M

Using the balanced neutralization reaction;

moles of HF = moles of KOH = moles of conjugate base = 0.00786 mol

∴

Volume = 0.020 L + 0.02379 L

Volume = 0.04379 L

Volume of the solution =  0.04379 L

Therefore; Molarity = [tex]\dfrac{moles}{volume}[/tex]

Molarity = [tex]\dfrac{0.00786 \ mol}{0.04379 \ L}[/tex]

Molarity = 0.17949 mol/L

= 0.1795 M

After the initial neutralization, the molarity at the equivalence point will be:

"0.17949 mol/L"

According to the question,

→ HF (aq) + KOH (aq) [tex]\rightarrow[/tex] KF (aq) + H₂O

Since, moles of HF = moles of KOH

We know that,

Number of moles = Volume × Molarity

→ 0.020 × 0.393 = 0.02379 × M

By applying cross-multiplication,

The molarity of KOH be:

M = [tex]\frac{0.02\times 0.393}{0.02379}[/tex]

   = [tex]\frac{0.00786}{0.02379}[/tex]

   = 0.3304 M

By using balanced neutralization reaction,

Volume = 0.020 + 0.02379

             = 0.04379 L

hence,

The molarity will be:

= [tex]\frac{Moles}{Volume}[/tex]

By substituting the values,

= [tex]\frac{0.00786}{0.04379}[/tex]

= 0.17949 mol/L

Thus the response above is correct.

Find out more information about concentration here:

https://brainly.com/question/24595796

Answer:In the LATER stages of development they would have a spine

Explanation:

Answer: Hotspot: A hotspot is a physical location where people can access the Internet, typically using Wi-Fi, via a wireless local area network (WLAN) with a router connected to an Internet service provider. ... While many public hotspots offer free wireless access on an open network, others require payment.

A hot spot is an area on Earth over a mantle plume or an area under the rocky outer layer of Earth, called the crust, where magma is hotter than surrounding magma. The magma plume causes melting and thinning of the rocky crust and widespread volcanic activity.

Explanation: MY own word's.

Answer:

Attached below diagram of the eight diastereomers

The Isomer that reacts so slowly is DIASTEREOMER 8

Explanation:

The Isomer that reacts so slowly is DIASTEREOMER 8 in an E2 reaction and this is because no pair of chlorine and hydrogen atoms can assume the anti-periplanar orientation that is preferred in an E2 elimination

attached below is Diagram of the eight diastereomers ( screen shot from my drawing tool )

Answer:

Answer:

benzoic acid: pka = 4.19

Explanation:

Answer:

See explanation

Explanation:

The synthesis of asprin involves the;

i) Hydrolysis of Methyl salicylate

ii) Reaction of salicylic acid with acid anhydride

The chemical name of asprin is acetylsalicylic acid.

It is preferable to use an acid anhydride for ester formation with an alcohol rather than a carboxylic acid because we will not produce water which can then cause the hydrolysis of the newly formed ester.

Answer:

The pH of a solution is a measure of the concentration of hydrogen ions in the solution. A solution with a high number of hydrogen ions is acidic and has a low pH value. A solution with a high number of hydroxide ions is basic and has a high pH value. The pH scale ranges from 0 to 14, with a pH of 7 being neutral.

Answer:

B) 1S and 40

hope it helps

Answer:

b is ur answer

Explanation:

1S and 4O

Answer:

Molar mass of N3H4 name is 84.0761 g/mol

Convert between N3H4Na(CH3) weight and moles

The chemical name for the formula N₃H₄  is Trinitrogen Tetrahydride

        C , P ,  N ,  H ,  S ,  I ,  Br ,  Cl ,  O ,  F .

        So Now for N₃  =  Tri Nitogen

        and for H₄   =  Tetra Hydride

 Therefore the chemical name is Trinitogen Tetrahydride.

To know more about Chemical Compound

https://brainly.com/question/12166462

#SPJ2

Answer:

the first one

Explanation:

I looked it up:P

Only the 2nd answer is right, uncheck the 1st one

Explanation:

If we had a chemical formula like [tex]3(O_{2} )[/tex] the 3 means there are 3 molecules of [tex]O_{2}[/tex]. The 2 means there are two atoms of oxygen in each molecule.

Answer:

hello the options related to your question is missing attached below is the complete question with the options

answer:

Any visible bands were found in the small area above the wells instead in the expected large bottom area of the gel, because Amanda should have placed the wells into the black (-) end of the chamber for DNA to move towards the opposite red (+) end of the gel.   (  2 )

Explanation:

Why Amanda did not see any bands in the region that she was expecting is because during electrophoresis ( which allows the distinguishing of various lengths of DNA fragments on a gel )  the DNA been negative will migrate to the positively charged  electrodes and  The shorter brands will move faster through the gel, providing DNA fragments arrangements on the gel according to size.

Answer:

Solid

Explanation:

Molecules in solids only vibrate in place, while the other two have moving molecules

Answer:

P4O10

Explanation:

(P2O5)n=283.89

62+80=283.89

142n=283.89

n=2

P2O10

The empirical and molecular formula are related by the formula, molecular formula=2×empirical formula ,meaning double the atoms present in empirical formula,hence molecular formula is P₄O₁₀.

Empirical formula of a compound is defined as the simplest whole number ratio of atoms which are present in a compound.It does not make any mention of the arrangement of atoms or the number of atoms. The empirical formula gives information about the ratio of number of atoms which are present in a compound.

Molecular formula is determined from the empirical formula by dividing the molar mass of a compound by the empirical formula mass. The resultant which should be a whole number or very close to the whole number , then the subscripts are multiplied by the whole number to get the molecular formula.

For the compound P₂O₅ the subscripts of phosphorous and oxygen are multiplied by 2 and hence the molecular formula P₄O₁₀.

Learn more about empirical formula,here:

https://brainly.com/question/11588623

#SPJ2

Answer: The total pressure is 7 atm

Explanation:

According to Dalton's law, the total pressure is the sum of individual pressures.

[tex]p_{total}=p_A+p_B+p_C...[/tex]

Given : [tex]p_{total}[/tex] =total pressure of gases = ?

[tex]p_{O_2}[/tex] = partial pressure of oxygen = 2 atm

[tex]p_{N_2}[/tex] = partial pressure of nitrogen = 4 atm

[tex]p_{Ar}[/tex] = partial pressure of argon = 1 atm

putting in the values we get:

[tex]p_{total}=2atm+4atm+1atm[/tex]  

[tex]p_{total}=7atm[/tex]

Thus the total pressure is 7 atm

Answer:

2Zn2+3O2 ----> 2ZnO+2SO2

Explanation: