How many moles of aspirin (C9H8O4) are contained in 3.13 g of aspirin?
Answer:
The correct answer is - 0.0173888 moles.
Explanation:
Aspirin, C 9 H 8 O 4 , the atomic mass rounded to the nearest whole number, so: c- 12 h- 1 o - 16
now multiply these number by how many of each there are in the formula:
c - 12 x 9 = 108
h - 1 x 8 = 8
0 - 16 x 4 = 64
add these numbers up 108 + 8 + 64 = 180
aspirin has a molar mass of
180.g mol ^− 1 . This means that one mole of aspirin will have a mass of 180 g .
You're dealing with 3.13 g of aspirin, which will be equivalent to
3.13 g /180g
= 0.0173888 moles aspirin
How many molecules of H20 are present in 7.30 g of water?
Answer:
2.44×10²³ molecules
Explanation:
From the question given above, the following data were obtained:
Mass of H₂O = 7.30 g
Number of molecules of H₂O =?
From Avogadro's hypothesis:
1 mole of H₂O = 6.02×10²³ molecules
1 mole of H₂O = (2×1) + 16
= 2 + 16
= 18 g
Thus,
18 g of H₂O = 6.02×10²³ molecules
Finally, we shall determine the number of molecules present in 7.3 g of H₂O. This can be obtained as follow:
From Avogadro's hypothesis:
18 g of H₂O = 6.02×10²³ molecules
Therefore,
7.3 g of H₂O = 7.3 × 6.02×10²³ / 18
7.3 g of H₂O = 2.44×10²³ molecules
Thus, 7.3 g of H₂O contains 2.44×10²³ molecules
Methane and sulfur react to produce carbon disulfide (CS₂), a liquid often used in the production of cellophane.
2CH₄ + S₈ --> 2CS₂ + 4H₂S
Calculate the moles of H₂S produced when 2.25 mol S₈ is used.
Answer:
9 moles
Explanation:
The balanced chemical equation provided in this question is as follows:
2CH₄ + S₈ → 2CS₂ + 4H₂S
In accordance to the above balanced equation, 1 mole of sulphur (S8) produces 4 moles of hydrogen sulfide (H2S).
Therefore, if 2.25mol of S8 is used, 2.25 × 4 = 9 mol
9 moles of H2S is produced.
A student uses 200 grams of water at a temperature of 60 °C to prepare a saturated solution of potassium chloride , KCI. Identify the solute in this solution.
1. H2O(l)
2. KCl (aq)
3.K + (aq)
4.KCl(s)
Answer:
4. KCl(s)
Explanation:
KCl is an ionic salt that dissolves in water to form a KCl aqueous solution.
A solution is defined as the homogeneous mixture of one or more solutes dissolved in a solvent. Here in the saturated solution of potassium chloride, the solute is KCl. The correct option is 4.
What is a solute?A solute is defined as the substance which is dissolved in a solution. In a solution the amount of the solute present is always smaller than the amount of the solvent. For example in a salt solution, salt dissolves in water and therefore salt is the solute.
The particles of the solute present in a solution cannot be seen by our eye. The solute from a solution is not possible to separate by filtration. In an unsaturated solution, the concentration of the solute is much lower than that of the concentration of the solvent.
A solution is a combination of the solute and the solvent.
Thus the correct option is 4 - KCl.
To know more about solute, visit;
https://brainly.com/question/13812915
#SPJ2
1. What do producers do, and what is another name for them?
Producers are the foundation of every food web in every ecosystem—they occupy what is called the first tropic level of the food web. The second trophic level consists of primary consumers—the herbivores, or animals that eat plants. At the top level are secondary consumers—the carnivores and omnivores who eat the primary consumers. Ultimately, decomposers break down dead organisms, returning vital nutrients to the soil, and restarting the cycle. Another name for producers is autotrophs, which means “self-nourishers.” There are two kinds of autotrophs. The most common are photoautotrophs—producers that carry out photosynthesis. Trees, grasses, and shrubs are the most important terrestrial photoautotrophs. In most aquatic ecosystems, including lakes and oceans, algae are the most important photoautotrophs.
In an electrical circuit, the presence of a resistor limits the current and prevents
damage related to short circuits.
True or
False
A student prepared a stock solution by dissolving 20.0 g of NaOH in enough water to make 150. mL of solution. She then took 15.0 mL of the stock solution and diluted it with enough water to make 65.0 mL of a final solution. What is the concentration of NaOH for the final solution
Answer:
[tex]0.769\ \text{M}[/tex]
Explanation:
Mass of stock solution = 20 g
Molar mass of NaOH = 40 g/mol
Volume of stock solution = 0.150 mL
[tex]M_2[/tex] = Concentration of NaOH for the final solution
[tex]V_1[/tex] = Amount of stock solution taken = 15 mL
[tex]V_2[/tex] = Total volume of solution = 65 mL
Molarity is given by
[tex]M_1=\dfrac{\text{Mass}}{\text{Molar mass}\times \text{Volume}}\\\Rightarrow M_1=\dfrac{20}{40\times 0.15}\\\Rightarrow M_1=\dfrac{10}{3}[/tex]
We have the relation
[tex]M_1V_1=M_2V_2\\\Rightarrow M_2=\dfrac{M_1V_1}{V_2}\\\Rightarrow M_2=\dfrac{\dfrac{10}{3}\times 15}{65}\\\Rightarrow M_2=0.769\ \text{M}[/tex]
The concentration of NaOH for the final solution is [tex]0.769\ \text{M}[/tex].
If a compressed air cylinder for scuba diving contains 6.0 L of gas at 18°C and 200 atm pressure, what volume does the gas occupy at 1.0 atm and 25°C?
Answer:
[tex]V_2=1228.9L[/tex]
Explanation:
Hello there!
In this case, given the pressure, temperature and volume of the gas, we notice that we need the combined ideal gas as shown below:
[tex]\frac{P_2V_2}{T_2} =\frac{P_1V_1}{T_1}[/tex]
Thus, solving for the final volume, V2, we would obtain:
[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]
Now, we plug in the data and make sure the temperature must be in Kelvins to obtain:
[tex]V_2=\frac{200atm*6.0L*(25+273)K}{(18+273.15)K(1.0atm)}\\\\V_2=1228.9L[/tex]
Best regards!
#7 which of the following decreases the rate of solubility of solid molecules in a solution?
Answer:
7. Option D
Explanation:
Solubility increases with the increase in temperature of the solution. It is so because the increase in temperature leads to increase in kinetic energy which then breaks the solute particles held together by intermolecular attractions.
Hence, option D is correct
Which of the following statements is true about rain falling from clouds?*
Answer:
Clouds are not made of liquid water but they hold liquid water, and when the pool of liquid water that fills the inside of clouds gets too large for the cloud to hold, the cloud releases the water as rain. ... Rain does not fall from clouds.
Explanation:
please give me brainlist and follow
Which of the following compounds is least soluble in water?
A) iron (III) chloride
B) ammonium acetate
C) sodium hydroxide
D) magnesium carbonate
Answer:
B
Explanation:
PLEASE HELPPP WILL GIVE 10 PTS AND MARK BRAINIEST TO RIGHT ANSER!!!!!
Roasted coffee beans contain over_____________ chemical compounds
A) 10000000
B) 1000000
C) 1000
D) 10000
Answer:
C. 1000
l think this is correct answer
l hope it's helpful for you
Questions:
1. Are humans getting plastic only from seafood? Explain:
2. Why is it difficult to say that plastics are directly causing illnesses?
3. What could be some of the negative effects of plastics on the
human body?
4. Why is the scientist Shanna Swan worried about the future of
humankind?
Answer:
Explanation:1. It is known that humans are in fact eating these tiny plastic particles, but fish aren't the only source. Bottled water, beer, honey, sea salt and tea bags have all been exposed as microplastic carriers, just to name a few.
2.The chemicals used in the production of plastic are toxic and detrimental to the human body. Chemicals in plastic-like lead, cadmium and mercury directly can come in contact with the humans. These toxins can cause cancers, congenital disabilities, immune system problems and childhood development issues.
3.Microplastics entering the human body via direct exposures through ingestion or inhalation can lead to an array of health impacts, including inflammation, genotoxicity, oxidative stress, apoptosis, and necrosis, which are linked to an array of negative health outcomes including cancer, cardiovascular diseases,
4.Human penises are shrinking because of pollution, warns scientist. ... Dr Shanna Swan writes that humanity is facing an "existential crisis" in fertility rates as a result of phthalates, a chemical used when manufacturing plastics that impacts the hormone-producing endocrine system
What is neutralisation reaction? Give an example with reaction involved. State two uses of neutralisation reaction in everyday life.
Answer:
neutralization reaction is when an acid and a base react to form water and salt and involves the combination of hydrogen ions and hydroxyl ions to generate water. The neutralization of a strong acid and strong base has a pH equal to 7.
Why do atoms connect to eachother?
Answer:
To keep from falling apart
Explanation:
PDF on Unit operation 1 and 2
How do organisms get their genes?
ANSWER CAREFULLY!!!
Answer:
born
Explanation:
they get bornnnnnnnn
Answer:
by their mummy and daddy
Explanation:
if their mummy has blue eyes but their Duddy has brown eyes if the child has brown eyes then the dud has the most dominatetrait
have a good day mate
which wet land is known for the large trees in the water known as bottomland hardwoods?
A. Central Texas
B.South Texas
C. East texas
When you work out your cells need
Answer:
Waterrrr
Explanation:
H2O
Answer:
Muscle contraction
Explanation:
According to the new study, exercise improves muscle health by renewing its cellular powerhouse: the mitochondria. Mitochondria are crucial to the good functioning of our bodies, as well as to our overall health and longevity. These tiny parts of the cell turn the food we eat into energy.
Select the correct answer.
For Al, its atomic number is 13 and its mass number is 27. How many neutrons does it have?
Ο Α. .
13
ОВ.
14
26
OD
27
O E
40
Answer:
B.) 14
Explanation:
27-13=14 neutrons
17. The equation below represents a chemical reaction that occurs in living cells.
CoH1206 + 602 -- 6002 + 6H20 + energy
How many atoms are represented in the reactants of this equation?
Answer:
36 atoms
Explanation:
C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O + energyThe reactants are in the left side of the equation. First we determine how many atoms are there in the C₆H₁₂O₆ molecule:
6 C atoms + 12 H atoms + 6 O atoms = 24 atoms in totalThere are two atoms in a O₂ molecule, and there are 6 O₂ molecules in the equation:
2 * (6 O atoms) = 12 atoms in totalThe total number of atoms in the reactants is
24 + 12 = 36 atomsWhat Mass of glucose is
needed to prepare 235mL of 22% w/v glucose?
Answer: 8 grams of glucose are needed to prepare 400. ml of a 2.0%(m/v) glucose solution. 8 grams of glucose are needed to prepare 400.Oct 6, 2017
Answer:
8 grams of glucose are needed to prepare 400. ml of a 2.0%(m/v) glucose solution. 8 grams of glucose are needed to prepare 400
Explanation:
Which property increases as you move down a column in the periodic table?
A) atomic size
B) ionization energy
C) nonmetallic character
D) none of the above (all increase as you move down a column).
Answer:
A) atomic size
Explanation:
plz, help me I'm so confused!
(this is also science)
Answer:
Well, there is no photo...
Explanation:
What is created when an acid is mixed with a base?
Answer:
If you mix equal amounts of a strong acid and a strong base, the two chemicals essentially cancel each other out and produce a salt and water. Mixing equal amounts of a strong acid with a strong base also produces a neutral pH (pH = 7) solution.
How many moles of solute are in 53.1 mL of 12.5M HCI?
how many atoms of carbon are in a diamond with a mass of 0.568 g?
Answer:
There are 2.85 x 10^22 atoms of carbon in a diamond with a mass of 0.568 g.
Hope this helps! :)
What happened during the fusion reaction shown? 2H Зн 4He neutron O A. Two H nuclei fused into one He nucleus. O B. One He nucleus split into two H nuclei. O C. The nuclei that fused lost all their neutrons. D. The nuclei that fused lost some of their protons.
Answer: C.
Explanation:
two H nuclei fused into one He nucleus
Answer: A!
Explanation: just did it
What class of chemicals is responsible for ozone depletion?
Help me! Who ever gets to answer and has the best answer gets brainliest (very easy!)
Answer:
Fires --> These consume fuel and convert chemical energy stored in that fuel into thermal light and sound energy.
Decay -->The breakdown of dead plants and animals releases thermal energy.
Earth --> Thermal energy comes from deep inside and it is called geothermal energy.