POR FAVOR AYUDENME A RESOLVER ESTO:

Halla el coeficiente de dilatación lineal de una varilla que a 10 grados centígrados mide 125 metros y cuya longitud a 85 grados centígrados es 125.20 m. ¿De qué material será?

Answer:

ij

Explanation:

Answer:

I = 1.666... amps

Explanation:

P = I*V or Power = Current * Voltage

(100 watts) = I * (60 Volts)

I = 1.666... amps

Answer:17: A wave can be defined as follows: It is important to realize that a wave is quite a different object than a particle. A baseball thrown though a window transfers energy from one point to another, but this involves the movement of a material object between two points.

Explanation:

18: In this way, we classify waves into electromagnetic and mechanical waves. The main difference between mechanical and electromagnetic waves is that electromagnetic waves do not require a medium to propagate whereas mechanical waves require a medium in order to propagate.

Answer:

74.88N

Explanation:

From the question,

F = ma................... Equation 1

Where F = force exerted on the ball, m = mass of the ball, a = acceleration

But,

v² = u²+2as.............. Equation 2

Where v = final velocity, u = initial velocity, s = distance.

Given: v = 12 m/s, u = 0 m/s (from rest), s = 5.0 m

Substitute into equation 2 and solve for a

12² = 0²+2×a×5

144 = 10a

10a = 144

a = 144/10

a = 14.4 m/s²

Also Given: m = 5.2 kg,

Substitute into equation 1

F = 5.2×14.4

F = 74.88 N

Hence the force exerted on the ball is 74.88 N

Answer:

Ferromagnetism is a kind of magnetism that is associated with iron, cobalt, nickel, and some alloys or compounds containing one or more of these elements. It also occurs in gadolinium and a few other rare-earth elements.

Explanation:

Hope this helped Mark BRAINLIEST!!!

Answer:

Velocity can be directly added or subtracted.

For example, if a boat has a velocity V in still water.

And now you put the boat in a river with a current that has a velocity V'

The total velocity of the boat in that river is just the addition of these two velocities.

Velocity in the river  = V + V'

Where the only tricky part is that the velocity is a vector, so you need to take in account the directions of each vector.

In this case, we have a plane with a maximum velocity of 160km, let's assume a direction for this velocity, let's say that is in the positive x-direction.

Then we can write the velocity in the vector form:

velocity  = (vel in x-axis, vel in y-axis)

The velocity of the plane can be written as:

v = (160km/h, 0)

Now we add a crosswind of 30km/h

crosswind means that it is perpendicular, then it acts on the y-axis.

Then the total velocity of the plane will be:

velocity = (160km/h, 0) + (0, 30km/h)

velocity = (160km/h, 30km/h)

Now you can compute the total velocity of the airplane as the module of that vector.

Remember that for a vector (x, y) the module is:

mod = √(x^2 + y^2)

Then the module of the velocity is:

v = √( (160km/h)^2 + (30km/h)^2) = 162.8 km/h

Answer:

Energy moves between the particle of the medium.

Explanation:

Answer:

The SI unit of time is second (s) and temperature is Kelvin (K)

Explanation:

hope it is helpful to you

Answer:

When atoms from different elements are joined together in groups, they form molecules. The atoms in molecules bind together chemically, which means that the atoms cannot be separated again by physical means, such as filtration. The molecule has different properties from the elements from which is was made.

Explanation:

Answer:

The type of bond is ionic bond also called electrovalent bond.

Explanation:

This ionic bond is formed through an electrostatic attraction between two oppositely charged atoms.

Hope this helps! :)

And also this question was already answered on Brainly if you wanna check it out.

Answer:

it goes up until we help it to but the moment we stop support it gets affected by gravity and goes back

Explanation:

Answer:

0.125 volts

Explanation:

The induced emf can be sufficient to stimulate neuronal activity.

One such device generates a magnetic field within the brain that rises from zero to 1.5 T in 120 ms.

We need to find the induced emf within a circle of tissue of radius 1.6 mm and that is perpendicular to the direction of the field. The formula for the induced emf is given by :

[tex]\epsilon=-\dfrac{d\phi}{dt}[/tex]

Where

[tex]\phi[/tex] is magnetic flux

So,

[tex]\epsilon=-\dfrac{d(BA)}{dt}\\\\=2\pi r\times \dfrac{dB}{dt}\\\\=2\pi \times 1.6\times 10^{-3}\times \dfrac{1.5-0}{120\times 10^{-3}}\\\\=0.125\ V[/tex]

So, the induced emf is equal to 0.125 volts.

Answer:

2

Explanation:

wave length is the distance between corresponding points of two consecutive waves

3. hertz

Answer:

The magnitude of the magnetic force acting on the conductor is 0.75 Newton

Explanation:

The parameters given in the question are;

The length of the straight segment of wire, L = 25 cm = 0.25 m

The current carried in the wire, I = 5 A

The orientation of the wire with the magnetic field = Perpendicular

The strength of the magnetic field in which the wire is located, B = 0.60 T

The magnetic force, 'F', is given by the following formula;

F = [tex]\underset{I}{\rightarrow }[/tex]·L×[tex]\underset{B}{\rightarrow }[/tex] = I·L·B·sin(θ)

Where;

[tex]\underset{I}{\rightarrow }[/tex] = The current flowing, I

L = The length of the wire

[tex]\underset{B}{\rightarrow }[/tex] = The magnetic field strength, B

θ = The angle of inclination of the conductor to the magnetic field

Where I = 5 A, L = 0.25 m, B = 0.60 T, and θ = 90°, we get;

F = 5 A × 0.25 m × 0.60 T × sin(90°) = 0.75 N

Therefore

The magnitude of the magnetic force, F = 0.75 N.

Answer:

  I = 1.8 N s,  it is directed towards the right  

Explanation:

For this exercise we use the relationship between momentum and moment

         I = Δp

         F t = p_f - p₀

in this case the initial velocity is v₀ = - 2,0 m / s and final velocity v_f = 10,0 m / s, we assume the positive right direction

          I = m (v_f - v₀)

let's calculate

         I = 0.150 (10.0 - (-2.0))

         I = 0.150 (10 + 2)

         I = 1.8 N s

as the impulse is positive it is directed towards the right

Answer:

Insulators is the correct answer

Explanation:

A few electrons make up the insulators, which allow for very little electrical current to flow. While the conductors are excellent electrical conductors. Rubber is a poor insulator compared to metal, which is a very good conductor.

The insulator is a material that consists of a few electrons and they permit very little flow of electrical current. While the conductors are very good conductors of electricity. Metal is a very good conductor while rubber is a poor insulator.

Hence the answer is conductors possess free electrons, while insulators have few free electrons

The conductor has thus been used for wiring purposes and can be effectively used made to use energy; The insulator is a poor absorber and thus are unable to transfer energy.

Learn more about insulators follow.

brainly.com/question/19755578

SPJ6

Answer:

Perpendicular ; Parallel

Solution :

Given :

Force, F = 500 N

Let [tex]$ \vec F = F_x\ \hat i + F_y\ \hat j$[/tex]

      [tex]$|\vec F|=\sqrt{F_x^2+F_y^2}$[/tex]

∴ [tex]$F_x=F \cos 60^\circ = 500 \ \cos 60^\circ = 250 \ N$[/tex]

  [tex]$F_y=-F \cos 30^\circ = -500 \ \cos 30^\circ = -433.01 \ N$[/tex]   (since [tex]$F_y$[/tex] direction is in negative y-axis)

[tex]$F=250 \ \hat i - 433.01 \ \hat j$[/tex]

So scalar components are : 250 N and 433.01 N

     vector components are : [tex]$250 \ \hat i$[/tex] and [tex]$-433.01\ \hat j$[/tex]

1.  Scalar components along :

 x' axis = 500 N, since the force is in this direction.

 [tex]$F_{x'}= F \ \cos \theta = 500\ \cos \theta$[/tex]

  Here, θ = 0° , since force and axis in the same direction.

So, cos θ = cos 0° = 1

∴ [tex]$F_{x'}=500 \times 1=500\ N$[/tex]

[tex]$F_{y'}= F \ \sin \theta = 500\ \sin 0^\circ=500 \times 0=0$[/tex]

[tex]$F_{y'}=F\ cos \theta$[/tex] but here θ is 90°. So the force ad axis are perpendicular to each other.

[tex]$F_{y'}=F\ \cos 90^\circ= 500 \ \cos 90^\circ = 500 \times 0=0$[/tex]

∴ [tex]$F_{x'}= 500\ N \text{ and}\ F_{y'}=0\ N$[/tex]

2. Scalar components of F along:

x-axis :

[tex]$F_x=F\ \cos \theta$[/tex],   here θ is the angle between x-axis and F = 60°.

[tex]$F_x=500 \times \cos60^\circ=250\ N$[/tex]

y'-axis :

[tex]$F_{y'}=F\ \cos \theta$[/tex],   here θ is the angle between y'-axis and F = 90°.

[tex]$F_{y'}=500 \times \cos90^\circ=500\times 0=0\ N$[/tex]

∴ [tex]$F_{x}= 250\ N \text{ and}\ F_{y'}=0\ N$[/tex]

Answer:

-17.5 nC

Explanation:

charge A = -30 nC

charge B = -5 nC

After adding them it would be the average of the two charges because of the getting same voltage difference. so

c = (-30+(-5)) / 2 nC

c= -17.5 nC

answer is -17.5 nC

Answer:

ΔP = - 1.2 Ns

Explanation:

The change in momentum of the hammer head can be given as follows:

[tex]\Delta P = P_f - P_i\\[/tex]

where,

ΔP = Change in Momentum = ?

Pf = Final Momentum

Pi - Initial Momentum

Therefore,

[tex]\Delta P = mv_f - mv_i\\\Delta P = m(v_f - v_i)[/tex]

where,

m = mass of hammer head = 0.15 kg

vf = final speed of hammer = 0 m/s

vi = initial speed of hammer = 8 m/s

Therefore,

[tex]\Delta P = (0.15\ kg)(0\ m/s-8\ m/s)[/tex]

ΔP = - 1.2 Ns

Answer:

Part A

The power to turn on the lamp, ∑P = 3.36 W

Part B

The Resistor required is approximately 8.04 Ohms

Part C

The time for all the lights to go out is approximately 21.43 hours

Explanation:

The input voltage of the motor battery , V = 12 V

The capacity of the battery, Q = 6 Ah

The number of lamps in parallel = 8 lamps

The maximum voltage of each lamp,  = 3 V

The electric current in each lamp = 140 mA

The energy available in a battery, E = Q × V

For the battery, we have;

E = 6 Ah × 12 V = 72 Wh

The energy available in a battery, E = 72 Wh

Part A

The power used by the lamps, [tex]P_i[/tex] = [tex]I_i[/tex] × [tex]V_i[/tex]

∴ The total power used by the lamp, ∑P = 8 × 0.14 A × 3 V = 3.36 W

The power to turn on the lamp, ∑P = 3.36 W

Part B

The resistance required, is given as follows;

Resistor required = (Battery voltage - Lamp voltage)/(The sum of bulb current)

∴ Resistor required = (12 V - 3 V)/(8 × 0.14 A)

The Resistor required = 8.03571429 Ohms

The Resistor required ≈ 8.04 Ohms

Part C

The time for all the lights to go out = The time for the lamps to use all the power available in the battery

The time for all the lights to go out, t = E/∑P

∴ t = 72 Wh/(3.36 W) = 21.4285714 h

∴ The time for all the lights to go out, t ≈ 21.43 h

The time for all the lights to go out = The time for the lamps to use all the power available in the battery = t ≈ 21.43 h

∴ The time for all the lights to go out ≈ 21.43 hours.

Answer:

7.35..kg

Explanation:

Hope this will help you

Please,Mark me as Brainllist .

Explanation:

transfer to babes are always at your advice by a particular motion being a particular wave motion along didn't wave is a wave which particular is a medium move a direction parallel to the direction of the wave moves something that is similar in the surveys on the medium moves of the same direction and bathe an accident to one or two Dimensions do in London killing babe attacks in one dimension and transverse waves attacks in two Dimensions the Waze cannot be paralyzed or organized

Answer: The maximum displacement the spring is stretched or compressed from its equilibrium position is its AMPLITUDE.

Explanation:

In simple harmonic motion, the restoring force which pulls the oscillating body back towards its rest position is proportional in magnitude to the displacement of the body from the rest position.

The simple harmonic motion in terms of MASS AND SPRING, simple pendulum and loaded test tube is the motion or movement of a particle in a to and fro movement along a straight line under the influence of force.

Mass and spring: This means when a string of suspended mass, M, with initial level of the spring is at rest, the spring will start moving upward and downward due to the imbalance of the suspended mass.

The maximum displacement as the spring is stretched or compressed from its equilibrium position is its AMPLITUDE. This is measured in units of meter.

Answer:

Water is polar molecule. ... The ionic compounds are dissolved as these ions attract the hydrogen( negative charge attraacts them) and oxygen (positive charge attracts them) whereas methanol is a polar molecule and forms hydrogen bond with water molecules and hence dissolves.

Explanation:

Answer:

2000J

Explanation:

The formula for work is W=Force x Distance

W=FxD

W=500N x 4m

W=2,000 Joules