Read an integer from the user repeatedly, until the user enters a negative number. use for loop (C programming)​

Answers

Answer 1

Answer:

go on then

Explanation:


Related Questions

. What is wrought iron? Discuss in brief its chemical composition, properties and applications.​

Answers

Answer:

Wrought iron is an iron alloy with very low carbon content with respect to cast iron.

Explanation:

It is soft, ductile, magnetic, and has high elasticity and tensile strength. It can be heated and reheated and worked into various shapes.

Answer:

Wrought iron is an ferrous metal with a very low amount of carbon (less than 0.08%) compared to cast iron (2% or more). It is a semi-molten mass of iron with a fibrous sheath (up to 2% by weight), giving it a "grain" similar to wood grain, visible when bent or bent to the point of fracture. Wrought iron, malleable, easy to draw, corrosion resistant and easy to weld. Explanation:

The process of refining specification involves
O defining the initial design.
O presenting the finished product to a client.
deciding whether or not to continue with a project.
O adjusting outcomes and making pragmatic changes.

Answers

Answer:

I'm not sure but I'm pretty sure it the second one (btw I'm sorry if this didn't help) :/

A nut driver is a variation of a socket wrench, true?

Answers

Answer:

TRUE

Explanation:

Answer: True

Explanation: Nut drivers are sockets that can be snapped on or permanently fixed to a screwdriver-type handle.

As
is the rate (in time and distance) at which that force
is a twisting or turning force,
is produced
(
Select one:
O A. Torque; horsepower; torque
OB. Torque; horsepower; horsepower
O C. Horsepower; torque; horsepower
O D. Horsepower; torque; torque
Clear my choice

Answers

Answer:

C

Explanation:

As horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.

What is horsepower?

Horsepower is defined as a unit used to describe the pace at which labor is done or to quantify power, frequently in relation to the output of engines or motors. Standardization and types of horsepower vary widely. A car's engine power is measured in horsepower (hp); the greater the number, the more power is transferred to the wheels and, in theory, the faster it will travel.

To put it simply, horsepower is your overall speed and power, whereas torque allows you to feel the sensation of acceleration when you put your foot down. When you realize that horsepower is derived from torque, this makes sense. Torque is a unit of rotational or twisting force. The power an engine produces is referred to as horsepower.

Thus, as horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.  

To learn more about horsepower, refer to the link below:

https://brainly.com/question/12260337

#SPJ2

As an engineer you are responsible for selecting and procuring pump for your water distribution system. After some background study you selected and purchased an 1160 rpm Taco 4013 FI and CI series pumps with a 12.75 impeller diameter (for details see the ppt slides for the pump chapter). After procuring the pump you realize that you should have purchased a similar pump but with a 2000 rpm.

Required:
a. What will be your approach to handle this situation?
b. How would you prepare a performance curve at 2000 rpm?

Answers

In this picture there is answer…..

Twisting force is known as:
Select one:
A. thrust.
B. horsepower.
C. torque.
D. energy.

Answers

C Torque. Hope it helps

A positively charged electric has a charge of 2 Coulombs. If 12.5x10^18 free electrons are added to it, what will be the net charge on the said dielectric?

Answers

The net charge on the said dielectric is 0

1C = 6.25 * 10¹⁸ electrons; hence:

-12.5x10¹⁸ free electrons = (-12.5x10¹⁸ free electrons * (1C/ 6.25 * 10¹⁸ electrons))

-12.5x10¹⁸ free electrons = -2 C

A positively charged electric has a charge of 2 Coulombs, hence:

Q₁ = 2C

12.5x10¹⁸ free electrons are added to it, hence:

Q₂ = -2C

[tex]Net\ charge(Q_{net})=Q_1+Q_2=2C+(-2C)=0[/tex]

Hence the net charge on the said dielectric is 0

Find out more at: https://brainly.com/question/10464929

In the figure, particle 1 of mass m1 = 3.1 kg slides rightward along an x axis on a frictionless floor with a speed of 5.0 m/s. When it reaches x = 0, it undergoes a one-dimensional elastic collision with stationary particle 2 of mass m2 = 4.6 kg. When particle 2 then reaches a wall at xw = 79 cm, it bounces from the wall with no loss of speed. At what position on the x-axis does particle 2 then collide with particle 1?

Answers

Answer:

We use Eq 9−67 and 9−68 to find the velocities of the particles after their first collision (at x=0 and t=0 )

ν

1f

m

1

+m

2

m

1

+m

2

ν

1i

=

0.30kg+0.40kg

0.30kg−0.40kg

(2.0m/s)=−0.29m/s

ν

2f

=

m

1

+m

2

2m

1

ν

1i

=

0.30kg+0.40kg

2(0.30kg)

(2.0m/s)=1.7m/s .

At a rate of motion of 1.7m/s,2x

w

=140cm (the distance to the wall and back to x=0 ) will be traversed by particle 2 in 0.82s . At t=0.82s , particle 1 is located at

x=(−2/7)(0.82)=−23cm ,

and particle 2 is " gaining " at a rate of (10/7)m/s leftward ; this is their relative velocity at that time . Thus , this "gap" of 23cm between them will be closed after an additional time of (0.23m)/(10/7m/s)=0.16s has passed . At this time (t=0.82+0.16=0.98s) the two particles are at x=(−2/7)(0.98)=−28cm

Explanation:


Which of the following is a Dashboard Scoreboard for alignment of the business where information is constantly flowing through the Tiers so immediate actions can be taken?

Answers

Answer:

What is a dashboard?

A dashboard is an information management tool used to track KPIs, metrics, and key data points that are relevant to your business, department, or a specific process. Dashboards aggregate and visualize data from multiple sources, such as databases, locally hosted files, and web services. Dashboards allow you to monitor your business performance by displaying historical trends, actionable data, and real-time information.

Dashboards actually take their name from automobile dashboards and they are used in much the same way. For the sake of an analogy, let’s look at a car. There may be hundreds of processes that impact the performance of your vehicle if you look under the hood. Your car’s dashboard summarizes this using visualizations so you can focus on what matters most: safely driving your vehicle.

For businesses, there are hundreds of processes that impact your performance if you look ‘under the hood’, so to speak. And with a wealth of data made available these days, managing and extracting value from it can be difficult. Simplifying data analysis and distribution through tools like dashboards is a way to help businesses rev their engines and make smarter, better, faster data-driven decisions.

And a well designed dashboard levels up your approach to information management. Everyone in the business, regardless of role, has questions about your company performance, whether it be campaign performance, new wins, or churn rate. Dashboards bring everyone (and your metrics) together in one place to answer these questions.

Explanation:

List the crops that can be used dibbler .

Answers

Answer:

A dibber or dibble or dibbler

Explanation:

A dibber or dibble or dibbler is a pointed wooden stick for making holes in the ground so that seeds, seedlings or small bulbs can be planted. Dibbers come in a variety of designs including the straight dibber, T-handled dibber, trowel dibber, and L-shaped dibber

Discuss on forced convection heat transfer with real examples.

Answers

Answer:

forced convection

Explanation:

When a fan, pump or suction device is used to facilitate convection, the result is forced convection. Everyday examples of this can be seen with air conditioning, central heating, a car radiator using fluid, or a convection oven.

Why does a
generally decrease
with increasing
bond energy?

Answers

Answer:

What is the real meaning of this questions

Answer:

what whatwhat whatwhat the town hall meeting at the office in the morning and I can get you a new one for the kids

Technician A states that about 33% of the heat energy created is wasted by being dumped straight out
of the exhaust to the atmosphere. Technician B states that 33% is wasted by internal friction and from
radiating off hot engine components straight to the atmosphere. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither Anor B

Answers

Heat energy is the known to be a product of the movement of tiny particles called atoms, molecules or ions. The true statement is by Technician A.

Internal combustion engine is dependent on the heat of combustion so as to make torque to move the vehicle and power the system.

A lot of heat made during combustion is not often used productively and therefore need to be removed to avoid overheating of the engine.

The heat energy that is not used for is wasted in three ways: They are:

About 33% is wasted by being dumped straight out of the exhaust to the atmosphere. About 33% is wasted by the cooling system, which prevents overheating of the engine components. About 5% is wasted by internal friction and from radiating off of hot engine components straight to the atmosphere.

Learn more from

https://brainly.com/question/14566159

binary classification algorithm

Answers

Answer:

What is this exactly?

Explanation:

If your asking for the definition, binary classification is the task of classifying the elements of a set into two groups on the basis of a classification rule.

Warning danger ahead sign

Answers

Answer: okiiiii

Explanation:

Answer

Ok

Explanation


How is a scale model different from other types of models?
It is made with clay.
It includes many engineers' ideas.
It maintains correct spatial relations.
It is the last type of godel created in the design process

Answers

Answer:

A scale model is a representation or copy of an object that is larger or smaller than the actual size of the object being represented. Very often the scale model is smaller than the original and used as a guide to making the object in full size.

Explanation:

Answer:

C.) It maintains correct spatial relations

Explanation:

Ong that's the answer

type the correct answer in the box Spell all words correctly
Damien wants to study the effect on a material's elasticity after it is submerged in water for varying durations. What type of graphical tool should
holin
Damien can stucty how the material behaves when immersed by using a
Curve

Answers

Damien can study how the material behaves when immersed by using a; Stress - Strain Curve

To determine the elasticity of a material, we need to find the elastic modulus because the elastic modulus is what quantifies the elasticity of the material.

Now, formula for elastic modulus is;

E = stress/strain

Now, to study the effect on a material's elasticity after it is submerged in water for varying durations, since elasticity is based on the stress and strain on the material, we need to draw a graph of stress vs strain which is also called a stress - strain curve.

The stress strain curve is a graphical tool that helps us know to know the amount of load a material can take before it will stretch and break.

Read more about stress - strain curves at; https://brainly.com/question/22394570

Determine the location of the maximum bending moment. In the formula, w is the rate of load increase in lb ft and l is the length (in ft) of the beam. calculus

Answers

https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/

State Conditions necessary for static equilibrium of a particle of a rigid body​

Answers

Answer:

Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.

Hi there!

For a particle to be in static equilibrium:

[tex]\huge\boxed{\Sigma \tau = 0}}[/tex]

The sum of torques acting on the particle must equal 0 Nm.

[tex]\huge\boxed{\Sigma F = 0}}[/tex]

The sum of forces acting on the particle must equal 0 N.

Both of these conditions MUST be met in order for a particle to be in STATIC equilibrium.

pretty ako hjshjs ok.

Answers

Answer:

wala naman pong pic po wala kahit walang pic magan da parin

Twisting force is known as: A. thrust.
B. horsepower.
C. torque.
D. energy

Answers

C. Torque. Hope this helps!!!!!!!!

Differentiate between strain hardening exponent and strain rate sensitivity ​

Answers

Whaaaaaaaaaaaaaaaaaaaaaaaaaaatttttttttttttttttttttt

variable head permeability ?

Answers

Answer:

The variable head permeability test is one of various methods for determining soil permeability. It is used to determine the permeability of relatively new soil. Permeability refers to a soil's ability to enable water to pass through its pores or spaces.

Explanation:

Twisting force is known as:
Select one:
A. thrust.
B. horsepower.
C. torque.
D. energy.

Answers

The correct answer is C. Torque

A cylindrical work part has a diameter and a height of both as 6cm. The coefficient of friction at the die work interface is 0.10. The work metal has a strength coefficient of 270MPa, yield strength of 110MPa, and a strain hardening exponent of 0.15. Determine the instantaneous force in N at a height of 4cm

Answers

the answer to this question: 4.50

what is Agriculture and Environmental Engineering ​

Answers

Answer:

Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.

Engineer It A water heater is a tank in which cold water is heated. Cold water flows into the tank to keep it full. A heating element warms the water inside the tank. The heated water can then be sent to hot water faucets in a building. Assume that a water heater design requires the hottest water possible to be sent to hot water faucets in a building. Where would be the best place for the hot water outlet pipe to be attached to the tank: the top, the middle, or the bottom of the tank? Explain your answer.

Answers

Answer:

i think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top

Explanation:

I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.

What is Heater?

The process of transforming electrical current into heat energy is known as electric heating. An electrical resistor serves as the heating element in an electric heater, and heat is generated there when an electric current flows through it.

This procedure is frequently utilized in a wide range of domestic applications. from using an electric burner to prepare food, a kettle to boil water, and of course, house heating.

With one significant exception—they don't rely on a boiler and a system of pipes to produce the heat—electric heaters and radiators function exactly like your central heating radiators that are plumbed in.

Therefore, I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.

To learn more about Heating, refer to the link:

https://brainly.com/question/1429452

#SPJ2

Which of the following classes of biomaterials would be most appropriate for fabricating an artificial tendon, a tissue that must sustain substantial deformation at low forces and quickly regain its original dimensions after stress release? Why ?

(a) Metals
(b) Ceramics
(c) Polymers

Answers

B is the correct answer
B. Is the right answer hope this help

How does science and technology address the problems of the society?

Answers

Answer:

By ads online video (sorry if this doesn't help

Answer:

Through science and technology, we have solved many of humanity's problems, including hunger (at least in the Western world) with farming technologies and curing diseases through medical technologies. Inventions such as dishwashers, washing machines, and artificial lights have saved us immense amounts of time.

Explanation:

Science can not solve all of our problems. While scientific understanding can help battle things like disease, hunger, and poverty when applied properly, it does not do so completely and automatically. Furthermore, there are many areas of life where science can have little impact.

A live load on a house includes the
A.Weight of snow or rain
B.Furnishings
C.Pressure of the earth against the foundation
D.Built-in cabinets

Answers

Answer:

D

Explanation:

Other Questions
Miranda purchased 425 shares of Dagofi Radar stock at $14. 15 apiece. She earns $374. 00 in dividends every year. What is the yield on Mirandas Dagofi Radar stock? a. 0. 0622 b. 6. 22 c. 26. 4 d. 0. 264. WILL MARK BRAINLIESTRead the story Lost in the Woods:I never thought departing the trail just a little would be a big deal. My parents had cautioned me so many times about wandering off and how easy it is to get disoriented. But, I wasn't planning to go very far. In fact, I kept looking back to make sure I could retrace my steps. Looking back didn't work. All of the trees began to look the same, and nothing looked familiar. It wasn't until I finally decided to make my way back that I realized I was lost! I had gone much farther, and for much longer, than I had planned.The warmth that the sun had brought to the forest in the daytime was now quickly disappearing. My parents' warnings came racing through my head. What did they tell me to do if ever I got lost? Over and over they drilled into me, "The most important thing to remember is S.T.O.P.!" It's an acronym for sit, think, observe, and plan. I stopped, sat down on the forest floor, and pulled my knees in close. It was cooling off, and a light drizzle was dampening the forest. I was lonely and scared. I knew that to survive, I had to stay warm, and I needed to drink water. Before I got any wetter, I made a very crude lean-to from the nearby branches and foliage. I managed to collect a bunch of dry leaves for a mattress. It was dark now. I took off my T-shirt and wrapped it around my legs, pulled on my hoodie, and curled up on the bed of leaves. I couldn't sleep. It was a cold, dark, and spooky night, and I was hungry.It felt like forever before the dawn filtered through the trees the next day. I knew I had to remain calm and make my whereabouts known. My family would be searching for me. I pulled out the only tool I had brought with me, my voice! I began to yell as loudly as I could,"Help! I'm over here!"Soon, very faintly at first, I could hear voices. I knew it was the search party, so I kept yelling and then listening. They kept calling out my name, and I kept replying until we were together. My dad was holding me close when he reprimanded me,"Don't you know you were late for supper? I'm disappointed that you wandered off. I'm glad you told us where you were going, and I'm proud of you for remembering the survival techniques. But, I bet you won't do that again, eh?""Nah, I think I learned my lesson," I answered sheepishly.Read the story The Rescue:Captain Henry was said to be one of the best divers in Bayfield, Wisconsin, and now he is said to be the best ship captain. However, this evening on Lake Superior was different from any other evening that Captain Henry had seen. It was a wavy and stormy night on the lake. Captain Henry was directing all of his strength to hold the steering wheel and control the ship. The waves were the size of mammoths, and the boat continued to fill with angry water. Captain Henry yelled at his fellow sailors to scoop out the water that was weighing down the ship, but the sailors could not work any faster. "We are sinking! We are sinking!" shouted the sailors.Captain Henry knew that they were in trouble. With little time to spare before the ship began to sink into Lake Superior, Captain Henry made an urgent call to his older brother. His older brother had helped him with everything from cuts to broken bones all of his life. He was a father figure to Captain Henry. Coincidently, his older brother was also the strongest, bravest, and most dedicated coastguard in Bayfield, Wisconsin. Luckily, with Lake Superior just north of Bayfield, Captain Henry's brother would hopefully be able to rescue them soon. Captain Henry began to desperately flash the emergency lights on the boat so that his brother could find him. In the distance, the sailors pointed to a boat coming their way and tooting its horn. As Captain Henry's brother arrived, he threw a rope to the sailors and pulled them to safety. Standing on the boat, wrapped in blankets, the sailors, Captain Henry, and his brother watched the ship sink. "All good things must come to an end," stated Captain Henry, sadly. "But, hey! Now, you can practice your diving again and go see your ship at the bottom of the lake," joked Captain Henry's brother.In both texts, the characters find a solution to survive a perilous situation. Lost in the Woods tells of a child who uses the skills they had been taught while waiting to be found in the woods. How is the solution Captain Henry uses to get out of his perilous situation different in the text, The Rescue? Captain Henry must call for immediate help and abandon his sinking ship. Captain Henry must use the blankets on his brother's ship to stay warm. Captain Henry leaves his boat in the water to go diving. Captain Henry scoops the water out of the boat and sails away. Determine the measure of angle ABD.a) 48b) 12c) 90d) 24 A recent tornado damaged Jack's house and left it a little distorted. A question on the insurance form asked, "What shape is the house in?" Jack replied, "An irregular convex pentagon. The sum of the measures of the Interior angles of the 5-sided house is 540 find the Value x When choosing a topic for your research assignment, think of something that might be of interest to you and youraudience. First, write down your chosen topic. Then, to ensure that your topic isn't too broad, list three to fourinformal questions about your topic. These questions should help narrow down the focus of your topic. Finally, writedown your revised topic after you have narrowed it down. rich, publish suffix and prefix d=(x2x1)2+(y2y1)2Evaluate d if (x1,y1)=(2,4) and (x2,y2)=(4,3).Leave your answer in surd form. what is the meaning of gender stereotyping? Determine whether the relation, {(-8, -6), (-5, 2), (-8, 1), (7, 3)}, is a function and justify your answer. Noah and his friends are going to an amusement park. The total cost of admission for 8 students is $100, and all students share the cost equally. Noah brought $13 for his ticket. Did he bring enough money to get into the park? 1. Yes, and he will have .75 left over.2. No, he is .50 short.3. No, he is .75 short.4. Yes, and he will have .50 left over. Julius Caesar what important skills did he have that helped him achieve his goal Ali and Ben have a total of 36 CDs. After Ali gives Ben 40% of her CDs, Ben has twice as many as Ali. How many CDs did Ali have originally? PLEASE HELP!!!What is the shape of the poem called On Monsieurs Departure?End stopped lines, Run on lines, Stanza, OR Verse Paragraph?THANK YOU IN ADVANCE 16+165+7+7+7+7+7+7+7+7+7+7+7+7 how many feet of intestines does the average person have Which piece of information in the text is LEAST relevant? A. The system was based on earlier work that the researchers used related to the flu and the influences of lifestyle choices on peoples health. B. Public health officials could spend their limited time and money inspecting restaurants that are most likely to be problematic. C. If a person's tweets show they are suffering from a foodborne illness, the system then traces back their steps to find the restaurant most likely to be the source. D. Over four months, the researchers examined 3.8 million tweets from 94,000 people living in New York City. Which graph does NOT represent a function? HELP pleaseeeeeeeeee Disability rates have declined over the years for all age groups except this one. which theory best explains the occurrence of afterimages