Answer:
[H+] = 7.576x10⁻⁴M
pH = 3.12
Explanation:
Based on the equilibrium of the nicotinic acid in water:
HC6H4NO2(aq) + H2O(l) ⇄ C6H4NO2-(aq) + H3O+(aq)
Ka = [C6H4NO2-] [H3O+] / [HC6H4NO2]
As both C6H4NO2-(aq) and H3O+(aq) comes from the same equilibrium, we can approximate their concentration as X and replace:
Ka = [C6H4NO2-] [H3O+] / [HC6H4NO2]
1.4x10⁻⁵ = [X] [X] / [0.041M]
5.47x10⁻⁷ = X²
7.576x10⁻⁴M = X = [H+]And as pH is defined as -log [H⁺]
pH = 3.12A student measured the masses of four different-sized blocks. The student determined that each block had a mass of 50 grams.
(There is a small block, a little bit bigger block, a big block and the biggles block)
Which block has the least density?
Answer:..
Explanation:
which two options are examples of chemical changes?
A. A shinny metal bar glows red and expands when heated.
B. white piece of paper turns black and gives off a smell when burned
C. When two clear colorless liquids are mixed together, a white solid forms
D. A white powder mixed with a clear, colorless liquid makes a solution that is also clear, colorless liquid
Answer:
B
Explanation:
It's the only thing that actually changes into something different and when u burn it it makes chemicals
What specific portion of the gill is used to increase surface area though which gas (oxygen and carbon dioxide) exchange take place?
Answer:
gill lamellae
Explanation:
Gills in fishes are structures that permit fish to carry out gaseous exchange in water. Fishes exchange gases such as oxygen and carbon dioxide using gills.
Fish gills carry out their activity mainly through its major component called the gill lamellae. These are comb-like filaments which help increase the surface area of the gills in order to facilitate gaseous exchange
What two types of elements make up an Ionic bond ?
Answer:
Metals and Non-metals
Explanation:
A piece of metal has a mass of 0.650 kilograms, has a width of 0.136 meters, and has a length of 0.0451 meters.Part A: If the metal’s volume is 291 cm3, what is the height of the metal in centimeters? (The width & length values given above are in a different unit!)
Part B: What is the density of this piece of metal?
Answer:
height = 4.74 cm
density = 2.23 g/ cm³
Explanation:
Mass of metal = 0.650 kg (650 g)
Width = 0.136 m
Length = 0.0451 m
Volume of metal = 291 cm³
Height in cm = ?
density of metal =?
Solution:
Width = 0.136 m (0.136 m×100 cm/1m = 13.6 cm)
Length = 0.0451 m (0.0451 m×100 cm/1m = 4.51 cm)
First of all we will calculate the height:
Volume = height× width× length
291 cm³ = h × 13.6 cm × 4.51 cm
291 cm³ = h × 61.34 cm²
h = 291 cm³ / 61.34 cm²
h = 4.74 cm
Density:
d = m/v
d = 650 g/291 cm³
d = 2.23 g/ cm³
1. What 2 subatomic particles have charges? List the particle name and its charge.
Answer: Proton - positive charge (+)
Neutron - neutral charge (0)
Electron - negative charge (-)
Explanation:
What is the most highly populated rotational level of Cl2 (i) 25deg C and (ii) 100 deg C? Take B=0.244cm-1.This question should not be resubmitted, it is a textbook question from the Atkins physical chemistry txtbook. 10 e.
Answer:
i
[tex]J_{m} = 20 [/tex]
ii
[tex]J_{m} = 22.5 [/tex]
Explanation:
From the question we are told that
The first temperatures is [tex]T_1 = 25^oC = 25 +273 =298 \ K[/tex]
The second temperature is [tex]T_2 = 100^oC = 100 +273 = 373 \ K[/tex]
Generally the equation for the most highly populated rotational energy level is mathematically represented as
[tex]J_{m} = [ \frac{RT}{2B}] ^{\frac{1}{2} } - \frac{1}{2}[/tex]
Here R is the gas constant with value [tex]R =8.314 \ J\cdot K^{-1} \cdot mol^{-1}[/tex]
Also
B is given as [tex]B=\ 0.244 \ cm^{-1}[/tex]
Generally the energy require per mole to move 1 cm is 12 J /mole
So [tex]0.244 \ cm^{-1}[/tex] will require x J/mole
[tex]x = 0.244 * 12[/tex]
=> [tex]x = 2.928 \ J/mol [/tex]
So at the first temperature
[tex]J_{m} = [ \frac{8.314 * 298 }{2* 2.928 }] ^{\frac{1}{2} } - 0.5 [/tex]
=> [tex]J_{m} = 20 [/tex]
So at the second temperature
[tex]J_{m} = [ \frac{8.314 * 373 }{2* 2.928 }] ^{\frac{1}{2} } - 0.5 [/tex]
=> [tex]J_{m} = 22.5 [/tex]
A balloon contains 1.1 L of gas at a pressure of 0.80 atm. How will the volume
change if the pressure is increased to 2.0 atm?
Answer:
Final volume = 0.44 L
Explanation:
Given data:
Initial volume of balloon = 1.1 L
Initial pressure = 0.80 atm
Final volume = ?
Final pressure = 2.0 atm
Solution:
The given problem will be solved through the Boly's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
0.80 atm × 1.1 L = 2.0 atm × V₂
V₂ = 0.88 atm. L/ 2.0 atm
V₂ = 0.44 L
When you finish exercising, you are hot, tired, and sweating. After a bottle of juice, you feel a lot better. Which organ systems are working together in this scenario?
Answer:
Nervous and Excretory
Explanation:
The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.
Nervous and Excretory systems are working together in this scenario.
The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.
The blood flow increases, your brain is exposed to more oxygen and nutrients. Exercise also induces the release of beneficial proteins in the brain. Sweating cools the body when it becomes warm. When the body temperature rises, such as when exercising on a hot day, the dermal blood vessels dilate.The excretory system works with the endocrine system to help maintain homeostasis.Learn more:
brainly.com/question/17342396
If you collect 5.74 mL of O 2 at 298 K and 1.00 atm over 60.0 seconds from a reaction solution of 5.08 mL, what is the initial rate of the reaction
Answer:
7.71 × 10⁻⁴ M/s
Explanation:
The initial rate of the reaction can be expressed by using the formula:
[tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]
where the number of moles of O₂ = [tex]\dfrac{PV}{RT}[/tex]
where;
Pressue P = 1.00 atm
Volume V =5.74mL = (5.74 /1000) L
Rate R = 0.082 L atm/mol.K
Temperature = 298 K
[tex]= \dfrac{1.00 \ atm \times \dfrac{5.74 }{1000}L}{0.082 \ L \ atm/mol.K \times 298 K}[/tex]
= 2.35 × 10⁻⁴ mol
Δ[O₂] = [tex]\dfrac{moles \ produced - initial \ mole}{\dfrac{5.08 }{1000}L }[/tex]
Δ[O₂] = [tex]\dfrac{2.35 \times 10^{-4} M - 0 M}{\dfrac{5.08 }{1000}}[/tex]
Δ[O₂] = 0.04626 M
The initial rate = [tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]
= [tex]\dfrac{0.04626}{60}[/tex]
= 7.71 × 10⁻⁴ M/s
Fluorine is the first element in Group 17 of the periodic table. Bromine is the third element in the same group. Which statement is true of both
elements?
A. Both of their ions will have the same positive charge.
B. The charge on the ion formed by fluorine will be less than the charge on the bromine ion.
C. The charge on the ion formed by fluorine will be greater than the charge on the ion formed by bromine.
D. Both of their ions will have the same negative charge.
Answer:D. Both of their ions will have the same negative charge
Explanation:
what element has a higher ionization energy carbon or silicon
if u trust urself do it
Study these images.
4 photos of clouds. 1: Sky covered with large, flat layers of blue, grey clouds. 2: A tall, fluffy cloud shaped like an anvil. 3: Round, puffy clouds in a blue sky. 4: Thin, wispy clouds high in the sky.
Which image shows a cumulonimbus cloud?
1
2
3
Answer:
3
Explanation:
I wish you the best, its three or 2
Answer:
2
Explanation:
Edge 2021
Question 1 of 10
What is technology?
A. An understanding of something new.
B. The steps that engineers go through to create a product.
C. Something created using science for use by society.
D. A method that is used to solve problems,
SUBMIT
Answer:
C.
Explanation:
You can use the series of elimination for this. First, you look at A. Technology is not an understanding of something new, so we cross that out. Second, you look at B. Technology isn't a series of steps, so we can mark that one off. Third, you look at C. Technology is something created using science for use by society, so we can keep that in mind. Lastly, we check D. Technology doesn't match up to the definition, so we can cross that one out. The answer that would make the most sense would be D.
Solid diarsenic trioxide reacts with fluorine gas (F2) to produce liquid arsenic pentafluoride and oxygen gas (O2). Write the Qc for this reaction.
Answer:
QC= [O2]^3/[F2]^10
Explanation:
Please help will give brainliest _________________________________________________________________________________________________________________________________________
Answer:
What subject is this for?
Explanation:
If 25.98 mL of 0.1180 M KOH reacts with 52.50 mL of CH3COOH solution, what is the molarity of the acid solution?
Answer:
Explanation:
We shall use the formula S₁V₁ = S₂V₂
S₁ = .1180 M , V₁ = 25.98 mL
S₂ = ? , V₂ = 52.50 mL
.1180 M x 25.98 = 52.50 x S₂
S₂ = .0584 M
Molarity of the acid solution = .0584 M .
The concentration of the acid solution is 0.058 M.
The equation of the reaction is;
CH3COOH(aq) + KOH(aq) -----> CH3COOK(aq) + H2O(l)
The following are known;
Concentration of base CB = 0.1180 M
Volume of base VB = 25.98 mL
Concentration of acid CA = ?
Volume of acid VA = 52.50 mL
Number of moles of acid NA = 1
Number of moles of base NB = 1
Using;
CAVA/CBVB =NA/NB
CAVANB = CBVBNA
CA= CBVBNA/VANB
CA = 0.1180 M × 25.98 mL × 1/52.50 mL × 1
CA = 0.058 M
Learn more: https://brainly.com/question/24381583
Why does sodium chloride form a crystal lattice
Answer:
Ions of opposite charge strongly attract each other; those of like charges repel. As a result ions in an ionic compound are arranged in a particular manner.
Explanation:
Google is smart
A solution is made by mixing of 42.g water and 77.g of acetic acid HCH3CO2. Calculate the mole fraction of water in this solution.
Moles of [tex]H_2O[/tex] ,
[tex]n_{H_2O}=\dfrac{42}{2\times 1 + 16}=\dfrac{42}{18}\\\\n_{H_2O}=2.33\ moles[/tex]
Moles of acetic acid [tex]HCH_3CO_2[/tex] ,
[tex]n_{A.A}=\dfrac{77}{1 + 12 + 3 + 12 + 16\times 2}=\dfrac{77}{60}\\\\n_{A.A}=1.28\ moles[/tex]
Mole fraction of water :
[tex]M.F_{H_2O}=\dfrac{n_{H_2O}}{n_{H_2O}+n_{A.A}}\\\\M.F_{H_2O}=\dfrac{2.33}{2.33+1.28}\\\\M.F_{H_2O}=0.645[/tex]
Therefore, mole fraction of water in this solution is 0.645 .
Hence, this is the required solution.
Measurements show that unknown compound X has the following composition: element mass % carbon 41.0% hydrogen 4.58% oxygen 54.6% Write the empirical chemical formula of X.
Answer:
CHO
Explanation:
Carbon = 41%, Hydrogen = 4.58%, oxygen = 54.6%
Step 1:
Divide through by their respective relative atomic masses
41/ 12, 4.58/1, 54.6/16
3.41 4.58 3.41
Step 2:
Divide by the lowest ratio:
3.41/3.41, 4.58/3.41, 3.41/3.41
1, 1, 1
Hence the empirical formula is CHO
Answer:
The empirical formula of X is C3H4O3.
Explanation:
If the earth was a guava fruit, the space where the seeds are would be the core/mantle
What is the pH of a solution made by mixing 0.050 mol of NaCN with enough water to make a liter of solution
Answer:
pH = 11
Explanation:
The equilibrium of a weak base as NaCN in water is:
NaCN(aq) + H₂O(l) ⇄ OH⁻(aq) + Na⁺(aq) + HCN(aq)
And kb, the equilibrium constant, is:
Kb = [OH⁻] [HCN] / [NaCN]
Where Kb of NaCN is 2.04x10⁻⁵
In the beginning, the [NaCN] is 0.050mol / L = 0.050M.
Both [OH⁻] and [HCN] are produced from this equilibrium, and its concentration is X, that is:
2.04x10⁻⁵ = [X] [X] / [0.050M]
1.02x10⁻⁶ = X²
X = 1x10⁻³ = [OH⁻]
As pOH = - log [OH⁻]
pOH = 3.00
And pH = 14 - pOH
pH = 11
Observing a phenomenon in the lab includes which of the following?
Throwing away irrelevant items
Sorting through and disposing of police reports
Collecting evidence
Identifying unique features of evidence
Answer:
D
Explanation:
Identifying unique features of evidence
A laboratory is a place where scientific investigations and experiments are conducted. Observing a phenomenon in the lab includes identifying unique features of evidence. Thus, option D is correct.
What is observation?
An observation is said to be the deduction that is seen or heard and is due to the actions of the process or event that are gained from the information from a conducted experiment.
It is an important factor in an experiment and research and is used in the lab to falsify or prove the hypothesis. It is made based on the experimental setup and involves various steps.
The observations are used to draw conclusions and inferences based on the detailed identification of the characteristics of the evidence. The evidence supports the observation.
Therefore, option D. the features of evidence are the correct option.
Learn more about observations here:
https://brainly.com/question/28041973
#SPJ2
Into which two smaller groups are plants divided.
(a)vascular and nonvascular
(b)seed and seedless
(c)monocots and dicots
(d)seeds and spores
giving 17 points please help
4. Horizontal rows of the Periodic Table are called:
a, Clusters
Groups
b. Families
d) Periods
2 2 6 2 6 2 10 3
1s 2s 2p 3s 3p 4s 3d 4p
=
Answer:
ARSENIC
Explanation:
It has an atomic number of 33
plz help answer both will mark brainest
Which element will gain three electrons to form an anion?
A. aluminum
B. chromium
C. iron
D. nitrogen
Answer:
D represents the element nitrogen which will gain three valence electrons forming a 3 ion.
Answer:
answer is
Explanation:
D
PLEASE HELP! WILL DO BRAINLIEST! What do scientists call all of the compounds that contain carbon and are found in living things?
organic
inorganic
acidic
nonacidic
Answer:
acidic because of electrical issues and the body of electrical equipment
In the laboratory you dissolve 18.7 g of copper(II) bromide in a volumetric flask and add water to a total volume of 375mL.
Required:
a. What is the molarity of the solution?
b. What is the concentration of the copper(II) cation?
c. What is the concentration of the acetate anion?
Answer:
a) - 0.2 M
b) - 0.2 M
c)- 0
Explanation:
The chemical formula of copper (II) bromide is CuBr₂. Its molar mass (MM) is calculated as follows:
MM(CuBr₂)= MM(Cu) + (2 x MM(Br) = 63.5 g/mol + (2 x 80 g/mol)= 223.5 g/mol
a). Molarity = moles CuBr₂/1 L solution
moles CuBr₂ = mass/MM = 18.7 g x 1 mol/223.5 g = 0.084 mol
Volume in L = 375 mL x 1 L/1000 mL = 0.375 L
M = 0.084 mol/(0.375 L) = 0.223 M ≅ 0.2 M
b). When is added to water, CuBr₂ dissociates into ions as follows:
CuBr₂ ⇒ Cu²⁺ + 2 Br⁻
We have 1 mol Cu²⁺ (copper (II) cation) per mol of CuBr₂. Thus, the concentration of copper (II) cation is:
0.2 mol CuBr₂ x 1 mol Cu²⁺/mol CuBr₂ = 0.2 M
c). The concentration of acetate anion is 0. There is no acetate anion in the solution (the anion from CuBr₂ is bromide Br⁻).