If one DNA strand reads CCGTAATGCAT, what will be the sequence of the complimentary strand?

The question is incomplete, The complete question is;

Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. What experimental evidence led to the development of this atomic model from the one before it?

Answer:

A few of the positive particles aimed at a gold foil seemed to bounce back.

Explanation:

This model of the atom was proposed by Ernest Rutherford and was called the planetary model of the atom.

This model is based on an experiment using a gold foil on which alpha particles were focused. Most of the alpha particles passed through the foil. Some of the alpha particles were scattered at large angles and a few seemed to bounce back.

This led to the conclusion that the atom has a massive positive core around which electrons move as planets move around the sun.

Answer:

It is A

Explanation:

Answer: Nuclear change is distinct from chemical change in that elements change. In the nuclear change the elements can change from one to another. (Nuclei can break apart to form smaller elements.)

Explanation:

Answer:

A nuclear change is a process by which nuclei of certain isotopes change spontaneously or are forced to change to two or more different isotopes.

Explanation:

The three main types of nuclear change in the matter are radioactive natural disintegration, nuclear fission, and nuclear fusion.

I like blowing up stuff too

Answer:

Reproduction

Explanation:

Reproduction is the biological process by which new “offspring” (like organisms) are produced from their “parents" (the original organism)

Answer:

5.3g of MgO would be produced

Explanation:

Based on the chemical reaction:

2Mg(s) + O₂(g) → 2MgO(s)

1 mole of Mg reacts per mole of oxygen.

To solve this question we need to convert the mass of each reactant to moles in order to find limiting reactant using the chemical equation:

Moles Mg -Molar mass: 24.305g/mol-:

3.8g Mg * (1mol / 24.305g) = 0.1563moles Mg

Moles O₂ -Molar mass: 32g/mol-:

2.1g O₂ * (1mol / 32g) = 0.0656 moles O₂

For a complete reaction of 0.0656 moles of O₂ are required:

0.0656 moles O₂ * (2 mol Mg / 1mol O₂) = 0.132 moles Mg

As there are 0.1563 moles of Mg, Mg is the excess reactant and O₂ the limiting reactant.

0.0656 moles O₂ produce:

0.0656 moles O₂ * (2 mol MgO / 1mol O₂) = 0.132 moles MgO

The mass is -Molar mass MgO: 40.3g/mol-:

0.132 moles MgO * (40.3g / mol) =

5.3g of MgO would be produced

Answer:

its the first part in mass of sodium

Explanation:

:)

Answer:

yes ?

Explanation:

from what I have learned so far, the hair gradually gets thinner and thinner with less oxygen which would change the pressure

The question is incomplete, the complete question is;

Choose the aqueous solution that has the highest boiling point. These are all solutions of nonvolatile solutes and you should assume ideal van't Hoff factors where applicable. 0.100 m C6H12O6 0.100 m AlCl3 0.100 m NaCl 0.100 m MgCl2 They all have the same boiling point.

Answer:

AlCl3 0.100 m

Explanation:

Let us remember that the boiling point elevation is given by;

ΔTb = Kb m i

Where;

ΔTb = boiling point elevation

Kb = boiling point constant

m = molality of the solution

i = Van't Hoff factor

We can see from the question that all the solutions possess the same molality, ΔTb now depends on the value of the Van't Hoff factor which in turn depends on the number of particles in solution.

AlCl3 yields four particles in solution, hence ΔTb is highest for AlCl3 . The solution having the highest value of ΔTb also has the highest boiling point.

Answer:

mass

Explanation:

Answer:

The answer is C.

Explanation:

If you have absolutely identical objects that have the same weight exactly when they are at the same temperature, then when one object is heated, it will weigh more.

Hope this helps :)

-ilovejiminssi♡

Answer:

84 g of N₂        

Explanation:

We begin from the reaction:

N₂O₄  +  2N₂H₄ →  3N₂  + 4H₂O

  1st step: Find out the limiting reactant.

We convert the mass to moles.

       276 g . 1mol/ 92g = 3 moles of N₂O₄

64 g . 1mol / 32g = 2 moles of hidrazine  

Limiting reactant is the hydrazine. Ratio is 1:2, then for 3 moles of tetroixde I may need 6 moles of N₂H₄. (But I only have 2).

To determine the grams of produced nitrogen we see stoichiometry (2:3)    

2 moles of hydrazine can produce 3 moles of N₂

Definetaly our 2 moles make 3 moles of gas.

We convert the moles to mass.

3 mol . 28g /1mol = 84 g of N₂                                                                                                

Answer:

I think is the last one!!!! punnet square ⬜

Answer:

Kc = 0.333

Explanation:

First of all we state the equilibrium reaction:

C₂H₅OH(aq) + CH₃CO₂H(aq)  ⇄  CH₃CO₂C₂H₅(aq) + H₂O(l)

Initially we start with 1 mol of alcohol and 1 mol of acid. After the reaction goes complete, 0.25 moles of acid have been consumed. As ratio is 1:1, we also consumed 0.25 moles of alcohol. Then, in the product side we finally produced 0.25 moles of water and 0.25 moles of ethyl acetate.

How many moles are available in the reactant side, after the equilibrium?

1 mol - 0.25 moles (that have been reacted) = 0.75 moles.

To determine Kc, we need molar concentrations, so let's see M in products and reactants:

0.75 mol / 0.25 L = 3 M

0.25 mol / 0.25 L = 1 M

We needed to convert 0.250 mL to L → 0.250 mL . 1L/ 1000mL = 0.250 L

Let's determine expression for Kc:

Kc = [H₂O] . [CH₃CO₂C₂H₅]  / [C₂H₅OH] . [CH₃CO₂H]

1 . 1 / 3 . 3 = 1/9 → 0.333

Answer:

1,43 M

Explanation:

molair mass NaCl = 58,44 g/mol

You need to calculate how many moles 25 g is:

25 g / 58,44 g/mol = 0,4278 mol

0,4278 mol / 0,3 L = 1,43 M

Answer:

This means that the pressure would become double of it's initial pressure.

Explanation:

Key statements:

- Constant temperature

- What happens to the pressure of the gas if the volume was

smooshed down to half its original size?

Basically the question is asking about the relationship between pressure and volume at constant temperature. This is given by Boyle's law.

Boyle's law states that the volume of a fixed mass of gas is inversely proportional to it's volume at a fixed temperature.

This is given by;

P1V1 = P2V2

Where;

P1 = Initial pressure

P2 = Final pressure

V1 = Initial Volume

V2 = Final Volume

From the question;

V2 = V1/2

Inserting it into the equation;

P1 V1 = P2 V1/2

Divide all through by  V1

P1  = P2 /2

P2 = 2 P1

This means that the pressure would become double of it's initial pressure.

Answer:

The name of that molecule should be 1-pentyne

so your answr should be B

Explanation:

Molecules are species made up of atoms. The given molecule in the figure is 1-pentyne. Thus, option B is correct.

1-Pentyne is a chemical compound with the formula C₅H₈, and an internal alkyne group between the first and the second carbon atom.

The molecules consist of twelve bonds including the bonds between the carbon-carbon, and carbon-hydrogen. There is one triple or the alkyne bond present and five carbon hence the name of the molecule is 1-Pentyne.

Therefore, the molecule is option b. 1-Pentyne.

Learn more about 1-Pentyne here:

https://brainly.com/question/15397834

#SPJ2

Answer:

D

Explanation:

why i say that is because take for example a volcano, when you make a model, you'll see what takes place in a real eruption but in real life the lava would burn things in its path, the model volcano may not. That's just an example

Answer:

D

Explanation:

I got it right on study island

Answer:

The designs ensure that the experimental.

Explanation:

Scientific research refers to the-fact finding inquiry to answer the questions related to natural processes. A hypothesis is a situation or an assumption that needs to be proved by applying scientific produces. Experimental design refers to the methodology, which is applied to conduct research.

The designs ensure that the experimental data support the hypothesis is the true statement regarding experimental designs that are used in scientific research because an experimental design should be concerned with the fact that it is relevant or appropriate to prove a hypothesis.

Answer:

its c. the designs follow a general method that is familiar to all scientists

Explanation:

Answer:

I'm sorry but there is no diagram above.

Answer:

the breaking down of rock is known as weathering

Answer:

3SiO2  +  2CaC2 ------>   3Si  +   2CaO  +  2CO2

Explanation:

Answer:less than

Explanation:

If we had 79.3 grams of Xe, we would expect a volume that is less than obtained with neon. So, the correct option is (C).

Density is defined as the mass per unit volume of a substance. The most commonly used symbol for density is ρ, although the Latin letter d can also be used. Density is defined as mass divided by volume:

[tex]{\displaystyle \rho ={\frac {m}{V}}}[/tex]

where ρ is density,

m is mass, and

V is volume.

The mass contained per unit volume of an object is known as density. where the SI unit of density is kilogram per cubic meter [tex](kg/m^3).[/tex] Density is inversely proportional to volume, so the density of Xenon is [tex]5.894 kg/m^3[/tex] while the density of neon is 0.89994 kg/m³. So, if density is more than volume will be less and vice versa. In this case, density of Xenon is more as compare to neon so, the volume of neon will be more.

Thus, if we had 79.3 grams of Xe, we would expect a volume that is less than obtained with neon. So, the correct option is (C).

Learn more about Density, here:

https://brainly.com/question/29775886

#SPJ5

Answer:

The enthalpy of solution for AgNO3 is positive because the temperature of the solution decreases (the dissolution is endothermic). Hsol = Hsolute + Hsolvent + HmixHsolute and Hsolvent are endothermic because energy is required to overcome intermolecular forces and separate solute and solvent particles.

Answer:

the enthalpy of solution for agno3 is positive because the temperature of the solution decreases. (the dissolution is endothermic.)

Delta H sol=delta HSolute +delta H solvent +delta H mix

HSolute and H solvent are endothermic because energy is required to overcome intermolecular forces and separate solute and solvent particles.

H mix is exothermic because energy is released when intermolecular forces form between solute and solvent particles.

if the overall enthalpy of solution is positive, then HSolute + H solvent must be larger in magnitude than H mix.

Explanation:

correct on edge2021

Answer:

The correct answer is - reactants.

Explanation:

In any chemical reaction, there is an arrow that distinguishes the two major components of the chemical equation by placed in between them. These two components are reactants and products.

OftenlThe reactants placed on the left side of a chemical equation and the products placed on the right side of a chemical equation. In this given case, the reactants 2H2 + 1O2 are placed on the left side of the equation.

Answer:

1.In electronics

2 In medicine

3.In the construction

4.In jewelry

5.In machinery and automobiles

6.In agriculture

7.In the kitchen

8.Furniture

9. Security system

10 Bullion market

According to the enthalpy diagram true statement is that Arrow C indicates that third intermediate reaction is exothermic in nature.

Enthalpy of the reaction gives idea about the exchange of heat during the whole chemical reaction process.

Hence Arrow C indicates that the third intermediate reaction is exothermic is true statement.

To know more about enthalpy, visit the below link:
https://brainly.com/question/14291557

#SPJ2

Answer: c

Explanation:

Answer:

0.664 g are formed by the reaction.

Explanation:

First of all, we determine the reaction:

Mg + CO₂  →  MgO  + CO

We need to determine the moles of the CO₂ by the Ideal Gases Law.

We convert to L, the volume → 400 mL = 0.4L

T° → 23°C + 273 = 296K

P . V = n . R .T

n = P . V / R .T

n = (1 atm . 0.4L) / (0.082 . 296K) → 0.0165 moles

Moles of Mg → 2.5 g . 1mol / 24.3g = 0.103 moles

As ratio is 1:1, CO₂ is the limiting reactant.

For 1 mol of Mg, we need 1 mol of gas

Then, for 0.103 moles of Mg, we need 0.103 moles of gas, but we only have 0.0165 moles.

If we see the product side, ratio is also 1:1

0.0165 moles of CO₂ must produce 0.0165 moles of MgO.

We convert the moles to mass → 0.0165 mol . 40.3 g /1mol = 0.664 g

Answer:

Explanation:

Here's the complete question:

A chemist analyzes two samples.One sample contains 14g of element x and 6.0g of element y.The second sample contains 28g of element x and 6.0g of element y. Does it appear that the two samples are the same substance?

The two samples that we are given in the question are different. They are not the same thing because we can deduce that their components ratio are different.

Sample One contains 14g of element x and 6.0g of element y. The ratio of element x to y is 14/6 = 7/3 = 7:3.

Sample Two contains 28g of element x and 6.0g of element y. The ratio of element x to y is 28/6 = 14/3 = 14:3.

Therefore, they have different ratio for their components and are therefore not thesame.

Answer:

The usual cause of sea breeze is the difference in specific heat capacity between land and water Land heats and cools more quickly than water. What is the cause of a sea breeze? The air over the land is warmed and rises, to a greater temperature than that over the sea.

Explanation:

Your answer is C ! <3

The difference in specific heat capacity between land and water is the cause of sea breeze.

land and ocean heat up at different rates, sea breezes often occur during hot, summer days. The land surface warms up more quickly than the water surface during the day. As a result, the air above land is warmer than that over water.

Just to refresh your memory, warmer air is lighter than cooler air. Warm air rises as a result. As a result, the warmer air above the ground is rising. The cooler air above the water is moving across the surface of the land to replace the rising heated air as it rises over the land.

This is the sea breeze, which is seen at the top of the next picture. The land breeze that happens is seen at the bottom of the following picture.

Therefore, The difference in specific heat capacity between land and water is the cause of sea breeze.

To learn more about sea breeze, refer to the link:

https://brainly.com/question/13015619

#SPJ2

Answer:

Fractional distillation

Explanation:

The process of separating petroleum products into its fractions is called fractional distillation.

Fractional distillation is a method of separating a mixture of substances based on the differences in their boiling points.

Petroleum is a mixture of hydrocarbons separated in a large fractionation tower having many trays maintained at different temperatures.

As the vapor containing the petroleum mixture ascends the fractionation tower, the mixture is separated at each tray to yield the various fractions of petroleum.