Bone age : 22,920 years
Further explanationGiven
Nt = 2.5 g C-14
No = 40 g
half-life = 5730 years
Required
time of decay
Solution
General formulas used in decay:
[tex]\large{\boxed{\bold{N_t=N_0(\dfrac{1}{2})^{t/t\frac{1}{2} }}}[/tex]
t = duration of decay
t 1/2 = half-life
N₀ = the number of initial radioactive atoms
Nt = the number of radioactive atoms left after decaying during T time
Input the value :
[tex]\tt 2.5=40.\dfrac{1}{2}^{t/5730}\\\\\dfrac{2.5}{40}=\dfrac{1}{2}^{t/5730}\\\\(\dfrac{1}{2})^4=\dfrac{1}{2}^{t/5730}\\\\4=t/5730\rightarrow t=22920~years[/tex]
5.6 g of Iron reacts with excess fluorine gas.
The mass of iron fluoride produced is 11.3 g
What is the formula of the iron fluoride?
Answer: FeF3 Iron(III) fluoride
Explanation: 5.6 g = 1/10 mole Fe
11.3-5.6g F = 5.7 = 3/10 mole F
Lithium diorganocopper (Gilman) reagents are prepared by treatment of an organolithium compound with copper(I) iodide. Decide what lithium diorganocopper (Gilman) reagent is needed to convert 1-bromopropane into propylcyclohexane. Draw the structure of the organolithium compound that is used to prepare Gilman.
Answer:
See explanation and image attached
Explanation:
The Gilman reagent is a lithium and copper (diorganocopper) reagent with a general formula R2CuLi. R is an alkyl or aryl group.
They are useful in the synthesis of alkanes because they react with organic halides to replace the halide group with an R group.
In this particular instance, we intend to synthesize propylcyclohexane. The structure of the lithium diorganocopper (Gilman) reagent required is shown in the image attached to this answer.
During a chemistry lab exercise, a student isolates a compound at STP. In her
lab report, she has identified it as an ionic compound. If it is an ionic compound, it
will likely have a _________boiling point and be a _______ at STP.
Choose the answer with the words in the correct order that complete the
passage.
A. high; liquid
B. low; gas
C. high; solid
D. low; solid
please answer asap thank you !! :)
Ionic compounds have a high boiling point and be a solid at STP.
What is ionic compound?Ionic compounds are those compounds which are formed due to high electrostatic attraction between cations and anions.
Ionic compounds are generally present in the solid state because of the presence of strong ionic bond. And due to this rigid structure boiling point of ionic compounds are very high as they want more energy to break their bonds.
Therefor, at standard temperature pressure (STP) ionic compounds will likely have a high boiling point and be a solid at STP.
To learn more about ionic compounds, visit below link:
https://brainly.com/question/11638999
Which best describes a hydrate?
A.) It has water molecules bonded directly to it.
B.) It lacks water molecules ik it’s crystal lattice.
C.) It lacks hydrogen and oxygen atoms, which make up water.
D.) It has water molecules incorporated into its crystal lattice.
if you start with 4.3 moles of NH3, how many moles of NANH2 can be produced
Explanation:
Mole ratio of NH3 to NaNH2 = 2 : 2.
Moles of NaNH2 produced
= 4.3mol * (2/2) = 4.3mol.
What is the difference between the structure of simple and complex carbohydrates?
Answer:
Simple carbs break down easier and contain sugars. Complex carbs contain starch and fiber.
Explanation:
Answer Image result for What is the difference between the structure of simple and complex carbohydrates?
Simple vs Complex Carbs. Carbohydrates are sugars that come in 2 main forms – simple and complex. This is also referred to as simple sugars and starches. The difference between a simple and complex carb is in how quickly it is digested and absorbed – as well as it's chemical structure.
What does CoH12O6 tell you about the glucose molecule?
Answer:
Glucose = C6H12O6
molecular mass = 6(12) + 12(1) + 6(16)
= 72 + 12 + 96
= 180 g
Explanation:
Glucose has a chemical formula of: C6H12O6 That means glucose is made of 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms. ... Glucose is produced during photosynthesis and acts as the fuel for many organisms.
onsider the iodination of salicylamide by sodium iodide and sodium hypochlorite via an electrophilic aromatic substitution to form iodo-salicylamide. Reaction scheme illustrating the iodination of salicylamide by sodium iodide and sodium hypochlorite via an electrophilic aromatic substitution to form iodo-salicylamide. Calculate the molar masses of the reactants and product. Report molar masses to 1 decimal place.
Answer:
The answer is "[tex]\bold{263 \ and \ 137.1 \frac{g}{ mol}}[/tex]".
Explanation:
The chemical formula for Salicylamide: [tex]C_7H_7NO_2[/tex]
[tex]\to (12.011 \ \frac{g}{mol} \times 7)+(1.008 \ \frac{g}{mol} \times 7)+(14.0067 \frac{g}{mol} \times 1)+(15.999 \frac{g}{mol} \times 2) \\\\\to (84.077 \ \frac{g}{mol} )+(7.056 \ \frac{g}{mol} )+(14.0067 \frac{g}{mol})+(31.998 \frac{g}{mol} ) \\\\\to (84.077 \ \frac{g}{mol} )+(7.056 \ \frac{g}{mol} )+(14.0067 \frac{g}{mol})+(31.998 \frac{g}{mol} ) \\\\ =137.1377 \approx 137.1\ \frac{g}{mol}[/tex]
The chemical formula of Iodosalicylamide:[tex]C_7H_6INO_2[/tex]
[tex]\to (12.011\frac{g}{mol}\times 7)+(1.008\frac{g}{mol}\times 6)+(126.904\frac{g}{mol}\times 1)+(14.0067\frac{g}{mol}\times 1)+(15.999\frac{g}{mol}\times 2) \\\\\to (84.077\frac{g}{mol})+(6.048\frac{g}{mol})+(126.904\frac{g}{mol})+(14.0067\frac{g}{mol})+(31.998\frac{g}{mol}) \\\\=263.0337 \approx 263.0\ \frac{g}{mol}[/tex]
explain the difference between aldehyde and ketones
Answer:
You will remember that the difference between an aldehyde and a ketone is the presence of a hydrogen atom attached to the carbon-oxygen double bond in the aldehyde. Ketones don't have that hydrogen. ... Aldehydes are easily oxidized by all sorts of different oxidizing agents: ketones are not.
In the picture below, ammonia and bleach are mixed together. How many nitrogen (N) atoms will be in the products?
1
ammonia: NH3 (one nitrogen)
bleach: NaOCl (zero nitrogen)
Geosmin is an aroma compound found in raindrops. It's chemical formula is C12H22O. The molar mass is 182 g/mol. If you perform combustion analysis of 1.77 grams of this compound, how many grams of carbon should be isolated as CO2 during the analysis?
Answer:
5.13 g of CO₂.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
C₁₂H₂₂O + 17O₂ —> 12CO₂ + 11H₂O
Next, we shall determine the mass of C₁₂H₂₂O that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of C₁₂H₂₂O = 182 g/mol.
Mass of C₁₂H₂₂O from the balanced equation = 1 × 182 = 182 g
Molar mass of CO₂ = 12 + (2×16)
= 12 + 32
= 44 g/mol
Mass of CO₂ from the balanced equation = 12 × 44 = 528 g
SUMMARY:
From the balanced equation above,
182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.
Finally, we shall determine the mass of CO₂ produced from the reaction. This can be obtained as follow:
From the balanced equation above,
182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.
Therefore, 1.77 g of C₁₂H₂₂O will react to produce = (1.77 × 528)/182 = 5.13 g of CO₂.
Thus, 5.13 g of CO₂ were obtained from the reaction.
Which types of energy transformations does a television make?
Electrical energy to energy of motion and heat energy
Electrical energy to heat energy and light energy
Electrical energy to sound energy and energy of motion
Electrical energy to sound energy and light energy
Answer:
d.
Explanation:
the electricity is why we can hear sounds from the television and see it
Police investigating the scene of a sexual assault recover a large blanket that they believe may contain useful physical evidence. They take it to the laboratory of forensic serologist Scott Alden, asking him to test it for the presence of semen. Noticing faint pink stains on the blanket, Scott asks the investigating detective if he is aware of anything that might recently have been spilled on the blanket. The detective reports that an overturned bowl of grapes and watermelon was found at the scene, as well as a broken glass that had contained wine. After the detective departs, Scott chooses and administers what he considers the best test for analysing the piece of evidence in his possession. Three minutes after completion of the test, the blanket shows a positive reaction. What test did Scott choose, and what was his conclusion? Explain your answer.
Answer:
Acid Phosphatase (AP) Test
Explanation:
Acid phosphate is an enzyme that is found in the body. It is secreted majorly by the prostrate gland into the seminal fluid. The acid phosphatase test is used to test for the presence of semen in items.
Scott chose the acid phosphatase test because it is very useful in testing for semen on large items such as blankets. The reaction time for an acid phosphatase test for semen is less than 30 seconds. Seeing that the test was completed in three minutes, Scott concluded that the positive reaction was as a result of some other fluid.
The detectives reported that an overturned bowl of grapes and watermelon was found at the scene as well as a broken glass that had contained wine. Scott knew that some fruit juices like that of watermelon give a positive reaction to the acid phosphatase test but with more time that of the semen fluid because the reaction is a very slow one.
Scott concluded that there was no presence of semen on the blanket and therefore there was no sexual assault.
A sample of compound A (a clear, colorless gas) is analyzed and found to contain 4.27g carbon and 5.69g oxygen. A sample of compound B (also a clear, colorless gas) is analyzed and found to contain 5.19g carbon and 13.84g oxygen. Are these data an example of the law of definite proportions, the law of multiple proportions, or neither? What do these data tell you about substances A and B?
Answer:
law of multiple proportions
Explanation:
The law of multiple proportions states that, if two elements A and B, combine to form more than one chemical compound. Then the various masses of one element A, which combine separately with a fixed mass of element B are in simple multiple ratio.
We can see that the ratio of oxygen that combines with carbon in the two compounds( A and B) is 1:2. This demonstrates the law of multiple proportions.
The substances A and B must be CO and CO2 respectively.
What is made when a salt is dissolved in water?
Answer:
water
Explanation:
the salt dissapears and turns
into vapor
Answer:
A solution is made when a solid (which we call a solute) dissolves into a liquid (that we call the solvent) one example of a solution is salt dissolved in water. The salt and water can be separated again by evaporation (the water will evaporate if left in a got place leaving the salt behind. I don't know if that was the answer that you were looking for
Which of the following notations represents an alpha particle?
A. 2 He
C.B+
В. В
D. Y
Answer:
A. 2 He
Explanation:
The notation of an alpha particle is depicted as:
₂He
An alpha particles is a nucleus of 2 protons and 2 neutrons. So it is actually a Helium cation.
Alpha particles are monoenergetic and they mostly have discrete energy.
So, the mass number of the particle is 4 and atomic number is 2
If 1 teaspoons of vinegar are equivalent in 60 drops. How many drops of vinegar are there in
1 ½ teaspoons?
Answer:
90 drops
Explanation:
1 teaspoon = 60 drops
Half a teaspoon = 60 ÷ 2 = 30 drops
1 and a half = 60 + 30 = 90
A student reacts 13 moles of iron with 21 moles of oxygen according to the following equation:
4Fe(s) + 3O2(g) +2Fe2O3(s)
How many moles of iron(III) oxide will the reaction produce?
a
34 moles
b
13 moles
c
6.5 moles
d
44 moles
Answer:
Explanation:
C
The limiting reactant in this reaction is Fe. 4 moles of Fe gives 2 moles of ferric oxide. Hence, 13 moles of Fe will give 6.5 moles of iron (iii)oxide.
What is limiting reactant ?The reactant which is not sufficient in amount determines the yield of the reaction and it is called the limiting reactant of the reaction.
In the given reaction, 4 moles of iron reacts with 3 moles of oxygen to give 2 moles of iron oxide.
given , no.of moles of oxygen gas present in the sample = 21 moles
no.of moles of Fe = 13 moles.
Here, 28 moles of Fe is needed to react with 21 moles of oxygen. Hence, Fe is the limiting reactant.
4 moles of Fe gives 2 moles of iron (III)oxide. Hence, number of moles of the product , formed from 13 moles of Fe is calculated as follows:
(13 moles ×2 moles)/4moles = 6.5m moles
Therefore, 6.5 moles of iron (III)oxide is formed from 13 moles of Fe.
Find more on limiting reactant :
https://brainly.com/question/2948214
#SPJ6
Consider a disubstituted aromatic compound. The parent name is benzene and there is a chloro and bromo substituent. Disubstituted benzenes can be described using the terms ortho, meta and para, depending on their relative distance from each other. The terms are often just abbreviated as o, m and p. In addition, the IUPAC name can use locant numbers instead of the descriptor. Br
Select the correct names for the structure.
1. 1-bromo-3-chlorobenzene
2. 3-bromo-1-chlorobenzene
3. meta-bromochlorobenzene
4. o-bromochlorobenzene
5. ortho-bromochlorobenzene
6. m-bromochlorobenzene
Answer:The correct names for the structure are:
--> 1. 1-bromo-3-chlorobenzene.
--> 3. meta-bromochlorobenzene.
--> 6. m-bromochlorobenzene.
Explanation:
Benzene is the simplest member of the aromatic hydrocarbons. It has a ring structure consisting of six carbon and six hydrogen atoms. This equally means that a benzene can have up to six substituents. One of the chemical properties is that benzene and other members of its series undergo substitution reaction whereby one or more of its six hydrogen atoms is replaced by monoatomic reagents.
Disubstituted benzene consists of two substituents which are described based on either numerical locants or specific words for the three possible forms.
The numerical locant method are used the same naming substitutes of other hydrocarbons. From the question, the numerical locant method was derived through using the following steps:
--> the functional group is benzene
--> there are two substituents which includes bromine( written as bromo) and chlorine ( written as chloro)
--> while placing the number, it's done alphabetically ('1-bromo' comes before '3-chloro') in a clockwise manner. This is to give chorine the lowest locant number.
The second naming method for a disubstituted benzene is the the ortho-, meta-, para- (or their singel letter equivalent) nomenclature method. This is only used for benzene structures.
--> ortho or O : this is used when the substituents are close to each other in the benzene ring.
--> meta or (m) : This is used when the substituents are separated by one carbon in the benzene ring.
--> para or (p): This is used when the substituents are across each other in the benzene ring
From the question, the bromine substituent is separated from the chlorine by one carbon atom, therefore it's meta-bromochlorobenzene or m-bromochlorobenzene.
Don’t skip please!!! I need help
Given
Atomic symbol
Required
Atomic composition
Solution
Atomic number = number of protons = number of electrons
Mass Number (A) is the sum of protons and neutrons
Number of protons and Number of Neutrons in nucleus
Number of electrons in the shell
From the picture:
protons = 3
neutrons = 4
electrons = 3
atomic number = protons = electrons = 3
mass number = protons + neutrons = 3+4 = 7
It’s a simple question in Welding when you use a torch if you add a lot of oxygen to the fuel what happens does it burn faster or what I want to know
Answer:
Easy, the flame is smaller but burns hotter.
Explanation:
Define the following Vocabulary words
1. Archae Bacteria
2. Bacteria
3. Eukarya Kingdom
4. Domain
List 5 things that were made possible because of the use of microscope
Answer:
the invention of the microscope has made seeing bacteria/cells, examining forensic evidence (such as fingerprints), studying atomic structure, tissue analysis, and the study of our ecosystem possible to the naked eye
Explanation:
hope this helps
Looking at the following equation, which is the correct order of coefficients?
NH3 + O2 --> NO + H2O
Answer: The correct order of coefficients is 4, 5, 4 and 6.
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical equation is:
[tex]4NH_3+5O_2\rightarrow 4NO+6H_2O[/tex]
The correct order of coefficients is 4, 5, 4 and 6.
what do you think will happen if there is no coal.
Answer:
If coal and petroleum will get exhausted it will be very difficult for us to transport because most vehicles depends on petroleum, Transport on Earth will became complicated, and if coal will get exhausted we will lose an unique fossil fuel. Coal is used in various domestic and industrial purposes.
what happens when you continue to add a solute to an already saturated solution
Answer: nothing. It remains undissolved
Explanation: saturated = dissolved as much solute as solvent can contain
Why is one side of the moon called "the dark side of the moon"?
Answer:
Option C
Explanation:
The answer is option C or "The amount of time it takes to rotate around it's axis is the same amount of time it takes to revolve around Earth."Remember that the Earth and the Moons amount of time to make a full rotation is almost in sync and they're two sides of the moon, one side we do not see and that's because that side is currently faced away from the Earth which is called the dark side of the moon. Each side has two weeks oh night, and two weeks of day because of how long it takes the moon to revolve, so while we have a side towards the Earth which is illuminated by the sun we have another pointing away in the dark.
Hope this helps.
In a disproportionation reaction, the disproportionate substance
A. has exactly one oxidation state.
B. has exactly two oxidation states.
C. has at least three oxidation states.
D. has either one or two oxidation states.
Answer:
The answer is C: has at least three oxidation states.
Explanation:
you're welcome
Answer:
C
Explanation:
got it right on Edge
Which of these is smallest?
cells
atoms
matter
elements
Answer:
atoms
Explanation:
i hope that help you
Answer:
atoms
Explanation:
Hurry I need Now!!!In which biome would the climax species be reached most quickly following a fire?
A Taiga
B desert
C Grassland
D. deciduous forest
E tropical rain forest
Answer:
D. Deciduous Forest.
Explanation: