Answer:
The position of an equilibrium always shifts in such a direction as to relieve a stress applied to the system -Le Chåtelier's principle
A molecule that donates a proton when it encounters a proton acceptor.- Bronsted-Lowry acid
Occurs when a reaction involving an acid and its conjugate base is combined with a second reaction involving a base and its conjugate acid.- Neutralization
It ionizes completely when dissolved in water.- Strong acid
The shift in the position of equilibrium caused by the addition of a participating ion.- Common ion effect
It only partially ionizes when dissolved in water.- Weak electrolyte
It is capable of acting as either an acid or a base depending upon the solute- Amphoteric solvent
The act of self-ionization of a solvent to produce both a conjugate acid and a conjugate base.- Auto-protolysis
A chemical species that bears both positive and negative charges.- Zwitterion
Explanation:
In the answer box we have various chemical terminologies and their definitions. In answering the question, you must carefully read through each definition, then check what option best matches that definition from the options provided.
Each definition applies only to one terminology as you can see in the answer above.
An enzyme can catalyze a reaction with either of two substrates, S1 or S2. The Km for S1 was found to be 2.0 mM, and the Km, for S2 was found to be 20 mM. A student determined that the Vmax was the same for the two substrates. Unfortunately, he lost the page of his notebook and needed to know the value of Vmax. He carried out two reactions: one with 0.1 mM S1, the other with 0.1 mM S2. Unfortunately, he forgot to label which reaction tube contained which substrate. Determine the value of Vmax from the results he obtained:
Tube number: 1
Rate of formation of product:0.5
Tube number: 2
Rate of formation of product: 4.8
Answer:
100.5 ≈ 101
Explanation:
Km for S1 = 2.0 mM
Km for S2 = 20 mM
Given that : S1 = S2 = hence Vmax for either S1 or S2 can represent
The Vmax can be calculated using the data Given and equation below
Vo = Vmax [s] / ( Km + [s] ) ------ (1)
Vo = 0.5
[s] = 0.1 mM
km = 20 mM
making Vmax subject of equation 1
Vmax = 0.5 ( 20.1 mM) / (0.1 mM )
= 100.5 ≈ 101
3. What noble gas would be part of the electron configuration notation for Mn?
Answer:
Argon {Ar}
Explanation:
The noble gas used for a condensed electron configuration is the one before the element which you are configuring.
In this case, the element (Mn) is manganese
The noble gas that is before this element is Argon which is the row above it
so your configuration would be {Ar} 3d^5 4s^2
Which of the following is not a size-independent property of matter?
O volume
O boiling point
O state of matter
O conductivity
Answer:
the answer is D
Explanation:
hope it helps
please help me i don’t know the answer to this!!!!!!
Answer: Lithium and Ethanol
Explanation: As lithium and ethanol both have a density of under
1.000g/ml, they can be supported by the water. Blood and Magnesium are denser than the water and will therefore sink as the water can not support it them.
Scientific knowledge is open to change as new information is discovered. Which of the following would NOT be a result of new scientific knowledge?
A
Scientists discover that a type of fungus on this log does not require oxygen for absorption and change the classification system.
B
Scientists publish an article that mentions the historic decline in the population of blue stain fungi.
C
Scientists classify a recently discovered bacterium living on this log using generally accepted naming procedures.
D
Scientists discover a bacterium living on this log that is multicellular and revise their classification
it supports respiration.
Answer:
yes yes it does
Explanation:
297.85
Question 2
4 pts
If a sample of gas occupies 23.5 mL at 315 K and 14.8 atm of pressure, what volume will it occupy at 415 K and
12.3 atm?
Give your volume in ml, but do not include the units in the answer. Do not use scientific notation.
Question 3
4 pts
Answer:
37.25
Explanation:
[tex]P_1[/tex] = Initial pressure = [tex]14.8\ \text{atm}[/tex]
[tex]P_2[/tex] = Final pressure = [tex]12.3\ \text{atm}[/tex]
[tex]V_1[/tex] = Initial volume = [tex]23.5\ \text{mL}[/tex]
[tex]V_2[/tex] = Final volume
[tex]T_1[/tex] = Initial temperature = [tex]315\ \text{K}[/tex]
[tex]T_2[/tex] = Final temperature = [tex]415\ \text{K}[/tex]
From ideal gas law we have
[tex]PV=nRT[/tex]
[tex]\Rightarrow PV\propto \dfrac{1}{T}[/tex]
So
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow V_2=\dfrac{P_1V_1T_2}{T_1P_2}\\\Rightarrow V_2=\dfrac{14.8\times 23.5\times 415}{315\times 12.3}\\\Rightarrow V_2=37.25\ \text{mL}[/tex]
The final volume is [tex]37.25\ \text{mL}[/tex]
1.What do you call the rate of doing work?
A. Energy
B. Time
C.Power
D. Work
2.What is the unit of power?
A. Joule
C. Newton
B. Second
D. Watt
3.How much power is required to lift a 30ON chair, as high as 0.20 in 2s?
A.1 W
C. 3 W
B. 7W
D. 15 W
4.How much power is required to raise a 30 kg crate with a vertical distance of 6m in a time of 4
Seconds?
A. 45 WV
C 52.5 W
B. 385 W
D. 441 W
5. A job is done slowly, and an iden tical job is done quickly. Both jobs require the same amount of_______
but different amounts of_________
A. energYy, work
B. work, energy
Choose the correct two words respectively.
C. power, work
D. work, power
6.What is work?
A. Force muitiplied by time
C. Force multiplied by distance
B. Force per unit of time
D. Force divided by distance
7.What is the unit of work?
A Joule
B. Second
C. Newton
D. Watt
8.Power can be increased by______
A. decreasing the force applied by an object.
B. decreasing the work done on the object
C.inereasing the time in which the work is done.
D. decreasing the time in which the work is done.
Please help
Answer:
1. c
2. d
3. c
4. d
5.
6. a
7. a
8.
1. What is the mass of a rock that has a density of 2.5 grams per cubic centimeter and a volume of 4.0
cubic centimeters?
What is the mass
Answer:
Explanation:
d =
m
V
m = d×V
V =
m
d
DENSITY
Density is defined as mass per unit volume.
d =
m
V
Example:
A brick of salt measuring 10.0 cm x 10.0 cm x 2.00 cm has a mass of 433 g. What is its density?
Step 1: Calculate the volume
V = lwh = 10.0 cm × 10.0 cm × 2.00 cm = 200 cm³
Step 2: Calculate the density
d =
m
V
=
433
g
200
c
m
³
= 2.16 g/cm³
MASS
d =
m
V
We can rearrange this to get the expression for the mass.
m = d×V
Example:
If 500 mL of a liquid has a density of 1.11 g/mL, what is its mass?
m = d×V = 500 mL ×
1.11
g
1
m
L
= 555 g
VOLUME
d =
m
V
We can rearrange this to get the expression for the volume.
V =
m
d
Example:
What is the volume of a bar of gold that has a mass of 14.83 kg. The density of gold is 19.32 g/cm³.
Step 1: Convert kilograms to grams.
14.83 kg ×
1000
g
1
k
g
= 14 830 g
Step 2: Calculate the volume.
V =
m
d
= 14 830 g ×
1
c
m
³
19.32
g
= 767.6 cm³
The mass of rock is 10 g.
We have sample of rock.
We have to determine its mass.
How is density and mass of body related ?The density and mass of body are related as follows -
D = M / V
where -
V - volume of the body.
M - mass of the body.
D - density of the body.
According to the question →
Using the formula discussed above -
D = M / V
M = D x V
M = 2.5 x 4 = 10 g
Hence, the mass of rock is 10 g
To solve more questions on Mass - Density Relation, visit the link below-
brainly.com/question/16900865
#SPJ2
1. Which of the following pairs of elements is most likely to share one or more pairs of electrons between
their nuclei?
a. Lithium and iodine
b. Sodium and lead
c. Copper and oxygen
d. Sulfur and chlorine
Answer:
d. Sulfur and chlorine.
Explanation:
A covalent bond is formed by two non-metals with similar electronegativities. As a consequence, they share one or more pairs of electrons between their nuclei.
Which of the following pairs of elements is most likely to share one or more pairs of electrons between their nuclei?
a. Lithium and iodine. NO. Lithium is a metal and iodine a non-metal.
b. Sodium and lead. NO. Both sodium and lead are metals.
c. Copper and oxygen. NO. Copper is a metal and oxygen is a non-metal.
d. Sulfur and chlorine. YES. Both are non-metals.
PLEASE HELP ME ASAP!
Which of the following elements has the highest electronegativity?
A. Ar
B. Ga
C. Ag
D. S
Answer:
its S
Explanation:
How much space does 2 x 1022 atoms of copper take up?
How much space do 2 x 1022 copper pennies take up, using examples from the animation?
Answer:
2044
Explanation:
A chef fills a 60 mL container with 52.2 g of cooking oil. What is the density of the oil?
Answer:
The answer is 0.87 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{52.2}{60} \\ [/tex]
We have the final answer as
0.87 g/mLHope this helps you
What is the unbalanced force on a 1/2 kg object that causes it to accelerate 3 m/s2 to the right
Answer:
The answer is 1.5 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × accelerationFrom the question we have
force = 0.5 × 3
We have the final answer as
1.5 NHope this helps you
Calcium reacts with oxygen to make calcium oxide, CaO. What is the theoretical yield (g) of CaO(s) that could be prepared from 7.75 g of Ca(s) and 2.44 g of O2(g)
Answer:
Explanation:
2Ca + O₂ = 2CaO
80 g 32 g 112 g
given amount of Ca = 7.75 g
it will require oxygen = 32 x 7.75 / 80 = 3.1 g
but available oxygen = 2.44 so oxygen is the limiting reagent .
32g oxygen reacts with calcium to give 112 g of calcium oxide
2.44 gram of oxygen reacts with calcium to give 112 x 2.44 / 32 of CaO .
= 8.54 gram .
Theoretical yield of CaO = 8.54 gram.
Statement 1: The reaction follows the mass energy equation E= mc". Statement 2: A large amount of energy is produced during the reaction.
Which statement(s) are true for both fusion and fission reactions? (1 point)
a. Only 1
b. Only 2
c. Both 1 and 2
d. Neither 1 nor 2
Answer:
Neither
Explanation:
The statements are true for both fusion and fission reactions are the fission is the breaking of a heavy, unstable nucleus into two lighter nuclei, and fusion is the process where two light nuclei join together releasing large amounts of energy. Therefore, option D is correct.
What do you mean by fission ?The term fission is defined as when a neutron slam into a larger atom, forcing it to excite and split into two smaller atoms.
Additional neutrons are released, which can set off a chain reaction. A tremendous amount of energy is released when each atom splits.
When a neutron strikes an atom of uranium-235, it splits into two lighter nuclei, krypton and barium.
Both fission and fusion reactions involve the conversion of some mass into energy in order to form a new nucleus or nuclei, which requires some nuclear binding energy.
Thus, option D is correct.
To learn more about fission, follow the link;
https://brainly.com/question/2732120
#SPJ2
How many grams of Al are needed to react with 91.8 grams of FeO
3FeO + 2Al —> 3 Fe +Al2O3
Answer:
Ans : 22.86 gm of Aluminium
Solution,
3FeO + 2Al ---> 3 Fe + [tex]Al_{2}O_{3}[/tex]
Given 3 2
Find 1.27 x
By the given gms of FeO find its mole and put the moles in the find,
[tex]n = \frac{given mass}{molecular mass}[/tex]
Given mass of FeO is 91.8
Molecular mass of FeO is 71.8
n = [tex]\frac{91.8}{71.8}[/tex]
n = 1.27 moles of FeO
Now solve for x,
[tex]x = \frac{2 x 1.27}{71.8}[/tex]
x = 0.85 moles
These are just moles of Aluminium that we need to react with FeO, so to find Grams of Aluminium we need,
Mass = moles x molecular mass
Mass = 0.85 x 27(atomic mass of Al)
Mass = 22.86 grams of aluminium is what we need
what is the relationship between netforce and acceleration based on the situation?
Answer:
The net force is greater at the second situation as well as the acceleration due to the contribution of the second guy.
Explanation:
Hello.
In this case, since the net force is computed via adding all the exerted forces on a body, for the first situation we can see that the net force equals the force provided by that guy when pulling, whereas in the second situation the net force equals the force of both of the guys pulling the car:
[tex]F_N_1=F_1\\\\F_N_2=F_1+F_2[/tex]
For the acceleration, we can see that applying an extra force (due to the second guy) turns out into a greater acceleration, that is why the car at the second situation reaches the tree whereas the other one does not.
Best regards.
6-36. Calculate [H ] and pH for the following solutions: (a) 0.010 M HNO 3 (b) 0.035 M KOH (e) (c) 0.030 MHCl
Answer:
a)2
b)12.5
c)1.5
Explanation:
a)
pH = -log [H^+]
pH = -log [0.01]
pH = 2
b)
pOH = -log[OH^-]
pOH = -log [0.035]
pOH= 1.5
But
pH + pOH = 14
pH = 14 - pOH
pH= 14 - 1.5
pH = 12.5
c)
pH = -log[H^+]
pH= -log[0.030]
pH = 1.5
1. A camper named Bob ran into aliens on a trail. Bob made friends with the aliens so he could
steal their treasure of 1 zygot.
1 zygot = 3 trigots
3 trigots = 2 bigots
4 bigots = 1 gram gold
How many grams of gold did Bob take from the aliens?
Answer : The number of grams of gold Bob take from the aliens will be 0.5.
Explanation :
As we are given that:
1 zygot = 3 trigots
3 trigots = 2 bigots
4 bigots = 1 gram gold
Now we have to determine the number of grams of gold Bob take from the aliens.
The number of grams of gold Bob take from the aliens will be equal to:
[tex]\frac{1\text{ zygot}}{1}\times \frac{3\text{ trigots }}{1\text{ zygot}}\times \frac{2\text{ bigots }}{3\text{ trigots }}\times \frac{2\text{ gram gold}}{4\text{ bigots }}[/tex]
= [tex]\frac{6}{12}[/tex] gram gold
= [tex]\frac{1}{2}[/tex] gram gold
= 0.5 gram gold
Hence, the number of grams of gold Bob take from the aliens will be 0.5.
which statement differentiates between prokaryotic cells and eukaryotic cells?
A.Eukaryotic cells have DNA: prokaryotic cells do not.
B. Prokaryotic cells have DNA: eukaryotic cells do not.
C. Eukaryotic cells have nuclei: prokaryotic cells do not.
D. Prokaryotic cells have nuclei: eukaryotic cells do not.
Answer:
It is C
Explanation:
It is because Prokaryotic cells mostly don't have a nucleus.
Answer:
It is C.Eukaryotic cells have nuclei; prokaryotic cells do not
Explanation:
I just watched a video of it.
what always forms between two large air masses of different moisture and air temperature?
Answer:
"What always forms between two large air masses of different moisture and air temperature?"
Explanation:
When a cold air mass replaces a warm air mass the boundary between the two air masses is called a cold front. ... Fronts form at the boundary between air masses of different temperatures and moisture. Warm air always slopes upward over colder air.
The boundary between two air masses of different density such when it can not move called “stationary” “warm” when warmer air replaces cooler air.
What is density ?The density can be defined as the mass per unit volume which means that it is the ratio between mass and volume, that means the object has the stuff in a unit volume.
Density is determined by the matter where it shows how the matter is tightly crammed together and it was put forwarded by the Greek scientist Archimedes
To calculate the density of an object, the mass (m) can be divided by the volume (v)
Density = Mass/Volume
The different units include SI unit of density which is kilogram per cubic meter (kg/m3) or in cgs unit of grams per cubic centimeter (g/cm3).
Learn more about density, here:
brainly.com/question/15164682
#SPJ6
If a feather and in Marble are dropped at the same time from the same height explain. Which object would hit the floor first based on air resistance?
Answer:
the marble would hit the floor first because the feather would be effected by air resistance
A dog has a mass of 19 kg. What is the mass of the dog in grams,expressed in scientific notation
Answer: 1.9 x 10^4
Explanation:
A dog has a mass of 19 kg. The mass of the dog in grams, expressed in scientific notation, is 1.95 × 10⁴ g.
What is mass?Mass is the quantity of matter in a physical body. The product of the compound's molar mass and the substance's moles are defined as mass.
Measuring units to determine the size, weight, or quantity of any object. Seven fundamental measurement units are utilized in daily life and across the globe.
These units of measurement are the meter, which is used to measure distance, and the second, which is used to measure. Grams and kilograms are the measuring units that are used to measure the quantity of a solid item.
The mass of the dog in grams is:
1 kilogram = 1000 grams
19.5 kg × (10³ g/1 kg) = 1.95 × 10⁴ g.
Thus, the mass of the dog in grams is 1.95 × 10⁴ g.
To learn more about mass, refer to the link:
https://brainly.com/question/493592
#SPJ2
Which of the following substances will dissolve in water? Check all that apply.
Magnesium Sulfate
Methane
Butane
Sodium nitrate
Answer:
The answers are A. and D.
According to the concept of solubility and properties of ionic compounds, magnesium sulfate and sodium nitrate dissolve in water.
What is solubility?Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/3479494
#SPJ2
Velocity is
is a given
O distance, time
O speed, displacement
O speed, direction
Identify 3 pieces of safety equipment commonly found in the science lab.
Answer: googles, fire extinguisher, fire blanket
Explanation:
How many protons does Hydrogen contain?
Answer:
1
Explanation:
How is light emitted
Answer:
The frequencies of light that an atom can emit are dependent on states the electrons can be in. When excited, an electron moves to a higher energy level or orbital. When the electron falls back to its ground level the light is emitted.
Answer:
A Light is produced when an electron moves from a higher to a lower energy level.
Explanation:
Which statement best Describe the people in Mississippi period
Answer:Explanation:
The statement that best describes the people of the Mississippian Period is that they were farmers who used simple tools to grow their food in small gardens. They would also fish and gather food such as muscles, in order to create a large enough food supply in addition to produce from these gardens and farms.