Answer:
its a option neutralization takes place between acid and base plz mark me branliest
1/5 divided by 3/4 fraction
Answer:
4/15
Explanation:
we can write out an equation by doing (1/5 ÷ 3/4) and then switch the sign to multiplication and we can keep the first fraction the same (in this case 1/5) and then we flip the second fraction BUT when we flip the second fraction upside-down we have to change the symbol to multiplication (1/5x4/3)
then after that all we do is multiply the denominators and numerators :)
1 x 4 = 4
_______
5 x 3 = 15
answer would be 4/15
Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
milk
Answer:
HeterogeneousExplanation:
Milk seems to be homogeneous mixture but actually milk is a heterogeneous mixture and a colloid solution.Chromium is manufactured by heating a mixture of chromium(III) oxide with aluminium powder.
Cr2O3(s) + 2Al(s) → 2Cr(s) + Al2O3(s)
a=Calculate the mass of aluminium needed to react with 50 g of Cr2O3.
b=Calculate the mass of chromium produced from 50 g of Cr2O3.
c=Calculate the mass of chromium produced from 5 kg of Cr2O3.
d=Calculate the mass of chromium produced from5 tonnes of Cr2O3.
Note: 1 tonne = 1,000,000 g
Ar: Cr = 52, O = 16, Al = 27
explain what you would do expect caesium astatide to look like .will it be soluble in water ?explain your reasoning
Answer:
it will not be soluble in water Becoz it can only be
separated by passing it through silver nitrate solution
Explanation:
i hope you understand
Unit 4.2 quiz chemistry
Answer:
H₂SO₄ is the correct answer sorry im late
What is the function of white blood cells?
A) immunity
b) carry nutrients, waste
C) blood clotting
Answer:
A
Explanation:
They help fight infection and other disease
Answer:
immunity is the answer for this question
If a mechanical wave has a frequency of 0.147 Hz and a wavelength of 12.05 m, what is the velocity of the wave? (round to the hundredths place)
Answer:
0.147 Hz because I took the test
The velocity of a wave is the product of its frequency and wavelength. The velocity of wave with 0.147 Hz and 12.05 m is 1.77 m/s.
What is frequency ?The frequency of a wave is the number of wave cycles per unit time. Frequency is the inverse of time period of the wave. It is inversely proportional to the wavelength. Unit of frequency is Hz which is equivalent to s⁻¹.
The wavelength of a wave is the distance between two consecutive crests or troughs. The wavelength λ, and frequency ν of a wave is related to the velocity v of the wave as follows:
v = νλ
Given that,
frequency = 0.147 Hz
wavelength = 12.05 m
then, velocity = 0.147 Hz × 12.05 m = 1.77 m/s.
Therefore, the velocity of the mechanical wave is 1.77 m/s.
Find more on mechanical waves:
https://brainly.com/question/2995167
#SPJ6
If 220 mL of a 12.0 M HCl solution is diluted to 1000 mL, what will be the concentration of the new solution?
Answer:
2.64 M
Explanation:
Use the dilution equation M1V1 = M2V2, where:
M1 = 12.0 M HCl
V1 = 220 mL HCl
M2 = ?
V2 = 1000 mL HCl
(12.0 M HCl)(220 mL HCl) = M2(1000 mL HCl)
M2 = 2.64 M HCl
Mass of watch glass + filter paper = 105.98 g
Mass of watch glass + filter paper + crystallized product = 109.03 g
Mass of uncrystallized product (show work) =
Mass of methyl benzoate = 3.08 g
Volume of nitric acid used = 2.0 mL
Theoretical yield based on each of the starting materials
(Please use two Dimensional Analysis (DA) equations, one for the maximum amount of product obtainable from the amount of methyl benzoate you used and the other from the concentrated nitric acid, then use the lesser of the two to determine the Limiting Reagent; you must determine the number of moles in 2.00 mL of concentrated nitric acid [concentration 69.0% (w/w), and density (1.42 g/mL)].
Required:
a. Identity of the Limiting reagent (LR) based on the above two DA equations = __________
b. Max amount of product obtainable from the LR = ___________
c. Mass of the product you obtained: ____________
Answer:
Explanation:
Mass of uncrystallized product = (Mass of watch glass + filter paper + crystallized product) - (Mass of watch glass + filter paper)
Mass of uncreystaliized product = 109.03 gm - 105.98 gm
Mass of uncrystaliized product = 3.05 gm
For methyl benzoate;
mass = 3.08 g
no of moles = 3.08 g/ 136.15 g/mol = 0.0226 mole
It is possible for the formation of 1 mole of nitro methyl benzoate from a mole of methyl benzoate.
moles of nitro methyl benzoate that can be formed from 0.0226 moles of methyl benzoate = 0.0226 moles
∴
mass of nitro methyl benzoate = 0.0226 mol × 181.15 gm /mol
mass of nitro methyl benzoate = 4.098 gm
For HNO_3 solution:
mass = 1.42 gm/ml × 2.0 ml
mass = 2.84 gm
Mass of HNO3 in 2.84 gm solution[tex](69\% w/w)= 2.84 gm * \dfrac{69}{100 }[/tex]
= 1.9596 gm
Moles of HNO3 = [tex]\dfrac{ 1.9596 \ gm }{ 63.01 gm /mol}[/tex]
= 0.0311 mole
1 mol of HNO_3 can be formed from 1 mole of nitro methyl benzoate
Thus; moles of nitro methyl benzoate that can be formed from 0.0311 mole of HNO_3 = 0.02256 mole
The mass for nitro methyl benzoate can now be determined as:
= 0.0311 mole × 181.5 gm/mole
= 5.634 gm
Since the mass formed from methyl benzoate is lesser, then methyl benzoate serves as the limiting reagent.
The mass obtainable from the LR = 4.098 gm
What is 2AI(s) + FeO3(s) = Ai2O3(s) + 2Fe(s)
Answer:
it's a double displacement Reaction.
What happens to the pH when alkali is added to the distilled water?
Adding water to an acid or base will change its pH. ... The acid is becoming less acidic. Similarly, when an alkali is diluted with water the concentration of OH - ions decreases. This causes the pH of the alkali to fall towards 7, making the solution less alkaline as more water is added
Alkali is a chemical that is characterized by reacting with acids to produce salts. When alkali or base are added to the distilled water then pH increases.
What is pH?
The pH has been defined as the concentration of the hyronium or the hydrogen ions that releases when dissolved in water. The concentration of the hydroxide and the hydrogen are the determining factor of the acidic and basic nature.
The acids are characterized by the low pH (below 7) whereas, the basic compounds are characterized by the high pH (above 7). The pH scale is used to measure the pH of the solution.
When an alkali is added to the distilld water then hydroxide ions are relesed resulting in an increase in the basicity of the water sample. The pH range depends on the strong and weak base.
Therefore, the pH increases after ading alkaline solution.
Learn more about pH here:
https://brainly.com/question/8834103
#SPJ2
Suppose you are titrating vinegar, which is an acetic acid solution of unknown strength, with a sodium hydroxide solution according to the equation H C 2 H 3 O 2 + N a O H ⟶ H 2 O + N a C 2 H 3 O 2 HCX2HX3OX2+NaOH⟶HX2O+NaCX2HX3OX2 If you require 33.98 mL of 0.1656 M N a O H NaOH solution to titrate 10.0 mL of H C 2 H 3 O 2 HCX2HX3OX2 solution, what is the molar concentration of acetic acid in the vinegar? Type answer:
Answer:
[tex]M_{acid}=0.563M[/tex]
Explanation:
Hello there!
In this case, given the neutralization of the acetic acid as a weak one with sodium hydroxide as a strong base, we can see how the moles of the both of them are the same at the equivalence point; thus, it is possible to write:
[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]
Thus, we solve for the molarity of the acid to obtain:
[tex]M_{acid}=\frac{M_{base}V_{base}}{V_{acid}} \\\\ M_{acid}=\frac{33.98mL*0.1656M}{10.0mL}\\\\ M_{acid}=0.563M[/tex]
Regards!
A change resulting in one or more new substances being formed is a?
A. nuclear reaction
B.physical property
C. chemical change
D.physical change
Answer:
C. Chemical change
Explanation:
A physical change is where something is changed but it doesnt affect the build up of the chemical. For example, if you broke sticks and threw them on the ground, that would be a physical change because the change is happening to the physical being of the object and not its chemical buildup. However, if you lit those sticks on fire, that would be considered a chemical change because you end up with two substances, ash and the remnants of the stick. A nuclear reaction would result in something blowing up so its not that. And a physical property is like what it looks like or how it smells. Hope I helped you!
PCR amplification utilizes ________ template to produce a ________ product. For this question, select the answer that best describes the process as a whole: the nature of the template you used (the starting template added to the reaction) and the nature of the final product produced in your PCR analysis that you ran out on a gel will apply here.
Answer:
Double-stranded/Double-stranded
Explanation:
The PCR which is popularly known as polymerase chain reaction is the technique that uses the single copy of DNA to make thousands or levels a huge number(in terms of millions) of duplicates of that DNA.
The PCR is a laboratory procedure that is utilized to make various duplicates of a section of DNA as depicted previously. It is an unmistakable strategy.
There are 3 fundamental advances in PCR:
Denaturing
Annealing
Extending
In denaturing measure requires warming of the double-stranded DNA template to isolate it into a solitary strand. Eventually, it resulted into a double-stranded item.
Which if the following numbers in your personal life are exact numbers?
A. Your cell phone number
B. Your weight
C. Your IQ
D. Your driver's license number
E. The distance you walked yesterday
Answer:
I think D
Explanation:
Your cell phone number and your driver's license number are the numbers of your personal life that are exact.
In this context, an exact number refers to a number that if it undergoes any modification will not refer to the same thing that it referred to before that modification.
For example, my phone number is 12345. This number is exact because it cannot be changed because or else it would cease to be my phone number, that is, if someone wants to call me and writes the number 12346 it is no longer my number.
Addicionally, if my driver's license number is 112233 it is an exact number because if it is modified it would be the number of another driver.
According to the above, options B, C, and E are incorrect because they are inaccurate numbers because if they are modified they all refer to me and they would not change their meaning.
Learn more in: https://brainly.com/question/17093923
Why does an asteroid get hotter when it goes close to the sun?
What is the other product for this reaction? Hbr + NaOH —> ( select 2)
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: HBr + NaOH = nabr + h2o
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Solid iron is mixed with a solution of copper (I) nitrate to form iron (III) nitrate solution and metal copper. (what is the equation)
Answer:
Fe + 3CuNO₃ → Fe(NO₃)₃ + 3Cu
Explanation:
Solid Iron = FeCopper (I) nitrate = CuNO₃ (Nitrate, NO₃⁻, always has a charge of -1).Iron (III) nitrate = Fe(NO₃)₃ (That way the compound has an overall neutral charge)Metal Copper = CuWriting the equation using symbols leaves us with:
Fe + CuNO₃ → Fe(NO₃)₃ + CuIt is not balanced yet. Now we balance the NO₃ species on the left side:
Fe + 3CuNO₃ → Fe(NO₃)₃ + CuFinally we balance the Cu species on the right side:
Fe + 3CuNO₃ → Fe(NO₃)₃ + 3CuExpress
as
ordinary numbers.
3 x 10^0=
The correct value of m, n, x and y to obtain a balanced equation is?
m B2O3(s) + n HF(l) → x BF3(g) + y H2O(l)
a.
m=1, n=1, x=1 and y=1
b.
m=1, n=6, x=2 and y=3
c.
m=1, n=1.5, x=1 and y=1
d.
m=2, n=12, x=4 and y=6
Answer:
d
Explanation:
answer d makes the equation balance
PLEASE HELP!!
A scientist places a pH meter in a sample of concentrated potassium hydroxide (KOH). The scientist slowly adds nitric acid (HNO3) to the KOH and monitors the pH. Describe how the pH and hydronium ion concentration will change in the solution as the acid is added.
Answer:
pH of the solution will decrease & hydronium ion concentration will increase in the solution as the acid is added.
Explanation:
Radiation from which type of decay has the most energy?
A. Alpha decay
B. Electromagnetic decay
C. Beta decay
D. Gamma decay
Pls answer quick
Answer: D
Explanation:
Radiation from gamma decay has the most energy and the correct option is option D.
What is Radioactive Decay?To become more stable, the nuclei undergo radioactive decay. In this process, the nuclei give off energy and may also emit charged particles of matter.
Types of radioactive decay include alpha, beta, and gamma decay. In alpha and beta decay, both particles and energy are emitted. In gamma decay, only energy, in the form of gamma rays, is emitted.
In the gamma decay, a nucleus changes from a higher energy state to a lower energy state through the emission of electromagnetic radiation.
Therefore, Radiation from gamma decay has the most energy and the correct option is option D.
Learn more about Radioactive Decay, here:
https://brainly.com/question/1770619
#SPJ3
A student places 2 mL of 2% ethanolic silver nitrate solution into test tube. They add 2 drops of an unknown compound into the test tube while gently mixing. After five minutes, the student heated the test tube in a water bath and a white precipitate formed. They added 2 drops of 1 M nitric acid to the mixture which was cooled to room temperature and still noticed the precipitate did not dissolve in response to the nitric acid. What compound is most likely the unknown
Answer:
hi
Explanation:
i am smart but i need this app cuz some are realy hard
Heat flows from hotter objects to colder objects until it reaches a state where heat is no longer flowing.What have the objects reached when heat is not longer flowing?
what makes up the cell menbrane
With few exceptions, cellular membranes — including plasma membranes and internal membranes — are made of glycerophospholipids, molecules composed of glycerol, a phosphate group, and two fatty acid chains. Glycerol is a three-carbon molecule that functions as the backbone of these membrane lipids.
Explanation:
the principal components of plasma membrane are lipids phospholipid and cholesterol proteins and carbohydrates
help with my science about the human body
Answer:
am sorry what exactly is your question?
How can you determine if elements have the same properties?
Answer:
You will know if elements have the same properties if they are in the same column (up and down) on the periodic table.
Explanation:
Ex: Lithium and a hydrogren has the same properites bcause they are both on the same line/column. Columns are up and down the table and rows are left and right. Hope this helps
The fizz in the soda that we drink is carbonic acid. Leaving the soda can open to the environment separates the carbonic acid into water and carbon dioxide. What type of reaction is this and what is the resulting product?
Answer:
The reactionnis known as a decomposition reaction
The equation of the reaction is given below as:
H₂CO₃ -----> H₂O + CO₂
Explanation:
A reaction in which a single compound is split into two or more simpler substances is known as a decomposition reaction.
In the reaction in which when a soda can is opened and left to the environment, the fizz in the soda, carbonic acid, separates into water and carbon dioxide is an example of a decomposition reaction.
The equation of the reaction is given below:
H₂CO₃ -----> H₂O + CO₂
In the reaction above, a larger molecular weight compound, carbonic acid with the molecular, H₂CO₃ is splits into two simpler substances of smaller molecular weight, water, H₂O and carbon dioxide, CO₂.
This reaction rate is made faster by an increase in temperature and by a decrease in pressure of the soda.
This timeline woulchre useful to someone who was writing a report titled
Potassium chlorate, a common oxidizing agent in fireworks and matchheads, undergoes a solid-state disproportionation reaction when heated:
4KClO3 (s) ⟶ Δ3KClO4 (s) + KCl (s).
Use ΔHf ° and S° values to calculate ΔG_sys ° (which is ΔGrxn °) in kJ at 25°C for this reaction.
Answer:
Explanation:
[tex]\text{From the information given:}[/tex]
[tex]\text{The chemical reaction is : } 4 KClO_{3(s)} \to 3 KClO_{4(s)} + KCl_{(s)}[/tex]
[tex]\text{To find} \ \Delta G^0_{rxn}\ \text{using the formula}: \\ \\ \Delta G^0_{rxn} = \sum n_p \times \Delta _f G^0 (Products) - \sum n_R \times \Delta _fG^0 ( Reactants) \\ \\ where; n_p = \text{no of moles of products } \ and; \\ \\ n_R = \text{no of moles of reactants }[/tex]
[tex]\implies G^0_{rxn} = 3 \times \Delta _fG^0 [KClO_4{(s)}] + \Delta_fG^0[KCl_{(s)}] - 4 \times \Delta _f G^0 [ KClO_3 (s) ][/tex]
[tex]\Delta _fG^0 \ values \ at \ 25^0 \ C (298 \ K) are\ given \ as:\\\\ \Delta _fG^0 [KClO_4(s)] = -303.09 \ kJ \\ \\ \Delta _fG^0 [KCl(s) ] = - 409.14 \ kJ \\ \\ \Delta_f G^0 [KClO_3_{(s)}] = -296.25 \ kJ \\ \\ replacing \ the \ above \ values \ into \ equation (1) ; then:\\ \\ \\\Delta G^0_{rxn} = 3 *(-303.09) + (-409.14) - 4*(-296.25) \ kJ \\ \\ = (-909.27 - 409.14 + 1185) \ kJ \\ \\ = -133.41 \ kJ \\ \\ \mathbf{\Delta G^0_{rxn} = -133.4 \ kJ }[/tex]
The standard free energy change of the reaction is -133 kJ.
From the reaction equation, we have; 4KClO3 ⇄ 3KClO4 (s) + KCl (s). The standard free energy of formation of each specie is given below;
ΔG°f KClO3 = -296.35 kJ
ΔG°f KClO4 = -303.09 kJ
ΔG°f KCl = -409.14 kJ
Hence;
ΔG°rxn = [3(-303.09)] + ( -409.14)] - [(4( -296.35))]
ΔG°rxn = (-909.27) + (-409.14) - (-1185.4)
ΔG°rxn = -133 kJ
Learn more about free energy: https://brainly.com/question/953809