Pedro created the following table for his observations on balanced and unbalanced forces. He forgot to record some of the information. Which two measurements correctly complete the table?
A. 50 N in row one and 100 N in row two
B. 100 N in row one and 30 N in row two
C. 100 N in row one and 60 N in row two
D. 90 N in row one and 50 N in row two
Answers
Answer:
Option B. 100 N in row one and 30 N in row two
Explanation:
To know the the correct answer to the question, do the following:
For Row 1:
Force to the right (Fᵣ) = 100 N
Net force (Fₙ) = 0 (since it is balanced)
Force to the left (Fₗ) =?
Fₙ = Fᵣ – Fₗ
0 = 100 – Fₗ
Collect like terms
0 – 100 = – Fₗ
– 100 = – Fₗ
Multiply through by –1
Fₗ = 100 N
For Row 2:
For the net force to be unbalanced, it means that one of the force is greater or lesser than the other.
In the question given above, the force to the left is given as 50 N and it show it is greater than the force to be right. The other force must be lesser than 50 N to result in unbalanced force according to the illustration from the question.
From the options given above, option B has a lesser force (i.e 30 N) for row 2 compared to option C which has a greater force (60 N) for row 2.
Therefore, option B gives the correct answer to the question.
Related Questions
Which bond would require more energy to break apart? (Short bond or Long bond). Explain
a) longer bond. because the charges are further apart
b) shorter bond. because the charges are closer together
c) shorter bond. because the charges are both positive
d) longer bond. because the charges are closer together
Answers
Answer:
shorter bond, because charges are close apart
Explanation:
shorter the bond length more is the energy required to break the bond for example if you take three pencils of different sizes one longer One medium sized One Shot sized if you try to break them the longer pencil will break much faster than the other two because the greater the length the lesser the strength the lesser energy you need to apply to break them apart ...
hope you understand
What is a personal factor of resilience?
A. Feeling of belonging
B. Family and friends
C. Genetics
D. Coping Mechanisms
Answers
Answer:
B
Explanation:
B is a personal factor of resilience
Here’s the answers I wasn’t asking a question hehe!Subtract the mass of the filter paper (0.27g) from the mass of the paper and copper (0.98 g). Record the difference in the data table as the amount of copper.
You already converted mass to moles for the reactants. Now convert mass to moles for the product, copper
all for edge
ANSWERS!!!
Answers
David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?
Copper
Glass
Plastic
Wood
Answers
Answer:
this will copper this is correct answer
Question asked: David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?
Answer: Copper
Explanation: Copper would be the right answer because that's the only material that would conduct electricity.
--------------------------------------------------------------------------------------------
I hope this helps!
The work of which scientist was most essential to the use of radioactive
isotopes in medicine?
A. Antoine-Laurent Lavoisier
B. Robert Boyle
C. Marie Curie
D. John Dalton
Answers
Answer:
A
Antoine-Laurent Lavoisier
:D
The scientist was most essential to the use of radioactive isotopes in medicine is " John Lawrence's".
What is radioactive isotopes?The radioactive isotopes of such an element were called radioisotopes. Atoms that have too much energy in their nucleus or even an unstable neutron-proton pair.
It marked the beginning of John Lawrence's lengthy career of service and the first time a radioactive isotope had already been employed in the management of a human illness. His laboratory is regarded as the origin of nuclear medicine, for which he is regarded as its father.
The scientist most essential to the use of radioactive isotopes in medicine is " John Lawrence's".
To know more about radioactive isotopes.
https://brainly.com/question/1907960
#SPJ3
How many atoms are in 123 g of calcium
Answers
Answer:
Molar mass of Ca = 40 g / mol , given 123 g Ca is 123/40= 3.075 moles,
1 mole = 6.022 * 10^23 atoms, so 3.075 moles Ca= 18.51*10^23 atoms
Explanation:
The number of atoms present in 123 g of calcium is 18.51 x 10²³ atoms.
What is calcium?Calcium is an element present in the periodic table. It is very much needed for the strength of the bones and teeth.
"Molar mass of many compounds can be calculated by dividing the mass of the compound by the number of moles of the compound."
"The mole is a SI unit of measurement that is used to calculate the quantity of any substance".
First, calculate the moles
Moles = mass / molar mass
Molar mass of Ca = 40 g / mol
Given 123 g Ca is mass
123 / 40 = 3.075 moles,
1 mole = 6.022 x 10²³ atoms,
6.022 x 10²³ is the Avogadro number. It equals to one mole.
So 3.075 moles Ca= 18.51 x 10²³ atoms.
Thus, the number of atoms present in 123 g of calcium is 18.51 x 10²³ atoms.
To learn more about atoms, refer to the below link:
https://brainly.com/question/11763544
#SPJ2
In the 1860's the Central Pacific Railroad company employed the chemist James Howden to make an explosive capable of blasting through the granite mountains of the Sierras. The railroad needed tunnels for their train to pass through. James Howden built a nitroglycerin producing lab on Donner Pass where he would make the explosive compound on command. Nitroglycerin has the chemical formula C3H5N3O9. When it is detonated, it decomposes into carbon dioxide, water, oxygen and nitrogen. What is the theoretical yield for moles of nitrogen gas produced upon detonation of 1.320 tons of nitroglycerin? There are 907185 grams in 1 ton and nitroglycerin has a molar mass of 227 g/mol. Do not include decimals in your answer.
Answers
Answer:
8 × 10³ mol N₂
Explanation:
Step 1: Write the balanced equation
2 C₃H₅N₃O₉ ⇒ 6 CO₂ + 5 H₂O + 0.5 O₂ + 3 N₂
Step 2: Convert the mass of C₃H₅N₃O₉ from tons to grams
We will use the conversion factor 1 t = 907185 g.
1.320 t × 907185 g/1 t = 1.197 × 10⁶ g
Step 3: Calculate the moles corresponding to 1.197 × 10⁶ g of C₃H₅N₃O₉
The molar mass of C₃H₅N₃O₉ is 227 g/mol.
1.197 × 10⁶ g × 1 mol/227 g = 5.27 × 10³ mol
Step 4: Calculate the moles of N₂ formed from 5.27 × 10³ moles of C₃H₅N₃O₉
The molar ratio of C₃H₅N₃O₉ to N₂ is 2:3.
5.27 × 10³ mol C₃H₅N₃O₉ × 3 mol N₂/2 mol C₃H₅N₃O₉ = 7.91 × 10³ mol N₂ ≈ 8 × 10³ mol N₂
plz help as soon as you can
Oil of Vitriol is a substance that humankind has used for thousands of years! Today the substance is known by its scientific name sulfuric acid and has the molecular formula H2SO4. What is the molar mass of H2SO4?
Question 2 options:
49.067 g/mol
73.29 g/mol
98.08 g/mol
148.72 g/mol
Answers
Answer:
98.08 g/mol
Explanation:
Hope this helps.
11) How many moles of CO2 can be produced from
5.0 moles of O2?
Answers
Answer:
3.6 moles
Explanation:
5.0moles produce 44g/x will produce 32g the answer is a3.6moles
help me out pleaseeee
Answers
Answer:
Help with what?
Deposition can occur where wind or running water slows down? true or false
Answers
Answer:
The answer is True.
Explanation:
Potassium nitrate, bKNO3 , is 38.7% potassium by mass. If you have 300 grams of KNO; how many grams of potassium can you extract from it?
Answers
Mass of Potassium : 116.1 g
Further explanationGiven
38.7% potassium in Potassium nitrate
300 g of KNO3
Required
mass of potassium
Solution
%mass of element = (mass of an element in 1 mole of compound/mass of 1 mole compound) x 100%
mass of K(potassium) in 300 g KNO3 :
= 38.7% x 300 g
= 116.1 g
a rock that is pushed down a hill represents both potential and kinetic energy. which statement best represents the energy transformation involved in this scenario
Answers
Explanation:
kinetic energy Increases due to gravity. A rock being pushed down a hill increases in speed, due to gravity, what goes up must come down....
Which part of the atom was discovered last?
Answers
Answer: The nuetron was
Explanation: sorry is this is incorrect but im
99% its right
1. What is the molar mass of Al2S3?
Answers
Answer:
150.17 g/mol
Explanation:
Help me on these 2 science questions for brainliest pleaseeeeeee...
Answers
Answer:
Explanation:
1:) A
Mostly just use context clues
2:) D
The climate on earth is mostly due to earth's atmosphere. So, no, the moon doesn't have similar weather
How do atoms of copper differ from atoms of aluminum? *
They are not pure substances.
They have different chemical properties.
They can be formed by physical changes.
They are made up of more than one type of particle.
Answers
Answer:
The copper atoms are smaller than the aluminum atoms so more copper atoms fit in the same volume. ... Copper is more dense than aluminum. The copper must be more dense because when you compare equal volumes of the two substances, the copper has greater mass
Many popular brands of toothpaste contain about 1.00 mg of fluoride per gram of toothpaste. The fluoride compound that is most often used in toothpaste is sodium fluoride, NaF, which is 45% fluoride by mass. How many milligrams of NaF are in a 250.0 g tube of toothpaste
Answers
Answer:
Mass of NaF in 250 g tube of toothpaste = 100 mg of NaF
Explanation:
Mass of fluoride per gram of toothpaste = 1 mg
From the given data, the fluoride compound that is most often used in toothpaste is sodium fluoride, NaF, which is 45% fluoride by mass, mass of sodium fluoride per gram of toothpaste can be determined as follows:
1 mg of fluoride per gram of toothpaste = 45% total mass of NaF per gram of toothpaste
100% mass of NaF in toothpaste = 100/45 * 1 mg = 2.22 mg of NaF.
Therefore, mass of NaF per gram of toothpaste is 2.22 mg.
The mass of NaF in 250 g of toothpaste is then calculated below:
In 250 g of toothpaste, mass of NaF = 250 * 2.22 mg = 99.9 mg of NaF
How to Balance __MgF2 + __Li2CO3 + __ LiF
Answers
I’ll give you a lot of points and mark you brainlist if you awnse all 3
Answers
Answer:
Magma
Volcanic glass
Granite and pumice
Explanation:
Answer:
Magma,
Volcanic Glass,
Granite and Pumice,
Lava
Explanation:
Help pls!!!!!!!!!!!!!!!!!!!!!!!!!!
Answers
I think
Hope this helps
Answer:
water/d
Explanation:
Which of the following elements would be considered a compound? CH, Si, F, O6
Answers
Answer:
CH
Explanation:
CH, a typical sample of the compound contains one atom of carbon (C) to one atom of hydrogen (H).
How many molecule are in 1.80mol of water
Answers
Answer:
1 molecule of H2O contains 10 electrons. So one mole that is equal to 22.4 L of H2O will contain 6.022 × 10^23 × 10 electrons. So 1.8 ml will have - 6.022×10^23×1.8×10/22.4 ×1000=6.022×10^21×1.8/22.4.
Explanation:
I just saw this answer here in brainly
Sam noticed on a climate map that most of the areas with high rainfall and a tropical climate were located in one region. Why are all the rainy, tropical areas found at a similar latitude? Describe the factors that influence the climate in this location.
Answers
Answer:
Okay here's the answer ↓
Step-by-step explanation:
Tropical climate is one of the five major climate groups in the Köppen climate classification. Tropical climates are characterized by monthly average temperatures of 18 ℃ (64.4 ℉) or higher year-round and feature hot temperatures. Annual precipitation is often abundant in tropical climates, and shows a seasonal rhythm to varying degrees. There are normally only two seasons in tropical climates, a wet season and a dry season. The annual temperature range in tropical climates is normally very small. Sunlight is intense because they are receiving direct sunlight.
The image shown here is a good illustration of which law?
Answers
Answer:
3rd law
Explanation:
His third laws states that every action has an equal and opposite reaction. because you are putting force on your wall, the wall is giving the force of wall on your finger.
Why are acids called proton donors?
Answers
The relationship between acids and bases is more aggressive than the donor/acceptor terminology implies. Bases don't passively "accept" protons; they rip hydrogen ions from acids. Acids don't "donate" hydrogen ions; they surrender them.
Compare the two shampoo
Answers
Answer:
Explanation:
I think you forgot to attach an image here!
Physical or Chemical change?
Answers
Answer: Chemical Change
Explanation:
because it probably doesnt change the physical anatomy of the object only the atoms/ molecule relations
pertain to the following class, Point:
public class Point {
private double x;
private double y;
public Point() {
this (0, 0);
}
public Point(double a, double b) {
/* missing code */
}
// ... other methods not shown
}
Which of the following correctly implements the equals method?
public boolean equals(Point p) {
return (x == p.x && y == p.y );
}
public void equals(Point p) {
System.out.println(x == p.x && y == p.y);
}
public void equals(Point p) {
return (x == p.x && y == p.y );
}
public boolean equals(Point p) {
return (x == Point.x && y == Point.y);
}
public boolean equals(Point p) {
System.out.println(x == p.x && y == p.y);
}
_______________________
The default constructor sets x and y to (0, 0) by calling the second constructor. What could be used to replace /* missing code */ so that this works as intended?
a = 0;
b = 0;
this (x, y);
this(0, 0);
x = a;
y = b;
a = x;
b = y;
_____________________
Which of the following correctly implements a mutator method for Point?
public double getX() {
return x;
}
public void setCoordinates (double a, double b) {
x = a;
y = b;
}
None of the items listed.
public double getX() {
return a;
}
public void setCoordinates (double a, double b) {
Point p = new Point(a,b);
}
Answers
b = 0;
this (x, y);
this(0, 0);
x = a;
y = b;
a =x
This above solution is just according to the public boolean equals(Point p) { return (x == p.x && y == p.y ); and public void equals(Point p) { System.out.println(x == p.x && y == p.y);}
What is public void?An abstract class contains a pure virtual function. Pure virtual class cannot be instantiated but it can be subclassed and the subclass can provide an implementation of the function.
A virtual function declaration in the class is preceded by the virtual keyword. For example, virtual void print();
A pure virtual function declaration is followed by '=0;'
public: virtual void print()=0;
The main method header is written as public static void main(String[] args). A main method is something that is required in Java. You must have at least one class with a method named main. In Java, main is a static method, which means that it is part of its class but not parts of objects.
Therefore, This above solution is just according to the public boolean equals(Point p) { return (x == p.x && y == p.y ); and public void equals(Point p) { System.out.println(x == p.x && y == p.y);}
Learn more about System.out.println on:
https://brainly.com/question/19467372
#SPJ5
WORTH 18 POINTS! MY LIFE DEPENDS ON THIS ANSWER!!!
Which compound listed below is most likely to have to following properties?
-solid at room temperature
- high melting points
-solble in water
-conductive when dissolved
1.sodium chloride
2.carbon monoxide
3.nitrogen trifluoride
4.none of these compounds could have all of the properties listed
Answers
Answer:
1.sodium chloride
Explanation:
because the others dont have all the listed properties