Answer:
See explanation
Explanation:
When the temperature was increased, the pressure of the gas in the can was increased.
When Maria removed the can and placed it in cold liquid, the decrease in temperature led to a corresponding decrease in pressure of the gas inside the can hence the can was crushed.
Hypothesis: The pressure of the gas in the can is directly proportional to temperature.
Maria was careless about the experiment. She ought to have first checked whether the hot plate was off before placing the soda can. Secondly,she should not have immediately plunged the soda can into liquid because it will shrink due to decrease in pressure. She should not also have removed the soda can with bare hands to avoid getting burns and blisters.
1) Why does polysubstitution frequently occur with Friedel-Crafts alkylation but not with Friedel-Crafts acylation?2) If Benzene is reacted with t-butyl chloride, why is the chief disubstituted product the para rather than ortho isomer?
Answer:
See explanation
Explanation:
Friedel-Crafts alkylation frequently undergo polysubstitution because the process leads to the addition of an electron donating alkyl group, which activates the benzene ring to further alkylation. The acyl group rather deactivates the ring towards electrophilic substitution.
When benzene is reacted with t-butyl chloride, the chief disubstituted product is the para rather than ortho isomer because the increased bulk of the tert-butyl group hinders attack at the ortho-sites.
Can you guys answer question 4 on new substance for Chemistry tysm
The answer is a bevasue it then becomes a chemical compound
Answer:
a
Explanation:
this would result in a compound and compounds are chemical changes so i think im right....
Literally struggling with this concept.(problem set included below)
Find the volume of an object that has a density 0f 3.14g/mL and a mass of 87.3g
Answer:
The answer is 27.80 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass = 87.3 g
density = 3.14 g/mL
We have
[tex]volume = \frac{87.3}{3.14} \\ = 27.8025477...[/tex]
We have the final answer as
27.80 mLHope this helps you
What are the factors affecting your limitations? How about possibilities?
Explanation:
My physiological make-up that governs the attributes I have and my climate, i.e. the conditions I have, are the variables influencing my limits. Biological make-up also regulates my prospects when they depend on my attributes, i.e. my ability and my environment , i.e. the conditions under which I am. This has been shown by experiments on twins, that our limits and opportunities are controlled by both genetics and environment.
The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant . Suppose the osmotic pressure of a certain solution is measured to be at an absolute temperature of . Write an equation that will let you calculate the molarity of this solution. Your equation should contain only symbols. Be sure you define each symbol other than . Your equation: Definitions of your symbols:
Answer:
c = π / R × T
Explanation:
The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant R . Suppose the osmotic pressure of a certain solution is measured to be 22 atm at an absolute temperature of 353 K. Write an equation that will let you calculate the molarity c of this solution. Your equation should contain only symbols. Be sure you define each symbol other than R.
Step 1: Given data and definition of the symbols
Osmotic pressure (π): 2.2 atmMolarity of the solution (c): ?Ideal gas constant (R): 0.08206 atm.L/mol.KAbsolute temperature (T): 353 KStep 2: Write an equation that will let you calculate the molarity of this solution, in terms of symbols
The osmotic pressure is a colligative property that can be calculated using the following expression.
π = c × R × T
We can rearrange this expression to calculate the molarity of the solution.
c = π / R × T
A cell must work to maintain a stable internal environment. It is also important for the environment around the cell to be stable. What reasoning explains what happens when the concentration of water inside a cell is lower than the concentration of water outside the cell?
The cell loses nutrients.
The cell splits and creates two new cells.
The cell gains too many lipids and carbohydrates.
The cell either loses water and dries up or gains too much water and bursts.
(science 7th grade)
Answer: the last one
Explanation: if a cell has too little water, it will begin to function incorrectly, and if a cell has too much water it will burst.
Which statement describes the effect of sorting and recombining genes in sexual reproduction?
Group of answer choices
offspring receive only recessive genes
offspring receive only dominant genes
offspring receive the same set of genes
offspring receive a unique combination of genes
Does anyone know this?
Answer:
B
Explanation:
The entropy will increase as the ice melts. While in a solid state (ice) entropy is lower because the molecules are ordered and in a set position. As the ice melts the molecular have a larger area to roam. When going from a solid state to a liquid state, entropy rises. When going from a liquid state to a gaseous state, entropy rises.
What stress causes this type of fault to form? O compression O gravity O tension O shearing
Answer: It’s D
Explanation:
Cuz I said so
Answer: d. Shearing
Explanation:
The chemical bonding of two hydrogen atoms and one oxygen atom forms water. Water is
an atom
an element
a compound
a neutron
Answer:
Atom
Explanation:
Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom Atom AtomAtom Atom Atom
On the graph, indicate the distance that corresponds to the bond length of the N2 molecule by placing an X on the horizontal axis.
Answer:
Check the image in the file attached below.
Explanation:
The objective of this question is to use the diagram provided to indicate the distance that corresponds to the bond length of the N2 molecule by placing X on the horizontal axis.
The bond length shows the distance of the bonds between the nuclei of the bonded atoms between the N2 molecule and O2 molecule. From the diagram, we can see that the bond length of O2 shows a greater tendency over the N2 molecule and it also have higher potential energy than the N2 molecule.
The distance corresponding to the bond length of N₂ is indicated in the attached graph.
Bond length represents/shows the bond distance between the atoms that are chemically bonded in the molecule ( N₂ ) . The bond distance ( average distance ) is measured from the nucleus of one binding atom toward another.
The bond length determines how easy or difficulty atoms bonded in a molecule can be separated. i.e. the longer the bond length the easier it is to separate chemically bonded atoms in a molecule.
Hence we can conclude that the distance corresponding to the bond length of N₂ is indicated in the attached graph.
Learn more : https://brainly.com/question/15436137
The heat of vaporization for benzaldehyde is 48.8 kJ/mol, and its normal boiling point is 451.0 K. Use this information to determine benzaldehyde’s vapor pressure (in torr) at 53.5°C. Report your answer to three significant digits.
Answer:
[tex]p_2=5.17torr[/tex]
Explanation:
Hello.
In this case, by using the Clausius-Clapeyron Equation which allows us to relate the vapor pressure, temperature and heat of vaporization as shown below:
[tex]ln(\frac{p_1}{p_2} )=\frac{\Delta _vH}{R}(\frac{1}{T_2}-\frac{1}{T_1} )[/tex]
Whereas [tex]p_1[/tex] is 760 torr due to the normal conditions. In such a way, for computing the vapor pressure of benzaldehyde at 53.5 °C (326.65 K), we proceed as shown below:
[tex]\frac{p_1}{p_2} =exp[\frac{48800J/mol}{8.314\frac{J}{mol*K}}(\frac{1}{326.65K}-\frac{1}{451.0K} )]\\\\\frac{p_1}{p_2}=147.0[/tex]
Thus, the vapor pressure at the final T is:
[tex]p_2=\frac{p_1}{147.0}=\frac{760torr}{147.0}\\ \\p_2=5.17torr[/tex]
Best regards!
an area of high pressure occurs when
Answer:
A high-pressure area, high, or anticyclone, is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding environment. Winds within high-pressure areas flow outward from the higher pressure areas near their centers towards the lower pressure areas further from their centers.
Explanation:
What type of wave does not need matter to carry energy?
The answer is Electromagnetic
Answer:
Electromagnetic
Explanation:
Electromagnetic waves differ from mechanical waves in that they do not require a medium to propagate. This means that electromagnetic waves can travel not only through air and solid materials, but also through the vacuum of space.
Define dynamic equilibrium.
a) no reactants react no products are formed the rate of the forward reaction
b) is faster than the rate of the reverse reaction the rate of the reverse reaction
c) is faster than the rate of the forward reaction the rate of the forward reaction
d) equals the rate of the reverse reaction
Answer:
d) The rate of forward reaction equals the rate of the reverse reaction
Explanation:
A dynamic equilibrium is attained when the rate of forward reaction is the same as reverse reaction. It occurs majorly in a reversible reaction. Thus, no change occurs in the reaction.
The process can be control by the immediate removal of the product as it is formed. This ensure that the reaction stops when all reactants are used up.
Which of the following rock will form if it is broken into sediment then emulsified over a long period of time?
Sedimentary rock
Magma rock
Metamorphic rock
Igneous rock
How do balanced chemical equations thon the
conservation of mass?
They show that the atoms in the products
may be different than the readarts as long
as the mass does not change,
They show that the atoms in the products are
the same as in the reactants, but the number
of atoms must change,
They show that the number of atoms of each
element is the same in the products and
reactants
Answer:
They show that the number of atoms of each element is the same in the products and reactants
Explanation:
Balanced chemical equations show the conservation of mass in that the number of atoms of each element is the same in the products and reactants.
In balancing chemical equation, the idea is to conform with the law of conservation of mass. It states that "during a chemical reaction, atoms are neither created nor destroyed but they simply combine to form new products". In chemical reaction, the atoms are still the same but new compounds ensue. The atoms still maintain their number.Answer:
C (They show that the number of atoms of each element is the same in the products and reactants.)
For the next question: C (2H2(g) + O2(g) → 2H2O(g))
Explanation:
For Edge
Determine the pH of a 0.461 M C6H5CO2H M solution if the Ka of C6H5CO2H is 6.5 x 10-5. Determine the pH of a 0.461 M C6H5CO2H M solution if the Ka of C6H5CO2H is 6.5 x 10-5. 11.74 9.48 5.48 4.52 2.26
Answer:
the answer
Explanation:
the answer
The pH of the solution can be calculated using the Ka value and molarity of the acid. pH of the acid is obtained as 2.26.
What is pH?pH of a solution is the measure of acidity or basicity. Mathematically it is the negative logarithm of H+ ion concentration in the solution.
pH = - log [H+]
The constant Ka is called ionization constant of an acid. Acetic acid ionizes into equimolar concentrations of H+ and CH₃COO- ions. The Ka can be written as:
[tex]\rm K_{a} = \frac{[CH_{3}COO^{-}][H+]}{[CH_{3}COOH]}[/tex]
Where, [CH₃COO-] = [H+] Thus the expression becomes changed and from the values of Ka and molarity of the acid, H+ ion concentration can be calculated.
6.5 × 10⁻⁵ = [H+]² / [0.461 M]
[H+] = 0.0054.
Now, the pH can be calculated as follows:
pH = - log [0.0054]
= 2.26.
Therefore, the pH of the acidic solution is 2.26.
To find more on pH, refer here:
https://brainly.com/question/491373
#SPJ5
Object A has a mass of 12g and a volume of 8cm3. object B has a mass of 20g and a volume of 8cm3 . which object has a greater density and by how much
Answer:
Object B has a density of 2.5 g/cm³ which is greater than object A by 1 g/cm³
Explanation:
Since we know that the formula for density is d=m/v, we can divide each mass by its corresponding volume to find the densities
12/8=1.5
20/8=2.5
So we know that object B has a greater density than object A by 1 g/cm³ (gram per cubic centimeter). Also the standard unit for density is kilograms per cubic meter but I used gram per cubic centimeter since they were the given units. 1cm=100m, 1000g=1km
Now
Selec
BI
Toda
OOOOOO
How and why do ionic bonds form? Check all of the boxes that apply
lonic bonds form between metal atoms and other metal atoms.
Ionic bonds form between metal atoms and nonmetal atoms
The more electronegative atoms transfer one or more electrons to the less electronegative atom
The less electronegative atoms transfers one or more electrons to the more electronegative atom,
The metal atom forms a cation and the nonmetal atom forms an anion
The attraction between ions with the same charge forms an ionic bond,
The attraction between ions with an opposite charge forms an ionic bond.
BLO
I lo
DONE
Elo
Yous
Answer:
✔️Ionic bonds form between metal atoms and nonmetal atoms.
✔️The less electronegative atoms transfers one or more electrons to the more electronegative atom
✔️The metal atom forms a cation and the nonmetal atom forms an anion.
✔️The attraction between ions with an opposite charge forms an ionic bond.
Explanation:
Ionic bond refers to the bond formation which occurs when there is complete and permanent transfer of electrons from one metal atom to another non-metal atom. The metals, which are electropositive (less electronegative) loose their electrons while the non-metals, which are less electropositive (more electronegative) gain the electrons.
When the metal atom looses electrons, they form cations(become positively charged) while non-metal atom forms anions (become negatively charged). When the opposite charges attract each other, they form ionic bond.
Answer:
✔️ Ionic bonds form between metal atoms and nonmetal atoms.
✔️ The less electronegative atoms transfers one or more electrons to the more electronegative atom.
✔️ The metal atom forms a cation and the nonmetal atom forms an anion.
✔️ The attraction between ions with an opposite charge forms an ionic bond.
The idea that the earth is divided into a number of small plates that float on the mantle and slide,collide,and slip past each other. Law or Theories
Answer:
Theories
Explanation:
It is theories because it was a generalistee abstract or thinking generalising the principle of fact about Earth tectonic plates ,it was formulated and concluded as plate tectonic theories after many findings. The theories conclude that the Earth has an outer layer called lithosphere and lies overly a plastic layer called asthenosphere. The lithosphere is divided into several plates and they move close to each other where they diverge, converge or slip over one another.
What is the name???????
Answer:
Carbon Hydrogen
Explanation:
I believe it means carbon (C) to one atom of hydrogen (H).
In the reaction between lead(II) nitrate and sodium chloride, what, if any, are the spectator ions
Answer:
Explanation:
Spectator ions are ions in a solution/reaction that do not take part in a chemical reaction (hence are called "spectator" ions). They can be identified when they are found both in the reactant and product sides.
The reaction between lead(II) nitrate, Pb(NO₃)₂ and sodium chloride, NaCl is illustrated below
Pb(NO₃)₂ + 2NaCl ⇒ PbCl₂ + 2NaNO₃
According to solubility rules, all the compounds above (with the exception of PbCl₂) are all soluble and would dissociate when involved in a reaction.
Hence, the ionic equation based on the description above will be
Pb²⁺ + 2NO₃⁻ + 2Na⁺ + 2Cl⁻ ⇒ PbCl₂ + 2Na⁺ + 2NO₃⁻
From the above ionic equation, it can be noted that both 2NO₃⁻ and 2Na⁺ are found on both the reactant and product side and are hence the spectator ions.
Is Kool-Aid dissolved in water in element compound or mixture?
Answer:
mixture
Explanation:
Kool-Aid is a mixture of sugar, water, dye, and flavoring.
HELP HELP
why are more common bone fractures among senior citizens than among young people
Photosynthesis
Definition in youre own words? thank you<3
Answer:
the process of plants taking the sunlight and turning it into food for the plant.
Explanation:
Pls, Help ASAP with 30 points!!!
Describe the similarities and differences between the eruptions of
less gassy and more gassy magma.
Answer:
the difference is tyat eruptions of less gassy and more gassy is that the less gassy doesnt retain as much gas as the more gassy one and thus the eruption of the less gassy is less damage to the more gassy
Lamark goes to a bowling alley to test his belief that rolling a bowling ball slowly will result in knocking down more pins. He gently rolls his bowling ball towards the bowling pins lined up at the end of the lane. The bowling ball stops in the middle of the lane without striking the pins. Which statement below best explains what happened?
Answer:
The ball's kinetic energy is transforming to potential energy.
Explanation:
the ball is stopping resulting in potential energy
describe the structure and function of gamma rays
Answer:
A gamma ray is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves and gives off the highest photon energy. The energy spectrum of gamma rays can be used to identify the decaying radionuclides using gamma spectroscopy.
Explanation: