Configuring an Active Directory Domain Controller
1.Why would an administrator want to use the MAP Toolkit?
2.Based on the results of the MAP inventory you performed in the lab, which operating system was installed on the TargetWindows02b server?
3.Based on the results of the MAP inventory you performed in the lab, which desktop and server software was installed on the TargetWindows02b server?
4.Which tasks, other than the ones performed in this exercise, can administrators use the MAP Toolkit to perform?
5.Which utility is used to transform a standalone Windows Server 2012 R2 system into an Active Directory domain controller?
6.What is the importance of SafeModeAdministratorPassword when using PowerShell to install and configure Active Directory?
7.What considerations should you take into account when choosing a domain name?
Answer:
wat
Explanation:
Which control would be used to manually feed a cutting tool longitudinally across the workpiece?
The carriage handwheel is used to manually position and/or hand feed the carriage in the longitudinal or Z axis.
IamSugarBee
Technician a says that diesel engines can produce more power because air in fuel or not mix during the intake stroke. Technician be says that diesel engines produce more power because they use excess air to burn feel who is correct
Answer:
Technician be says that diesel engines produce more power because they use excess air to burn feel who is correct
Explanation:
He is correct as many engines are run by diesel. It produces more power as that is how cars produce more power.
In the United States, a bicyclist is killed:
A. (Every 12 hours
B. Every week
c. Every day
D. Every 6 hours
In the United States, it should be noted that a bicyclist is killed every six hours.
The cause of the accidents has been attributed to the rough driving of vehicle drivers and some faults are on the part of the cyclist as well.
Rapidly overtaking a bicycle is dangerous. Also, there are some vehicle drivers who drive into the lanes that are meant for cyclists. This isn't appropriate.
Drivers should ensure that they are not close to the cyclists when driving as there should be a space of at least 3 feet between the bicycle and the vehicle.
Furthermore, when there is a narrow traffic lane, the vehicle drivers should ensure that there's a clear traffic in the opposite lane before they change their lanes.
Lastly, both the cyclists and the vehicle drivers should not overspeed and drive safely.
Based in the information given above, the correct option is D.
Read related link on:
https://brainly.com/question/20937766
Why are most products the result of an innovation instead of an invention?
Answer:
they were updated rather than being created
Answer:
Invention is about creating something new, while innovation introduces the concept of “use” of an idea or method.
At a specified point on a highway, vehicles are known to arrive according to a Poisson process. Vehicles are counted in 20-second intervals, and vehicle counts are taken in 120 of these time intervals. It is noted that no cars arrive in 18 of these 120 intervals. Approximate the number of these 120 intervals in which exactly three cars arrive. Estimate the percentage of time headways that will be 10 seconds or greater and those that will be less than 6 seconds.
To understand the concept of moment of a force and how to calculate it using a scalar formulation.
The magnitude of the moment of a force with a magnitude F around a point O is defined as follows:
MO=Fd
where d is the force's moment arm. The moment arm is the perpendicular distance from the axis at point O to the force's line of action.
A stool at a restaurant is anchored to the floor. When a customer is in the process of sitting down, a horizontal force with magnitude F1 is exerted at the top of the stool support. When the customer is seated, a vertical force with magnitude F2 is exerted on the stool support. If the maximum moment magnitude that the stool support can sustain about point A is MA = 160 Nm , what is the maximum height d1 that the stool can have if the magnitudes of the two forces are F1 = 300 N and F2 = 720 N . Assume that moments acting counterclockwise about point A are positive whereas moments acting clockwise about A are negative.
Answer:
When analyzing forces in a structure or machine, it is conventional to classify forces as external forces;
constraint forces or internal forces.
External forces arise from interaction between the system of interest and its surroundings.
Examples of external forces include gravitational forces; lift or drag forces arising from wind loading;
electrostatic and electromagnetic forces; and buoyancy forces; among others. Force laws governing these
effects are listed later in this section.
Constraint forces are exerted by one part of a structure on another, through joints, connections or contacts
between components. Constraint forces are very complex, and will be discussed in detail in Section 8.
Internal forces are forces that act inside a solid part of a structure or component. For example, a stretched
rope has a tension force acting inside it, holding the rope together. Most solid objects contain very
complex distributions of internal force. These internal forces ultimately lead to structural failure, and also
cause the structure to deform. The purpose of calculating forces in a structure or component is usually to
deduce the internal forces, so as to be able to design stiff, lightweight and strong components. We will
not, unfortunately, be able to develop a full theory of internal forces in this course – a proper discussion
requires understanding of partial differential equations, as well as vector and tensor calculus. However, a
brief discussion of internal forces in slender members will be provided in Section 9.
Explanation:
A sample of soil has a volume of 0.45 ft^3 and a weight of 53.3 lb. After being dried inan oven, it has a weight of 45.1 lb. It has a specific gravity of solids of 2.70. Compute its moisture content and degree of saturation before it was placed in the oven.
Answer:
a) the moisture content before it was placed in the oven is 18.18%
b) degree of saturation for soil is 72.19%
Explanation:
Given the data in the question;
Moisture Content = [(Weight of soil before dry - dry weight) / dry weight] × 100
so we substitute
Moisture content = [(53.3 - 45.1) / 45.1 ] × 100
= (8.2/45.1) × 100
= 18.18%
Therefore the moisture content before it was placed in the oven is 18.18%
Dry Unit Weight = dry weight / volume
Dry Unit Weight = 45.1 lb / 0.45 ft³
Dry Unit Weight = 100.22 lb/ft³
we know that;
dry unit weight = (Specific gravity × unit weight of water) / (1 + e)
we also know that; unit weight of water is 62.43 lbf/ft³
so we substitute
e = (2.70×62.43 / 100.22) - 1
e = 1.68 - 1
e = 0.68
so void ratio e = 0.68
Now we determine the degree of saturation using the equation;
degree of saturation = (Moisture content × specific gravity) / void ratio
we substitute
degree of saturation = ( 18.18% × 2.7) / 0.68
= 0.49086 / 0.68
= 0.7219 ≈ 72.19%
Therefore degree of saturation for soil is 72.19%
In the context of electronics, the term "ground" is often used to refer to:
1: the negative battery terminal
2:the breadboard
3:the circuit diagram
4:the components
Which one is the answer
Answer:
1: the negative battery terminal
Explanation:
When we design and develop an electrical circuit in electrical and electronics engineering, it is important that we define a reference point for all electronic signals from which we can measure voltage. Although, the voltage passing through a reference point in an electrical circuit is typically 0 Volts.
Also, a ground is a common return path in an electrical circuit for the current flowing through the circuit.
When working on a direct current (DC) circuit that is mainly operated using a battery, the negative terminal of the battery would be the ground (reference point) for all the components connected to the electrical circuit.
Hence, in the context of electronics, the term "ground" is often used to refer to the negative battery terminal.
Joe, a technician, is attempting to connect two hubs to add a new segment to his local network. He uses one of his CAT5 patch cables to connect them; however, he is unable to reach the new network segment from his workstation. He can only connect to it from a workstation within that segment. Which of the following is MOST likely the problem?
A. One of the hubs is defective.
B. The new hub is powered down.
C. The patch cable needs to be a CAT6 patch cable.
D. The technician used a straight-through cable.
Answer:
Option D. is correct
Explanation:
Joe uses one of his CAT5 patch cables to connect two hubs to add a new segment to his local network. As he can only connect to it from a workstation within that segment, he is not able to reach the new network segment from his workstation.
The most problem is that the technician used a straight-through cable.
Option D. is correct.
Which option identifies the type of engineer described in the following scenario?
Sean is an engineer whose current project is a skyscraper in Richmond, VA. He relies heavily on geometry in his research of building design.
Material
Civil
Mechanical
Chemical
Answer:
civil
Explanation:
mark be branilist
Answer:
Civil
Explanation:
civil engineering – the application of planning, designing, constructing, maintaining, and operating infrastructure while protecting the public and environmental health, as well as improving existing infrastructure that may
Consider the following statement concerned with the collection of data, and determine the best selection of terms to complete the statement: "The entire group of objects or peopleabout which information is wanted is called the __________ . Individual members are called _____________. The _________is the part that is actually examined in order to gather information.
a. population, units, sample
b. sample, units, target population
c. response group, respondents, nonresponse group
d. population, dependend variables, subgroup
Answer:
a. population, units, sample
Explanation:
In a survey or in a research, population is defined as the total number of people or total number of items in the group that we want to study in a research. It is the entire pool from where a sample is drawn.
An unit is defined as the individual members for which the information or data is collected.
A sample is defined is defined as the group or part of the selection from where the information or data is to be obtained.
The overall group of people should be known as the population.
The individual members should be units
And, the sample represents the part that should be examined.
What are population, units, and the sample?The population refers to the total no of people or items that are required to be studied for the research purpose. In this, the sample should be drawn. The unit refers to the individual members due to which the data should be collected. And, the sample means the portion of the selection from where the data should be collected.
Therefore, the option a is correct.
learn more about population here: https://brainly.com/question/19203964
What is the difference between digital instruments and decimal scaled instruments to measure
Answer Digital measuring instruments are self-contained devices that automatically present the value of the measured quantity on a digital display. And Decimal Scaled Instruments: Record all digits that you can certainly determine from the scale markings and estimate one more digit. I hope this Helped I´m new to this.
Explanation:
Complete the following sentence.
Tim was recently released from his last job. He was very rigid and would not change a product design once he began a project. He is now working for a new engineering firm and has learned from his last mistake. He is willing to meet with clients to change the needs of each and every situation. As a result, his work is now______?
Answer:
improved
Explanation:
If you stand on one leg, the load exerted on the hip joint is 2.4 times your body weight. Assuming a simple cylindrical model for a hip implant, with a cross-sectional area of 5.6 cm2, estimate the following:
a) The corresponding stress on the hip implant in a 175-lb individual: ………………. [MPa] (0.2)
b) If the hip implant is made of Ti-6Al-4V (120 GPa elastic modulus), what is the strain for the current loading conditions? ………………. (0.1)
c) Complete solution (please show your work on a scrap paper, scan it, and insert the image below) (0.1)
Solution :
Given :
cross sectional area = 5.6 cm square
The corresponding stress
[tex]$\sigma = \frac{F}{A}$[/tex]
[tex]$=\frac{2.5 \times 175 \ lb\times (1 \ N/ 0.2248 \ lb)}{5.6 \ cm^2 (1 \ N/100 \ cm)^2}$[/tex]
[tex]$=\frac{1946.17}{0.056 \times 10^{-2}}$[/tex]
[tex]$= 3.475 \times 10^6 \ N/m^2$[/tex]
∴ [tex]$\sigma = 3.475 \ MPa$[/tex]
And the strain is
[tex]$\epsilon = \frac{\sigma}{E}$[/tex]
[tex]$=\frac{3.475}{124 \times 10^3}$[/tex]
[tex]$= 2.80 \times 10^{-5}$[/tex]
If Nick's average stride length is 2.7 feet, how many strides will it take him to walk to school?
Answer: how far is the school?
Explanation:
What role does the president play in developing the federal budget?
A. The president has control over all discretionary spending in the
budget.
B. The president either vetoes the budget and sends it back to
Congress or signs it into law.
C. The president determines which spending programs will be
mandatory.
D. The president decides whether to approve the House or the Senate
spending bill.
The role a president plays in developing the federal budget is: B. The president either vetoes the budget and sends it back to Congress or signs it into law.
What is a federal budget?A federal budget can be defined as a financial plan that is used by the government for the estimation of the revenue and expenditures of a country, especially for a specified period of time, which is often one year.
This ultimately implies that, federal budgets are usually compiled, analyzed and re-evaluated on periodic basis by the executive or federal government of a country.
Generally, the role of a president in developing the federal budget is to either veto the budget and sends it back to Congress or sign it into law.
Read more on budget here: https://brainly.com/question/13964173
Answer:
Explanation:
B. The president either vetoes the budget and sends it back to
Congress or signs it into law.
Earth completes one full ____ on its axis every 24 hours
Answer:
rotation
Explanation:
I just answered this!
1: A baseball is hit 4 feet above the ground leaves the bat with an initial speed of 98 ft/sec at an angle of 0 45 is caught by an outfielder at a height of 3 feet.
Answer:
299.36 feet
Explanation:
[tex]To \ find \ the \ distance \ of \ the \ ball \ from \ the \ home \ plate. \\ \\ From \ the \ given \ information:[/tex]
[tex]Height \ h = 4 \ ft[/tex]
[tex]Initial \ speed \ V_o = 98 \ ft/s ec[/tex]
[tex]The \ angle \ \theta = 45^0[/tex]
[tex]Acceleration \ due \ to \ gravity (g)= 32.2 \ ft/s[/tex]
[tex]U_x = V_o \ cos 45 = \dfrac{98}{\sqrt{2}}[/tex]
[tex]U_y = V_o \ sin 45 = \dfrac{98}{\sqrt{2}}[/tex]
So;
[tex]S_y = u_y t - \dfrac{1}{2}gt^2[/tex]
[tex]-1 =\dfrac{98}{\sqrt{2}}t - \dfrac{1}{2}*32*1.85t^2[/tex]
By solving:
[tex]t_1 = 4.32 \ sec[/tex]
Thus;
[tex]horizontal \ distance = U_x t[/tex]
[tex]= \dfrac{98}{\sqrt{2}}\times 4.32[/tex]
[tex]\mathbf{=299.36 \ feet}[/tex]
[tex]\mathbf{Thus \ , the \ distance \ from \ the \ home \ plate \ = \ 299.36 \ feet}[/tex]
A window‐mounted air‐conditioning unit (AC) removes energy by heat transfer from a room, and rejects energy by heat transfer to the outside air. At steady‐state, the AC cycle requires 0.434kW and has a coefficient of performance (COP) of 6.22. Determine the rate at which the energy is removed from the room air, in kW. If electricity is valued at $0.10/kw-hr, determine the cost of operating the unit for 24hrs.
Solution :
Given :
The power of the air‐conditioning (AC) unit is , W = 0.434 kW
The coefficient of performance or the COP of the air‐conditioning (AC) unit is given by = 6.22
Therefore he heat removed is given by , [tex]$Q_H = 6.22 \times 0.434$[/tex]
[tex]$Q_H = 2.7 \ kW $[/tex]
Now if the electricity is valued at 0.10 dollar per kW hour, then the operating cost of the air conditioning unit in 24 hours is given by = 0.10 x 2.7 x 24
= 6.48
Therefore the operating cost = $ 6.48 for 24 hours.
You have signed an employment agreement two years ago with Al-Handasah Construction Company stipulating your obligations for respecting confidentiality during at least 5 years. Few weeks ago, you have changed employer and work now for Mony Corporation where you proposed to use some industrial processes developed by your ex-employer Al-Handasah Construction. By doing this, what intellectual property you may have infringed?
Select one:
a. Patent
b. Trade secrets
c. Trademark
d. Copyright
Answer: Trade secrets
Explanation:
Patent is a license from the government that is given to a a firm for a period of time and this gives the firm the sole right to sell a particular product. Patent is normally given to firms when there's an innovation by the firm.
A trademark is an intellectual property and it consist of symbols, words, design or phrase which helps to differentiate one company from another company.
Copyright simply means the right that's given to an individual or firm to copy. It is the legal right that the owner of an intellectual property has. It is a crime when one copies the work of someone else without the approval from the owner of the work.
Trade secrets are the formula, recipe or process used by a company during production process which gives such company an edge over its competitors.
With regards to the definition above, the answer is a trade secret. This is because some industrial processes used by his former company are being exposed and told to the new company.
Many farms and ranches use electric fences to keep animals from getting into or out of specific pastures. When switched on, an electric current is produced in the fence. When an animal touches the electrified fence, it receives a small shock. What material would be the best choice for making an effective electric fence, and why?
Answer:
Aluminum
Explanation:
The best material to use when creating an electric fence would be Aluminum. Aluminum wiring is incredibly durable and can be easily obtained. Since aluminum is a non-magnetic metal its conducting capabilities far exceed other metallic options in the market and is also why companies choose aluminum for their high tension cable wiring. Aside from being more expensive than other feasible options its durability and conducting capabilities make it easily the best option.
Answer:
Steel Wires
Explanation:
International house of pancakes
After cutting a PVC pipe you should use a
to debure the pipe
Answer:
Deburring Tool
Explanation:
A deburring tool is used in order to debur the PVC pipes. They are mostly used for the plastic pipes.
After the PVC pipes are cut, there are burrs on the pipe surface. To remove these burrs, a deburring tool is used. It removes the burrs form the edges of the PVC pipes that results from grinding, cutting, milling, drilling, etc.
The deburring tools are made from high speed steels.
A pressure of elevation 4.8m on a tank containing oil read 34.7kpa.Another gauge at elevation 2.2m read 57 5kpa.Cumpute specific weight density and specific gravity of the liguid
Answer:
Explanation:
From the given information:
Pressure at the elevation 4.8 m = 34.7 kPa
Pressure at the elevation 2.2 m = 57.5 kPa
Recall that:
At the pressure of depth "h";
p = ρgh
where;
ρgh = 34.7 × 10 ³
ρ × 9.81 × h = 34.7 × 10³
ρh = 34.7 × 10³/9.81
ρh = 3.54 × 10³ ----- equation (1)
ρg(h + 4.8 - 2.2) = 57.5 × 10³
ρ × 9.81 × (h + 2.6) = 57.5 × 10³
ρ (h + 2.6) = 57.5 × 10³ / 9.81
ρ (h + 2.6) = 5.86 × 10³ ------ equation (2)
From equation (1) and (2);
The density of the oil ρ is determined to be = 0.8939 × 10³ kg/m³
≅ 893.9 kg/m³
The specific weight w = ρg
w = 0.8939 × 10³ × 9.81
w = 8769.159
w = 8.75 × 10³ kg/m²/s²
The specific gravity SG = [tex]\dfrac{\rho _{oil}}{\rho_{water}}[/tex]
= [tex]\dfrac{0.8939 \times 10^3}{10^3}[/tex]
= 0.8939
≅ 0.894