Answers
Answer:
20.95 g of caffeine, C₈H₁₀N₄O₂
Explanation:
From the question given above, the following data were obtained:
Number of molecules of C₈H₁₀N₄O₂ = 6.5×10²² molecules
Mass of C₈H₁₀N₄O₂ =?
From Avogadro's hypothesis,
1 mole of C₈H₁₀N₄O₂ = 6.02×10²³ molecules
Next, we shall determine the mass of 1 mole of C₈H₁₀N₄O₂. This can be obtained as follow:
1 mole of C₈H₁₀N₄O₂ = (8×12) + (10×1) + (4×14) + (2×16)
= 96 + 10 + 56 + 32
1 mole of C₈H₁₀N₄O₂ = 194 g
Thus,
194 g of C₈H₁₀N₄O₂ = 6.02×10²³ molecules
Finally, we shall determine the mass of caffeine, C₈H₁₀N₄O₂ that contains 6.5×10²² molecules. This can be obtained as follow:
6.02×10²³ molecules = 194 g of C₈H₁₀N₄O₂
Therefore,
6.5×10²² molecules = (6.5×10²² × 194) / 6.02×10²³
6.5×10²² molecules = 20.95 g of C₈H₁₀N₄O₂.
Therefore, 20.95 g of caffeine, C₈H₁₀N₄O₂ contains 6.5×10²² molecules
Related Questions
compute the mass-specific enthalpy change associated with Nz that is undergoing a change in state from 400 k to 800 k
Answers
Answer:
The correct answer is "430 kJ/kg". A further explanation is given below.
Explanation:
The given values are:
T₁ = 400 k
T₂ = 800 k
The average temperature will be:
= [tex]\frac{T_1+T_2}{2}[/tex]
= [tex]\frac{400+800}{2}[/tex]
= [tex]600 \ k[/tex]
From table,
At 600 k the [tex]C p[/tex] will be = 1.075
Now,
⇒ The specific enthalpy = [tex]Cp(T_2-T_1)[/tex]
⇒ [tex]\Delta h=1.075 (800-700)[/tex]
⇒ [tex]=430 \ kJ/kg[/tex]
What is the mass in grams of 2.21 mole of Ca3(PO4)4?
Answers
Answer:
1105.29 grams
Explanation:
If you calculate the molar mass of Ca3(PO4)4 you'll get 500.13. Molar mass is the mass of one mole of a substance. Multiply 500.1194 by 2.21 because we have 2.21 moles to get 1105.264 grams.
The molar mass of Ca is 40.078 grams, and there are 3 of them. So 40.078 x 3 is 120.234 grams.
The molar mass of P is 30.974 and there are 4 P's, so 30.974 x 4 is 123.896 grams.
The molar mass of O is 16 grams and there are 6 of them. Again, 16 x 16 is 256 grams.
Add up 120.234 + 123.896 + 256 to get the molar mass of Ca3(PO4)4, 500.13.
List 5 things that were made possible because of the use of microscope
Answers
Answer:
the invention of the microscope has made seeing bacteria/cells, examining forensic evidence (such as fingerprints), studying atomic structure, tissue analysis, and the study of our ecosystem possible to the naked eye
Explanation:
hope this helps
How many moles are equal to 4.11x10^23 molecules of carbon dioxide?
Answers
Answer: 0.68 mole
Explanation:
1 mole (of any atom/molecule) = 6.02214076*10^23
0.683 moles are equal to 4.11x10²³ molecules of carbon dioxide.
What do you mean by the term mole?A mole is a unit of measurement in the International System of Units (SI) used to express an amount of a substance.
One mole is defined as the amount of a substance that contains as many elementary entities as there are atoms in 12 grams of pure carbon-12.
This number is known as Avogadro's number and is approximately 6.023 x 10²³.
Given:
For the number of moles of carbon dioxide in 4.11x10^23 molecules Avogadro's number = 6.023x10²³ particles per mole.
Therefore, the number of moles of carbon dioxide can be calculated as:
moles = number of particles / Avogadro's number
moles = 4.11x10²³ / 6.022x10²³
moles = 0.683 moles
Thus, 4.11x10²³ molecules of carbon dioxide are equal to 0.683 moles of carbon dioxide.
To learn more about the mole, follow the link:
https://brainly.com/question/26416088
#SPJ3
Vinegar is sold as % acidity which means a weight/volume or w/v% calculation. The density of acetic acid is 1.05 g/ml and water is (effectively) 1.0 g/ml. Recollect (from CHMY121) the %w/v refers to a solution with a certain mass of additive made up to 100 mL with the addition of (in this case) water; or gramsofsolute100mLsolution The molar mass of Acetic Acid is 60.052 g/mol. What is the molarity of CH3COOH in water of a 5% acidity vinegar solution
Answers
Answer:
0.83M is molarity of the solution
Explanation:
In a 5% w/v solution of vinegar there are 5g of acetic acid per 100mL of solution. Or 50g per liter of solution. As molarity is defined as the moles of the solute (Acetic acid) per liter of solution we need to convert the 50g per liter to moles per liter using molar mass of acetic acid:
Molarity:
50g/L * (1mol / 60.052g) = 0.8326moles/L =
0.83M is molarity of the solutionWhy is one side of the moon called "the dark side of the moon"?
Answers
Answer:
Option C
Explanation:
The answer is option C or "The amount of time it takes to rotate around it's axis is the same amount of time it takes to revolve around Earth."Remember that the Earth and the Moons amount of time to make a full rotation is almost in sync and they're two sides of the moon, one side we do not see and that's because that side is currently faced away from the Earth which is called the dark side of the moon. Each side has two weeks oh night, and two weeks of day because of how long it takes the moon to revolve, so while we have a side towards the Earth which is illuminated by the sun we have another pointing away in the dark.
Hope this helps.
Which of the following notations represents an alpha particle?
A. 2 He
C.B+
В. В
D. Y
Answers
Answer:
A. 2 He
Explanation:
The notation of an alpha particle is depicted as:
₂He
An alpha particles is a nucleus of 2 protons and 2 neutrons. So it is actually a Helium cation.
Alpha particles are monoenergetic and they mostly have discrete energy.
So, the mass number of the particle is 4 and atomic number is 2
A student reacts 13 moles of iron with 21 moles of oxygen according to the following equation:
4Fe(s) + 3O2(g) +2Fe2O3(s)
How many moles of iron(III) oxide will the reaction produce?
a
34 moles
b
13 moles
c
6.5 moles
d
44 moles
Answers
Answer:
Explanation:
C
The limiting reactant in this reaction is Fe. 4 moles of Fe gives 2 moles of ferric oxide. Hence, 13 moles of Fe will give 6.5 moles of iron (iii)oxide.
What is limiting reactant ?The reactant which is not sufficient in amount determines the yield of the reaction and it is called the limiting reactant of the reaction.
In the given reaction, 4 moles of iron reacts with 3 moles of oxygen to give 2 moles of iron oxide.
given , no.of moles of oxygen gas present in the sample = 21 moles
no.of moles of Fe = 13 moles.
Here, 28 moles of Fe is needed to react with 21 moles of oxygen. Hence, Fe is the limiting reactant.
4 moles of Fe gives 2 moles of iron (III)oxide. Hence, number of moles of the product , formed from 13 moles of Fe is calculated as follows:
(13 moles ×2 moles)/4moles = 6.5m moles
Therefore, 6.5 moles of iron (III)oxide is formed from 13 moles of Fe.
Find more on limiting reactant :
https://brainly.com/question/2948214
#SPJ6
A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500. Liquid hexane condensate is recovered at a rate of 1.50 L/min. N2 C6H14(v) (5.00 mole%) N2 C6H14(v) (18.0 mole%) Liquid condensate 1.50 L C6H14 (l)/min CONDENSER (a) What is the flow rate of the gas stream leaving the condenser in mol/min
Answers
Answer:
the flow rate of the gas stream leaving the condenser is 71.9 moles/min
Explanation:
Given the data in the question and the figure below;
N2 BALANCE
(100% - 18%) × ( mole rate in ) = ( 100% - 5%) × ( mole rate out)
0.82 × ( mole rate in ) = 0.95 × ( mole rate out)
mole rate in = 0.95 × ( mole rate out) / 0.82
mole rate in = 1.1585365853 × ( mole rate out)
now;
HEXANE BALANCE
0.18 × ( mole rate in ) = 0.0500 × ( mole rate out) + condensate --- equ 1
but condensate = 1.5 L/min × ( density of hexane ) × 1/molar mass of hexane
we know that;
density of hexane is 0.6548 g/mL
and molar mass of hexane is 86.18 g/mol
so,
condensate = 1.5 L/min × ( 0.6548 g/mL × 1000 mL/L ) × ( 1/86.18 g/mol)
condensate = 11.3970758876
now lets substitute into equation 1
0.18 × ( mole rate in ) = 0.0500 × ( mole rate out) + condensate
⇒ 0.18 × ( 1.1585365853 × ( mole rate out) ) = 0.0500 × ( mole rate out) + 11.3970758876
⇒ 0.208536585354(mole rate out) = 0.0500( mole rate out) + 11.3970758876
⇒ 0.208536585354(mole rate out) - 0.0500( mole rate out) = 11.3970758876
⇒ 0.158536585354(mole rate out) = 11.3970758876
mole rate out = 11.3970758876 / 0.158536585354
mole rate out = 71.889247 ≈ 71.9 moles/min
Therefore, the flow rate of the gas stream leaving the condenser is 71.9 moles/min
Will give brainliest to correct answer of this picture:
Answers
Answer:
option C : cellular respiration
Explanation:
cellular respiration is taking place in this diagram .
as in respiration food get oxidised to release energy and it releases CO2 and water
Don’t skip please!!! I need help
Answers
Given
Atomic symbol
Required
Atomic composition
Solution
Atomic number = number of protons = number of electrons
Mass Number (A) is the sum of protons and neutrons
Number of protons and Number of Neutrons in nucleus
Number of electrons in the shell
From the picture:
protons = 3
neutrons = 4
electrons = 3
atomic number = protons = electrons = 3
mass number = protons + neutrons = 3+4 = 7
If 1 teaspoons of vinegar are equivalent in 60 drops. How many drops of vinegar are there in
1 ½ teaspoons?
Answers
Answer:
90 drops
Explanation:
1 teaspoon = 60 drops
Half a teaspoon = 60 ÷ 2 = 30 drops
1 and a half = 60 + 30 = 90
Sound waves are longitudinal, mechanical, compression waves.
A. True
B. False
Answers
Answer:
True
Explanation:
Sound waves traveling through air are indeed longitudinal waves with compressions and rarefactions. As sound passes through air (or any fluid medium), the particles of air do not vibrate in a transverse manner.
Answer:
true
Explanation:
ape x
How does latitude affect water temperature? Choose ALL that apply Lesson 2.05 none of the choices Temperatures are greatest at low altitudes because of the proximity to the equator As you move to higher latitudes approaching the poles, the temperature decreases. Temperatures are lowest at low altitudes because of the proximity to the equator
Answers
Answer:
I think it's option 3 (From top to bottom)
Explanation:
When the water is at a higher altitude there's only about 40 percent heat that the equator does.
Determine whether the given name for each ionic compound is correct or not. C o I 2 CoIX2: cobalt(II) iodide Correct name B a C l 2 BaClX2: barium dichloride Correct name C s 2 O CsX2O: cesium oxide Choose... R b 2 S RbX2S: rubidium sulfite Correct name S r B r 2 SrBrX2: strontium(II) bromide Incorrect name
Answers
Answer: [tex]CoI_2[/tex] : cobalt (II) iodide : correct
[tex]BaCl_2[/tex] : barium di chloride : incorrect
[tex]Cs_2O[/tex] : cesium oxide: correct
[tex]Rb_2S[/tex] : rubidium sulphite : incorrect
[tex]SrBr_2[/tex] : strontium (II) bromide : correct
Explanation:
The nomenclature of ionic compounds is given by:
1. Positive is written first followed by the oxidation state of metal in roman numerals in parenthesis.
2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written is '-ide'.
Hence, the name of [tex]CoI_2[/tex] is cobalt (II) iodide, [tex]BaCl_2[/tex] is barium (II) chloride, [tex]Cs_2O[/tex] is cesium oxide, [tex]Rb_2S[/tex] is rubidium sulphide and [tex]SrBr_2[/tex] is strontium (II) bromide.
Calculate the molality of an ethylene glycol (C2H6O2) soltuion, that has a molarity of 2.07 M. The density of the solution is 1.02 g/mL. Only enter the numerical value with 3 significant figures in the answer box below. Do NOT type in the unit (m).
Answers
Answer:
2.03
Explanation:
Let's assume we have 1 L of the solution:
There would be 2.07 ethylene glycol moles.The solution would weigh (1000 mL * 1.02 g/mL) = 1020 g.With that information we can calculate the molality:
molality = moles of solute / kg of solventmolality = 2.07 moles / (1020 ÷ 1000) = 2.03 mKeep in mind that this is only an estimate, as we used the kg of the solution and not of the solvent.
The molality of an ethylene glycol solution is 2.03 kg.
What is molality?The moles of solute divided by the mass of solvent in kilograms is known as the molality of a solution.
Calculation of molality:
Given that, molarity is 2.07 M
Density is 1.02 g/ml
Step 1: To convert the litre into grams, multiply the quantity by 1000
The weight of the solution is [tex]\bold{1.02 \;g/ml\; \times 1000 = 1020 g}[/tex]
Now, molality = moles of solute is divided by mass of solvent in kilograms.
[tex]\bold{Molality = 2.07 \times \dfrac{1020}{1000} = 2.03\; kg}[/tex]
Thus, the molality of the solution is 2.03 kg
Learn more about molality, here:
https://brainly.com/question/4580605
molality = moles of solute / kg of solvent
molality = 2.07 moles / (1020 ÷ 1000) = 2.03 m
Keep in mind that this is only an estimate, as we used the kg of the solution and not of the solvent.
metric conversion ( convert )
Answers
Answer:
13. 2g
14. 5000mL
15. 104,000m
16. 160mm
17. 5600000mg
18. 10hs
19. 0.250km
20. 1daL
Explanation:
13. 1000milligram (mg) = 1gram (g)
Hence, 2000mg = 2000/1000
= 2g
14. 1 litre (L) = 1000millilitre (mL)
Hence, 5L = 5 × 1000
= 5000mL.
15. 1kilometre (km) = 1000metre (m)
Hence, 104km = 104 × 1000
= 104,000m
16. 1 centimetre (cm) = 10millimeters (mm)
Hence, 16cm = 16 × 10
= 160mm
17. 1kilogram (kg) = 1000000 milligram (mg)
Hence, 5.6kg = 5.6 × 1000000
= 5600000mg
18. 1 second (s) = 0.01 hectosecond (hs)
Hence, 1000s = 1000 × 0.01
= 10hs
19. 1000metre (m) = 1kilometre (km)
Hence, 250m = 250/1000
= 0.250km
20. 1 centiliter (cl) = 0.001 Decaliter (daL)
Hence, 1000cl = 1000 × 0.001
= 1daL
5.6 g of Iron reacts with excess fluorine gas.
The mass of iron fluoride produced is 11.3 g
What is the formula of the iron fluoride?
Answers
Answer: FeF3 Iron(III) fluoride
Explanation: 5.6 g = 1/10 mole Fe
11.3-5.6g F = 5.7 = 3/10 mole F
Which of the following Noble Gases has only 2 valence electrons because it only has 1 energy level?
Helium (He)
Neon (Ne)
Argon (Ar)
Krypton (Kr)
Answers
Answer:
it is he
Explanation:
beacuse Noble gases have 2 volence
Lithium diorganocopper (Gilman) reagents are prepared by treatment of an organolithium compound with copper(I) iodide. Decide what lithium diorganocopper (Gilman) reagent is needed to convert 1-bromopropane into propylcyclohexane. Draw the structure of the organolithium compound that is used to prepare Gilman.
Answers
Answer:
See explanation and image attached
Explanation:
The Gilman reagent is a lithium and copper (diorganocopper) reagent with a general formula R2CuLi. R is an alkyl or aryl group.
They are useful in the synthesis of alkanes because they react with organic halides to replace the halide group with an R group.
In this particular instance, we intend to synthesize propylcyclohexane. The structure of the lithium diorganocopper (Gilman) reagent required is shown in the image attached to this answer.
What does CoH12O6 tell you about the glucose molecule?
Answers
Answer:
Glucose = C6H12O6
molecular mass = 6(12) + 12(1) + 6(16)
= 72 + 12 + 96
= 180 g
Explanation:
Glucose has a chemical formula of: C6H12O6 That means glucose is made of 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms. ... Glucose is produced during photosynthesis and acts as the fuel for many organisms.
Would you consider an aquifer a renewable resource? Why or why not?
Answers
Answer:
an aquifer is a renewable resource
Explanation:
Aquifers are defined as the groundwater found deep in the layers of rocks.
An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.
Some of the deep aquifers are considered as nonrenewable resource because it toll hundreds of years to accumulate.
Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.
Which types of energy transformations does a television make?
Electrical energy to energy of motion and heat energy
Electrical energy to heat energy and light energy
Electrical energy to sound energy and energy of motion
Electrical energy to sound energy and light energy
Answers
Answer:
d.
Explanation:
the electricity is why we can hear sounds from the television and see it
What is a common effect of warm ocean currents on nearby coastlines?
A. Low wind speeds
B. Lower temperatures
C. Changing wind directions
D. Increased clouds and precipitation
Answers
In the picture below, ammonia and bleach are mixed together. How many nitrogen (N) atoms will be in the products?
Answers
1
ammonia: NH3 (one nitrogen)
bleach: NaOCl (zero nitrogen)
235U92 + 1N0 + 135Cs55 + 99Rb37 + x1n0
Answers
It’s a test and only need 2 more problems!!!! Thank you and Appreciate it!!!
Answers
Answer:
the molar mass of propane (c3H8) is
12*3+1*8
=36+8=44
1. Imagine that you need to take a medicine that the doctor has prescribed for
you. Explain why scientists who developed that medicine would need to know
whether or not the compound in that medicine is polar. How might a polar
medicine behave differently as it dissolved in the body than a nonpolar medicine
would? Answer in 1 to 2 paragraphs. (10 points) Think about how polar and
nonpolar compounds might behave differently in the watery environment of your
stomach or bloodstream
Answers
Answer: Only non-polar medicines can diffuse across the membrane. non-polar drugs are lipid soluble, while polar drugs are water soluble, so polar drugs cant absorb through biological membranes.
Police investigating the scene of a sexual assault recover a large blanket that they believe may contain useful physical evidence. They take it to the laboratory of forensic serologist Scott Alden, asking him to test it for the presence of semen. Noticing faint pink stains on the blanket, Scott asks the investigating detective if he is aware of anything that might recently have been spilled on the blanket. The detective reports that an overturned bowl of grapes and watermelon was found at the scene, as well as a broken glass that had contained wine. After the detective departs, Scott chooses and administers what he considers the best test for analysing the piece of evidence in his possession. Three minutes after completion of the test, the blanket shows a positive reaction. What test did Scott choose, and what was his conclusion? Explain your answer.
Answers
Answer:
Acid Phosphatase (AP) Test
Explanation:
Acid phosphate is an enzyme that is found in the body. It is secreted majorly by the prostrate gland into the seminal fluid. The acid phosphatase test is used to test for the presence of semen in items.
Scott chose the acid phosphatase test because it is very useful in testing for semen on large items such as blankets. The reaction time for an acid phosphatase test for semen is less than 30 seconds. Seeing that the test was completed in three minutes, Scott concluded that the positive reaction was as a result of some other fluid.
The detectives reported that an overturned bowl of grapes and watermelon was found at the scene as well as a broken glass that had contained wine. Scott knew that some fruit juices like that of watermelon give a positive reaction to the acid phosphatase test but with more time that of the semen fluid because the reaction is a very slow one.
Scott concluded that there was no presence of semen on the blanket and therefore there was no sexual assault.
12) How many moles of CO can be produced from
10.0 mol of CO2
Answers
Answer:
5
Explanation:
There are 2 moles of CO in each CO2. 10 ÷ 2 = 5