Answer:
c. The particle is moving in a positive direction, and its speed is decreasing.
Answer:
d. The particle is moving in the negative direction, and its speed is decreasing
Explanation:
What is the tangential velocity of a record player which makes 11 revolutions in 20 seconds?
Velocity is defined as rate of change of displacement wit respect to time.
tangential velocity is (11/10)πr , where r is radius of circular track.
Since, tangential velocity is, [tex]=\frac{distance}{time}[/tex]
In one revolution, distance travelled is circumference of circular track.
If radius of circular track is r , then distance travelled in one revolution is, = 2πr
So, 11 revolutions = 11(2πr) = 22πr
Time taken = 20 second
So, tangential velocity = 22πr/20 = (11/10)πr meter per second.
Learn more:
https://brainly.com/question/14401457
a traveller covers 1.2km distance in 5mins find it's average velocity
Explanation:
Average Velocity = Displacement / Time
= 1.2km / 5 min
= 1200m / 300s
= 4m/s.
The average velocity of a moving body is the distance covered by time. The average velocity of the traveler covers 1.2 km in 5 min is 4 m/s.
What is velocity ?Velocity is a physical quantity which measures the distance travelled per unit time. Velocity is a vector quantity thus having both magnitude and direction.
Velocity is the ratio of distance to the time. Given that the distance travelled by the man = 1.2 km = 1200 m
time = 5 min = (5 × 60 s) = 300 s.
Thus, velocity = distance/ time
= 1200 m / 300 s
= 4 m/s.
Therefore, the velocity of the traveler is 4 m/s.
To find more on velocity, refer here:
https://brainly.com/question/18084516
#SPJ2
Do you think the inner planets should be explored or should the money be spent on other things? Justify your opinion.
Answer:
yes i think that inner planets should be explored because if we ever find new life or are able to live there then i think its worth takeing a risk.
Explanation:
What does this same experiment( the picture) tell you about light waves? Explain.
A plane lands and comes to a complete stop. If the plane covers 200 m and decelerates at 7.5 m/s2 , what was the planes initial velocity as it touched the runway?
Answer:
The initial velocity of the plane is 54.77 m/s
Explanation:
Given;
distance covered by the plane, d = 200 m
deceleration of the plane, a = - 7.5 m/s²
The initial velocity of the plane is given by the following kinematic equation;
v² = u² + 2ad
where;
v is the final velocity of the plane when the plane comes to a complete stop = 0
u is the initial velocity of the plane
0 = u² + 2(-7.5 x 200)
0 = u² - 3000
u² = 3000
u = √3000
u = 54.77 m/s
Therefore, the initial velocity of the plane is 54.77 m/s
how the number of batteries and the number of coils of wire affect the strength of an electromagnet.
marcus is on a merry-go-round holding a string. you are standing next to him and holding the other end of the string so that the string forms a tangent line to the edge of the merry-go-round. if marcus is 2 meters from the center of the ride, what torque are you applying on him if you pull 30 N? _Nm
Answer: 60 nm
Multiply 30 and 2
Incident ray X passes parallel to the principal axis of a concave lens. Incident ray Y passes parallel to the principal axis of a convex lens.
How do the rays behave differently after passing through each lens?
Ray X continues moving in the same direction, and ray Y refracts and passes through the focal point located behind the lens.
Both rays refract and move as though they passed through the focal point.
Ray X appears as though it passed through the focal point in front of the lens, and ray Y passes through the focal point on the other side of the lens.
Both rays continue moving in the same direction.
Answer:
Explanation:
It would be option C. Ray x appears as though it passed through the focal point in front of the lens, and ray Y passes through the focal point on the other side of the lens.
Answer:
c. Ray X appears as though it passed through the focal point in front of the lens, and ray Y passes through the focal point on the other side of the lens.
Explanation:
Need help can someone tell what each circuit is
Answer:
In geometry, parallel lines are lines in a plane which do not meet; that is, two straight lines in a plane that do not intersect at any point are said to be parallel. Colloquially, curves that do not touch each other or intersect and keep a fixed minimum distance are said to be parallel.
In a series circuit, the current that flows through each of the components is the same, and the voltage across the circuit is the sum of the individual voltage drops across each component. ... In a series circuit, every device must function for the circuit to be complete.
In a series circuit, all components are connected end-to-end, forming a single path for current flow. In a parallel circuit, all components are connected across each other, forming exactly two sets of electrically common points.
Explanation:
I hope these helps^,^ ^_^
Block on inclined plane experience a force due to gravity of 300N straight down. If the slope is inclined at 67.8°to the horizontal. What is the component of the force due to gravity perpendicular and parallel to the slope?
Answer:
The component of the force due to gravity perpendicular and parallel to the slope is 113.4 N and 277.8 N respectively.
Explanation:
Force is any cause capable of modifying the state of motion or rest of a body or of producing a deformation in it. Any force can be decomposed into two vectors, so that the sum of both vectors matches the vector before decomposing. The decomposition of a force into its components can be done in any direction.
Taking into account the simple trigonometric relations, such as sine, cosine and tangent, the value of their components and the value of the angle of application, then the parallel and perpendicular components will be:
Fparallel = F*sinα =300 N*sin 67.8° =300 N*0.926⇒ Fparallel =277.8 N Fperpendicular = F*cosα = 300 N*cos 67.8° = 300 N*0.378 ⇒ Fperpendicular= 113.4 NThe component of the force due to gravity perpendicular and parallel to the slope is 113.4 N and 277.8 N respectively.
State two devices that transfer heat out of a cool environment into a warm environment
Answer:
Heat pump
Refrigerators
Explanation:
Some devices like heat pump and refrigerators used transfers of thermal energy in a cool region to warm other region.
These types of devices used for transferring heat energy by thermal conduction method.
When is the object traveling at a constant velocity?
A
B
C
D
It is moving at a constant velocity the entire time
d
I think the most common way of doing it was for the first
explain the universal law of gravity and it's calculate from as well as the value of g
Answer:
According to the Newton's law of gravitational every object in the universe attracts every other objects with a force which is called gravitational force.This gravitational force is (i) directly proportional to the product of their masses and (ii) inversely proportional to the square of the distance between their centres.
Explanation:
Newton's law of gravitational is called the universal law because it is applicable to all the bodies either terrestrial or celestial having any shape,size,mass or at any distance apart with any medium between them,at any time(past,present or future).
Birdman is flying horizontally at a
speed of 40 m/s and a height of 58
m. Birdman releases a turd directly
above the start of the field. How far
from the start of the field should the
robot hold the bucket to catch the
turd?
Answer:
The robot should hold the bucket at 137.6 m from the start of the field
Explanation:
Horizontal Motion
When an object is launched horizontally with a speed v from a height h, it describes a curved path exclusively ruled by gravity until it eventually hits the ground.
The range or maximum horizontal distance d traveled by the object can be calculated as follows:
[tex]\displaystyle d=v\cdot\sqrt{\frac {2h}{g}}[/tex]
Birdman flies horizontally at a speed of v=40 m/s and a height of h=58 m. He releases a turd above the start of the field. If the robot was exactly down Birdman, then it won't catch the turd with the bucket because it would land farther away by a distance equal to the range. Thus:
[tex]\displaystyle d=40\cdot\sqrt{\frac {2*58}{9.8}}[/tex]
[tex]\displaystyle d=40\cdot\sqrt{11.84}[/tex]
d = 137.6 m
The robot should hold the bucket at 137.6 m from the start of the field
can you answer the b. thanks
Answer:
current going into a junction in a circuit is EQUAL TO the current comming out of the junction.
Explanation:
Krichhoff's Current Law
Kirchhoff's current law (1st Law) states that current flowing into a node (or a junction) must be equal to current flowing out of it.
the fall of a body on the earth's surface cannot be a complete free fall why ?
Explanation:
because the boy has larger surface area due to which he offers the larger air resistance which decreases the acceleration so, he will fall towards the earth's surface approximately with constant velocity.
Yuna is writing an opinion piece about her Schools lunch menu which text structure would best Express her ideas check all that apply
Answer:
Cause and effect, problem and solution, order of importance, comparison and contrast.
Explanation:
A hot air balloon holds 7.40 x 107 liters of gas. In order for the hot air balloon to rise into the sky, it must be heated to 120°C. Once the balloon is up in the air, the air needs to be cooled in order for the balloon to land. If the temperature of the balloon is decreased to 40.0°C, what will the new volume of the gas be?
Remember to pay close attention to the units of temperature before beginning your calculations.
Answer:
2.467×10^7 litres
Explanation:
Using the formula V1/T1 = V2/T2
V1 and V2 are the initial and final volume respectively
T1 and T2 are their respective temperatures
Given
V1 = 7.4×10^7litres
T1 = 120°C
T2 = 40°C
Required
V2
From the formula
V2 = V1T2/T1
V2 = 7.4×10^7(40)/120
V2 = (7.4×10^7)/3
V2 = 2.467×10^7 litres
Hence the new volume of the gas will be 2.467×10^7 litres
A steel rod has a diameter of 3.75cm.Express it's diameter in millimeters and meter
Answer:
3.75cm into millimetres
= 3.75 * 10
37.5 millimetres
3.75 cm into metres
3.75/100
= 0.0375m
You go to the store and buy 3 apples. Each apple has a mass of 4.66 grams. What is the total mass of apples you bought.
Remember the difference between a counted and a measured number.
NEEP HELP!
Taking Finals
its 13.98. it's simple multiplication 3* 4.66= 13.98
Answer the following
1) A piece of gold weighis 240 g and has a volume of 20 cm^3. Find the density of gold.
2) What is the perpendicular distance between the force and the turning point if a force
of 25 N produces a moment of force of 12.5 Nm
pls answer fast I will mark as brainlist
Answer:
1. 12 g/cm³
2. 0.5 m
Explanation:
1.
The weight of the gold is 240 g
The volume is 20 cm³
Density = Mass/ volume
Density = 240 / 20 = 12 g/cm³
2.
The formula for moment of a force is ;
Force * distance perpendicular between force and the turning point of force
Given that the moment of force is 12.5 Nm and force is 25 N then the perpendicular distance between the force and the turning point will be;
12.5 = 25 * d
12.5/25 = d
0.5 = d
d= 0.5 m
A 50 kg circus worker stands on a merry go round platform. If the worker's acceleration is 2.5 m/s2, what is her centripetal force?
F = ma
= 50kg × 2.5 m/s²
= 125 N
Answer : 125N
Explanation :
F = Force (N)
m = mass (kg)
a = acceleration (m/s²)
HELPPP MEE!!
A mover slides a refrigerator weighing 650 N at a constant velocity across the floor a distance of 8.1 m. The force of friction between the refrigerator and the floor is 230
N. Calculate the coefficient of friction between the floor & refrigerator.
Answer: The coefficient of friction is 0.35
Explanation:
We can write the friction force as:
F = N*μ
Where N is the normal force between the refrigerator and the ground, as the full weight of the refrigerator is acting on the ground, the normal force will be exactly equal to the weight of the refrigerator, then:
N = 650N
And μ is the coefficient of friction.
And for this case, the force is 230N, then we have:
F = N*μ
230N = 650N*μ
(230N/650N) = μ = 0.35
Notice that the distance did not matter for this calculation.
---Spring Question---
A 0.84 kg ball is held at rest against a spring (k = 142 N/m) that has been compressed 0.06 m. The ball and spring are on a table and the ball is 2.0 m above the ground. If friction between the ball and the table is negligible, then how far from the edge of the table (in meters) will the ball hit the ground?
Answer:
The distance from the edge of the table at which the ball will hit the ground is approximately 0.49 meters
Explanation:
The mass of the ball = 0.84 kg
The spring constant k = 142 N/m
The compression of the spring = 0.06
Therefore, by conservation of energy, we have;
The potential energy of the spring = The kinetic energy given to the ball
The potential energy of the spring = 1/2 × k × x² = 1/2 × 142 × 0.06² = 0.2556
The potential energy of the spring = 0.2556 J
The kinetic energy given to the ball = 1/2 × m × v²
Where;
v = The final velocity of the ball
Substituting gives;
1/2 × 0.84 × v² = 0.2556
∴ v = √(0.2556/(1/2 × 0.84)) ≈ 0.78
The final velocity of the ball = v ≈ 0.78 m/s
The height of the ball above the ground, h = 2.0 m
Therefore, we have;
The time, t, it takes the ball to touch the ground from the 2.0 m height, h, is given as follows;
h = 1/2·g·t²
t = √(2·h/g)
Where;
g = The acceleration due to gravity = 9.81 m/s²
∴ By substitution, we have;
t = √(2 × 2/9.81) ≈ 0.63855
t ≈ 0.63855 s
The distance from the edge of the table at which the ball will hit the ground = The horizontal distance covered during before the ball hits the ground
The horizontal distance covered during before the ball hits the ground = The (horizontal) velocity of the ball × The time it takes the ball to touch the ground
∴ The horizontal distance covered during before the ball hits the ground = 0.78 × 0.62855 ≈ 0.490269 ≈ 0.49
The distance from the edge of the table at which the ball will hit the ground = The horizontal distance covered during before the ball hits the ground ≈ 0.49 m
Beth moves a 15 N book 20 meters in 10 seconds. How much power was produced?
Answer:
30 Watts
Explanation:
Power = Work/Time
Work = Force*Distance
Power = Force * Distance / Time
Power = 15 N * 20 meters / 10 sec
Power = 30 Watts
You are standing on a moving bus, facing forward, and you suddenly fall forward. You can imply form this that the bus’s
As you enter the lab, you find two bottles labeled "concentrated ammonium phosphate." In one paragraph, using your own words, describe the steps you could take to change one of the bottles into a diluted solution, and one of the bottles into a saturated solution.
Answer:
Butane is a four member carbon chain.
The properties of butane are as follows.
Butane is less denser than water.
In the presence of air, it readily burns to form water vapour and carbon dioxide. The reaction is as follows.
It has a boiling point of .
Butane has faint petroleum like odor.
Butane does not react with water.
Butane has weak dispersion force and water has strong hydrogen bonding. The weak dispersion force is unable to break the hydrogen bonding hence, butane does not dissolve in water.
Thus, we can conclude that the chemical properties butane burns readily in air and does not react with water are true out of the given list of options.
Explanation:
The external stimulus (what causes the stress) NEED HELP ASAP
Answer:
Some examples of external stressors include:
Major life changes. These changes can be positive, such as a new marriage, a planned pregnancy, a promotion or a new house. ...
Environment. The input from the world around us can be a source of stress. ...
Unpredictable events.
Workplace.
Social.
Explanation:
Determine the energy lost, due to friction, as an 8000 N car that skids to a stop, if its initial velocity was 12 m/s.
Answer:
58,800Joules
Explanation:
The energy lost is equal to the workdone by the car as it skids.
Workdone = Force * Distance
Given
Force = 8000N
Get the distance using the equation of motion
v² = u² - 2gS
0² = 12² - 2(9.8)S
-12² = - 2(9.8)S
-144 = -19.6S
S = 144/19.6
S = 7.35m
Calculate the required energy
Workdone = 8000 * 7.35
Workdone = 58,800Joules
Hence the energy lost due to friction is 58,800Joules
For an object to have potential energy it must be...?
A) At rest
B) Light weight
C) Moving
D) Elevated (height)
Please I need help, thank you!