Answer: There are [tex]10.5\times 10^{23}[/tex] formula units in 1.75 mol sample of NaCl.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
1 mole of NaCl contains = [tex]6.023\times 10^{23}[/tex] formula units
Thus 1.75 mol of NaCl contains = [tex]\frac{6.023\times 10^{23}}{1}\times 1.75=10.5\times 10^{23}[/tex] formula units
Thus there are [tex]10.5\times 10^{23}[/tex] formula units in 1.75 mol sample of NaCl.
what is the empirical formula 63.0 g Rb and 5.90 g O.
Answer:
Explanation:
1st convert given data into % per 100wt...
Total system mass = 63.0g + 5.90g = 68.9g
%Rb = 63.0g/68.9g x 100% = 91.4% per 100wt
%O = 5.9g / 68.9g x 100% = 8.6%
Then follow the following sequence of calculations...
% => grams => moles => mole ratio => reduce to smallest whole no ratio => empirical ratio => empirical formula
%Rb = 91.4% => 91.4g/ 85.5g·mol⁻¹ =>1.069mole
%O = 8.6% => 8.6g/16g·mol⁻¹ => 0.5375mole
Rb:O => 1.069 : 0.5375
Reduce by dividing by the smaller mole value
1.069/0.5375 : 0.5375/0.5375 => 2 : 1 <=> empirical ratio
∴ Empirical Formula => Rb₂O
The level of CO2 in the blood is detected by chemoreceptors located in the aortic arch
and carotid arteries. These send impulses to either the cardioaccelerator or
cardioinhibitor center in the hypothalamus of the brain, which in turn sends an
impulse to the pacemaker of the heart to increase or decrease heart rate. Draw a
feedback diagram to illustrate what happens to restore homeostasis when blood CO2
rises.
Answer:
The level of CO2 in the blood is detected by chemoreceptors located in the aortic arch
and carotid arteries. These send impulses to either the cardioaccelerator or
cardioinhibitor center in the hypothalamus of the brain, which in turn sends an
impulse to the pacemaker of the heart to increase or decrease heart rate. Draw a
feedback diagram to illustrate what happens to restore homeostasis when blood CO2
rises.
Explanation:
The level of CO2 in the blood is detected by chemoreceptors located in the aortic arch
and carotid arteries. These send impulses to either the cardioaccelerator or
cardioinhibitor center in the hypothalamus of the brain, which in turn sends an
impulse to the pacemaker of the heart to increase or decrease heart rate. Draw a
feedback diagram to illustrate what happens to restore homeostasis when blood CO2
rises.
Help Please with this
What is the product(s) of the reaction below?
2Al(s) + Fe2O3(s) ---> Al2O3(s) + 2Fe(s)
A. Solid aluminum oxide and solid iron
B. Solid aluminum
C. Saturated aluminum oxide and saturated iron
D. Iron(III) oxide and aluminum oxide
Answer:
A. Solid aluminum oxide and solid iron
Explanation:
The reaction equation is given as:
2Al + Fe₂O₃ → Al₂O₃ + 2Fe
The species on the left hand side are the reactants
Those on the right hand side of the expression are the products.
The products are:
Al₂O₃ and Fe
These are solid aluminum oxide and solid iron
Can someone help me plz!!!
Calculate the mass, in grams, of 2 moles of CaCl2.
Answer:
222.2 grams of CaCl2 in 2 moles
Explanation:
Mole=given mass/gram mass formula
2moles=x/Gram Mass Formula
(Gram Mass Formula of CaCl2):
Ca=40.1
Cl= 35.5 x 2= 71
-----------------------
GFM=111.1
2 moles = x/111.1 g
x=222.2
What is the mass in grams of 0.40 moles of sodium borohydrate NaBH4
Answer:
Mass = 15.12 g
Explanation:
Given data:
Mass of sodium borohydride = ?
Number of moles of sodium borohydride =0.40 mol
Solution:
Formula:
Mass = number of moles / molar mass
Molar mass of sodium borohydride = 37.8 g/mol
By putting values,
Mass = 0.40 mol × 37.8 g/mol
Mass = 15.12 g
mass = 325.2 volume = 62.5 cm what's the density ?
Answer:
159571 lb or cubic feet
Explanation:
8SnCl4
How many atoms
Answer:
i think i like 14 or 8 atom
Explanation:
describe the relationship between potential and kinetic energy
We know potential energy is position relative, and kinetic energy is motion relative. The primary relationship between the two is their ability to transform into each other. In other words, potential energy transforms into kinetic energy, and kinetic energy converts into potential energy, and then back again.
Which of the following explains the VSEPR geometry of a carbon tetrachloride molecule? (5 points)
It is bent because there are four bonded pairs around carbon.
It is tetrahedral because there are four bonded pairs around carbon.
It is bent because there are two bonded pairs and two lone pairs around carbon.
It is tetrahedral because there are two bonded pairs and two lone pairs around carbon.
Answer:
(B) It is tetrahedral because there are four bonded pairs around carbon
Explanation:
CCl4 means four chloride ions bonded covalently with single carbon.
its coordination figure is:
CF = 1/2(Vallence of central atom + electrons donated from substituents - charge)
CF = 1/2(4 + 4.1 - 0)
CF = 4
Bond electrons = 4
Lone pair electrons = 0
Hence, CCl4 is tetrahedral
what is the mass in grams of a sample of 7.3 x 10^23 molecules of (iodine heptafluoride) IF7
320 g IF₇
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
7.3 × 10²³ molecules IF₇
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of I - 126.90 g/mol
Molar Mass of F - 19.00 g/mol
Molar Mass of IF₇ - 126.90 + 7(19.00) = 259.9 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 7.3 \cdot 10^{23} \ molecules \ IF_7(\frac{1 \ mol \ IF_7}{6.022 \cdot 10^{23} \ molecules \ IF_7})(\frac{259.9 \ g \ IF_7}{1 \ mol \ IF_7})[/tex]Multiply/Divide: [tex]\displaystyle 315.056 \ g \ IF_7[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
315.056 g IF₇ ≈ 320 g IF₇
Help asap, A student produced this results table to show the reactivity of the halogens. Explain what the results show.
Explanation:
The results shows the reactivity of the halogens and how they displace one another from any solution of their compounds.
The oxidizing power of the halogens decreases from top to down on the group. This explains why the more powerful oxidizing halogens displaces the less powerful one from simple salts.
We see that chlorine is able to displace Bromine and iodine
Bromine is only able to displace Iodine
Iodine cannot displace bromine or chlorine
whats the unit for mass
Answer:
The unit for mass is the kilogram (Kg).
Explanation:
Hope this helped!! <3 good luckk!!
Convert 7.89 x 10^8 molecules of water to liters.
Help I have hw due and I don’t understand this question
Answer:
2.94 x 10⁻¹⁴L
Explanation:
To solve this problem, we have to assume that the condition of this water is at standard temperature and pressure, STP.
At STP;
1 mole of gas have a volume of 22.4L
So, let us find the number of moles of this water first;
6.02 x 10²³ molecules can be found in 1 mole of a substance
7.89 x 10⁸ molecules will contain [tex]\frac{7.89 x 10^{8} }{6.02 x 10^{23} }[/tex] = 1.31 x 10⁻¹⁵mole of water
So;
Volume of water = 22.4 x 1.31 x 10⁻¹⁵ = 2.94 x 10⁻¹⁴L
When the vapor pressure of a liquid is equal to the atmospheric pressure, the liquid _____
O has no observable changes
O boils vigorously
O begins to boil
O evaporates
Answer:
O begins to boil
Explanation:
When the vapor pressure of a liquid is equal to the atmospheric pressure, the liquid suddenly begins to boil.
At this point the boiling point of the liquid has been reached. Further addition of heat energy will cause the liquid to boil vigorously Subsequently evaporation will start from the surface of the boiling liquid.The atmospheric pressure is the ambient pressure measured with the respect to the sea level pressure.Answer:
has no observable changes
Explanation:
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
When a substance has large or strongly-attracted particles, they do not flow freely. For example, water flows very quickly compared to honey. Which property of liquids does this example illustrate?
Answer:
Viscosity
Explanation:
Viscosity is how thick a liquid is due to internal friction.
Types of osmosis...in 50 words
Osmosis is of two types:
Endosmosis– When a substance is placed in a hypotonic solution, the solvent molecules move inside the cell and the cell becomes turgid or undergoes deplasmolysis. This is known as endosmosis.
Exosmosis– When a substance is placed in a hypertonic solution, the solvent molecules move outside the cell and the cell becomes flaccid or undergoes plasmolysis. This is known as exosmosis.
There are some variations or types of osmosis on the basis of the direction of the movement of solvent molecules.
Reverse osmosis is a method of separation that is used to force a solvent through a semi-permeable membrane resulting in solute molecules on one side and solvent molecules on the other side.Reverse osmosis is different than the forward osmosis in that reverse osmosis utilized hydraulic pressure to force the solvent against the osmotic pressure.Forward osmosis is another variation of osmosis where the osmotic pressure gradient is used to induce the flow of water from the sample solution to separate the solutes.Forward osmosis uses a draw solution with a higher concentration of solute, which extracts the solvent molecules from the sample solution; thus, resulting in the separation of solute and solvent in the sample solution.Endosmosis is the movement of water into the cell which occurs when a cell is placed in a solution having a higher concentration of water than the cell.Exosmosis is the movement of water out of the cell which occurs when a cell is placed in a solution having a higher concentration of solute than the cell.Please help outttt:(
Explanation:
1)
2Fe+3Cl2 →2FeCl3
2)
CH4+2O2 → CO2 +2H2O
3)
SnO2+2H2 →2H2O +Sn
4)
2KOH + H2SO4 → K2SO4+2H2O
Why do you think the moon looks different in these two images ?
Image 1 shows that the sun is travelling from the left while image 2 shows that the sun is travelling from the right.
What does the image show?We know that the solar system is composed of the sun and the planets. The planets move round the sun in concentric circles and the sun is the focus. This is the heliocentric model of the solar system.
The moon is also a part of the celestial bodies and the light from the moon is dependent on the direction of the movement of the sun. We have to recall that the moon is a non luminous object.
Learn more about the moon:https://brainly.com/question/13538936
#SPJ1
Cu(NO3)2 is what compound?
Answer:
the compound's name is copper nitrate
A wave in which particles of matter vibrate at right angles to the direction
the wave travels is called a(n) wave.
Enter the answer
Check It
Answer:
it will transverse wave I think it will help you
What would be the answer for these?
1. 4
2. 4
3. 2
4. 2
Further explanationGiven
Reaction
2H₂+O₂⇒2H₂O
Required
Number of atoms
Solution
In compounds, the number of atoms of the constituent components in the form of elements is usually indicated by a subscript after the element symbol, while the number in front of the compound which is the coefficient indicates the number of molecules of the compound.
In chemical reactions, the reactants are on the left and the products on the right
1. Number of Hydrogen in reactants
2 molecules x 2 atoms = 4 atoms
2. Number of Hydrogen in products
2 molecules x 2 atoms = 4 atoms
3. Number of Oxygen in reactants
1 molecules x 2 atoms = 2 atoms
3. Number of Oxygen in products
2 molecules x 1 atoms = 2 atoms
The reaction is said to be balanced because the number of atoms of the element is the same between the reactants and products
Pls help me use the graph to answer the questions
Answer:
The first question is option 2
and the second question in option 1
Explanation:
Lidia sets an empty metal pot on a hot stove burner. Which diagram best shows how heat from the burner will flow through the metal of the pot?
Answer:
The pan on the bottom right with the arrows pointing up.
Explanation:
conduction is the transfer of heat through touching surfaces, so when you place the pan on a hot stove, the heat heats up the bottom of the pan, and then the water in it.
The transfer of energy between systems through work is the expansion of gas in a steam engine. Therefore, the second diagram in the second row shows the correct direction of flow of heat.
What is energy transfer in thermodynamics?
Energy transfer is a phenomenon in which energy transfer from one matter to another matter. Energy can be transferred in two forms that are by doing work or by transferring heat.
Heat can be transferred by three ways conduction, convention and radiation. In conduction, when two object are in direct contact, transfer of molecules takes place. When heat flow through touching surfaces is called conduction. Heat flows in the upward direction from bottom in a pan.
Therefore, the second diagram in the second row shows the correct direction of flow of heat.
Learn more about energy transfer, here:
https://brainly.com/question/18649915
#SPJ6
What is the molar mass of carbon (C)?
The molar mass of carbon (C) is 12.0107 u.
Answer:
Explanation:
The answer is 12.0107 u
Hope it helped you.
Plz mark me brainliest.
Which substance has a melting point greater than room temperature
O A. argon
O B. oxygen
O
C. mercury
O D. aluminum
Aluminum is solid at room temperature and will, therefore, have a melting point that is above room temperature.
Melting pointThe room temperature is about 25 degrees Celsius.
Argon and oxygen are gases at room temperature.
Mercury is a liquid at room temperature.
Aluminum, on the other hand, is solid at room temperature. Hence, its melting point is definitely somewhere above room temperature.
More on melting points can be found here: https://brainly.com/question/25777663
Which element has the following complete electron configuration : 1s22s22p63s23p64s23d5?
Answer:
Manganese
Explanation:
The electronic configuration of the atom is:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁵
The powers in this configuration is the number of electrons in each orbital:
2 + 2 + 6 + 2 + 6 + 2 + 5 = 25
The compound has 25 electrons and it is Manganese
The electron configuration 1s22s22p63s23p64s23d5 corresponds to the element manganese (Mn).
In the electron configuration provided:
1s2 represents the filling of the 1s subshell with two electrons.
2s2 represents the filling of the 2s subshell with two electrons.
2p6 represents the filling of the 2p subshell with six electrons.
3s2 represents the filling of the 3s subshell with two electrons.
3p6 represents the filling of the 3p subshell with six electrons.
4s2 represents the filling of the 4s subshell with two electrons.
3d5 represents the filling of the 3d subshell with five electrons.
Based on this electron configuration, we can correctly identify the element as manganese (Mn), which has an atomic number of 25.
Know more about electron configuration:
https://brainly.com/question/29157546
#SPJ6
Help me (number 5).
Answer:
a. HF
Explanation:
Heat is transferred in all but which way.
Select one:
a. convection
b. sublimation
c. conduction
d. radiation
Btw I know it’s science but chem was closest thing to that