PLEASE HELP! I'LL GIVE BRAINLEST​

Answer:

ωf = 113.95 rev/s

t = 1.26 s

Explanation:

We can use the third equation of motion to find out the final spinning speed of the wheel:

[tex]2\alpha \theta = \omega_f^2 -\omega_i^2\\[/tex]

where,

α = angular acceleration = 65 rev/s²

θ = No. of revolutions completed = 92 rev

ωf = final angular speed = ?

ωi = initial angular speed = 32 rev/s

Therefore,

[tex](2)(65\ rev/s^2)(92\ rev) = \omega_f^2 - (32\ rev/s)^2\\\omega_f^2 = 11960\ rev^2/s^2 + 1024\ rev^2/s^2\\\omega_f = \sqrt{12984\ rev^2/s^2}[/tex]

ωf = 113.95 rev/s

Now, for the time we can use the first equation of motion:

[tex]\omega_f = \omega_i +\alpha t\\113.95\ rev/s - 32\ rev/s = (65\ rev/s^2)t\\t = \frac{81.95\ rev/s}{65\ rev/s^2}\\\\[/tex]

t = 1.26 s

Answer:

Current in resistors = 1.5 amp

Current in resistors = 0.18 amp

P = 93.75 watts

Explanation:

Given:

1. Three 5 ohm resistor(series)

Voltage = 10 volt

2. Three 5 ohm resistor(parallel)

Voltage = 9 volt

3. Three 5 ohm resistor(series)

Voltage = 6 volt

Find:

Current in resistors

Current in resistors

Total power of circuit

Computation:

1. Total resistor (Series) R = R1 + R2 + R3

Total resistor (Series) R = 5 + 5 + 5

Total resistor (Series) R = 15 ohm

I = V/R

Current in resistors = (15)/(10)

Current in resistors = 1.5 amp

2. Total resistor (Series) R = 1/[1/R1 + 1/R2 + 1/R3

Total resistor (Series) R = 1[1/5 + 1/5 + 1/5]

Total resistor (Series) R = 1.67 ohm

I = V/R

Current in resistors = (1.67)/(9)

Current in resistors = 0.18 amp

3. Total resistor (Series) R = R1 + R2 + R3

Total resistor (Series) R = 5 + 5 + 5

Total resistor (Series) R = 15 ohm

I = V/R

I = (15)/(6)

I = 2.5 amp

P = I²(R)

P = (2.5)²(15)

P = 93.75 watts

Answer:

Explanation:

The investigation is on differences between light waves and sound waves. Because the light and sound are transmitted at a 30° angle at a capsule with glass and vacuum, questions asked should show difference answers for light and sound.

First and third question talk about liquid which is not related here.

Fouth and sixth prediction are wrong as electromagnetic wave will not slow down or speed up in vacuum.

That leaves the second and fifth set as correct answers:

question: How are electromagnetic waves and mechanical waves affected when traveling from a solid glass medium to a vacuum?

prediction: The electromagnetic waves will continue through the vacuum, while the mechanical waves will go no farther.

question: How is the speed of electromagnetic waves affected when traveling from a solid glass medium to a vacuum at a 30° angle?

prediction: The electromagnetic waves will travel in a straight line, showing that they have maintained a constant speed.

Answer:

The two questions and predictions are:

question: How are electromagnetic waves and mechanical waves affected when traveling from a solid glass medium to a vacuum?

prediction: The electromagnetic waves will continue through the vacuum, while the mechanical waves will go no farther.

question: How is the speed of electromagnetic waves affected when traveling from a solid glass medium to a vacuum at a 30° angle?

prediction: The electromagnetic waves will travel in a straight line, showing that they have maintained a constant speed.

Explanation:

light is EM wave which is transverse while sound is longitudinal. speed changes for long wave but not EM.

Answer:

B

Explanation:

The Lorentz force is the sum of the electric force and magnetic force.

F = qE + qvB

qE represents electric force and qvB represents magnetic force

Answer:

a)   v = 0.9167 m / s,  b)  A = 0.350 m,  c)  v = 0.9167 m / s, d)  A = 0.250 m

Explanation:

a) to find the velocity of the wave let us use the relation

          v = λ f

the wavelength is the length that is needed for a complete wave, in this case x = 5.50 m corresponds to a wavelength

           λ = x

           λ = x

the period is the time for the wave to repeat itself, in this case t = 3.00 s corresponds to half a period

          T / 2 = t

           T = 2t

period and frequency are related

           f = 1 / T

           f = 1 / 2t

we substitute

           v = x / 2t

           v = 5.50 / 2 3

           v = 0.9167 m / s

b) the amplitude is the distance from a maximum to zero

          2A = y

           A = y / 2

           A = 0.700 / 2

           A = 0.350 m

c) The horizontal speed of the traveling wave (waves) is independent of the vertical oscillation of the particles, therefore the speed is the same

      v = 0.9167 m / s

d) the amplitude is

           A = 0.500 / 2

           A = 0.250 m

Answer:

Explanation:

I jus did it on usatestprep

Answer:

C. The change of internal energy of a system is the sum of work and heat spent on it.

Explanation:

The law of conservation of Energy states that energy cannot be destroyed but can only be converted or transformed from one form to another. Therefore, the sum of the initial kinetic energy and potential energy is equal to the sum of the final kinetic energy and potential energy.

Mathematically, it is given by the formula;

Ki + Ui = Kf + Uf .......equation 1

Where;

Ki and Kf are the initial and final kinetic energy respectively.

Ui and Uf are the initial and final potential energy respectively.

The law of conservation of Energy is another way to describe the law of Thermodynamics. It states that the change of internal energy of a system is the sum of work and heat spent on it.

Mathematically, it is given by the formula;

ΔU = Q − W

Where;

ΔU represents the change in internal energy of a system.

Q represents the net heat transfer in and out of the system.

W represents the sum of work (net work) done on or by the system.

Answer:

it's A subduction, deep water trench

Answer:

A. It has mostly kinetic energy

Explanation:

Kinetic energy refers to movement. Potential energy refers to height. In this case, the big drop just got over. So, when the coaster is at the bottom, it has more kinetic than potential energy . Potential energy is still present but kinetic is more at the bottom.

Answer:

Weight is a measure of the force of gravity pulling down on an object. It depends on the object's mass and the acceleration due to gravity, which is 9.8 m/s2 on Earth. The formula for calculating weight is F = m × 9.8 m/s2, where F is the object's weight in Newtons (N) and m is the object's mass in kilograms.

Answer:

10

Explanation:

lyezurzup?y?ur if fk kgs7rsjzkgzitz

Answer:

Yes, it would make it back up.

Explanation:

If it has 100,000 Joules of gravitational potential energy at the top of the hill, by the time the cart gets to the bottom, it will become PE = 0, KE = 90,000 since 10% of 100,000 is 10,000. The cart only requires 80,000J to climb back up so it should easily do so.

I didn't quite understand if the 10% energy loss is total, or every time it goes up or down, but it isn't a problem because 10% of 90,000 is 9,000, which means it would have 81,000J of energy on the way back up IF it loses energy due to friction on the way back up also.

The only physical law you need to prove this is the Law of Conservation of Energy: no energy is lost, only transformed; 10% of the energy becomes heat, the rest remains mechanical energy, which is the reason why the reasoning above works.

Answer:

1st and 2nd

Explanation:

Answer:

An axis is an invisible line around which an object rotates, or spins. The points where an axis intersects with an object's surface are the object's North and South Poles.

The index of refraction is 1.33.

To find the answer, we need to know about index of refraction.

What is index of refraction?

What is the mathematical expression of refractive index?

n= sin∅₁ / sin∅₂

where, ∅₁= angle of incident

             ∅₂= angle of refraction

What is the refractive index,  if the angle of incidence in air is 40 degrees and the angle of refraction is 29 degrees?

Thus, we can conclude that the index of refraction is 1.33.

Learn more about refractive index here:

https://brainly.com/question/83184

#SPJ2

Answer:

Any food made from wheat, rice, oats, cornmeal, barley, or another cereal grain is a grain product. Anything else is not

Explanation:

Answer:

D

Explanation:

This will not change the weight and therefore not change the inertia

A dump truck contains a load of soil. The action that will leave the dump truck's inertia unchanged is that increase the force applied by the engine. Hence, option D is correct.

A body's ability to resist being propelled into motion or, if already moving, to modify the direction or magnitude of its velocity is known as inertia.

An object's lethargy is a passive quality that prevents it from doing anything other than obstructing active forces and torques. The only reason a moving body continues to move is the lack of a force that might slow it down, alter its trajectory, or accelerate it. This is not due to inertia.

A body's inertia moment about a certain axis and its mass, which determine how resistant it is to the application of forces to that axis, respectively, are two statistical measures of inertia.

To know more about Inertia:

https://brainly.com/question/3268780

#SPJ2

Answer:

[tex]0.886[/tex] N buoyant force is exerted by air

Explanation:

My weight is [tex]75[/tex] Kg

Weight = mass * gravity

As we know

Buoyant Force is equal to the product of density * acceleration due to gravity and volume of the body

Assuming weight density is a bit less than that of water or equal to water i.e [tex]997.77[/tex] kg/m3

Volume is equal to mass / density

[tex]= 75[/tex] Kg * g/[tex]997.777[/tex]

[tex]= 0.0751[/tex] * g

Buoyant Force

= Volume * g * density

[tex]= 0.0751 * 9.8 * 1.2041[/tex]kg/m3

[tex]= 0.886[/tex] N

Answer:

A) Cold object will start getting hot

B) Heat exchange will stop as the two object acquire the same temperature.

Explanation:

A) When one hot object and one cold object are kept in contact then the heat is transferred from the hot object to the cold object via different modes of heat transmission. Hence, the cold object starts getting hot

B) The transmission of heat from the hot object to the cold object will stop as the temperature of the two object becomes equal to each other.

The pencil is clearly an opaque object because we cannot see through it and therefore forms a shadow.

Answer:

2260

gimme brainliest rn

Answer:

[tex]\frac{T_t}{T_c} = 1.32[/tex]

Explanation:

The torque applied on an object can be calculated by the following formula:

[tex]T = Fr[/tex]

where,

T = Torque

F = Applied Force

r = radius of the wheel

For car wheel:

[tex]T_c = Fr_c\\[/tex]

For truck wheel:

[tex]T_t = Fr_t[/tex]

Dividing both:

[tex]\frac{T_t}{T_c} = \frac{Fr_t}{Fr_c}[/tex]

for the same force applied on both wheels:

[tex]\frac{T_t}{T_c} = \frac{r_t}{r_c} \\[/tex]

where,

rt = radius of the truck steering wheel = 0.25 m

rc = radius of the car steering wheel = 0.19 m

Therefore,

[tex]\frac{T_t}{T_c} = \frac{0.25\ m}{0.19\ m} \\[/tex]

[tex]\frac{T_t}{T_c} = 1.32[/tex]

Answer:

I think its d

Explanation:

I'm not sure I'm sorry if I'm wrong

Answer:

0.5x35=17.5

Explanation:

You throw 0.5 kg the ball leaves your hand with

A speed of 35

Answer:

The three main/basic parts of the cell are:

Cell Membrane (Plasma Membrane)

Cytoplasm

Nucleus

Explanation:

Answer:

the property of liquid are

1 they can flow from one place to another if surface is slanted

2 it cannot be compressed

Answer:

D) Report the problem to your supervisor.

Explanation:

This is probably the most efficient way get them to stop or to get them to follow the rules <3

I could make a poem for you if you actually gave the words...... what 10 words do i need to incorporate???☹︎