Answer:
A and D takes much slower
Explanation:
Here, we want to select, out of the four given reactions, the one that is slower than the other two
The answers in these case are reactions 1 and 4 ( A and D)
The two reactions show what is called rust (as directly seen in reaction 4)
When we speak of rust, we simply mean a reaction that occurs over time
For example, non coated roofings of houses doesn’t get to change color at an instant
The color degradation that occurs is something that takes some time from the initial time they were used to roof the house
Hence, from these analogy, we can see that these reactions need an an external support to thrive or to come into existence
These external supports are natural forces and they contributing efforts occur over time and cannot be seen immediately
These reactions are thus ones that take much slower time than conventional laboratory reactions in the case of the formation of the precipitate or a reaction that requires a low flash point temperature such as that of black powder to produce such explosive effects
So in conclusion, what we are saying is that the two selected reactions are subjected to the availability of some conditions and may take time to manifest and these absolutely differentiates them from reactions that are spontaneous such as the one having an explosive effect or the other one leading to the formation of a precipitate which takes far less times
how many bonds can sodium form
it exists as atom or ion but not as sodium molecule. So there is no any sodium sodium bonding between two sodium atoms. Sodium combines with other element or group to form compounds of sodium like sodium chloride ,sodium carbonate ,sodium sulphate etc. Sodium has symbol Na and its atomic no. is 11 .
Answer:
[tex]\boxed{One\: Ionic\: Bond}[/tex]
Explanation:
For example, sodium, which is a metal, and chloride, a nonmetal, form an ionic bond to make NaCl.
Hope it helps!<3
can someone help me??
Which action is a result of gravity in relation to moving tectonic plates?
Earth's internal heating
circulating material in the mantle
ridge push and slab pull
Earth's magnetic field reverses
Answer:
I do K12 and c is correct!
Answer: B. ridge push and slab pull
Explanation: Took the test.
HELP IN 8TH GRADE ADV SCIENCE
Answer:
protons: 36
neutrons: 48
electrons: 36
Do I use molar mass when the problem gives me grams? (Yes or No), Right answer gets brainliest.
(Stoichiometry Review)
Answer:
yes
Explanation:
yes because the molar mass is an intensive property of the substance, that does not depend on the size of the sample. In the International System of Units (SI), the base unit of molar mass is kg/mol. However, for historical reasons, molar masses are almost always expressed in g/mol.
Answer:
Yes, if your calculating from grams to moles.
Pan of water sitting outside during a hot sunny day. The temperature of the water goes up. What type of heat transfer causes the temperature to go up?
Answer: Convection
Explanation:
I hope this helps :D
Answer:
Radiation
Explanation:
It said that was the answer on the test.
A pan of water is sitting outside during a hot sunny day. The temperature of the water goes up. What type of heat transfer caused the temperature to go up?
conduction
induction
Incorrect: convection
Correct: radiation
What caused space technology to improve so quickly?
Answer:
“spinoff”
Explanation:
Here is just a sampling of the many “spinoff” technologies, as NASA refers to them, resulting from space research and development that we now use in everyday life.
Consider the balanced chemical
reaction below. When the reaction was
carried out, the calculated theoretical
yield for iron was 365 grams, but the
measured yield was 278 grams. What
is the percent yield?
Fe2O3 + 3C0 2Fe + 3C02
Explanation:
Percentage yield = (278/365) * 100% = 76.16%.
Answer:
[tex]\boxed {\boxed {\sf 76.2 \% }}[/tex]
Explanation:
A percent yield helps measure how successful or precise a reaction was. It is ratio of measured yield to theoretical yield as a percent. The formula is:
[tex]percent \ yield=\frac{actual \ yield}{theoretical \ yield } *100[/tex]
For this reaction, the measured/actual yield was 278 grams, while the theoretical yield was 365 grams.
[tex]actual = 278 \ g \\\theoretical= 365 \ g[/tex]
Substitute the values into the formula.
[tex]percent \ yield =\frac{278 \ g}{365 \ g} *100[/tex]
Divide first. The grams (g) will cancel out.
278 g/365 g= 278/365=0.7616438356[tex]percent \ yield =0.76164383561*100[/tex]
Multiply.
[tex]percent \ yield=76.1643835616[/tex]
The original measurements both had 3 significant figures, so we should round our percent yield to 3 sig figs. In this case, that is the tenths place.
The 6 in the tenth place tells us to round the 1 up to a 2.
[tex]percent \ yield \approx 76.2[/tex]
The percent yield is about 76.2 %
Please help me choose the correct statement
Genetics is the study of
What is the atomic number of this element?
Answer:
27
Explanation:
EXPLAIN What is one way that the thermal energy of a system can be changed?
Answer:
When the temperature of an object increases, the average kinetic energy of its particles increases. When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.
Explanation:
BTW I GOT THE ANSWER FROM KRISTINA
The thermal energy of a system is the amount of heat energy in it.
One way to change thermal energy is by alter the system by introducing a new object to the system.
The thermal energy of a system is calculated using:
[tex]E = \frac 12 mc\theta[/tex]
Assume the mass of the system remains unchanged.
When an object is introduced to the system, the thermal energy becomes:
[tex]E_2 = \frac 12 mc(\theta + \alpha)[/tex]
Where:
[tex]\alpha \ne 0[/tex] --- the temperature of the object.
Expand:
[tex]E_2 = \frac 12 mc(\theta) + \frac 12 mc (\alpha)[/tex]
Substitute: [tex]E = \frac 12 mc\theta[/tex]
[tex]E_2 = E + \frac 12 mc (\alpha)[/tex]
This means that the thermal energy of the system will change by the thermal energy of the object that is being introduced to the system.
Hence, one way the thermal energy can be changed is to introduce a new object (or matter).
Read more about thermal energy at:
https://brainly.com/question/18989562
Which substance is correctly identified as a homogeneous or heterogeneous mixture?
A. salad -- heterogeneous
B. milk --- heterogeneous
C. river water --- homogeneous
D. beach sand --- homogeneous
Answer:
A
Explanation:
A salad with lettuce, cheese, seeds, tomatoes, broccoli, and other vegetables is an example of a heterogeneous mixture.
Milk is not mixed with anything so that is incorrect
River water is mixed in with dirt and minerals so this one is incorrect
Beach sand is incorrect because you can see colored particles.
In this reaction, how does the rate of forward reaction vary with the concentration of the product?
2H2S(g) ⇌ 2H2(g) + S2(g)
It increases with an increase in the concentration of S2(g).
It decreases with a decrease in the concentration of H2(g).
It increases with a decrease in the concentration of H2(g).
It decreases with an increase in the concentration of S2(g).
It decreases with increase in the concentration of H2(g).
Answer:
c d e
Explanation:
Answer:
C D E
Explanation:
#platogang
What would happen if a proton, an electron, and 2 neutrons were removed from Lithium (7)
Answer:
This would give us Helium 4.
Explanation:
Lithium7 has 3 protons, 4 neutrons and 3 electrons.
Removing 1 Proton 1 electron and 2 neutrons would form an element with
2 protons 2 electrons and 2 neutrons.
This is Helium 4.
An element in group 3 that is a good conductor of electricity.
Answer:
Well for me I think
Explanation:
it's Aliminium
Answer:
Aluminum is good in heat and conductor
As shown by the periodic table, why do the elements potassium and sodium have similar chemical properties?
How many molecules of H2O are in 8.54 moles of H2O?
Select one:
a. 5.14 * 10^24 molecules H2O
b. 2.86 * 10^23 molecules H2O
c. 6.02 * 10^23 molecules H2O
d. 5.14 * 10^23 molecules H2O
Answer:
[tex]\boxed {\boxed {\sf A. \ About \ 5.14 *10^{24} \ molecules \ H_2O}}[/tex]
Explanation:
To convert from moles to units, we must use Avogadro's Number: 6.022 * 10²³
This tells us the number of units (molecules of water in this problem) in 1 mole of a substance (water). We can use it as a ratio or fraction.
[tex]\frac{6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
Now, we can multiply this fraction by the moles of water (8.54) given.
[tex]8.54 \ mol \ H_2O*\frac{6.022 *10^{23}\ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
When we multiply, the moles of water will cancel out.
[tex]8.54 *\frac{6.022 \ molecules \ H_2O}{1 \ }[/tex]
Since the fraction has a 1 as a denominator, we can remove it. The problem will be a simple multiplication problem.
[tex]8.54*6.022 \ molecules \ H_2O[/tex]
[tex]5.142788*10^{24} \ molecules \ H_2O[/tex]
The original measurement of 8.54 has 3 significant figures (8, 5, and 4). Therefore, we must round our answer to 3 sig figs, which is the hundredth place in this case.
The 2 in the thousandth place tells us to leave the 4 in the hundredth place.
[tex]5.14 *10^{24} \ molecules \ H_2 O[/tex]
There are about 5.14*10²⁴ molecules of water in 8.54 moles.
Answer:
5.14 x 10^24 molecules of H2O.
Explanation:
just took the test
Which change would best aid a farmer in making the transition from conventional farming techniques to more sustainable farming techniques?
irrigate crops using well water
reduce the ratio of essential elements in the fertilizer
plant only genetically modified crops
rotate the types of crops grown
Answer:
Rotate the types of drops grown
Explanation:
When a chemical reaction takes place, the number of atorns of each element in the reactants
nunber of atorms of each element in the products.
will be dferent from
must be equal to
Answer:
The law of conservation of matter says that matter cannot be created or destroyed. In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products
Explanation:
I WILL DIE I HAVE A KNIFE IN MY HAND. ANSWER WITH EXPLANATION. If the sound is high pitched, then the wave's frequency would have a:
A.high frequency, short wavelength
B. high frequency, long wavelength
C. low frequency, long wavelength
D. low frequency, short wavelength
Answer:
A
Explanation:
High frequency, short wavelength
3. Which of the following is an example of a polyatomic ion?
a. NO
b. OP-
C. CI
d. Ca²+
Answer:D
Explanation:polyatomic means more then one and it have more then 1 positive ion
ANSWER ASAP please I need help thank you I’ll give you brainly
What is the standard cell notation of a galvanic cell made with silver (Ag) and
nickel (Ni)?
A. Ni2+(aq) | Ni(s) || Ag(s) | Ag+(aq)
B. Agt(aq) | Ag(s) || Ni(s) | Ni2+(aq)
C. Ag(s) | Ag+(aq) || Ni2+(aq) | Ni(s)
D. Ni(s) | Ni2+(aq) || Ag+(aq) | Ag(s)
Answer:
See the attached notation!
Which is most likely to be damaged by an acid? A. A glass jar B. A plastic bottle C. A gold bracelet D. An aluminum can
Answer:
aluminum can
Explanation:
source: trust me bro im currently working on acid and bases and acid doesnt eat through gold
The object which is most likely to be damaged by an acid is Choice D: An aluminium can.
When an acid undergoes ionization in an aqueous solution, the positively charged ion released is; Hydroxonium ion, H30+.
In essence, the hydrogen ion of an acid can be displaced by the Aluminium ion in the aluminium can.This phenomenon is evident in the arrangement of metals in the electrochemical series.Aluminium is more reactive than the hydrogen ion. As such, an Aluminium can is most likely to be damaged by an acid.
Read more:
https://brainly.com/question/22964871
If you leave your home at noon, and the speed limit is 50 km/h on the highway, what is the approximate time will you get to Atlantic City if Atlantic City is 150 km away? (obeying the speed limit of course)
Answer:
The time you will get to Atlantic City is 3 pm
Explanation:
Given;
speed limit, v = 50 km/h
distance to be traveled, d = 150km
The time of the motion is given as;
time = distance / speed
t = (150 km) / (50 km/h)
t = 3 hours
Thus, if you leave your home at noon, the time you will get to Atlantic City is given as;
time to get home = 12 pm + 3hours = 3 pm
Therefore, the time you will get to Atlantic City is 3 pm
what is the correct name for the compound MgBr?
Answer:
Magnesium bromide
Explanation:
its just the answer give brianliest
How would life be different if there were 10 hours in a day
Answer:
If there was only 10 hours in a day, including the night time it would be complexly new environment. Say you are up for 7 hours and sleep 3, in those 7 hours you would go to work for probably 4 hours, come home and do stuff for 3 then go to bed and do it all over again.
Use the drop-down menus after each statement to identify the dry climate region being described.
v climates feature hot summers and cold winters, dividing the climate into sharply contrasting
seasons.
v climates are characterized by very little rainfall, hot summers, and mild winters.
v climates have annual precipitation between 15 and 25 inches.
Semiarid climate regions have areas of grasslands, called
steppes.
Answer:
✔ semiarid
✔ desert
✔ semiarid
✔ steppes
.
Explanation:
The deserts and steppes comprise the regions that are characterized by dry climates. The dry climates are characterized by very little rainfall, hot summers, and mild winters. The correct option is B.
What is a dry climate?The areas which are very dry and where the water escapes and leaves the area drier than other places is known as the dry climate. Most dry climates have summers very hot, winters cool and warm and the air is very dry.
The main characteristic feature of the dry climate is the low and infrequent rainfall. Arid and semi desert areas have only about 35 cm rainfall per year.
Thus the correct option is B.
To know more about dry climate, visit;
https://brainly.com/question/3623676
#SPJ2
The speed of light is 300,000,000 m/s. What is the frequency of microwaves with a wavelength of 0.01 meter?
Answer:
30,000,000,000 Hz
Explanation:
I searched it up and got 3 x 10^10 and thats 30000000000
separation methods for coconut oil and water
Answer:
[tex]\huge\mathtt{{\colorbox{silver}{ANSWER~~~↴}}}[/tex]
we use a separating funnel to separate oil from water , we are using funnel because both water and oil both are immiscible liquids.
the process of separation of oil from water is called filtration ✔️
no copied answer :)
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Liam observed that the pyrite looks like metal. what property did the student investigate?
Answer:
The correct answer is - Luster.
Explanation:
Luster is a property that explains how the light is reflected on the surface of a mineral. Luster can be categorized with the help of if an element or mineral is metallic or non-metallic.
Pyrite has a shiny, opaque metallic luster which is similar to other metals. There are different types of luster other than metallic also found like, silky, dusty, pearly, waxy, and a few more.