Part B
Emmerson pours the clear water into the side of the vase with the soil and gravel. The series of animated pictures shows how his model looked over time. What do you observe?

Answer:

With the friction on, the minimum height I can place the skater so that he makes it all the way around the loop is 6 meters. This is about a meter higher than if the friction were turned off. The “lost” energy is going towards thermal energy. This means in real life that heat is being created due to the friction.

Explanation:

Answer:

With the friction on, the minimum height I can place the skater so that he makes it all the way around the loop is 6 meters. This is about a meter higher than if the friction were turned off. The “lost” energy is going towards thermal energy. This means in real life that heat is being created due to the friction.

Explanation:

1. Atomic Radius:

  Atomic radius increases down a group and decreases across a period. Lithium (Li) has a larger atomic radius than beryllium (Be) due to Li's additional electron shell. Be has fewer shells, resulting in a smaller radius.

2. 2nd Ionization:

  Second ionization energy is the energy needed to remove a second electron. Potassium (K) has higher second ionization energy than calcium (Ca) due to K's electron configuration ([Ar] 4s¹), requiring breaking into a filled shell.

3. C-C Bond:

  Carbon-to-carbon bond energy differs based on bond type. Ethene (C₂H₄) has a stronger double bond, requiring more energy to break, while ethane (C₂H₆) has a weaker single bond.

4. Boiling Point:

  Boiling points relate to intermolecular forces. Chlorine (Cl₂) has lower boiling point due to weaker dispersion forces compared to bromine (Br₂), with stronger dispersion forces leading to higher boiling point.

Learn more about atomic structure, here:

https://brainly.com/question/30547912

#SPJ12

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the IUPAC name of the Mg[tex]_3[/tex]P[tex]_2[/tex] is Tri magnesium Di phosphide.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. The IUPAC name of the Mg[tex]_3[/tex]P[tex]_2[/tex] is Tri magnesium Di phosphide. The oxidation state of phosphide is -3.

Therefore, the IUPAC name of the Mg[tex]_3[/tex]P[tex]_2[/tex] is Tri magnesium Di phosphide.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ5

Answer:FeCO3 + 2HNO3 > Fe(NO3)2 (salt) + H20 (water) + CO2(carbon dioxide)

Explanation:

Carbonate-with-acid reactions form these three things

Answer:

C

Explanation:

burning gasoline i think pls can i have brainliest if right!

Answer:French fries

Explanation:

Answer:

The answer to your question is 15

Answer: 15768 seconds

Explanation:            (50 years) x (365 da/yr) x (86,400 sec/da)

        =      (50 x 365 x 86,400)  seconds

        =        1.5768 x 10⁹ seconds

Answer:

C2H4O2

Explanation:

Jus took USA Test prep test

Covalent Bond.

Explanation: Covalent compound are soluble in organic solvents (non polar) but insoluble in water (polar).

Ethanol being both polar and non polar can dissolve covalent compound.

To solve for number one we must follow these steps:

m = 703.55 g − 345.8 g

m = 357.75 g

Then we solve for the density-

d = 357.75 g / 225 mL

d = 1.59 g/mL

Answer for number 5) 1.59 g/mL

Density= Mass/Volume

therefor- Mass = 65.14g and Volume = 35.4mL

Density = 65.14g/35.4 mL = 1.84 g/mL

Answer for number 6) 1.84 g/mL

Question 7-

g = (0.8765 g/mL)(250.0 mL) = 219.1 g

Answer: 219.1 g

Question 8-

Density = mass/volume

Mass = 1587g

4.5cm x 5.2cm x 6cm = 140.4 cubic-cm

Volume = 140.4 cubic-cm

Mass/volume = 1587/140.4 = 11.3 g/cm^3

Answer: 11.3 g/cm^3

Question 9:

First calculate the volume of iron

49.10mL − 45.50mL = 3.60mL

Density = mass/volume;

density = 28.5g/3.60 mL= 7.92 g/mL

Answer: 7.92 g/mL

Question 10:

Volume = 2500.0g / 10.5g/cm3 = 238.095cm^3

Now we round up the answer to 238cm^3

Answer: 238cm^3

I hope this helped!

The element that is being reduced in the given redox reaction is Cl (Chlorine)

The given redox reaction is

Cr(OH)₄⁻(aq) + ClO⁻(aq) → CrO₄²⁻(aq) + Cl⁻(aq)

First, we will define the terms oxidation and reduction

Oxidation can be defined as an increase in oxidation number

Reduction is defined as a decrease in oxidation number

This means the element that is being reduced in the reaction would have a decrease in oxidation number.

Oxidation number of Cr in Cr(OH)₄⁻ is +3; and the oxidation number of Cr in CrO₄²⁻ is +6. This is an increase in oxidation number and it means Cr is being oxidized.

Oxidation number of Cl in ClO⁻ is +1; and the oxidation number of Cl in Cl⁻ is -1. This is a decrease in oxidation number and it means Cl is being reduced.

Hence, the element that is being reduced in the given redox reaction is Cl (Chlorine).

Learn more here: https://brainly.com/question/25673444

Answer:

Relation between AMU and Gram

The mass of an atom in amu is numerically the same as the mass of one mole of atoms of the element in grams. One atom of sulfur has a mass of 32.07 amu; one mole of S atoms has a mass of 32.07 g. For compounds, the molecular mass (in amu) is numerically the same as the mass of one mole of the compound in grams.

Explanation:

i hope this helps and can i have branly plz

Answer:

We can mix two compounds and create a third that bears little resemblance to its parents. For instance, by mixing two parts of hydrogen gas with one of oxygen - liquid water is formed. We should not be misled by the fact that chlorine and chlorine dioxide share a word in common. The chemistries of the two compounds are completely different.

Chlorine and chlorine dioxide are both oxidizing agents (electron receivers). However, chlorine has the capacity to take in two electrons, whereas chlorine dioxide can absorb five. This means that mole for mole, ClO2 is 2.6 times more effective than chlorine.

If equal, if not greater importance is the fact that chlorine dioxide will not react with many organic compounds, and as a result, ClO2 does not produce environmentally dangerous chlorinated organics. For example; aromatic compounds have carbon atoms arranged in rings and they may have other atoms, such as chlorine, attached to these rings, to form a chlorinated aromatic - a highly toxic compound that persists in the environment long after it is produced.  

Chlorine dioxide's behaviour as an oxidizing agent is quite dissimilar. Like ozone, the predominant oxidation reaction mechanism for chlorine dioxide proceeds through a process known as free radical electrophilic (i.e. electron-attracting) abstraction rather than by oxidative substitution or addition (as in chlorinating agents such as chlorine or hypochlorite). This means that chlorinated organic compounds such as THMs and HAAs are not produced as a result of disinfection using chlorine dioxide

Hope this helps, have a nice day! :D

The way that the names of these compounds show that the Chlorine oxides are different is by making reference to the number of individual molecules in the compound.

The number of chlorine and oxygen molecules in each compound are used to name the compounds which ensures that they are differentiated.

ClO₂ is called "Chlorine Dioxide" which shows that there are two Oxygen atoms.

Cl₂O₃ is called "Dichlorine Trioxide" which shows that there are two Chlorine molecules and 3 Oxygen molecules.

Find out more on Chlorine oxides at https://brainly.com/question/25937152.

You can use Balances and Scales..

Answer:

Not me

Explanation:

Answer:

9

Explanation:

Nitrogen-16

Atomic number of nitrogen= 7

electrons=7

protons=7

neutrons= ?

Nitrogen-'16'= 16 means the mass

16-7= 9

There are 9 neutrons in Nitrogen-16

Work required = 30J

This is because work = F * x

F (Newton's force) = 3N

x (car moved) = 10m

Work = 3 * 10 = 30J

Answer: look at the close because that is the answer

Explanation:

Answer:

I think Mg is correct I am not sure

Answer:

Explanation:

Answer:

Phosphorus would form a -3 charge

Explanation:

Phosphorus has five outer electrons that can bind  atoms. As a result, Phosphorus forms a ion has a charge of -3.

Answer:

sitric acid from lemon

Explanation:

there

The first stage of the experiment is focusing only on the physical properties of acidic property.

A physical property would be any quantifiable attribute whose value describes the condition of a physical system. Changes in a system's physical attributes are able to characterize its transitions between brief states. Physical attributes are sometimes known as observables.

Physical characteristics are frequently classified as intense or extensive. An intense property is independent of the system's size or extent, as well as the amount of material in the item, whereas an extended property has an additive link. The first stage of the experiment is focusing only on the physical properties of acidic property.

Therefore, the first stage of the experiment is focusing only on the physical properties of acidic property.

To learn more about physical property, here:

https://brainly.com/question/29775585

#SPJ2

Answer:

Explanation:

When two substances at different temperatures like into contact, the substance that is at higher temperature will transfer energy, in the form of heat, to the substance that is at lower temperature, until their temperatures get equal.

In this case, if the two substances are isolated of the rest of the universe, the law of conservation of energy states that the heat released by the substance initially at higher temperature is the same amount of heat gained by the substance originally at lower temperature.

Answer is: the current solution is unsaturated.

Unsaturated solution means that more of a substance can be dissolve.

For example:

Solubility of potassium chlorate (KClO₃) at 100 grams of water at 80°C is 37.5 g, that means that all 37.5 g is completely dissolves, this is the saturated solution.

If we add 20 grams of potassium chlorate in 100 grams of water, there is less solute than the saturated solution, so this is unsaturated solution.

Answer:

Copper

Explanation:

Copper has this electronic configuration.

You can count the total number of electrons

= 29

Cu is the 29 th in the periodic table.( atomic number = 29)

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the given electronic configuration represents copper element.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

The systematic distribution of electrons in the various atomic orbitals is called its electronic configuration. The atomic number of copper is 29. The electronic configuration of copper is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹ 3d¹⁰. 1,2,3 represents the number of shells and s and represents the orbitals. The superscripts represents the number of electrons in each orbitals.

Therefore, the given electronic configuration represents copper element.

To know more about element, here:

brainly.com/question/8460633

#SPJ2

Answer:

I obseve that the water is turnign a little green in the begining but when the water hit the gravel and dirt it became realy blue

Explanation:

Mark brainliest idc

Answer:

I observe that the water started off by turning green and the higher the water went the more blue it had gotten.

Explanation: lazy answer but if you want an answer here you go:)

I really hope this helped!

An element is the basic unit of things.

10 elements:

Elements that make up proteins:

Elements that make up fats:

Elements that make up carbohydrate: (before any oxidation or reduction)