Answer:
two of the same instrument playing notes at slightly different frequencies
Explanation:
The correct answer is two of the same instrument playing notes at slightly different frequencies.
What is the frequency?Frequency is the number of occurrences of a periodic event per unit of time. In the context of sound waves, frequency refers to the number of complete cycles of a sound wave that occur in one second and is measured in units of Hertz (Hz).
In this question,
A beat frequency occurs when two sound waves with slightly different frequencies interfere with each other, resulting in a periodic variation in the amplitude of the resulting wave. The beat frequency is equal to the difference in frequency between the two original sound waves.
When two of the same instrument play notes at slightly different frequencies, the sound waves produced by each instrument will have slightly different frequencies due to differences in tuning or other factors. When the two sound waves interfere with each other, they will produce a beat frequency equal to the difference between their frequencies. This beat frequency will be audible as a periodic variation in the loudness or intensity of the sound.
In the other statements, There will not be any beat frequency because the sound waves being produced have either the same frequency or very different frequencies, which do not interfere with each other in a way that produces beats.
Therefore, The statement two of the same instrument playing notes at slightly different frequencies is correct.
To learn more about the Doppler effect click:
https://brainly.com/question/3795295
#SPJ3
tell types of instruments
Answer:
Instrument Use
Accelerometer Measures acceleration
Altimeter Measures altitude of an aircraft
Ammeter Measures electric current in ampere
Anemometer Measures wind speed
A baseball player notices the ball when it is 3.4 m above the
ground, traveling at 4.4 m/s. He wants to make the catch when
the ball is 1.5 m above the ground, how long does it take to reach
his glove?
Find the distance the ball travels:
3.4 meters - 1.5 meters = 1.9 meters
Now divide the distance the ball travels by the speed:
1.9 meters / 4.4 m/s = 0.43 seconds
Answer:
Explanation:
s = s₀ + v₀t + ½at²
There are an infinite number of solutions to this question as posed because we are not told the direction of the initial velocity.
Assuming ground is level and origin and UP the positive direction
The shortest amount of time possible is when the initial velocity is straight down
1.5 = 3.4 - 4.4t + ½(-9.8)t²
0 = -4.9t² - 4.4t + 1.9
t = (4.4 ±√(4.4² - 4(-4.9)(1.9))) / (2(-4.9))
positive answer is
t = 0.32 s
The longest amount of time possible is when the initial velocity is straight up.
1.5 = 3.4 + 4.4t + ½(-9.8)t²
0 = -4.9t² + 4.4t + 1.9
t = (-4.4 ±√(4.4² - 4(-4.9)(1.9))) / (2(-4.9))
positive answer
t = 1.22 s
If the initial velocity is horizontal, meaning no vertical velocity
1.5 = 3.4 + 0t + ½(-9.8)t²
-4.9t² = -1.9
t² = 0.38775...
t = 0.62 s
Any angle between UP and Down will have a different initial vertical velocity and result in a different time to catch height.
It appears from the comments on the other answer, that I have shown you how to arrive at three of the four possible solutions. The initial direction is very important.
Conservation of Energy Roller Coaster A roller coaster cart of mass 100kg travels on a track with one loop. Fill in blanks A-H. А. KE=OJ PE=120000J h= А. V= B B KE=___CE PE=60000J h= _D V= E KE=__F PE=40000J h=__G_ V= KE= PE= h=Om v= K D E F G H K
(a) The height of the roller coaster at 120,000 potential energy is 122.45 m.
(b) The velocity of the roller coaster at 0 J kinetic energy is 0.
(c) The height of the roller coaster at 60,000 potential energy is 61.23 m.
(d) The velocity of the roller coaster at 60,000 J kinetic energy is 34.64 m/s.
(e) The height of the roller coaster at 40,000 potential energy is 40.82 m.
(f) The velocity of the roller coaster at 80,000 J kinetic energy is 40 m/s.
The given parameters:
mass of the roller coaster, m = 100 kgWhen the kinetic energy = 0 and potential energy = 120,000 J
The height of the roller coaster is calculated as follows;
P.E = mgh
[tex]h = \frac{P.E}{mg}\\\\h = \frac{120,000}{100 \times 9.8} \\\\h = 122.45 \ m[/tex]
Since the kinetic energy = 0, the velocity of the roller coaster = 0
When the potential energy, P.E = 60,000 J, the kinetic energy, K.E is calculated as;
P.E + K.E = M.A
P.E + K.E = 120,000
60,000 + K.E = 120,000
K.E = 120,000 - 60,000
K.E = 60,000 J
The height of the roller coaster at 60,000 potential energy is calculated as follows;
[tex]h = \frac{P.E}{mg} \\\\h = \frac{60,000}{100 \times 9.8} \\\\h =61.23 \ m[/tex]
The velocity of the roller coaster at 60,000 J kinetic energy is calculated as follows;
[tex]K.E = \frac{1}{2} mv^2\\\\v^2 = \frac{2K.E}{m} \\\\v = \sqrt{ \frac{2K.E}{m}} \\\\v = \sqrt{ \frac{2\times 60,000}{100}}\\\\v = 34.64 \ m/s[/tex]
When the potential energy, P.E = 40,000 J, the kinetic energy, K.E is calculated as;
P.E + K.E = M.A
40,000 + K.E = 120,000
K.E = 120,000 - 40,000
K.E = 80,000
The height of the roller coaster at 40,000 potential energy is calculated as follows;
[tex]h = \frac{P.E}{mg} \\\\h = \frac{40,000}{100 \times 9.8} \\\\h = 40.82 \ m[/tex]
The velocity of the roller coaster at 80,000 J kinetic energy is calculated as follows;
[tex]v = \sqrt{\frac{2K.E}{m} } \\\\v = \sqrt{\frac{2\times 80,000}{100} } \\\\v = 40 \ m/s[/tex]
Learn more here:https://brainly.com/question/19969393
Match the sport/physical activity in column B with the primary physical fitness component needed to perform it in column A . Write the letters of your answer in your activity notebook.
1. Power
A. Patintero
2. Speed
B. Marathon
3. Balance
C. dodgeball / tamaan bata
4. Coordination
D. 100m sprint
5. Flexibility
E. badminton and table tennis
6. Muscular Strength
F. exercise and proper diet
7. Agility
G. hopscotch/piko
8. Cardiorespiratory Endurance
H. Shotput
9. Reaction time
I. Archery
J. Leg Splits and yoga poseso
sagutan po plss
. Power
Patintero
, also known as harangang-taga or tubigan, (Intl. Translate: Escape from the hell or Block the runner) is a traditional Filipino children's game. Along with tumbang preso, it is one of the most popular outdoor games played by children in the Philippines.[1]
2. Speed The Barkley Marathonsis an ultramarathon trail race held in Frozen Head State Park near Wartburg, Tennessee. If runners complete 60 miles (97 km) this is known as a "fun run." The full course is about 100 miles (160 km). The race is limited to a 60-hour period and takes place in late March or early April of each year.
if the Periodic time of an oscillating object Triples then its frequency will?
Answer:
it would decrease
Explanation:
f=1/T
This question has two parts. First, answer part A. Then, answer part B. Part A: Which statement best summarizes the theme of the text? O A. You do not always recognize what is most valuable. O B. Keep your friends close, but your enemies closer. W O C. Fine possessions do not make a fine person. h 0 D. The best things come in small packages. Part B: Which evidence from the text best supports your answer in part A? O A. "The other animals of the forest bowed to him, and they often spoke of his antlers with admiration." B. "The Stag was so engrossed that he did not notice that a Lion had crept up alongside him." C. ". . . but the branches of some of the trees hung low, and vines curled around them." D. "The long legs that I hated would have saved me, but the antlers that I loved have led to my destruction!"
Answer: for part A Its A the ANSWER for part B its D
Explanation:
Answer:
a and b
Explanation:
Two blocks are set in a pully system as shown in fig below. Block A sits on the frictionless table while block B hags freely. The pully is light and frictionless towards the light string that runs over it. If the Block A has mass of 3.4 kg and Block has 3.5 kg, what would be the magnitude of the acceleration (in ms-2) of the blocks? [g = 9.8 ms=2]
Answer:
Explanation:
F = ma
a = F/m
a = mBg / (mB + mA)
a = 3.5(9.8)/(3.5 + 3.4)
a = 4.971014...
a = 5.0 m/s²
If you want to use individual Free Body Diagrams
mass A will have downward weight and upward normal forces equal at mAg
and a horizontal force of string tension T
F = ma
T = mAa
mass B will have a downward force of mBg and an upward force of T
mBg - T = mBa
substitute for T
mBg - mAa = mBa
mBg = a(mB + mA)
a = mBg / (mB + mA) which is identical to the above answer.
Read the sentence from the text. “They are as glossy as satin or sunlight reflecting off water!" What does the word glossy mean in the sentence? O A. pointed o B. shiny O C. small O D. strong
Answer:
b Shiny
Explanation:
Trust me it's right
Which of the following is a fundamental unit of the SI system of units?
A) kilometer
B) joule
C) kilogram
D) gram
E) newton
The answer is C) kilogram
The SI unit in the given options is kilogram, the correct option is C.
What is SI unit?The most common unit of measurement is the standard unit. These units are standardized, which means that everyone understands an object's size, weight, and other properties.
Standard Units of Measurement have fixed values that cannot be changed.
The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system.
The SI is a coherent system of units of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), and so on.
Thus, the correct option is C.
For more details regarding SI units, visit:
https://brainly.com/question/12750330
#SPJ2
6) An object is released from rest at the top of a ramp inclined at 30. degrees up from the horizontal. Due to friction, the ramp is only 20. % efficient. What is the object's speed after it slides down ALONG the ramp for 2.0 m? *
Answer:
Explanation:
I've been doing these types of problems for many years and I don't think I've ever seen an "efficiency" rating on a ramp.
I'm going to ASSUME that 20% efficient means that 80% of the Potential energy that gets converted becomes system internal heat energy.
Potential energy at the start of a 2.0 m slide
PE = mgh = mg2sin30 = mg2(½) = mg J
0.8mg J gets converted to heat and 0.2mg converts to kinetic energy
0.2mg = ½mv²
v² = 0.4g
v = √(0.4(9.8)) = 1.979898... ≈ 2.0 m/s
give with an example a cause where the velocity of an object is zero but its acceleration is not zero .
Answer:
At the highest point when you toss a ball into the air.
Explanation:
At the higest point of a trajectory of a ball, the velocity is zero for a split second and there is no speed and direction. However, there still is acceleration of -10 m/s^2 because the force of gravity is still acting upon it at that point.
Hi there!
An example of this could be when a ball is thrown vertically into the air and reaches the TOP of its trajectory.
When an object is thrown with a vertical velocity, the acceleration due to gravity results in a decrease in its positive (upward) velocity until it reaches its highest point, where the instantaneous velocity = 0 m/s and the object begins to fall back down (negative velocity).
Additionally, throughout its entire trajectory, the ball experiences an acceleration due to gravity of g = 9.8 m/s², even at its highest point where there is a velocity = 0 m/s.
Why is the sky blue and why do we get a sunset
Answer:
Small particles of dust and pollution in the air can contribute to (and sometimes even enhance) these colors, but the primary cause of a blue sky and orange/red sunsets or sunrises is scattering by the gas molecules that make up our atmosphere. Large particles of pollution or dust scatter light in a way that changes much less for different colors.
Explanation:
Anita Knapp needs to get hay to cows in a frozen field using an airplane flying
80.0 m/s, at a height of 300,m. If at the last minute, how far from the cow would
she have to release the hay in order to hit the cow?*
756 m
626m
700m
575 m
Other:
Answer:
626m
Explanation:
Lab report on velocity of sound
electron and proton are projected with same velocity normal to the magnetic field which one will suffer greater deflection? why
Answer:
Explanation:
The deflection of a charged particle by a magnetic field is proportional to its electric charge and to its velocity. The deflection is also inversely proportional to its mass. So given a proton and an electron going at the same velocity in a magnetic field and having equal (but opposite) electric charge the electron will deflect much more since the ratio of the masses is 1836.
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.120 rev/s . As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight.
Answer:
Explanation:
0.120 rev/s(2π rad/rev) = 0.24π rad/s
At the highest point of the arc, gravity must supply the required centripetal acceleration. As the normal force is 1/4 of his normal weight, then 3/4 of gravity acceleration must be used as centripetal acceleration
0.75g = ω²R
R = 0.75(9.81) / (0.24π)²
R = 12.942198...
R = 12.9 m
The radius of the circle is equal to 12.95m which is rotating with an angular velocity of 0.120 rev/s.
What is vertical circular motion?A body spins in a vertical circle so that its motion at different points is different from the motion of the body is said to be vertical circular motion.
The velocity and tension vary in maximum magnitude from the lowest to the highest position because of the effect of the gravitational force of the earth.
Given, the angular velocity of the Ferris wheel, ω = 0.120 rev/s
ω = 0.120 rev/s × 2π rad/rev
ω= 0.7536 rad/s
If r is the radius of the circle and 'm' is the mass of the jack.
From newton's second law of motion, the net force will be equal to
mg - N = mrω²
mg - (mg/4) = mrω²
r = 3g/4ω²
r = 3×9.81 / (4× 0.7536)
r = 12.95 m
Therefore, the radius of the circle in which the jack travels is equal to 12.95m.
Learn more about vertical circular motion, here:
https://brainly.com/question/22810476
#SPJ2
Your question is incomplete, most probably the complete question was,
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.120 rev/s. As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight. What is the radius of the circle in which Jack travels?
what would happen if gravity were to stop everywhere?
Answer:
everything will float up and go up to space and die
Explanation:
gravity keeps us down and once it stops everything will float up. And if it were to stop everywhere everything and everyone will die and everything will be destroyed.
Acceleration of a Car A car traveling along a straight road at accelerated to a speed of over a distance of ft. What was the acceleration of the car, assuming that it was constant
Answer:
how many feet?
Explanation:
After passing point 2 the hill becomes frictionless and the ring's rotational velocity remains constant. What is the linear velocity of the ring at point 3 in m/s
The energy in the system is given by the initial potential energy at the point 1.
The linear velocity at point 3, is approximately 33.59 m/s.
Reasons:
The parameters are;
Height at point 1, h₁ = 83 m
Radius of the ring = 8 cm
Mass of the ring, M = 8 kg
Height at point 2, h₂ = 32 m
At point 2, we have;
Change in potential energy = Kinetic energy
Which gives;
(83 - 32) × 9.81 × 8 = 0.5 × 8 × v² + 0.5 × 8 × 0.08² × (v/0.08)²
Which gives;
v ≈ 22.37 m/s
At point 3, the rotational kinetic energy remains constant while the
translational kinetic energy increases as follows;
K.E. at point 3 = Initial kinetic energy + Change in potential energy
Which gives;
K.E. at point 3 = 0.5 × 8 × v₃³ ≈ 0.5×8×22.37² + 32×9.81×8
[tex]v_3^2 = \dfrac{0.5 \times 8 \times 22.37^2 + 32 \times 9.81 \times 8}{0.5 \times 8} = 1128.15[/tex]
v₃ ≈ √(1128.15) ≈ 33.59
The linear velocity at point 3, v₃ ≈ 33.59 m/s
Learn more here:
https://brainly.com/question/15076457
The probable question parameters as obtained from a similar question online are;
Height at point 1, h₁ = 83 m
Radius of the ring = 8 cm
Mass of the ring, M = 8 kg
Height at point 2, h₂ = 32 m
An object is travels 50 m in 4 s. It had no initial velocity and experiences constant acceleration. What is the magnitude of the acceleration?
Free-fall Acceleration is -10 m/s^2
I also need the Formula
Answer:
Explanation:
s = s₀ + v₀t + ½at²
50 = 0 + 0(4) + ½a(4²)
50 = 8a
a = 50/8 = 6.25 m/s²
Find the self-inductance of a 1700-turn solenoid 55 cm long and 4.0 cm in diameter. Express your answer with the appropriate units.
The self-inductance of the solenoid is 8.25 mH.
The given parameters;
number of turns, N = 1700 turnlength of the solenoid, l = 55 cm = 0.55 mdiameter of solenoid, d = 4 cmradius of the solenoid, r = 2 cm = 0.02 mThe area of the solenoid is calculated as follows;
[tex]A = \pi r^2\\\\A = \pi \times (0.02)^2\\\\A = 0.00125 \ m^2[/tex]
The self-inductance of the solenoid is calculated as follows;
[tex]L = \frac{\mu_o N^2 A }{l} \\\\L = \frac{(4\pi \times 10^{-7}) \times 1700^2 \times 0.00125}{0.55} \\\\L = 0.00825 \ H\\\\L = 8.25\ mH[/tex]
Thus, the self-inductance of the solenoid is 8.25 mH.
Learn more here:https://brainly.com/question/15612168
what is the acceleration of the cart at t=8 seconds?
a) 0 m/s^2
b) 10 m/s^2
c) 20 m/s^3
d) -20m/s^2
What is the acceleration of the cart at t=8 seconds?
a) 0 m/s^2b) 10 m/s^2c) 20 m/s^3d) -20m/s^2Hence the answer us letter a) 0 m/s^2.
That's all I know, Hope it help :)
NO LINKS
According to "Patterns of Change," select the ways that rocks are changed naturally over time. Choose three answers. O A. water O B. location O C. animals D. wind O E. people O F temperature
Answer: A , D & F
Explanation:
Saturn's mass is 5.68 x 1024 kg and its radius is 6.03 x 107 m. A. Calculate the gravitational field strength at Saturn's surface. (2 marks) B. Calculate the force of gravity at Saturn's surface on an object with a mass of 50 kg.
Hi there!
A.
We can calculate the gravitational field strength using the following equation:
[tex]g = \frac{Gm_p}{r^2}[/tex]
G = Gravitational Constant
mp = mass of planet (kg)
r = radius (m)
Plug in the given values:
[tex]g = \frac{(6.67*10^{-11})*(5.68*10^{24})}{(6.03*10^7)^2} = \boxed{0.104 N/kg}[/tex]
B.
The force can be calculated using:
[tex]F_g = \frac{Gm_1m_2}{r^2}[/tex]
Plug in the values:
[tex]F_g = \frac{(6.67*10^{-11})(5.68*10^{24})(50)}{(6.04*10^7)^2} = \boxed{5.209N}[/tex]
Answer:
[tex]\boxed {\boxed {\sf g=0.104 \ N/kg \ and \ F_g= 5.2 \ N }}[/tex]
Explanation:
A. Gravitational Field Strength
The gravitational field strength can be calculated using the following formula:
[tex]g= \frac{Gm}{r^2}[/tex]
G, or the universal gravitational constant, is 6.67 × 10⁻¹¹ N*m²/kg². The mass of Saturn is 5.68 × 10²⁴ kilograms. The radius of Saturn is 6.03×10⁷ meters.
Substitute these values into the formula.
[tex]g= \frac{ (6.67 \times 10^{-11} \ N*m^2/kg^2) (5.68 \times 10^{24} \ kg)}{(6.03 \times 10^{7} \ m )^2}[/tex]
Multiply the numerator and square the denominator.
[tex]g= \frac{ 3.78856 \times 10^{14} \ N *m^2/kg }{3.63609 \times 10^{15} \ m^2}[/tex]
Divide.
[tex]g= 0.1041932405 \ N/kg[/tex]
The original measurements of mass and radius have 3 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 1 in the ten-thousandth place tells us to leave the 4 in the thousandth place.
[tex]\boxed {g \approx 0.104 \ N/kg}[/tex]
B. Force of Gravity
The force of gravity is calculated using the following formula:
[tex]F_g= mg[/tex]
The mass of the object is 50 kilograms. We just calculated the gravitational field strength, which is 0.104 Newtons per kilogram. Substitute these values into the formula.
[tex]F_g= (50 \ kg)(0.104 \ N/kg)[/tex]
Multiply. The units of kilograms cancel.
[tex]\boxed {F_g=5.20 \ N}[/tex]
the c component of vector a is 5.3 units, and it’s y component is -2.3 units. the angle that vector a makes with the +x axis is closest to
110
160
23
340
250
Answer:
340
Explanation:
Sorry I don't know how to do this one yet, I just found the answer in a textbook.
The angle that vector a makes with the +x axis is closest to 23.
What is direction of a vector?The direction of a vector is represented tangent of angle equal to the ratio of the y component and the x component of the vector quantity.
tangent of angle = y/x
angle = tan⁻¹ (-2.3/5.3)
angle = 23.46°
Thus, the angle that vector makes with +x is 23.
Learn more about direction of vector.
https://brainly.com/question/12002625
#SPJ2
Which region of electromagnetic spectrum will provide photons of the least energy
Answer:
Explanation:
Radio waves
Radio waves have photons with the lowest energies. Microwaves have a little more energy than radio waves. Infrared has still more, followed by visible, ultraviolet, X-rays and gamma rays.
True or False: The basketball should be dribbled below the waist.
1.25 is the closest to 1.04 or not I want to answer please. I think it's true, but I want to prove it scientifically, please.
Answer/Explanation:
It False, because if You Round Both of them..
1.25= 1.30
1.04= 1.00
it's like, 1 dollar and 4 cents; compared to 1 dollar and 25 cents. Obviously 25 cents is a lot more than 4 cents.
A Pump discharges water at 1MPaa and 165 deg C. Determine the specific volume and internal energy of the water at the discharge point.
This problem is describing a pump from which water is discharged at 1 MPa and 165 °C and is asking for the specific volume and internal energy at those conditions, thus, we can use the steam tables for resolving this requirement.
First of all, we need to remember that water can be a saturated liquid, vapour or liquid-vapour mixture, and this is determined for the temperature and pressure it is at.
In this case, we find that at 165 °C the saturation pressure is about 0.6178 MPa; this means we are referring to a saturated liquid so that both the specific volume and internal energy can be simply read from the steam tables as vf and uf as follows:
[tex]v=0.001127\frac{m^3}{kg}\\\\u=761.67 \frac{kJ}{kg}[/tex]
Learn more:
https://brainly.com/question/13177371https://brainly.com/question/15298076A merry-go-round of radius R, shown in the figure, is rotating at constant angular speed. The friction in its bearings is so small that it can be ignored. A sandbag of mass m is dropped onto the merry-go-round, at a position designated by r. The sandbag does not slip or roll upon contact with the merry-go-round.
The figure shows a top view of a merry-go-round of radius capital R rotating counterclockwise. A sandbag is located on the merry-go-round at a distance lowercase r from the center.
Rank the following different combinations of m and r on the basis of the angular speed of the merry-go-round after the sandbag "sticks" to the merry-go-round.
The angular speed of the merry-go-round reduced more as the sandbag is
placed further from the axis than increasing the mass of the sandbag.
The rank from largest to smallest angular speed is presented as follows;
[m = 10 kg, r = 0.25·R]
[tex]{}[/tex] ⇩
[m = 20 kg, r = 0.25·R]
[tex]{}[/tex] ⇩
[m = 10 kg, r = 0.5·R]
[tex]{}[/tex] ⇩
[m = 10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R]
[tex]{}[/tex] ⇩
[m = 10 kg, r = 1.0·R]
Reasons:
The given combination in the question as obtained from a similar question online are;
1: m = 20 kg, r = 0.25·R
2: m = 10 kg, r = 1.0·R
3: m = 10 kg, r = 0.25·R
4: m = 15 kg, r = 0.75·R
5: m = 10 kg, r = 0.5·R
6: m = 40 kg, r = 0.25·R
According to the principle of conservation of angular momentum, we have;
[tex]I_i \cdot \omega _i = I_f \cdot \omega _f[/tex]
The moment of inertia of the merry-go-round, [tex]I_m[/tex] = 0.5·M·R²
Moment of inertia of the sandbag = m·r²
Therefore;
0.5·M·R²·[tex]\omega _i[/tex] = (0.5·M·R² + m·r²)·[tex]\omega _f[/tex]
Given that 0.5·M·R²·[tex]\omega _i[/tex] is constant, as the value of m·r² increases, the value of [tex]\omega _f[/tex] decreases.
The values of m·r² for each combination are;
Combination 1: m = 20 kg, r = 0.25·R; m·r² = 1.25·R²
Combination 2: m = 10 kg, r = 1.0·R; m·r² = 10·R²
Combination 3: m = 10 kg, r = 0.25·R; m·r² = 0.625·R²
Combination 4: m = 15 kg, r = 0.75·R; m·r² = 8.4375·R²
Combination 5: m = 10 kg, r = 0.5·R; m·r² = 2.5·R²
Combination 6: m = 40 kg, r = 0.25·R; m·r² = 2.5·R²
Therefore, the rank from largest to smallest angular speed is as follows;
Combination 3 > Combination 1 > Combination 5 = Combination 6 >
Combination 2
Which gives;
[m = 10 kg, r = 0.25·R] > [m = 20 kg, r = 0.25·R] > [m = 10 kg, r = 0.5·R] > [m =
10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R] > [m = 10 kg, r = 1.0·R].
Learn more here:
https://brainly.com/question/15188750