PLEASE HELPPPPPP <333​

Answer:

60mph=26.8224meters per second

Explanation:

Answer:

If you are at sea level, each square inch of your surface is subjected to a force of 14.6 pounds. The pressure increases about one atmosphere for every 10 meters of water depth. At a depth of 5,000 meters the pressure will be approximately 500 atmospheres or 500 times greater than the pressure at sea level.

Explanation:

At sea level, a force of 14.6 pounds is applied to every square inch of your surface. For every 10 meters of sea depth, the pressure rises by approximately one atmosphere. The pressure will be about 500 atmospheres, or 500 times more than the pressure at sea level, at a depth of 5,000 meters.

Pressure is defined as the force applied perpendicularly to an object's surface divided by the surface area over which it is applied.

Pressure is the physical amount of force exerted on a particular area.

Pressure can be expressed as

Pressure = Force / area

There are three types  of pressure.

Thus, at sea level, a force of 14.6 pounds is applied to every square inch of your surface. For every 10 meters of sea depth, the pressure rises by approximately one atmosphere. The pressure will be about 500 atmospheres, or 500 times more than the pressure at sea level, at a depth of 5,000 meters.

To learn more about pressure, refer to the link below:

https://brainly.com/question/15170210

#SPJ2

Answer:

strongest are at the points of the north pole and the south pole, specifically between the red box and the letter of each pole.

Explanation:

The lines of magnetic force are drawn so that the density of lines is proportional to the intensity of the magnetic field.

Therefore, the sections where the magnetic field is strongest are at the points of the north pole and the south pole, specifically between the red box and the letter of each pole.

Answer:

Homogeneous mixtures

Explanation:

I think so because homogeneous means mixed mixtures

Answer:

The magnitude of the force per unit length is 2.145 x 10⁻⁵ N/m and the direction of the force is outward or repulsive since the current in the two parallel wires are flowing in opposite direction.

Explanation:

Given;

distance between the parallel wires, r = 5.0 cm = 0.05 m

current in the first wire, I₁ = 1.65 A

current in the second wire, I₂ = 3.25 A

The magnitude of the force per unit length between the two wires is calculated as follows;

[tex]\frac{F}{l} =\frac{\mu_0 I_1 I_2}{2\pi r} \\\\\frac{F}{l} =\frac{4\pi \times 10^{-7} \times 1.65 \times 3.25}{2\pi \times 0.05} \\\\\frac{F}{l} = 2.145 \times 10^{-5} \ N/m[/tex]

Therefore, the magnitude of the force per unit length is 2.145 x 10⁻⁵ N/m and the direction of the force is outward or repulsive since the current in the two parallel wires are flowing in opposite direction.

Answer:

The speed of the plank relative to the ice is:

[tex]v_{p}=-0.33\: m/s[/tex]

Explanation:

Here we can use momentum conservation. Do not forget it is relative to the ice.

[tex]m_{g}v_{g}+m_{p}v_{p}=0[/tex] (1)

Where:

Now, as we have relative velocities, we have:

[tex]v_{g/b}=v_{g}-v_{p}=1.55 \: m/s[/tex] (2)

v(g/b) is the speed of the girl relative to the plank

Solving the system of equations (1) and (2)

[tex]45v_{g}+168v_{p}=0[/tex]

[tex]v_{g}-v_{p}=1.55[/tex]

[tex]v_{p}=-0.33\: m/s[/tex]

I hope it helps you!      

Answer:

Carbon dioxide

Explination:

I remember it from biology.

I hope this helps ^-^

In a chemical reaction, carbon combines with oxygen to form carbon dioxide gas.

A chemical reaction can be defined as a process that causes the chemical transformation of one chemical substance to another. The chemical reactions accompany chemical changes that involve the rearrangement of electrons in the forming and breaking of bonds between atoms, with no change to the nuclei.

The substances which are primarily involved in a reaction are known as reactants or reagents. Chemical reactions are commonly characterized by a chemical change, and yield products, which exhibit properties different from the reactants.

Chemical reactions take place at a characteristic rate of reaction at a given temperature, pressure, and chemical concentration. The rates increase with the increasing temperature of the reaction when more thermal energy is available to achieve the activation energy for breaking bonds between atoms.

The combustion reaction takes place when carbon combines with oxygen to produce carbon dioxide gas.

Learn more about Chemical reactions, here:

https://brainly.com/question/22817140

#SPJ2

Answer:

I cheated on

Spanish

ELA

history

Explanation:

Answer:

thx

Explanation:

Answer:  The younger elliptical and lenticular galaxies had results similar to spiral galaxies like the Milky Way. The researchers found that the older galaxies have a larger fraction of low-mass stars than their younger counterparts.

Explanation:

Answer:

B . Second law

Explanation:

According to second law:

Net Force acting on the body produce acceleration. The magnitude acceleration of the body is directly proportional to net force and inversly proportional to the mass.

Mathematically:

                   a = [tex]\frac{F}{m}[/tex]

and

                   F = ma

So according to the given condition Waldo should use Second law.

Answer:

sum of volumes = (16.6 ± 0.03) cm³

and difference of volumes = (3.8 ± 0.03) cm³

Explanation:

Here,

V₁ = (10.2 ± 0.02) cm³ and V₂ = (6.4 ± 0.01) cm³.

Now,

∆V = ± (∆V₁ + ∆V₂)

= ± (0.02 + 0.01) cm³

= ± 0.03 cm³

V₁ + V₂ = (10.2 + 6.4) cm³ = 16.6 cm³ and

V₁ - V₂ = (10.2 - 6.4) cm³ = 3.8 cm³

Thus, sum of volumes = (16.6 ± 0.03) cm³

and difference of volumes = (3.8 ± 0.03) cm³

-TheUnknownScientist

Answer:

I hope it's helpful .............

Answer:

92.7 km

Explanation:

Since the magnetic field due to a solenoid is given by B = μ₀Ni/L where  μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, N = number of turns of solenoid, L = length of cardboard tube = 58 cm = 0.58 m, , i = current in wire = 2.5 A and l = length of wire.

So, N = BL/μ₀i

Since B = 2.0 kG = 2.0 × 10³ G = 2.0 × 10³ × 10⁻⁴ T = 2.0 × 10⁻¹ T = 0.2 T

So, substituting the variables into the equation, we have

N = BL/μ₀i

N = 0.2 T × 0.58 m/(4π × 10⁻⁷ H/m × 2.5 A)

N = 1.16 Tm/(31.416 × 10⁻⁷ HA/m)

N = 0.0369 × 10⁷ turns

N = 0.0369 × 10⁷ turns

N = 3.69 × 10⁵ turns

length of wire l = NC where N = number of turns and C = circumference of tube = πD where D = diameter of tube = 8.0 cm = 0.08 m

So, l = NC

= NπD

= πND

= π × 3.69 × 10⁵ turns × 0.08 m

= 0.9274 × 10⁵ m = 9.274 × 10⁴ m

= 92.74 × 10³ m

= 92.74 km

≅ 92.7 km

The total legnth of the wire to built a solenoid will be  92.7 km

A solenoid is a electromagnet in which the wires are wounded on the outer surface of the soft iron and then the current is passed so due to flow of the current the magnetic field generated around the wire.

Since the magnetic field due to a solenoid is given by

B = μ₀Ni/L

where

μ₀ = permeability of free space = 4π × 10⁻⁷ H/m,

N = number of turns of solenoid,

L = length of cardboard tube = 58 cm = 0.58 m, ,

i = current in wire = 2.5 A and

l = length of wire.

Since B = 2.0 kG = 2.0 × 10³ G = 2.0 × 10³ × 10⁻⁴ T = 2.0 × 10⁻¹ T = 0.2 T

So, substituting the variables into the equation, we have

[tex]N=\dfrac{BL}{\mu_oI}[/tex]

[tex]N=\dfrac{0.2\times 0.58}{4\pi\times 10^{-7} \times 2.5}[/tex]

[tex]N=\dfrac{1.16}{31.416\times 10^{-7}}[/tex]

N = 0.0369 × 10⁷ turns

N = 0.0369 × 10⁷ turns

N = 3.69 × 10⁵ turns

length of wire l = NC where N = number of turns and C = circumference of tube = πD where D = diameter of tube = 8.0 cm = 0.08 m

So, l = NC

= NπD

= πND

= π × 3.69 × 10⁵ turns × 0.08 m

= 0.9274 × 10⁵ m = 9.274 × 10⁴ m

= 92.74 × 10³ m

= 92.74 km

≅ 92.7 km

Hence the total legnth of the wire to built a solenoid will be  92.7 km

To know more about solenoid follow

https://brainly.com/question/26137834

Answer:

720N

Explanation:

180+(40×10)+140=720 remember we can only add with same units ;1kg=10N therefore 40 kg=(40×10)N=400N

The net force would be the summation of all the forces in addition to the weight force of the 40 kg weight, thus the net force of all the forces would come out to be 712.4 Newtons.

Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.

F = ma

As given in the problem we have to find the net force,

Let us assume the acceleration due to gravity would be 9.81 m/s².

The force generated by the 40-kilogram weight =40 ×9.81 Newtons.

The force generated by the 40-kilogram weight = 392.4 Newtons

Net force = 180 + 140 +392.4

                =712.4 Newtons

Thus, the net force of all the forces would come out to be 712.4 Newtons.

Learn more about Newton's second law from here,

brainly.com/question/13447525

#SPJ2

Answer:

I think is is

Explanation:

B and C why because i have a gut feeling

Answer:

let say it will be positive

The magnitude of the angular acceleration of the pendulum at the moment of release is; α = 18.45 rad/s²

We are given;

Mass of rod; m = 1 kg

Length of rod; L = 49.8 cm = 0.498 m

Mass of Disk; M = 4 kg

Radius of disk; r = 24.9 cm = 0.249 m

Let us first calculate the torque acting from the formula;

τ = mg(L/2) + MgL

Thus;

τ = (1 × 9.8 × (0.498/2)) + (4 × 9.8 × 0.498)

τ = 21.96 N.m

Using parallel axis theorem, we can find the moment of inertia about the given axis as;

I = (mL²/3) + ½MR² + ML²

Plugging in the relevant values gives;

I = (1 * 0.498²/3) + ½(4 * 0.249²) + (4 * 0.498²)

I = 1.19 kg.m²

The angular acceleration is given by the formula;

α = I/τ

α = 21.96/1.19

α = 18.45 rad/s²

Read more at; https://brainly.com/question/23321366

Answer:

[tex]1863.9\ \text{kg}[/tex]

Explanation:

[tex]m_1[/tex] = Mass of car = 1571 kg

[tex]u_1[/tex] = Initial velocity of car = 129 km/h

[tex]u_2[/tex] = Initial velocity of the animal = 0

[tex]v[/tex] = Velocity of combined mass = 59 km/h

[tex]m_2[/tex] = Mass of the animal

As the momentum of the system is conserved we have

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow \dfrac{m_1u_1+m_2u_2}{v}-m_1=m_2\\\Rightarrow m_2=\dfrac{1571\times 129+0}{59}-1571\\\Rightarrow m_2=1863.9\ \text{kg}[/tex]

The mass of the animal is [tex]1863.9\ \text{kg}[/tex].

Answer:

[tex]\mathbf{v_{ground} = \sqrt{{v^2+2ghb}}}[/tex]

Explanation:

From the information given:

The avg. velocity post the window is;

[tex]v_{avg} = \dfrac{L_w}{t}[/tex]

[tex]v_b[/tex] = velocity located at the top of the window

[tex]v_b[/tex] = velocity situated at the bottom of the window  

Using the equation of kinematics:

[tex]v_b = v_t + gt[/tex]

Hence,

[tex]v_t = v_b - gt[/tex]

To determine the average velocity as follows:

[tex]v_{avg} = \dfrac{1}{2} (v_t + v_b)\dfrac{L_w}{t}= \dfrac{1}{2}(v_b - gt +v_b) \\ \\\dfrac{L_w}{t} = v_b - \dfrac{1}{2}gt \\ \\ v_b = \dfrac{L_w}{t }+ \dfrac{1}{2} gt\\ \\ = \dfrac{1}{t} \Bigg(L_w + \dfrac{1}{2}gt^2 \Bigg) \\ \\[/tex]

where;

[tex]v_b[/tex] = velocity gained when fallen through the height h.

Similarly, using the equation of kinematics, we have;

[tex]v_b^2 = 2gh \\ \\h = \dfrac{v_b^2}{2g}[/tex]

[tex]\implies \dfrac{(L_w + \dfrac{1}{2} gt^2_^2}{2gt^2}[/tex]

Thus, the velocity at the ground is;

[tex]v^2_{grround} = v_b^2 + 2ghb[/tex]

[tex]\mathbf{v_{ground} = \sqrt{{v^2+2ghb}}}[/tex]

Answer: I like your profile picture

Explanation:

Answer:

The base of taller buildings are made broader because it reduces the pressure exerted on the ground so that they do not sink in due to the extremely high pressure of the building.

Explanation:

hope thiss helpss~!

A broad base is used to engage or recruit a diverse range of individuals to broad-based environmentalism.

Find out more about the broader base here:

brainly.com/question/14313691

Answer:

-33750 N

Explanation:

Use coulomb's law: [tex]\frac{k(q1)(q2)}{r^{2} } = \frac{(9x10^{9})(-5x10^{-6})(3x10^{-6})}{0.002^{2} } = -33750 N[/tex]

Answer: C. Ribosome

Explanation: Ribosome is responsible for protein synthesis. I got it right on khan academy :) hope this helps have a blessed day.

The structure which is represented by the letter C is known as free ribosomes. Thus, the correct option for this question is C.

Ribosomes may be defined as a type of cell organelle which is spherical and glandular in shape. They occur freely in the matrix or remain bound with ER.

The major components of ribosomes may include RNA and protein. Ribosomes were first discovered by Palade in 1953. There are two types of ribosomes, ie. the 70s and 80s.

Ribosomes play an important function in the process of protein synthesis. The structure which is represented by the letter A is known as the cell membrane. The structure which is represented by the letter B is known as Cytosol.

Therefore, the structure which is represented by the letter C is known as free ribosomes. Thus, the correct option for this question is C.

To learn more about Ribosomes, refer to the link:

https://brainly.com/question/8773679

#SPJ2

Answer:

The Earth's magnetic field intensity is roughly between 25,000 - 65,000 nT (.25 -.65 gauss).

Explanation:

To measure the Earth's magnetism in any place, we must measure the direction and intensity of the field. The Earth's magnetic field is described by seven parameters. These are declination (D), inclination (I), horizontal intensity (H), the north (X), and east (Y) components of the horizontal intensity, vertical intensity (Z), and total intensity (F). The parameters describing the direction of the magnetic field are declination (D) and inclination (I). D and I are measured in units of degrees, positive east for D and positive down for me. The intensity of the total field (F) is described by the horizontal component (H), vertical component (Z), and the north (X) and east (Y) components of the horizontal intensity. These components may be measured in units of gauss but are generally reported in nanoTesla (1nT * 100,000 = 1 gauss). The Earth's magnetic field intensity is roughly between 25,000 - 65,000 nT (.25 - .65 gauss). Magnetic declination is the angle between magnetic north and true north. D is considered positive when the angle measured is east of true north and negative when west.  The magnetic inclination is the angle between the horizontal plane and the total field vector, measured positive into Earth. In older literature, the term “magnetic elements” is often referred to as D, I, and H.

The period of the vertical mass-spring is 0.64 s.

The angular speed of the vertical mass-spring is calculated as follows;

[tex]V_{max} = A \omega\\\\\omega = \frac{V_{max}}{A} \\\\\omega = \frac{7.02}{0.713} \\\\\omega = 9.85 \ rad/s[/tex]

The period of the vertical mass-spring is calculated as follows;

[tex]f = \frac{\omega }{2\pi} \\\\T = \frac{1}{f} \\\\T = \frac{2 \pi}{\omega } \\\\T = \frac{2\pi }{9.85} \\\\T = 0.64 \ s[/tex]

Thus, the period of the vertical mass-spring is 0.64 s.

Learn more about period of oscillation here: https://brainly.com/question/20070798

Answer:

The answer is C, I just guessed and got it right lol

Explanation:

Answer:

v = 2683.33 m/s

Explanation:

The magnetic force and the electric force on the electron must be the same, in order for them to cancel each other:

[tex]Electric\ Force = Magnetic\ Force\\Eq = qvBSin\theta \\\\v = \frac{E}{BSin\theta}[/tex]

where,

v = velcoity of electron = ?

E = Electric Field = 3059 V/m

B = Magnetic Field = 1.14 T

θ = Angle between velocity and magnetic field = 90°

Therefore,

[tex]v = \frac{3059\ V/m}{(1.14\ T)Sin90^o}[/tex]

v = 2683.33 m/s

Answer:

True

Explanation:

I’m not 100% sure