Polar covalent bond is said to have a dipole, which exists whenever opposite charges are separated from each other

Charlotte is driving at 69.8 mi/h and receives a text message. She looks down at her phone and takes her eyes off the road for 3.27 s.  102.02 m  far has Charlotte traveled in feet during this time.

The term speed is defined as the rate of change of position of an object in any direction.

Given:

The speed at which charlotte is driving = 69.8 mi/h

The time which she took of her eyes from the road = 3.27 s

During the entire journey, the time at which she took her eyes off the road, she is probably not driving.

We will have to convert the 69.8 mi/h to m/s

Since 1 mi/hr = 0.44704 m/s

69.8 mi/h will be:

= (69.8 mi/hr × 0.44704 m/s) ÷ 1 mi/hr

= 31.20 m/s

Now, using the relation:

Speed = distance/ time

31.20 m/s = (distance)  / 3.27s

By Cross multiplying

Distance = 31.20 m/s  × 3.27s

Distance = 102.02 m

Thus, Charlotte traveled by feet for 102.02 m during this time.

To learn more about the speed, follow the link;

https://brainly.com/question/28224010

#SPJ1

Answer:

A. Gasoline ignites in an engine.

The E2 elimination reaction of cyclo-alkylhalides are usually stereo selective. Usually trans isomer reacts slowly than cis-isomer. So the elimination reaction in an alkaline potassium hydroxide medium will be  1-methyl cyclohexene.

The reason behind stereo selectivity is because pf the spatial orientation of the substituents on the ring structure. For cyclic compounds this has a great influence to direct a reaction in Regio-selectivity. The transition state between the reactant and product  influence in the rate of elimination reaction.

Here the major elimination product is 1-methyl cyclohexene and a minor amount of 3-methyl cyclohexene is also produced.

For more information regarding elimination reaction, kindly refer

https://brainly.com/question/28239179

#SPJ4  

(The question is not complete. The complete question is given as an image)

The molar mass of the sugar according to freezing point depression is 342 g.

Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.

The molecular mass and formula mass are used as synonym for the molar mass.It does not depend on the amount of substance which is present in the sample.It has units of gram/mole.

The freezing point depression is related to molar mass as ΔTf= Kf×mass/molar mass×1/mass of solvent in kg .On substitution,molar mass=1.86×342/1.86=342 g.

Thus, the molar mass of sugar is 342 g.

Learn more about molar mass,here:

https://brainly.com/question/22997914

#SPJ1

The natural abundance of 36Ar is 0.337%, and its molecular weight is 35.96755 amu. The natural abundance of 38Ar is 0.063%, and its molecular weight is 37.96272 amu. The natural abundance of 40Ar is

The total atomic weight of every atom in a substance's molecule is that substance's molecular weight. Common units of measurement include atomic mass units (amu) and daltons (Da). The number of atoms of each element present in a molecule is multiplied by the atomic weight of that element, and the sum of all these values is used to determine the substance's molecular weight. An essential physical characteristic that may be utilised to identify a material and forecast how it will behave in chemical reactions is its molecular weight. The molar concentration of a solution is calculated, the amount of a drug contained in a sample is determined, and many more practical applications are also employed.

Learn more about molecular weight here:

https://brainly.com/question/27988184

#SPJ4

The limiting reactant and excess reactant can be determined by a concept known as the Law of Conservation of Mass.

To learn more about The limiting reactant and excess reactant refer to:

https://brainly.com/question/14222359

#SPJ1

A rocket travels in a straight line at a speed of 5000 m/s. After 1 min, it is 10,000 m/s. 83.33ms⁻² is the rocket's acceleration.

The rate of change of velocity is defined as acceleration. Acceleration usually indicates that the speed is changing, but this is not always the case. When an object moves in a circular path at a constant speed, it is still accelerating because its velocity direction changes.

Vf = Vo + at

Vf = Final velocity

Vo = Initial Velocity

a = acceleration

t = time required

Making "a" the subject

a = Vf - Vo/(t)

a = 10,000–5,000/(60)

a = 5,000/60

a = 83.33ms⁻²

Thus, 83.33ms⁻² is the rocket's acceleration.

To learn more about an acceleration, follow the link;

https://brainly.com/question/12550364

#SPJ1

The fundamental driving force behind the transition of planetesimal to full-fledged planets is gravity.

The quest has advanced significantly, but there is still plenty to do. It will need more time and money to develop an industrial fusion reactor, which is still several decades away. Fusion isn't always the sustainable technology of the future; that will be solar, wind, plus nuclear fission. However, it is the technology of the future.

When light elements as hydrogen combine to create atoms like helium, nuclear fusion takes place. The Sun will run out of hydrogen in its core and lack sufficient material for nuclear fusion in around 5 billion years.

To know more about nuclear fusion visit:

https://brainly.com/question/19922155

#SPJ4

The matching is as follows:

Spontaneous processes are processes that occur within the system itself as soon as it is started, no work is needed from outside the system (external work) for the process to continue. On the other hand, nonspontaneous processes will not occur unless external work is continuously applied

The statement above shows that the process that occurs spontaneously occurs in one direction (irreversible). Meanwhile, non-spontaneous reactions occur in the opposite direction (reversible).

It can be said to be in equilibrium, if the rate of the reaction to the right is equal to the rate. The reaction is to the left, so that the ratio of the concentrations of the reactants and products remains the same.

Learn more about nonspontaneous processes at https://brainly.com/question/10601562

#SPJ4

The fill in the blanks is as follows :

a) Reactants

b) Products

The value of the equilibrium constant k is the measure of how far will the reaction proceeds toward produce the products at a temperature.

a) A small value of k indicates that the reaction will favors the reactants.

b) Whereas a large value of k indicates that the "product" will be present in the higher proportion.

The equilibrium reaction is the state of the reaction where the rate of the forward reaction is equals to the rate of the backward reaction. The rate of the forward reaction is equals to the rate of the backward reaction.

This question is incomplete , the complete question is :

The value of the equilibrium constant k is a measure of how far the reaction proceeds toward the products at a given temperature. a small value of k indicates that the reaction favors the , whereas a large value of k indicates that the will be present in a higher proportion. multiple choice question.

a) Reactant

b) Product

c) Both reactant and product

To learn more about equilibrium reaction here

https://brainly.com/question/15118952

#SPJ4

The electrophilicity of atom, ion and the molecule property to accept the electron. The order of electrophilicity of carbonyl carbon is :

RCHO > R₂CO > RCO₂R'

The electrophiles are the species that are electron deficient. The electrophiles are attracted towards the electron rich center. For the  carbocations the α carbons of the carbonyls, or the atoms with lots of electron withdrawing groups  are the great electrophiles. The electrophiles are the species which makes the bond with the nucleophiles. The electrophiles species that have an atom with the charge +. The aldehyde towards nucleophilic reactions are more reactive than the ketones due to the steric hindrance.

The presence of the two substituents in the ketones hinders. The reason for the ester is same that is due to steric .

Thus, the electrophiles are the electron deficient and are attracted to the electron rich center.

The question is incomplete , the complete question is :

Rank the electrophilicity of the center carbons from most to least electrophilic of the below molecules and explain your answer.

a) RCHO

b) R₂CO

c) RCO₂R'

To learn more about electrophile here

https://brainly.com/question/28026083

#SPJ4

The scientific basis for prescribing and giving donepezil (Antidepressants), a cholinesterase inhibitor, is that it enhances the accessibility of acetylcholine through cholinergic synapses.

The degradation of acetylcholine is slowed down by cholinesterase inhibitors. They use it to treat dementia, including signs of Alzheimer's. This activity discusses the many applications of alkylating drugs in the treatment of neurodegenerative disorders as well as their recommendations, modes of action, and restrictions.

Galantamine as well as rivastigmine are two of the three antidepressants that have been approved for the management of cognition brought on by Parkinson disease. They are thought to work by compensating for reduced cholinergic synaptic transmission, which is another feature of VCI.

To know more about cholinesterase inhibitor visit:

https://brainly.com/question/28274707

#SPJ4

The oxidation state of the transition metal in the coordination compounds is as follows :

a) [CoBr(NH₃)₅]Br is +2

b) [PtCl(CO)₃]Cl₃ is + 4

c) Na₂[CuCl₄(H₂O)₂] is +2

a) [CoBr(NH₃)₅]Br

Charge on Br = -1

Charge on NH₃ = 0

The oxidation state of Cobalt is :

Co - 1 - 1 = 0

Co = + 2

b) [PtCl(CO)₃]Cl₃

The Charge on Cl = -1

The Charge on CO = 0

The oxidation state of platinum is :

Pt - 1 - 3 = 0

Pt = + 4

c) Na₂[CuCl₄(H₂O)₂]

The charge on Na = + 1

The charge on Cl = - 1

The oxidation state of Copper is :

2 + Cu - 4 = 0

Cu = + 2

To learn more about oxidation state here

https://brainly.com/question/20750330

#SPJ4

If an asteroid created enough dust to block out the Sun, it would likely have a severe and devastating effect on life on Earth.

Green plants, which rely on sunlight for photosynthesis, would not be able to produce the energy they need to survive, leading to mass die-offs of vegetation. This would in turn have a cascading effect on the entire ecosystem, as animals that depend on plants for food would also struggle to survive. The lack of sunlight would also cause a decrease in temperature, which can have a negative impact on many organisms.

The lack of sunlight would also have a severe impact on the climate and weather patterns, leading to a "nuclear winter" scenario, where the temperature drops significantly, leading to the extinction of many species, including the human species, who rely on the food chain.

One mole of copper contains 6.02 × 10²³ Cu atoms or formula units. Hence, 3.01 × 10²³copper atoms  is half mole of copper.

One mole of a substance is its amount containing 6.02 × 10²³  atoms or molecules. This number is called Avogadro number. One mole of every elements contains Avogadro number of atoms.

Similarly one mole of every compound contains 6.02 × 10²³  molecules. The mass of one mole of compound is called its molar mass.

Cu is 29th element in periodic table. Cu is a transition metal.  One mole of Cu  contains 6.02 × 10²³Cu atoms .

Hence number of moles  of 3.01 × 10²³copper atoms is:

3.01 × 10²³/ 6.02 × 10²³  = 0.5 moles .

0.5 moles of copper is taken in this experiment. Thus, we have to weigh the sample accordingly.

Find more on Avogadro number:

brainly.com/question/11907018

#SPJ1

To convert the pressure inside the bag from mm Hg to kPa, we can use the conversion factor:

1 kPa = 7.5 mm Hg

So, we can divide the pressure in mm Hg by 7.5:

761.3 mm Hg / 7.5 = 101.5 kPa

So, the pressure inside the bag of potato chips is approximately 101.5 kPa.

It is important to note that the conversion factor of 1 kPa = 7.5 mm Hg, is an approximation and it can vary depending on the temperature and altitude.

Therefore, the pressure inside the bag of potato chip in kPa is 101 kPa (rounded to the nearest whole number)

Toxic material with its most dangerous property:

bromine: corrosive

mercury: neurotoxicity

strong bases: severe skin and eye irritation/burns

formaldehyde: carcinogenicity

cyclic ethers: central nervous system depression.

Bromine is a toxic material that is highly corrosive, which means it can cause damage to the skin and eyes, as well as damage to internal organs if ingested.

Mercury is a toxic metal that is highly neurotoxic, meaning it can damage the nervous system and cause neurological symptoms such as tremors, memory loss, and difficulty walking.

Strong bases, such as lye, can cause severe skin and eye irritation and burns, and can also cause damage to internal organs if ingested.

Formaldehyde is a toxic chemical that is classified as a carcinogen, meaning it has the potential to cause cancer.

Cyclic ethers are a group of chemicals that are known to cause central nervous system depression, which can lead to symptoms such as drowsiness, confusion, and unconsciousness.

To know more about Bromine,

https://brainly.com/question/29301746

#SPJ4

The systems that work done by the surroundings on the system are  CO₂ (s)→ CO₂(g) and  CaCO₃ (s) → CaCO (s) + CO₂(g). The correct answer is b and e.

When a system transitions from one state (one set of values for its physical attributes) to another state, a process known as the thermodynamic process takes place. When all of the system's macroscopic physical properties regain their original values, the system is said to have returned to its initial state. If the system is doing the job, it has a negative sign.

W = ΔP V is the formula for determining work given pressure (P) and volume (ΔV) changes.

W= negative for any work done by the system on the environment.

ΔV must be a positive number.

When a system transitions from a lower active state, such as solid to liquid, solid to gas, or liquid to gas, V is positive.

As a result, choices (B) and (E) are suitable responses.

Learn more about work done at https://brainly.com/question/14581707

#SPJ4

In all scenarios, the oxygen and carbon will mix at the same ratio of 1:2, making up the same amount of C02. The law of represents the quantity is related.

Numerous health impacts from CO2 exposure might be experienced. These symptoms can include a coma, hypoxia, convulsions, sweating, a tingling or pins-and-needles sensation, headaches, disorientation, unrest, a tingling or pins-and-needles feeling, and difficulty breathing.

The most significant greenhouse gas on Earth is carbon dioxide, which both absorbs and distributes heat. In contrast to oxygen and nitrogen, which together make up the majority of our atmosphere, greenhouse gases take in heat emitted from the Planet's surface and re-emit it in all directions, especially back to towards the planet's surface.

To know more about carbon dioxide visit:

https://brainly.com/question/3049557

#SPJ4

In the second, third, fourth, fifth, and sixth squares, there is a pair each of upward and downward-pointing arrows, so the magnetic quantum number is -3, -2, -1, 0, 1, 2, and 3.

The magnetic quantum number, which ranges from -l to +l, provides information about the orientation of the electron's orbital, which is the angular momentum of the electron, and is important as it can be used to specify the exact spatial orientation of an electron's orbital.

Hence, in the second, third, fourth, fifth, and sixth squares, there is a pair each of upward and downward-pointing arrows, so the magnetic quantum number is -3, -2, -1, 0, 1, 2, and 3.

Learn more about the magnetic quantum number here.

https://brainly.com/question/28943816

#SPJ1

Answer:

1583.76 g O2

Explanation:

For every one molecule of B2H6 that reacts, 3 molecules of O2 are needed. To determine the mass of liquid oxygen (LOX) needed to burn 190.3 g of B2H6, use the balanced equation as a conversion factor.

1 mole of B2H6 = 28.02 g

1 mole of O2 = 32 g

Using the balanced equation above, you know that for every 1 mole of B2H6, 3 moles of O2 are needed.

Therefore, the mass of O2 needed for 190.3 g of B2H6 is:

190.3 g B2H6 * (3 moles O2 / 1 mole B2H6) * (32 g O2 / 1 mole O2) = 1583.76 g O2

The free energy change for the same reaction when the concentrations of A and B are 0.01 M and 1 M, respectively, is -2.501 kJ/mol.

The free energy change, ΔG, for the chemical reaction A → B is determined by the equation ΔG = -RT ln(K), where R is the gas constant, T is the temperature, and K is the equilibrium constant.

Because the temperature of the reaction is held constant, the ΔG will remain the same no matter what the concentrations of A and B are.

To calculate the free energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively, we need to calculate the new equilibrium constant, K.

K is equal to the product of the concentrations divided by the reactants. For this reaction, K = (1 M)(0.01 M)/(10 M) = 0.001.

Plugging this value of K into the equation for ΔG,we get

ΔG = -RT ln(K) = -(8.314 J/K mol)(310 K) ln(0.001) = -2.501 kJ/mol.

This is the free energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively.

To learn more about energy, click here:

https://brainly.com/question/1932868

#SPJ4

The compound that we have in the SDS is glycerol.

We know that the SDS is the acronym that stands for the safety data sheet. This is the kind of sheet that tells us about the properties of a substance and any other safety information that we might need.

From the information, we can see that compound is not flammable and that it does not vaporize quite easily thus it is quite safe and this would correspond to glycerol. This corresponds to the safety data sheet that we have.

Learn more about glycerol:https://brainly.com/question/9944804

#SPJ1

The atomic number of Q is 16, since the number of protons in an atom is equal to its atomic number.

What do you mean by atomic number?

The atomic number of an element is basically the number of protons in the nucleus of an atom of that element. It is unique for each element and is used to identify and distinguish one element from another. The atomic number is also equal to the number of electrons in a neutral atom of that element.

The atomic number of an atom is determined by the number of protons in the nucleus. Protons have a positive charge, and since an atom has no net charge, the number of protons in an atom must be balanced by an equal number of electrons. The number of protons in an atom is unique to each element, so it is used to identify the element and is referred to as its atomic number. Since Q has 16 protons, its atomic number is 16.

To know more about atomic number,

https://brainly.com/question/11353462

#SPJ1

the mass of liquid oxygen (LOX) that would be needed to burn 190.3 g of B2H6 is approximately 332.9 g.

The mass of B2H6 is given as 190.3 g, and the molar mass of B2H6 is 27.66964 g/mol.

So using this molar mass, we can find the number of moles of B2H6 using the following calculation:

190.3 g / 27.66964 g/mol = 6.918 moles of B2H6

Now we use the balanced equation to find the number of moles of O2 that are needed.

B2H6(g) + 3 O2(l) → 2 HBO2(g) + 2 H2O(l)

The coefficient of O2 on the reactant side is 3, so for every 3 moles of O2 consumed, 2 moles of B2H6 are consumed.

Therefore, we can use the following conversion factors to find the moles of O2 needed:

6.918 moles B2H6 x 3 moles O2/2 moles B2H6 = 10.377 moles O2

To find the mass of O2 that is needed, we will use the molar mass of O2 which is 32 g/mol

10.377 moles O2 x 32 g/mol = 332.9 g O2

So the mass of liquid oxygen (LOX) that would be needed to burn 190.3 g of B2H6 is approximately 332.9 g.

Laern more on how to find  mass of liquid oxygen (LOX) : https://brainly.com/question/8854450

#SPJ1

Answer: 10 moles of Na are needed to react with 5 moles of O2 in the reaction 2 Na + O2 → Na2O2.

At position 1 at physiological ph, the carboxylic acid group of an amino acid will be deprotonated , while the amino group will be protonated yielding the zwitterion form.

Because the amine group of such an amino acid has an extremely high pKa, it will tend to attach a proton and become positively charged at physiological pH (about 7). Similarly, because the acid group seems to have a relatively low pKa, this would tend to transfer its proton towards water around pH 7, appearing negatively charged.

The side chain, amino group, as well as carboxyl backbone would each be protonated (+1 net charge) at a pH less than 2.2 (acidic circumstances). Each of these groups would just be deprotonated at such a pH greater than 9.7 (basic circumstances) (negative 2 net charge).

To know more about carboxylic acid

https://brainly.com/question/30160762

#SPJ4

Answer:

Magnesium nitride contains 3 magnesium cations and 2 nitride anions . This means that one mole of magnesium nitride will contain 3 mole of magnesium cations and 2 moles of nitride anions.