Answer:
38.09 m
Explanation:
We'll begin by calculating the distance travelled by the car during the reaction time. This can be obtained as follow:
Reaction time (tᵣ) = 0.404 s
Initial velocity (u) = 22.8 m/s,
Distance travelled during the reaction time (sᵣ) =?
sᵣ = utᵣ
sᵣ = 22.8 × 0.404
sᵣ = 9.21 m
Next, we shall determine the distance travelled by the car when the brake was applied. This can be obtained as follow:
Initial velocity (u) = 22.8 m/s
Acceleration (a) = –9 m/s² (since the car is decelerating)
Final velocity (v) = 0 m/s
Distance travelled when the brake was applied (s₆) =?
v² = u² + 2as₆
0² = 22.8² + (2 × –9 × s₆)
0 = 519.84 – 18s₆
Collect like terms
0 – 519.84 = –18s₆
–519.84 = –18s₆
Divide both side by –18
s₆ = –519.84 / –18
s₆ = 28.88 m
Finally, we shall determine the stopping distance of the car, as measured from the point where the driver first notices the red light. This can be obtained as follow:
Distance travelled during the reaction time (sᵣ) = 9.21 m
Distance travelled when the brake was applied (s₆) = 28.88 m
Stopping distance =?
Stopping distance = sᵣ + s₆
Stopping distance = 9.21 + 28.88
Stopping distance = 38.09 m
Answer this and you get 100 points
You better answer it quick though
Answer what? Apologies, but I don't see anything. (。>︿<)
Do You think History is the most important subject that deserves first place? Do you see a way that learning history could assist you in your future career?
yes
Explanation:
history is an important class and it helps to you understand what went on in the past so that we can learn from our mistakes and help us grow
How do projectors project the color black?
Answer:
Projectors do not project the color black. This makes sense since black is really the absence of light, and you can't project something that does not exist. When a projector sends a beam of light on to a wall or a projector screen so that an image is formed on the wall or screen, the parts of the image that look black are really a very dim white color (which we sometimes call gray). - wtamu
Answer is:
Projectors do not project the color black.
A 0.500 cm diameter plastic sphere, used in a static electricity demonstration, has a uniformly distributed 44.0 pC charge on its surface. What is the potential near its surface
Answer:
Explanation:
Radius of sphere R = .250 x 10⁻² m
Potential on the surface V = k Q / R , where Q is charge on the surface , R is radius of the surface and k = 9 x 10⁹
Q = 44 x 10⁻¹² C
V = 9 x 10⁹ x 44 x 10⁻¹² / ( .25 x 10⁻²)
= 1584 x 10⁻¹ Volt .
= 158.4 Volt
Which option tells the forces that influence the movement of earths plates
Answer:
Gravity
Explanation:
Peter, a 100 kg basketball player, lands on his feet after completing a slam dunk and then immediately jumps up again to celebrate his basket. When his feet first touch the floor after the dunk, his velocity is 5 m/s downward; when his feet leave the floor 0.50 s later, as he jumps back up, his velocity is 4 m/s upward. a. What is the impulse exerted on Peter during this 0.50 s
Answer:
Explanation:
Impulse = change in momentum
Initial momentum = mass x initial velocity = 100 x 5 = 500 kg m/s
final momentum = mass x final velocity = 100 x - 4 = -400 ( - ve sign due to reversal of direction )
change in momentum = final momentum - initial momentum
= - 400 - 500 = - 900 kg m/s .
As it is - ve , it acts upwards .
So magnitude of impulse on Perter = 900 kg m/s
Astronomers study the electromagnetic radiation emitted by distant stars and planets to determine things like: how far away they are, their temperatures and speed, etc. Based on what you learned in this class, explain why the NASA Hubble Space Telescope is better for observing the electromagnetic radiation emitted from stars and planets at 560 km above sea level compared to the Keck telescope in Hawaii, which is 4 km above sea level
Answer:
This same Hawaii telescope, which would be 4 km across water level, can't provide an appropriate version of distanced planetary bodies. A further overview is provided below.
Explanation:
The surface area of that same earth's orbit seems to be approximately 480 km heavy. The atmosphere isn't translucent to the only certain wavelength range of the radioactivity. Not because all-stars, as well as gliders, emit specific wavelengths, but several of them generate ultraviolet as well as infrared. Those same radiations have either been mediated primarily as well as passes through the atmosphere. Due to the Blockage, they can't even be interpreted with such a similar quality unless the telescope would be positioned throughout the portion of the atmosphere.6 An object can never have
A. a positive speed.
B. a negative speed.
C. a positive velocity.
D. a negative velocity.
Answer:
B
Explanation:
Speed is the magnitude of the velocity vector, so it can never be negative.
An object can never have a negative velocity. Therefore, option (D) is correct.
What is velocity?Velocity is a vector quantity that describes an object's speed and direction of motion. If an object is moving in a positive direction, it has a positive velocity. If it is moving in the opposite direction, it has a negative velocity.
However, an object can never have a negative speed. Speed is a scalar quantity that describes an object's rate of motion, and it is always positive. The speed of an object can be positive or negative, depending on the direction of its velocity, but the magnitude of its speed is always positive.
Learn more about velocity, here:
https://brainly.com/question/18084516
#SPJ6
Describe the political actions that led to successful conservation in both stories.
Answer:
The political actions that led to successful conservation in both stories were what they call an FC company that makes the forest industry true. They make it out of a factory and it can make it very successful and accomplished.
Explanation:
Pulling a rubber band back and then letting it fly across the room is an example of
A. converting energy to work
B. converting elastic energy to gravitational
C. converting kinetic energy to potential
Answer:
b
Explanation:
because a elastic band uses elastic energy
Heart Disease is the number one cause of preventable death in the United States
A True
B False
Heart disease is the leading cause of death for both men and women. This is the case in the U.S. and worldwide. More than half of all people who die due to heart disease are men.
TRUE
A 200-N force acts on a 10-kg object. The acceleration of the object is
Which of the following is NOT a characteristic of noble gases?
unreactive
odorless
solid at room temperature
colorless
To have the highest magnification in a telescope, the focal length of the objective lens should be _________ and the focal length of the eyepiece lens should be ________. To have the highest magnification in a telescope, the focal length of the objective lens should be _________ and the focal length of the eyepiece lens should be ________. small; small small; large large; small large; large
Answer:
Large; small.
Explanation:
A telescope can be defined as an optical instrument or device which comprises of a curved mirror and lenses used for viewing distant objects i.e objects that are very far away such as stars and other planetary bodies. The first telescope was invented by Sir Isaac Newton.
To have the highest magnification in a telescope, the focal length of the objective lens should be large and the focal length of the eyepiece lens should be small.
This ultimately implies that, the eyepiece lens has a small focal length while the objective lens has a large focal length.
50 points Two waves combine with constructive interference. What must be true of the
combined wave that forms?
A. It has a lower frequency than that of the original waves.
B. It has a higher amplitude than that of the original waves.
C. It has a higher frequency than that of the original waves.
D. It has a lower amplitude than that of the original waves.
Answer:
it has a higher amplitude than that of the original waves
Explanation:
trust me its right
The two waves combined with constructive interference have a higher amplitude than the original wave.
Which wave has the highest amplitude?High energy waves are characterized by high amplitude. Low energy waves are characterized by their small amplitude. As explained in Lesson 2, wave amplitude is the maximum amount of particle movement on a medium from a resting position.
What are superposition and interference?Superposition is a combination of two waves in the same place. Constructive interference occurs when two identical waves interfere in phase. Destructive interference occurs when two identical waves are exactly out of phase and overlap.
Learn more about higher amplitude waves at
https://brainly.com/question/19036728
#SPJ2
How much force does it take to give a 70 kg object an acceleration of 20 mls2
Answer:
heyy
Explanation:how r uuu
The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would....
A Increase
B Decrease
C Stay the Same
D Vary with day and night
Answer:The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would..
Explanation: It would decrease.
The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would decrease because the acceleration due by gravity on the moon is less than the acceleration due to gravity on the earth, therefore the correct answer is option C.
What is gravity?It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another.
In comparison to the Earth, the Moon is less massive. Your weight would drop if you traveled to the moon because the acceleration caused by gravity there is lower than that caused by gravity here on Earth.
As a result of the less gravity on the moon, the weight would decrease.
Thus, the correct answer is option C.
To learn more about gravity from here, refer to the link;
brainly.com/question/4014727
#SPJ2
Based on the data, which statement describes the most reliable way to
encode and transmit data and tells why?
A. Digital waves are more reliable because they are less likely to
change when copied.
B. Analog waves are more reliable because they include a range of
values like the original.
C. Analog waves are more reliable because they are less likely to
change when copied.
D. Digital waves are more reliable because they are slightly different
from the original.
Answer:it’s A. right for ape x
Explanation:
Based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
What is a wave?A wave is a periodic distortion capable of traveling through a suitable media (either air or water).
The waves can be classified according to their direction into transversal and perpendicular.In conclusion, based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
Learn more on waves here:
https://brainly.com/question/15663649
#SPJ2
you describe a friend’s position by including distance, direction, and what other term?
Answer choices:
A. Acceleration
B.displacement
C.Average speed
D. Reference point
PLEASE HELP I NEED THIS IN AN HOUR
Answer:
Acceleration
Explanation:
Answer: Acceleration
Explanation:
Which subatomic particle is NOT found in the nucleus of an atom? *
protons
neutrons
electrons
Answer:
Electrons
Explanation:
Only Protons and Neutrons are found in the nucleus
A wheelbarrow is pushed 10 meters with a force of 75 N for 30 seconds. What is the work done?
How much power is needed?
HELP ASAP PLS
A balloon with a positive charge will stick to a wall that has a negative charge.
What force causes this?
A. Gravity
B. Electric force
C. Magnetic force
D. Air gesistance
how is friction involved in the movement of space
Answer:
Friction can stop or slow down the motion of an object.
Explanation:
The slowing force of friction always acts in the direction opposite to the force causing the motion.
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer:
10 J.
Explanation:
Given that,
Net force acting on the rake, F = 2 N
Distance moved by the rake, d = 5 m
We need to find the kinetic energy gained by the rake. We know that,
Kinetic energy = work done
So,
K = F×d
K = 2 N × 5 m
K = 10 J
So, 10 J of kinetic energy is gained by the rake.
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer: 10 J
Thomas knows that many machines transform electrical energy into other forms of energy
Answer:
Only the car transforms electrical energy into more than one form of energy.
Explanation:
The motion of the car is mechanical energy but it can also transform into another energy witch is electrical energy
a sensor light installed on the edge of a home can detect motion for a distance of 50 feet in front and with a range of motion of 200 degrees. what is the arc length of the area covered
Answer:
4363.3231 feets²
Explanation:
Given that :
Distance, r = 50 ft
θ = 200°
The arc length of area covered :
Arc length = θ/360° * πr²
Arc length = (200/360) * 50 ft ^2 * π
Arc length = 0.5555555 * 2500 * π
Arc length = 4363.3231 feets²
When the material in the mantle cools off near the surface then sinks
down towards the core and get heated again and rises back towards the
surface it is called?
Condensation
О
The water cycle
O
Convection currents
О
Apples and Bananas.
PLEASE HELP THIS IS URGENT ITS FOR A TEST
Answer:
convection currents
Explanation:
Orion, also called the Hunter, has three stars that make up Orion's belt.
Which star is at the tip of the arrow? PLEASE HELP I NEED THIS FAST
A. Sirius
B. Betelgeuse
C. Rigel
D. Polaris
Answer - B. Betelguese.
I really hope this helps!!
which particles do not affect the stability of the atom
Electrons are the particle pr4esent inside the atom that does not affect the stability of the atom,
What is radioactivity?The ability of some unstable atoms to emit nuclear radiation spontaneously, typically in the form of alpha or beta particles frequently accompanied by gamma rays, is known as radioactivity.
An overabundance of neutrons or protons can make the nucleus of an atom unstable.
A radioactivity atom will try to become stable by extruding other particles, such as protons or neutrons, or by releasing energy in various ways.
Thus, Electrons are the particle present inside the atom that does not affect the stability of the atom,
To learn more about radioactivity here, refer to the link;
https://brainly.com/question/13950350
#SPJ2
true or false solubility can be used to identify an unknown substance