Answer:
C)0.19 mol/L .
Explanation:
Hello!
In this case, since the chemical reaction between sodium hydroxide and sulfuric acid is:
[tex]H_2SO_4+2NaOH\rightarrow Na_2SO_4+2H_2O[/tex]
Whereas a 1:2 mole ratio is seen between the acid and the base, we can write:
[tex]2*M_{acid}V_{acid}=M_{base}V_{base}[/tex]
In such a way, we solve for the concentration of base and plug in to obtain:
[tex]M_{base}=\frac{2*M_{acid}V_{acid}}{V_{base}} \\\\M_{base}=\frac{2*0.13mol/L*14.9mL}{20mL} \\\\M_{base}=0.19mol/L[/tex]
Thus, the answer is C)0.19 mol/L
Best regards!
All moving objects have kinetic energy. True False
Answer:
true
.......................
Answer: You're Welcome!
Oh, It's False - Kinetic energy depends upon the speed of the object; potential energy depends upon the position of the object.
If phosphofructokinase experienced a mutation that interfered with substrate binding, then what other enzyme is going to be most immediately impacted in terms of accessing substrate?
A. aldolase
B. fumarase
C. glucolactonase
D. hexokinase
Answer: A. aldolase
Explanation:
Phosphofructokinase, is an enzyme which is vital in the regulation of fermentation. It is involved in the glycolysis process.
When it experiences a mutation that was being interfered with the substrate binding, we should note that the enzyme that is going to be most immediately impacted in terms of accessing substrate is aldolase.
6. Primary succession usually occurs after which catastrophic events?
a.) Volcanic eruptions burning down a forest
5. Hurricanes flooding a forest
c. Tomadoes uprooting trees leaving behind the soil
d. Glaciers moving revealing bare rock underneath
Answer: d. Glaciers moving revealing bare rock underneath
Explanation:
Primary succession is what happens when living things colonise an area that was previously uncolonized because it had been destroyed or hadn't been created yet.
When glaciers move on from areas and expose the bare rock underneath, these areas are new and so primary succession will take place as living things begin to colonize this new area.
differentiate between normal publication window and the story editor window in desktop publishing
The main differentiation between given windows is that in normal publication window we can edit the document after generation also and the story editor window in desktop publishing we can not able to edit after generation.
What is windows?Windows in the computer world is a part of the graphical user interface (GUI), which is a separate viewing area on the display of monitor where they allow multiple viewing area.
In the normal publication window, word processing software like Microsoft Word, Pages, Writer and WordPerfect comes which is used to create any text document like resume, report, thesis, etc. which can be manipulate after the generation also.The story editor window in desktop publishing is used to create page layouts of any documents for publication in print or online.Hence, in the above paragraph differentiation is given.
To know more about windows, visit the below link:
https://brainly.com/question/25554117
In table below, there are descriptions of an experiment on samples of three different chemical compounds. Decide whether the compound is ionic or molecular, if you can. If there is not enough information to decide, choose can't decide in the third column.
Compound Description Ionic or molecular?
can't decide
1 Compound 1 is a hard grayish-white solid. A small 250. mg
sample of it is put into a quartz tube and heated strongly.
It starts to melt at 1055. °C.
2 Compound 2 is a hard grayish-white solid. When tapped
gently with a small hammer, a sample fractures into
fragments and a whitish powder. The powder is soluble in
water, and when 15 g are dissolved in 100 mL of water,
the solution conducts electricity well.
3 Compound 3 is a soft waxy white solid that can be easily
shaped and molded by hand. When the flame of an ordinary
laboratory burner is held about 10 cm away from the solid,
it rapidly and extensively melts into a clear liquid.
Answer:
Compound 1- ionic solid
Compound 2- can't really decide
Compound 3- molecular solid
Explanation:
An ionic solid has a very high melting point. It is hard but not brittle. It's solution or melt but not it's solid conducts electricity. Compound 1 is an ionic solid.
We can't really decide on compound 2 since it is brittle yet it's solution conducts electricity.
Lastly, compound 3 is a molecular solid since it has a low melting point.
Answer:
Compound 1- ionic solid
Compound 2- can't really decide
Compound 3- molecular solid
Explanation:
In the following acid-base the reaction HCI is
A. Acid
B. Conjugate acid
C. Conjugate base
HCl(g) + H2O(l) →H30+(aq) + Cl-(aq)
atom ,molecule, proton neutron electron, elements/compounds from SMALLEST to the BIGGEST.
Answer:
Electron,Protons/Neutrons,Atom,Molecule
Explanation:
the man is being warmed by?
radiation
convention
conduction
Answer:
Comvection
Explanation:
The movement causes the density to rise and therefore transfer more heat
Is Gold (Au) soluble?
Answer:
yes
Explanation:
The element in Period 4 and Group 14 of the Periodic Table would be classified as a
Answer:
Chalcogen
Explanation:
Sn + 2HCI --> SnCl2 + Hz
a. synthesis
b. single replacement
C. combustion
d. double replacement
e. decomposition
Answer:
Option B. Single replacement reaction
Explanation:
To know which option is correct, it is important that we know the definition of each option. The definition of each option is given below:
1. Synthesis reaction is a reaction in which two different elements or compound combine together to produce a new compound different from the two starting elements or compound. An example is illustrated below:
C + D —> E
2. Single replacement reaction is a reaction in which an element replaces or displaces another element in a compound. An example is illustrated below:
D + BC —> B + CD
3. Combustion reaction is a reaction in a substance react with oxygen to generate carbon dioxide (CO₂) and water (H₂O). An example can be seen when organic compound react with oxygen to produce carbon dioxide (CO₂) and water (H₂O). This is illustrated below:
CₓHᵧ + (x + y/4) O₂ —> xCO₂ + (y/2) H₂O
4. Double replacement reaction is a reaction in which the ions of the two reacting compound replaces one another to form new products. This is illustrated below:
X⁺Y¯ + U⁺V¯ —> X⁺V¯ + U⁺Y¯
5. Decomposition reaction is a reaction in which a large compound breaks down into two or more elements or compound. An example is illustrated below:
GH —> G + H
Now, observing the equation given in the question above:
Sn + 2HCl —> SnCl₂ + H₂
We can see that Sn replaces H in HCl to produce SnCl₂.
Therefore, the reaction is a single replacement reaction.
What was the unknown metal?
Answer:
is there a picture or something?
Explanation:
Explanation:
Your question is incomplete please update it.
what does the ideal gas law describe
Answer: the law that the product of the pressure and the volume of one gram molecule of an ideal gas is equal to the product of the absolute temperature of the gas and the universal gas constant.An ideal gas is a gas that conforms, in physical behaviour, to a particular, idealized relation between pressure, volume, and temperature called the ideal gas law
Complete the chemical equation and name the type of reaction taking place.
In the problem below, the ions have the following charges: Γ-2 and φ-2
H2Γ + φ(OH)2 -->
PLEASE HELP
how many electrons does a covelent bond consist of?
Answer: 2 electrons
Explanation: Good luck! :D
Crude oil has many applications once it has been distilled at a refinery. According to the diagram, what process is used to distill crude oil into its various components to use energy distribution?
A) separation by density
B) separation by boiling points
C) separation by the porosity of the components
D) separation by the organic content or each component
Answer:
B) separation by boiling points
Explanation:
According to the diagram depicted, crude oil is separated into its different units using boiling points.
The boiling points of a compound is the temperature at which it begins to boil. The process of fractional distillation is used in the oil industry to separate crude oil into its components. When the boiling point of a oil fraction is reached, it becomes vaporized and rises within the columnTrue or false: potential energy increases as like charges get closer to one another
aqueous hydrochloric acid HCl will react with solid sodium hydroxide NaOH to produce aqueous sodium chloride NaCl and liquid water H2O. Supposed 6.93 g of hydrochloric acid is mixed with 2.4 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 2 significant digits. g
Answer:
Explanation:
HCl + NaOH = NaCl + H₂O.
1 mole 1 mole 1 mole 1 mole
6.93 g of hydrochloric acid = 6.93 / 36.5 = .189 mole of HCl
2.4 g of NaOH = 2.4 / 40 = .06 mole of NaOH
NaOH is in short supply so it is the limiting reagent .
1 mole of NaOH reacts with 1 mole of HCl to give 1 mole of Water
.06 mole of NaOH will react with .06 mole of HCl to give .06 mole of water
Water formed = .06 mole
= .06 x 18 = 1.08 g
= 1.1 g
Why is it easier to switch to solar and wind energy as compared to other alternative energy sources? Select all that apply.
A. They are more cost-effective.
B. They require large, easily obtainable parcels of land.
C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Answer:C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Explanation:
Both c and d are correct
It is easier to switch to solar and wind energy as compared to other alternative energy sources because they can be produced easily in areas with geothermal activity and can be used for other purposes while supplying energy.
What is solar energy?Solar energy is any type of energy generated by the sun. Solar energy can be harnessed directly or indirectly for human use.
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution.
Diversifying energy supply and reducing dependence on imported fuels. Creating economic development and jobs in manufacturing, installation, and more.
Hence, options C and D are correct.
Learn more about the solar energy here:
https://brainly.com/question/23611169
#SPJ2

Someone unscramble the first mystery element because I don’t know how to.
-unnecessary comments will be reported
Answer:
Calcium
Explanation:
The symbol for the element with a mass number of 27 is actually Al for Aluminum instead of Co for Cobalt. Mass number refers to atomic mass, not atomic number.
Aluminum has an atomic mass of 26.982 or 27.
The letters to unscramble are I, M, C, Al, U, and C.
The mystery element is Calcium.
Hope that helps.
Marine chemist exam in the mass percent composition of manganese sulfide compound from ocean floor he determined that 60.2% of this compound is sulfur determine the mole ratio between manganese and sulfur
Explanation:
Let the mass of the compound be 100g.
There are 60.2g of sulfur.
Moles of sulfur
= 60.2g / (32.07g/mol) = 1.877mol
There are 100g - 60.2g
= 39.8g of manganese.
Moles of manganese
= 39.8g / (54.94g/mol) = 0.724mol
Mole ratio of manganese to sulfur
= 0.724mol : 1.877mol = 1 : 2.5.
Construct an explanation using Newton's Laws of Motion to describe the effects of balanced and unbalanced forces on the motion of an object.
Answer:
The manner in which objects will move is determined by the answer to this question. Unbalanced forces will cause objects to change their state of motion
Explanation:
Since these two forces are of equal magnitude and in opposite directions, they balance each other.
Answer:
balance force are those force whose resultant force is zero and unbalanced force are those whose resultant are non zero
A mixture is made by combining 1.61 lb of salt and 5.37 lb of water. What is the percentage of salt (by mass) in this mixture?
Answer:
Hey okau
Explanation:
X/100% = part / whole
X/100% = 1.62 / (1.62 + 4.81) = 0.252
X = 25.2%
Determine the oxidation number of
Sulphur in Sodium thiosulphate
The oxidation number of Sulphur = +2
Further explanationGeneral formula for determining Oxidation Numbers :
1. The number of oxidation of single element atoms = 0. Examples of Ar, Mg, Cu, Fe, N₂, O₂, etc. = 0
Group I : +1
Group II : +2
H in compound = +1, except metal hydride compounds (Hydrogen which binds I or II groups) oxidation number H = -1, for example, LiH, MgH₂, etc.
2. Oxidation number O in compound = -2, except OF2 = + 2 and in peroxide (Na₂O₂, BaO₂) = -1 and superoxide, for example KO₂ = -1/2.
3 The oxidation number in a non-filled compound = 0,
The total amount of oxidation in ion = ion charge, Example NO₃⁻ = -1
Sodium thiosulphate - Na₂S₂O₃
Oxidation number Na = +1 ⇒x2 = +2
Oxidation number O = -2 ⇒x3 = -6
Oxidation number Na₂S₂O₃ = 0
2.Na+2.S+3.O=0
2.+1+2.S+3.(-2)=0
2+2S-6=0
-4+2S=0
2S=4
S=+2
Need help asap
1. All nonmetals (except hydrogen) have 8 valence electrons?
True or False
2. The N^-3 ion is classified as a(n) ____ and has ____.
A. anion, 8 valence electrons
B. cation, 8 valence electrons
C. anion, 15 valence electrons
D. anion, 3 valence electrons
3. If two nonmetals react to form a compound and have very different _____ they form ____ bonds. If there is a small difference, then they form ____ bonds.
A. ionization energy; covalent; nonpolar ionic
B. electronegativity; nonpolar covalent; polar covalent.
C. ionization energy, ionic, nonpolar covalent
D. electronegativity, polar covalent, nonpolar covalent.
Answer:
1: false
2: B
Explanation:
I do not know the 3rd one
A sample of iron is put into a calorimeter (see sketch at right) that contains of water. The iron sample starts off at and the temperature of the water starts off at . When the temperature of the water stops changing it's . The pressure remains constant at . Calculate the specific heat capacity of iron according to this experiment. Be sure your answer is rounded to the correct number of significant digits.
Answer:
Therefore, the specific heat capacity of the iron is 0.567J/g.°C.
Note: The question is incomplete. The complete question is given as follows:
A 59.1 g sample of iron is put into a calorimeter (see sketch attached) that contains 100.0 g of water. The iron sample starts off at 85.0 °C and the temperature of the water starts off at 23.0 °C. When the temperature of the water stops changing it's 27.6 °C. The pressure remains constant at 1 atm.
Calculate the specific heat capacity of iron according to this experiment. Be sure your answer is rounded to the correct number of significant digits
Explanation:
Using the formula of heat, Q = mc∆T
where Q = heat energy (Joules, J), m = mass of a substance (g)
c = specific heat capacity (J/g∙°C), ∆T = change in temperature (°C)
When the hot iron is placed in the water, the temperature of the iron and water attains equilibrium when the temperature stops changing at 27.6 °C. Since it is assumed that heat exchange occurs only between the iron metal and water; Heat lost by Iron = Heat gained by water
mass of iron = 59.1 g, c = ?, Tinitial = 85.0 °C, Tfinal = 27.6 °C
∆T = 85.0 °C - 27.6 °C = 57.4 °C
mass of water = 100.0 g, c = 4.184 J/g∙°C, Tinitial = 23.0 °C, Tfinal = 27.6 °C
∆T = 27.6°C - 23.0°C = 4.6 °C
Substituting the values above in the equation; Heat lost by Iron = Heat gained by water
59.1 g * c * 57.4 °C = 100.0 g * 4.184 J/g.°C * 4.6 °C
c = 0.567 J/g.°C
Therefore, the specific heat capacity of the iron is 0.567 J/g.°C.
What do u notice about the molecules before and after the chemical reaction
Explanation:
In a chemical reaction, the atoms and molecules produced by the reaction are called products.
In a chemical reaction, only the atoms present in the reactants can end up in the products. No new atoms are created, and no atoms are destroyed.
In a chemical reaction, reactants contact each other, bonds between atoms in the reactants are broken, and atoms rearrange and form new bonds to make the products.
Shivani measures out 6.0 moles of epsom salt (MgSO) to put her bath. How many grams MgSO4 went in the bath?
Answer: 720 g
Explanation:
To solve this we must be knowing each and every concept related to mole. Therefore, shivani measures out 6.0 moles of epsom salt (MgSO[tex]_4[/tex]) to put her bath. 1,566g MgSO[tex]_4[/tex] went in the bath.
What is mole?A mole is merely a measuring unit. In reality, it is one of its International System of Units' seven foundation units. When current units are insufficient, new units are created.
Chemical reactions frequently occur at levels where employing grams would be inappropriate, but using absolute quantities of atoms/molecules/ions would also be misleading.
For all practical reasons, one mole of a substance in grams is nearly equal to 1 molecule for the compound per daltons.
Mathematically,
number of mole =given mass ÷ molar mass
number of mole=6.0 moles
molar mass of epsom= 261.47g/mol
substituting all the given values in the above equation, we get
6.0 moles =mass of epsom ÷ 261.47g/mol
mass of epsom =1,566g
Therefore, 1,566g MgSO[tex]_4[/tex] went in the bath.
To know more about mole, here:
brainly.com/question/15209553
#SPJ2
Copper metal reacts with silver nitrate to produce silver metal and copper (II) nitrate.
the correct equation for this reaction is:
A: Cu + SiN—> Si + Cu2N
B: 2Cu + AgNO3–> Ag +
Cu(NO3)2
C: Cu + 2 AgNO3–> Ag + Cu(NO3)2
D:Cu + AgNO3–> Ag + CuNO3
Answer:
Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
Explanation:
The reactants are:
Copper metal = Cu
Silver nitrate = AgNO₃
The products are:
Silver metal = Ag
Copper (II) nitrate = Cu(NO₃)₂
So, the reaction equation is given as;
Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
This is a single displacement reaction
Based on the molecular formula, determine whether each of the following is an alkane, alkene, or alkyne. (Assume that the hydrocarbons are noncyclical and there is no more than one multiple bond.)
a. C3H6
b. C6H12
c. H8H18
d. C7H12
Answer:
C₃H₆ is an alkene
C₆H₁₂ is an alkene
C₈H₁₈ is an alkane
C₇H₁₂ is an alkyne
Explanation:
To determine which of the compound is alkane, alkene, or alkyne,we shall use the general formula of alkane, alkene, and alkyne. This is illustrated below:
General formula for alkane => CₙH₂ₙ₊₂
General formula for alkene => CₙH₂ₙ
General formula for alkyne => CₙH₂ₙ₋₂
For C₃H₆:
n = 3
Alkane => CₙH₂ₙ₊₂ => C₃H₂₍₃₎₊₂ => C₃H₈
Alkene => CₙH₂ₙ => C₃H₂₍₃₎ => C₃H₆
Alkyne => CₙH₂ₙ₋₂ => C₃H₂₍₃₎₋₂ => C₃H₄
Thus, C₃H₆ is an alkene
For C₆H₁₂:
n = 6
Alkane => CₙH₂ₙ₊₂ => C₆H₂₍₆₎₊₂ =>C₆H₁₄
Alkene => CₙH₂ₙ => C₆H₂₍₆₎ => C₆H₁₂
Alkyne => CₙH₂ₙ₋₂ => C₆H₂₍₆₎₋₂ => C₆H₁₀
Thus, C₆H₁₂ is an alkene
For C₈H₁₈:
n = 8
Alkane => CₙH₂ₙ₊₂ => C₈H₂₍₈₎₊₂ => C₈H₁₈
Alkene => CₙH₂ₙ => C₈H₂₍₈₎ => C₈H₁₆
Alkyne => CₙH₂ₙ₋₂ => C₈H₂₍₈₎₋₂ => C₈H₁₄
Thus, C₈H₁₈ is an alkane.
For C₇H₁₂:
n = 7
Alkane => CₙH₂ₙ₊₂ => C₇H₂₍₇₎₊₂ => C₇H₁₆
Alkene => CₙH₂ₙ => C₇H₂₍₇₎ => C₇H₁₄
Alkyne => CₙH₂ₙ₋₂ => C₇H₂₍₇₎₋₂ => C₇H₁₂
Thus, C₇H₁₂ is an alkyne.
SUMMARY:
C₃H₆ is an alkene
C₆H₁₂ is an alkene
C₈H₁₈ is an alkane
C₇H₁₂ is an alkyne