Not every earthquake has a(n) Foreshock, but every earthquake has an Aftershock that occurs in the Same place as the mainshock.
What is an earthquake?
An earthquake is defined as a natural disaster in which there are tectonic plates that are present on the earth's crust collides with each other.
An Earthquake can be minor as well as natural depending upon the frequency it causes the damage. Earthquake is the Shaking of Earth and was much destruction of the economy and manpower.
Surroundings are being disturbed like trees will fall, and buildings will collapse which will cause damage to the economy as well as to human life.
Foreshock is the before shop which happens before the earthquake and aftershock is the other socks that happen after the earthquake
Thus, the correct options are 1. Foreshock, 2. Aftershock, 3. The Same place as.
To learn more about earthquakes, refer to the link:
https://brainly.com/question/1296104
#SPJ2
A penny is 0.061 inches thick. What is the value of the 6 in the thickness of a penny? Mathematics not chemistry
Answer:
because of the location of the 6 the answer is 6 cent
Answer:
Hundredths
Explanation:
$6 times 1/$100. The 0 is tenths, the 6 is hundredths and the 1 is thousandths.
1. While on a movie set, a stuntman jumps off
the roof of a building. As he falls toward an
airbag, what is increasing?
A. gravity
B. wind velocity
C. kinetic energy
D. potential energy
kinetic energy kkkkkkkkkk
please help quickly
Rubia was given a type of inclined plane called a ramp in her science class. Her teacher told her that the ramp should have a mechanical advantage of 3.
Rubia pulled a block up the ramp, but afterward she calculated that the mechanical advantage of the ramp was 2.8 instead of 3. Her teacher said she did not make a mistake. What did Rubia calculate?
A.
the actual operating power of the ramp
B.
the actual mechanical advantage of the ramp
C.
the ideal mechanical advantage of the ramp
D.
the ideal operating power of the ramp
Answer: B. The actual mechanical advantage of the ramp.
Explanation:
The professor saying that the ramp SHOULD have a mechanical advantage of 3 indicates that that would be the ideal mechanical advantage. Since Rubia calculated it to be 2.8, that means that it is the acutal mechanical advantage. The actual advantage will be reduced from the ieal due to things like friction.
A chemist wants to extract the gold from 54.9 g of AuCl3*2H20 *gold(III) chloride dyhydrate) by electrolysis of an aqueous solution. What mass of gold could be obtained from this sample? Answer in units of g
From the information provided in the question, the mass of gold that can be obtained from this sample is 31.5 g of Au.
Given that the reduction of gold III occurs thus;
Au^3+(aq) + 3e ------> Au(s)
Number of moles of gold(III) chloride dihydrate = mass/molar mass = 54.9 g /339.35 g/mol = 0.16 moles
Number of moles of Au^3+ in AuCl3.2H20 = 0.16 moles
Now;
1 mole of Au has a mass of 197 g/mol
0.16 moles of Au has a mass of 0.16 moles × 197 g/mol/1 mole
= 31.5 g of Au.
The mass of gold that can be obtained from this sample is 31.5 g of Au.
Learn more: https://brainly.com/question/6284546
The last layer in layered design is _____________. Object Process None of the options Atoms Sub process
The last layer in the layered design is system layer so none of the above is the correct option.
Robotic Process Automation is a software technology that make use of some programs of computer to copy or mimic the behaviors of human when it has access with them. They been use effectively and ensure the work is perfectly done.
There are layers in the Robotic process automation but the last layer is System layer.
They can handle high volume of tasks.
The lowermost layer is associated with individual screen interactions. The lowermost layer in the layered design of Robotic process automation is the component layer or system layer . The Robotic Process Automation and this form technology is in robots creation.
Therefore, The last layer in layered design Is System layer so none of the above is the correct option.
Learn more about Robotic process automation from the link below.
https://brainly.com/question/41671370
How does VSEPR theory describe the double bonds between the central carbon atom and each oxygen atom of Co2?
The double bonds in CO2 are counted as single regions of electron density.
The valence shell electron pair repulsion theory VSEPR is a description of the shape of molecules based on the number of electron pairs that surround the central atom in the molecule. Double bonds are counted as a single region of electron density.
Hence, the two double bonds in CO2 are counted as two regions of electron density around the central carbon atom. Hence, the molecule is liner at a bond angle of 180 degrees.
Learn more about VSEPR theory: https://brainly.com/question/14225705
What is the frequency of the above wave?
Answer: is a measurement of how often a recurring event such as a wave occurs in a measured amount of time
Explanation:
After moving down a group in the periodic table, the number of valence electrons
the number of Valence electrons remains the same
For an electric toothbrush, is input energy equal to useful output energy? Explain
your answer.
No, input energy is not equal to useful output energy, if it is an electric toothbrush.
What is the useful type of energy produced in an electric toothbrush?Electrical Energy is the useful type of energy produced in an electric toothbrush.
If input energy is equal to useful output energy. This means that the total amount of energy that is in an isolated system (such as an engine or a generator) remains constant (conserved) over time.
However, the total amount of useful energy output of an isolated system is never equal to the total energy input.
Learn more about the electric toothbrush here:
https://brainly.com/question/8318282
#SPJ1
What is pseudoscience and how is it different from science
Answer:
a difference in attitude
Explanation:
It's just not science. ... The big difference Popper identifies between science and pseudo-science is a difference in attitude. While a pseudo-science is set up to look for evidence that supports its claims, Popper says, a science is set up to challenge its claims and look for evidence that might prove it false.
The Lewis dot model of an atom has seven dots. Which of the following is true about the atom?
A) it has seven energy levels.
B) it has one valance shell electron.
C) it requires one electron to complete it’s octet.
D) it requires seven other atoms to form a stable compound.
It requires one electron to complete its octet
The Lewis dot model of an atom has seven dots. The statement true about atom is,
It requires one electron to complete it’s octet.So, option C is correct one.
What is Lewis dot model?The simple representation of the valence shell electrons in a molecule.The Lewis structure is also known as Lewis dot formula, electron dot structure, Lewis dot structure, Lewis electron dot structure.It is used to show the arrangement of electrons around individual atoms in the molecule. In this representation valence electrons of atom is shows as dot or bonding electrons as a line between two atoms.What is valence electrons?The electron/electrons present in valence shell is called valence electrons. Each atoms require eight electrons to complete their octet or valence shell.
To learn more about Lewis dot model here.
https://brainly.com/question/17735032
#SPJ2
Explain what happens during soil depletion and also how we can help prevent this naturally without chemicals?
PLZ FAST TYY <3
Answer: create more healthy products for the soil and animals
Explanation:
what happens when you add vinegar to baking soda
Answer:
When baking soda is mixed with vinegar, something new is formed. The mixture quickly foams up with carbon dioxide gas. If enough vinegar is used, all of the baking soda can be made to react and disappear into the vinegar solution.
Explanation:
A chemist heats a gas within a sealed, rigid container. Which statement describes the changes that occur in the gas? (1 point)
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure
increases
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure decreases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
increases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
decreases
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
An increase in the temperature of a gas increases the collision rate of the molecules of the gas according to the kinetic theory.
With increased kinetic energy, the molecules of the gases collide more frequently with each other and the walls of the container.
The collision creates an increase in the magnitude of pressure inside the container.
More on the kinetic theory of gases can be found here: https://brainly.com/question/15354399?referrer=searchResults
Answer:
C
Explanation:
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
How many oxygen atoms
in a molecule of table sugar (C12H22011)?
ОА 45
ООО
В. 22
с 12
Op. 11
SUBMIT
Answer:
6.6242 x 10 ^ 24
Explanation:
This is the correct answer because you know there is 11 oxygen moles in 1 mole of sugar so using dimensional analysis you can solve it. You start will 11 moles of oxygen, and multiply by Avogadro's number(6.022 x 10 ^23) to get the amount of atoms. I don't see it as an answer, but I am confident in this, so I would ask your teacher specifically.
Hope this helps!
20 PIONTS PLZ HELP
What mass of calcium chloride is needed to make 330.0 mL of 0.125 M
solution?
Answer:
4.58g
Explanation:
1.) What is the molar mass of CaCI2?
= 110.98 g/mol
2.) Find the mols
[tex]conc = \frac{mol}{volume(l)} [/tex]
conc × volume= mol
0.125 M x 0.33 L = 0.04125mol ( 330mL was converted to "L" by dividing 330 by 1000)
3.) The mass(g)
g= mol x atomic weight
g= 110.98g/mol × 0.04125
= 4.58 g
# NOTE M = mol/L
Please help me with this
Beer Lambert Law Explanation
Answer:
The Beer–Lambert law, also known as Beer's law, the Lambert–Beer law, or the Beer–Lambert–Bouguer law relates the attenuation of light to the properties of the material through which the light is travelling.
Explanation:
Please Mark as brainliest
The balanced equation shows how sodium chloride reacts with silver nitrate to form sodium nitrate and silver chloride. NaCl AgNO3 Right arrow. NaNO3 AgCl If 4. 00 g of NaCl react with 10. 00 g of AgNO3, what is the excess reactant? AgCl NaCl AgNO3 NaNO3.
The reactant that has been present in excess in the reaction has been NaCl. Thus, option B is correct.
The balanced chemical equation has been:
[tex]\rm NaCl\;+\;AgNO_3\;\rightarrow\;NaNO_3\;+\;3\;AgCl[/tex]
From the balanced equation, for complete utilization of 1 mole of sodium chloride, 1 mole of silver nitrate has been used.
The moles of can be given as:
[tex]\text Moles\;=\;\dfrac{m}{mwt}[/tex]
Where, mass of Silver nitrate, [tex]m=10\;\text g[/tex]
Molecular mass of silver nitrate, [tex]mwt=168\9.87\;\text {g/mol}[/tex]
Substituting the values, moles of silver nitrate has been:
[tex]\rm Moles \;AgNO_3=\dfrac{10}{169.87} \\Moles \;AgNO_3=0.058\;mol[/tex]
Mass of sodium chloride, [tex]m=4\;\text g[/tex]
Molecular mass of sodium chloride, [tex]mwt=58.44\;\text {g/mol}[/tex]
Substituting the values, moles of sodium chloride has been:
[tex]\rm Moles\;NaCl=\dfrac{4}{58.44}\\Moles\;NaCl=0.068\;mol[/tex]
From the balanced chemical equation,
[tex]\rm 1\;moles\;AgNO_3=1\;moles\;NaCl\\0.058\;mol\;AgNO_3=0.058\;mol\;NaCl[/tex]
Since, the available moles of NaCl has been 0.06 mol, and used NaCl has been 0.05 mol. Thus, NaCl has been the excess reactant. Hence, option B is correct.
For more information about the excess reactant, refer to the link:
https://brainly.com/question/25685654
Answer:
B- NaCl
Explanation:
if this helped could you put this as the brainiest
What is the formula for this compound?
2 atoms of aluminum, 3 atoms of sulfur
Answer:
A
Explanation:
2 atoms of aluminum, 3 atoms of sulfur
Aluminum = Al
Sulfer = S
i just took the test
The formula for 2 atoms of Al and 3 atoms of S is Al₂S₃ and is named Aluminium Sulphide.
How are the formulas of the compound formed?Al has atomic no. =13, S has atomic no.=16
So the valencies of the given elements are
Al⁺³ and S⁻² to attain the noble gas configuration.
Al⁺³↘ ↙S⁻³
Al₂S₃
Cross multiply the valancies for the formation of molecular formula.
Hence, the formula is Al₂S₃.
Learn more about chemical formulas.
https://brainly.com/question/11995171
#SPJ2
five (5) muscular injuries and disease
Answer:
tendinitis.
carpal tunnel syndrome.
osteoarthritis.
rheumatoid arthritis (RA)
fibromyalgia.
bone fractures.
Why can't percent yield be greater than one hundred percent?
Answer:
Percent yield is the maximum amount of product that can be formed in a reaction. Matter cannot be created or destroyed according to the law of conservation of mass, so you cant have over 100%.
Explanation:
What is the difference between a conductor and an insulator?
How many protons, neutrons, and electrons are in an atom of beryllium with a mass number of 9?
A) 5 protons,5 electrons,4 neutrons
B) 4 protons,4 electrons,4 neutrons
C) 4 protons,4 electrons,9 neutrons
D) 4 protons,4 electrons,5 neutrons
Answer:
c / a
correct me if im wrong
Answer:
D) 4 protons, 4 electrons, 5 neutrons
What part of the periodic table does the neutrons tell us about the element?
Answer:
The neutrons tell us if it is an isotope or not, they also hold the atom together.
Explanation:
FOR THE LOVE OF GOD SOMEONE PLEASE HELP ME
WHAT IS THE OXIDATION NUMBER OF THE S IN SO^-2 ???
Answer:
The oxidation number for sulfur in SO2 is +4.
Explanation:
To find the oxidation number of sulfur, it is simply a matter of using the formula SO2 and writing the oxidation numbers as S = (x) and O2 = 2(-2) = -4. Using the rule and adding the oxidation numbers in the compound, the equation becomes x +(-4 ) = 0. Solving for x, it is evident that the oxidation number for sulfur is +4.
What does the answer of element 3Na2S2O3?
Answer:
Explanation:
3× 22+2×32+ 6×16=
66+64+96=236
What is the relationship between plants soil and fertilizers?
What is the one defining abiotic factor of a desert?
cold temperatures
high winds
little or no rainfall
high humidity
Hello! :p .
deserts are known to have little to no rain fall & drop to very low temperatures at night! I hope this helps!
Answer: little or no rainfall
Explanation: Precipitation, sunlight, and temperature are all abiotic factors.
Deserts have a lack of rainfall.
Some deserts are hot, some deserts can be cold too.
Abiotic factors are extreme temperatures of the day and night the fast winds the strong amount of sunlight scarcity of water
What are ocean currents?
Answer:
What are ocean currents?Ocean currents are continuous movements of water in the ocean that follow set paths, kind of like rivers in the ocean.why does fluorine have the highest electronegativity
Answer:
- Fluorine has 5 Electrons in its 2P shell
- Fluorine is so close to ideal Electron Configuration, the Electrons are held very tightly to the Nucleus.
Explanation:
Hopefully this was helpful!