Why do not all rock types contain fossils?
Excessive heat and pressure can destroy fossils.
Fossils can only be created in certain places around the world.
Fossils cannot be created near volcanoes.
Fossils are too large to be found in igneous and metamorphic rocks.
Answer:
Igneous rocks form from molten rock, and rarely have fossils in them. Metamorphic rocks have been put under great pressure, heated, squashed or stretched, and fossils do not usually survive these extreme conditions. Generally it is only sedimentary rocks that contain fossils.
Explanation:
Hope it helps, some how.
I need help ASAP pls the last question
Answer:When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed. ... The particles exert more force on the interior volume of the container. This force is called pressure.
Explanation:
What is weather?
a
The atmospheric conditions over many days, weeks, months, and years.
b
The atmospheric conditions for a particular moment in time.
c
The atmospheric conditions forecasted for the next season.
Which name for an ionic compound is
incorrect?
Chromium(IID fluoride (for CrF3 )
Copper(ID) oxide (for Cuo)
Potassium(I bromide (for KBr)
Answer:
no se ingles todavía no aprendo a hablar inglés ya si estuvieran en español los respondia
Argon makes up about 0.93% of our atmosphere. If the atmospheric pressure is 760 mm Hg, what is the pressure contributed by argon?
Answer:
[tex]P_{Ar}=7.068mmHg[/tex]
Explanation:
Hello!
In this case, according to the given percent of argon in our atmosphere, it is possible to compute the pressure contributed by it as shown below:
[tex]P_{Ar}=P_{atm}*0.93\%[/tex]
Thus, we plug in to obtain:
[tex]P_{Ar}=760mmHg*0.0093\\\\P_{Ar}=7.068mmHg[/tex]
Best regards!
The pressure of the argon gas will be equal to [tex]P_{Ar}=7.068 \rm\ mmHg[/tex]
What will be the pressure of the argon gas?Pressure is defined as the normal force acting on any surface in the case of gases it is the normal force acting on the surface of the earth.
now it is given in the question that the Argon contains 0.93% part in the atmosphere.
So here are the calculations
[tex]\rm P_{Ar}=P_{Atm}\times 0.93[/tex]%
[tex]\rm P_{Ar}=700\times 0.93[/tex]%
[tex]\rm P_{Ar}=7.068\ mmHg[/tex]
Thus the pressure of the argon gas will be equal to [tex]P_{Ar}=7.068 \rm\ mmHg[/tex]
To know more about Atmospheric gases follow
https://brainly.com/question/1286223
bromine
+
calcium iodide ® calcium bromide + iodine
Answer:
Br2 + CaI2 = CaBr2 + I2
Explanation:
Disclaimer: Not sure what you're asking, however, I will provide you with the full balanced equation.
Br2 + CaI2 = CaBr2 + I2
Moles of C2H6 in 3.75×10^23 molecules of C2 H6
Answer:
0.623 moles of C2H6
Explanation:
Divide by Avogadro's number (6.022x10^23)
How many atoms of which elements are represented by the following formula?
H3PO4
How many protons does isotope of carbon- 14 atom have
Answer:
Number of protons in Carbon - 14 atom [tex]6[/tex]
Explanation:
The atomic number of carbon 14 atom is [tex]14[/tex]
Number of neutrons in the nucleus of Carbon-14 atom [tex]= 8[/tex]
Atomic number is equal to the sum of neutrons and protons
Number of protons in Carbon - 14 atom [tex]= 14 -8 = 6[/tex]
g 8. A hydrogen atom is initially a rest and in the ground state. A proton with kinetic energy 1000 eV scatters off the atom. In the process the hydrogen atom is ionized. The kinetic energy of the ionized electron is measured to be 15.2 eV and the kinetic energy of the proton produced from the ionization of hydrogen is 4.3 eV. What would be the final kinetic energy of the projectile proton after the collision
Answer:
Explanation:
Ionization energy of hydrogen atom is 13.6 eV . This energy will be provided by energetic proton , the kinetic energy of which is 1000 eV. The kinetic energy of ionized electron is 15.2 eV . Kinetic energy of proton produced from from the ionization of hydrogen or the nucleus of the hydrogen atom is 4.3 eV . All these energy must have come from kinetic energy of initial proton.
So kinetic energy of projectile proton after collision
= 1000 - ( 13.6 + 15.2 + 4.3 ) eV.
= 966.9 eV .
Which pair of elements will form an ionic bond?
Answer: A pair of elements will most likely form an ionic bond if one is a metal and one is a nonmetal. These types of ionic compounds are composed of monatomic cations and anions
Explanation:
1) How many moles of water does 6.02 x 1023 molecules
represent?
Answer:
1.00 mol
Explanation:
Step 1: Given data
Molecules of water: 6.02 × 10²³ molecules
Step 2: Calculate the number of moles corresponding to 6.02 × 10²³ molecules of water
In order to convert molecules to moles, we need a conversion factor. In this case, we will use Avogadro's number: there are 6.02 × 10²³ molecules in 1 mole of molecules.
6.02 × 10²³ molecules × 1 mol/6.02 × 10²³ molecules = 1.00 mol (we keep 3 significant figures)
What will be the volume occupied by 100 grams of oxygen gas
at STP?
Answer:70L
Explanation:
The volume occupied by 100g of oxygen gas at STP is 70L.
1 mole of a gas at STP occupies 22.4 L volume.
The same goes for oxygen gas, [tex]O_2[/tex]. 1 mole of [tex]O_2[/tex] occupies 22.4L volume.
Now the molar mass of [tex]O_2[/tex] is = 32g
So the number of moles of [tex]O_2[/tex] in 100g is
n = 100/32
n = 3.125 moles
Volume occupied by 3.125 moles or 100g of [tex]O_2[/tex] is
V = 3.125 × 22.4 L
V = 70 L volume is occupied by 100g of oxygen gas.
Learn more :
https://brainly.com/question/19958403
What is the theoretical yield of SO3 produced by 4.91 g of S?
Answer:
12.2 g
Explanation:
Step 1: Write the balanced equation for the synthesis of SO₃ from S
S + 1.5 O₂ ⇒ SO₃
Step 2: Calculate the moles corresponding to 4.91 g of S
The molar mass of S is 32.07 g/mol.
4.91 g × 1 mol/32.07 g = 0.153 mol
Step 3: Calculate the theoretical yield, in moles, of SO₃ from 0.153 moles of S
The molar ratio of S to SO₃ is 1:1. The moles of SO₃ produced are 1/1 × 0.153 mol = 0.153 mol.
Step 4: Calculate the mass corresponding to 0.153 moles of SO₃
The molar mass of SO₃ is 80.06 g/mol.
0.153 mol × 80.06 g/mol = 12.2 g
What is the molarity when 1.25 mol is dissolved in 3.50 L of solution?
Answer:
0.36 mol/L
Explanation:
The formula for molarity M=m/L
m stands for moles
L stands for liters
Plug it into the equation...
M=1.25 mol/3.5 L
M=0.35714285714
A balloon with a volume of 0.5L at 293K is cooled to 20K. What is the balloon's new
volume?
Answer:
0.03 L
Explanation:
Step 1: Given data
Initial volume of the balloon (V₁): 0.5 LInitial temperature of the balloon (T₁): 293 KFinal volume of the balloon (V₂): ?Final temperature of the balloon (T₂): 20 KStep 2: Calculate the final volume of the balloon
The balloon is filled with air. If we assume it behaves as an ideal gas, we can calculate the final volume of the balloon using Charles' law.
V₁/T₁ = V₂/T₂
V₂ = V₁ × T₂/T₁
V₂ = 0.5 L × 20 K/293 K = 0.03 L
14) Propane, C3H8, is a hydrocarbon that is commonly used as fuel for cooking.
a) Write a balanced equation for the complete combustion of propane gas, which yields CO2(g) and
H2O(l).
b) If 10.0 g of propane undergo combustion, how many moles of oxygen will be consumed?
c) Assuming that air is 21.0 percent O2 by volume, calculate the volume of air needed to completely
combust 10.0 g of propane at 30oC and 1 atm
d) If the combustion of propane produces 2220 kJ/mole, how much energy is produced when 30.0 g
of propane undergoes complete combustion?
e) If the process described in d) above occurs in a calorimeter containing 8.25 kg of water, calculate
the change in temperature of the water that would be observed.
What causes radiation?
Answer:
It can come from unstable atoms that undergo radioactive decay, or it can be produced by machines. Radiation travels from its source in the form of energy waves or energized particles. There are different forms of radiation and they have different properties and effects
7. Circle the number that is larger in each pair.
5.6 x 10-6 or
5.6 x 10-5
10 because it's a large number
Please help me I need this really quick
Answer:
Produce CO2 = Both
Produces oxygen = Both
Use CO2 in photosynthesis = Both
Use O2 in cellular respiration = Both
Hope this helps! :)
I’m stuck on number 2
What does the image represent?
Answer:
ether
Explanation:
a certain kind of light has a wavelength of 4.6 micrometers what is the frequency of this light and gigahertz? Use c= 2.998 × 10^8 m/s for the speed of light.
Answer:
6.52×10⁴ GHz
Explanation:
From the question given above, the following data were obtained:
Wavelength (λ) = 4.6 μm
Velocity of light (v) = 2.998×10⁸ m/s
Frequency (f) =?
Next we shall convert 4.6 μm to metre (m). This can be obtained as follow:
1 μm = 1×10¯⁶ m
Therefore,
4.6 μm = 4.6 μm × 1×10¯⁶ m / 1 μm
4.6 μm = 4.6×10¯⁶ m
Next, we shall determine frequency of the light. This can be obtained as follow:
Wavelength (λ) = 4.6×10¯⁶ m
Velocity of light (v) = 2.998×10⁸ m/s
Frequency (f) =?
v = λf
2.998×10⁸ = 4.6×10¯⁶ × f
Divide both side by 4.6×10¯⁶
f = 2.998×10⁸ / 4.6×10¯⁶
f = 6.52×10¹³ Hz
Finally, we shall convert 6.52×10¹³ Hz to gigahertz. This can be obtained as follow:
1 Hz = 1×10¯⁹ GHz
Therefore,
6.52×10¹³ Hz = 6.52×10¹³ Hz × 1×10¯⁹ GHz / 1Hz
6.52×10¹³ Hz = 6.52×10⁴ GHz
Thus, the frequency of the light is 6.52×10⁴ GHz
When 20g of hydrogen gas will react with 20g of chlorine gas, what is the mass of hydrogen chloride formed?
Answer:
40g
Explanation:
equation; H2 + Cl2 ---- 2HCl
mole ratio; 1 mole 1 mole 2 moles
before reaction;20g 20g 0g
after reaction; 20g 20g 40g
Newton's Law of Gravity says that any the effect of gravity between two objects depends on what two factors?
Answer:
Explanation:
you sack
which statement describes the energy and bonding changes as two atoms of fluorine become a molecule of fluorine?
Statement that gives description as regards energy and bonding changes between atoms such as fluorine become a molecule of fluorine, bond Energy is released as a bond is formed. Thus option 4 is correct.
What is bond energy ?The Bond Energy otherwise called as bond enthalpy is a quantity that offers insight into the strength of a chemical bond.
The ‘bond energy’ can also be represented as “the average value obtained from the bond dissociation enthalpies of all the chemical bonds in a given chemical compound.
The bond energy of a chemical bond is directly proportional to the stability of that bond which implies that the greater the bond energy o between two atoms, the greater the stability of that chemical bond.
For more details regarding bond energy, visit
https://brainly.com/question/20619573
#SPJ6
Your question was incomplete. The probable question.
Which statement describes the energy and bonding changes as two atoms of fluorine become a molecule of fluorine?
1.Energy is absorbed as a bond is broken.
2.Energy is absorbed as a bond is formed.
3.Energy is released as a bond is broken.
4.Energy is released as a bond is formed.
In an ionic bond, how does a sulfur atom achieve an octet of electrons?
By gaining 2 electrons
By gaining 6 electrons
By losing 2 electrons
By losing 6 electrons
According to the passage, how does conserving energy helps combat climate change?
A
It turns off the lights automatically.
B
It reduces the need for fossil fuels.
C
It recycles old materials into new ones.
D
It releases greenhouse gasses into the air.
Answer:
B it reduces the need for fossil fuels
Explanation:
I got the answer wrong and it showed B was the right one
Which element is malleable and ductile?
A. Phosphorus
B. Argon
C. Sodium
D. Chlorine
Can you help me answer all of these I’ll mark brainliest
Answer:
C.) Sodium
Explanation:
Sodium is an "Alkali Metal"
Where is the main asteroid belt in the solar system?
Answer:
It's between Jupiter and Mars.