Peptide bonds are used to join amino acids in a certain order determined by the nucleotide sequence in the DNA or RNA template to create polypeptide chains.
The distinctive characteristics of the resultant protein are determined by the amino acid sequence. Lanine, arginine, asparagine, aspartic acid, cysteine, glutamine, glutamic acid, glycine, histidine, isoleucine, leucine, lysine, methionine, phenylalanine, proline, serine, threonine, tryptophan, tyrosine, and valine are the twenty different amino acids that can be used to create a polypeptide chain.
Polypeptide chain
A linear chain of amino acids joined by peptide bonds is referred to as a polypeptide chain. Each amino acid has a distinct side chain, an amino group, and a carboxyl group.
Amino acids are chemical molecules. The genetic code, which regulates the arrangement of nucleotides in a gene, determines the sequence of amino acids in a polypeptide chain.
Protein synthesis takes place in the ribosomes of cells and results in the formation of polypeptide chains. The messenger RNA (mRNA) nucleotide sequence is read by the ribosome, which then uses this data to construct a chain of amino acids in the proper sequence.
learn more about amino acids here
https://brainly.com/question/14351754
#SPJ1
Grasshoppers can be
extreme pests for farmers as
they can damage crops. For
each of the following
organisms in the table,
describe how each organism
population might be
affected by a significant
grasshopper population
increase such as a visiting
locust swarm.
Frogs:
Grasshoppers:
Snakes:
Producers:
A significant grasshopper population increase could benefit frogs as they are a common predator of grasshoppers.
Frog:With more grasshoppers available, frog populations could increase as they have a readily available food source. However, if grasshopper populations become too large and start to damage vegetation, the resulting loss of habitat and food could negatively impact frog populations in the long term.
Grasshoppers: A significant grasshopper population increase, such as during a locust swarm, would likely result in a population boom for grasshoppers themselves. With more resources available, grasshoppers could reproduce and grow their population size rapidly. However, once the swarm has exhausted available resources, the population may crash, and many individuals may die off.
Snakes: A significant increase in the grasshopper population could benefit snakes that prey on them. Snakes would have more prey available to them, which could lead to population growth. However, if grasshopper populations become too large and start to damage vegetation, the resulting loss of habitat and food could negatively impact snake populations in the long term.
Producers: A significant grasshopper population increase could have a negative impact on producers such as plants and crops. Grasshoppers are herbivores that can cause extensive damage to vegetation, especially during a locust swarm. This could result in crop failures and reduced plant growth, which could have negative consequences for the entire ecosystem, including other animals that rely on producers as a food source.
For such more question on grasshopper
https://brainly.com/question/9425671
#SPJ4
1. Determine the direction in which the blood was traveling
The direction of blood travel can be determined by the “tail”, or “cast-off wave” of the blood stain on a surface. Examining the direction of bloodstain is called Blood Pattern Analysis (BPA).
The angle of blood stain can be demarcated by a Swipe pattern, Splatter pattern, or Wipe pattern on transferring to an examination slide with a chemiluminescent dye. The said patterns point out the blood direction and the assault committed in the following steps:
• A characteristic tail pattern is formed on the application of chemical dye on the blood stain which points to the direction of the blood drops.
• The steeper the angle of the tail, the greater the force applied on the victim measured by sine values.
• The splatters indicate enormous force applied on the victim, that impacts through the air before landing on a surface.
• Transfer patterns are medium-force assaults when blood soaks on direct contact between surfaces.
• The Wipe patterns are low-velocity assaults and show large blood drops than the other two mentioned above.
To know more about blood direction on the stain:
brainly.com/question/30753392
brainly.com/question/30654819
The complete question is:
How to determine in which direction the blood was traveling with the help of a blood stain?
8. the biliary system (liver and gallbladder) and pancreas play a very important role in digestion. bile, produced in the liver and stored in the gall bladder is important for: a. neutralizing acid chyme (gastric secretion mixed with food) b. secreting enzymes to breakdown macromolecules (proteins, fats, and carbohydrates) c. fat emulsification d. both a and b are correct
C. Fat emulsification. Emulsification is the act of dissolving fat into smaller blood cells, which makes it simpler for enzymes to work and aids in food digestion.
The process of fat emulsification aids in the breakdown of lipids into glycerol and fatty acids, which the small intestine can easily absorb.
Emulsification in digestion is the breaking down of fat globules into minute droplets in the duodenum, creating a larger area where the pancreatic lipase enzyme can operate to digest the fat into fatty acids and glycerol. The activity of the bile salts aids in emulsifying the fats.
The liver cells release bile for two main purposes:
To transport trashto digest fats by breaking them downThe real element that aids in the breakdown and absorption of fats is bile salt.Learn more about Emulsification here:
https://brainly.com/question/14305593
#SPJ1
in massively parallel sequencing techniques, the dna to be sequenced is sheared into small pieces and small oligonucleotides called adapters are attached to the ends of the dna fragments. these adapters function to blank and blank . multiple select question. anneal to a pcr primer attach the dna fragment to taq polymerase attach the dna fragment to a solid substrate produce the dntps required in the reaction
In massively parallel sequencing techniques, the DNA to be sequenced is sheared into small pieces and small oligonucleotides called adapters are attached to the ends of the DNA fragments. These adapters serve two primary functions: to anneal to a PCR primer and to attach the DNA fragment to a solid substrate.
The adapters anneal to the PCR primers, which allows for the replication of the DNA fragment during the polymerase chain reaction (PCR). This PCR amplification step helps increase the number of copies of the DNA fragment so that it can be more easily sequenced.
The adapters also attach the DNA fragments to a solid substrate. This substrate could be a glass plate, an array, or beads, which allow for the physical separation of the DNA fragments during the sequencing process.
Therefore, the correct options for the blanks are Anneal to a PCR primer and Attach the DNA fragment to a solid substrate.
To know more about PCR primers, refer here:
https://brainly.com/question/14579965#
#SPJ11
How are chromosomes distributed in sex cells?
can someone answer and explain why?
Answer:
The answer is A. Container 1.
Explanation:
Based on the data provided, Container 1 is most likely the one in which photosynthesis was not occurring. This is because the amount of CO2 remaining in Container 1 after 2 days was 100 cubic centimeters, which is the highest amount of CO2 remaining among all four containers. This suggests that the plants in Container 1 did not use as much CO2 for photosynthesis as the plants in the other containers, indicating that photosynthesis was likely not occurring at the same rate as in the other containers. The other containers all had less CO2 remaining, suggesting that photosynthesis was occurring more efficiently in those containers.
Why is it A? Container 1 is where the plant probably didn't do photosynthesis because it had the most CO2 left after 2 days, while the other containers had less CO2 left. This means that the plant in Container 1 did not use as much CO2 for photosynthesis as the plants in the other containers, suggesting that photosynthesis was not occurring at the same rate as in the other containers.
Hope this helps!! :]
analyze the link between self-development, confidence and ideal self.
in which situation is the principle of cross cutting relationships useful in determining relative age?
From oldest to youngest, the rock layers are A, B, and C, with the fault and igneous intrusion cutting through them afterwards.
How is relative dating utilizing cross-cutting relationships?The Principle of Cross-cutting Relationships, which holds that rock formations that cut across other rocks must be younger than the rocks they cut over, is another essential component of relative dating. This idea makes sense when considering the formation of rocks.
What is the cross-cutting relationship's guiding principle?The geologic structure that crosses another structure is considered to be younger than the structure it crosses, according to the cross-cutting relationships principle.
To know more about cutting visit:-
https://brainly.com/question/264225
#SPJ1
Membrane transport does not act totally independent of other modes of transport across the cell. This is evidenced by A. simple diffusion. C. osmosis. B. facilitated diffusion. D. cotransport.
Passive transport doesn't require any energy input. Passive transport is exemplified by diffusion, which is the passage of molecules from the a location of high proportion to a location with low concentration.
Correct option is, A.
What modes of transportation do not require an membrane or protein and are not dependent on a living system?A simple diffusion in biology is a type of diffusion that doesn't need the aid of membrane proteins. The substance or particle essentially shifts from a greater to a lower concentration. Yet, it does not require a membrane protein to assist in the flow of molecules downward.
What part of a cell's mobility is the cell membrane responsible for?Every cell has a membrane that acts as a partition between its inside and the outside environment. This membrane is frequently referred as the plasma membrane. An lipid bilayer that really is semipermeable makes up the cell membrane. The passage of chemicals within and outside a cell is controlled by the cell membrane.
To know more about molecules visit:
https://brainly.com/question/28931982
#SPJ1
Please please help helppp
a. Silkworms:
The possible genotype ratio for the offspring of parents CC * cc is 100% Cc, where all offspring will be heterozygous for the yellow cocoon trait. The phenotype ratio will be 100% yellow cocoon, as the dominant C allele will be expressed.
What is codominant?Codominance is a form of inheritance in which both alleles of a gene are expressed equally in the phenotype of a heterozygous individual. In codominance, neither allele is dominant over the other, and both are fully expressed in the phenotype of an individual.
For example, in the ABO blood group system, there are three alleles: A, B, and O. Alleles A and B are codominant, meaning that if an individual has both alleles, they will express both A and B antigens on their red blood cells. If an individual has only one A or B allele, they will express the corresponding antigen on their red blood cells. The O allele is recessive, meaning that it will only be expressed if an individual has two copies of the O allele.
b. Guinea pigs:
The possible genotype ratio for the offspring of parents Ff * ff is 50% Ff and 50% ff. The phenotype ratio will be 50% short fur and 50% white fur, as the dominant F allele will be expressed in Ff individuals and the recessive f allele will be expressed in ff individuals.
c. Mice:
The possible genotype ratio for the offspring of parents Ee * Ee is 25% EE, 50% Ee, and 25% ee. The phenotype ratio will be 75% black eyes and 25% red eyes, as the dominant E allele will be expressed in individuals with EE or Ee genotypes, while the recessive e allele will be expressed in individuals with ee genotype.
d. Four-o-clock plants:
The possible genotype ratio for the offspring of parents ff * Ff is 50% Ff and 50% ff. The phenotype ratio will be 100% pink flowers, as both the dominant F allele and the recessive f allele will be expressed in individuals with Ff genotype, resulting in a codominant pink flower phenotype.
To know more about antigens, visit:
https://brainly.com/question/24384193
#SPJ1
Silkworms , All of the offspring of parents CC × cc will be heterozygous for the yellow cocoon trait, with a possible genotype ratio of 100 percent Cc.
Because the dominant C allele will be expressed, the phenotype ratio will be 100 percent yellow cocoon.
What defines codominant?Codominance is a type of inheritance in which a heterozygous person's phenotype is the same for both alleles of a gene. In codominance, neither allele is more dominant than the other, and an individual's phenotype fully reflects both.
There are, for example, three alleles in the ABO blood group system: A, B, and O. Alleles A and B are codominant, which means that if a person has both, their red blood cells will express both A and B antigens. Red blood cells will express the corresponding antigen if a person only has one A or B allele. The O allele is recessive, which means that a person can only have two copies of the O allele.
b. Guano Pigs:For the offspring of parents Ff × ff, the possible genotype ratio is 50% Ff and 50% ff. As the dominant F allele will be present in Ff individuals and the recessive F allele will be present in ff individuals, the phenotype ratio will be 50/50 short fur to white fur.
c. Mice:25% EE, 50% Ee, and 25% ee are the possible genotype ratios for the children of Ee × Ee. As the dominant E allele will be expressed in individuals with EE or Ee genotypes and the recessive E allele will be expressed in individuals with ee genotype, the phenotype ratio will be 75% black eyes and 25% red eyes.
d. Plants at four o'clock:The potential genotype ratio for the offspring of parents ff × ff is fifty percent Ff and fifty percent ff. Because individuals with the Ff genotype will express both the dominant F allele and the recessive F allele, resulting in a codominant pink flower phenotype, the phenotype ratio will be 100% pink flowers.
Learn more about antigens :
brainly.com/question/24384193
#SPJ1
which of the following is true of the countercurrent exchange system? group of answer choices all of these answers are true of the countercurrent system it is more efficient than the parallel current system it involves the transfer of oxygen it depends on elements moving in opposing directions of one another it serves to maximize a diffusion gradient between water and oxygen
The transfer of oxygen, with elements moving in opposing directions of one another in order to maximize a diffusion gradient between water and oxygen. It is more efficient than the parallel current system, as all of these answers are true of the counter current system.
The following are true of the counter current exchange system. it is more efficient than the parallel current system, it depends on elements moving in opposing directions of one another, and it serves to maximize a diffusion gradient between water and oxygen.
The counter current exchange system is a biological mechanism that exists in animals, plants, and fungi. In aquatic animals, it helps to maximize the transfer of oxygen from water to the bloodstream. This is due to the mechanism's ability to generate a diffusion gradient that is both strong and continuous. The system also reduces the loss of body heat by creating a similar gradient for temperature. For instance, oxygen and water move in opposing directions. Additionally, the system is more efficient than the parallel current system. This is because the counter current exchange system allows for the continuous transfer of oxygen into the bloodstream.
Finally, it serves to maximize a diffusion gradient between water and oxygen. This gradient enables efficient oxygen transfer from water into the bloodstream.
To know more about Diffusion please visit :
https://brainly.com/question/7161064
#SPJ11
Need some assistance in science
Answer:
They are Carbohydrates.
Explanation:
Answer:
It's C! Carbohydrates
Explanation:
It is C (carbohydrates) because vegetables, fruits, and grains are primarily made up of carbohydrates, which are a macronutrient that provides energy to the body. Although they do contain some protein and fat, these are not the primary nutrient type found in these foods. Thus, these foods are generally good sources of complex carbohydrates, which are slowly digested, and they are also a good source of dietary fiber.
It is not A (proteins) or B (fats) because while vegetables, fruits, and grains do contain some protein and fat, these macronutrients are not the primary nutrient type found in these foods. The primary macronutrient found in these foods is carbohydrates, which provide the body with energy. Proteins are important for building and repairing tissues, and fats are important for energy storage and insulation, but they are not the main macronutrients found in vegetables, fruits, and grains.
Hope this helps! Let me know if you need more help! :]
4. How could you use this document to argue that the lengthening of the ragweed season in the central US is an important consequence of climate change?
The document provides evidence that the lengthening of the ragweed season in the central US is an important consequence of climate change. According to the document, rising temperatures due to climate change have extended the growing season for ragweed by as much as 27 days in some areas, which has led to an increase in the amount of pollen produced by the plant. The document also notes that ragweed pollen is a significant cause of allergic reactions and asthma, and that the longer growing season has resulted in a longer allergy season for people in the central US.
Furthermore, the document also states that climate models predict that temperatures will continue to rise in the central US, which could further extend the ragweed season and exacerbate the problem for allergy sufferers. This information provides a strong argument for the importance of the lengthening of the ragweed season in the central US as an important consequence of climate change. It highlights the impact of climate change on human health and suggests that the problem is likely to worsen in the future. Therefore, this document can be used to support the claim that the lengthening of the ragweed season in the central US is an important consequence of climate change.
ESSAY: MEDICAL SCIENCE
PLEASE HELP ME I SUCK AT THESE 100 POINTS!! WRITE ME AN ACTUAL ESSAY PLEASE
— research a part of the field of medicine. Select a general area of study from the following suggested topics. Then select a specific topic for detailed research. Write for information to medical associations such as the Arthritis Foundation, National Tuberculosis Association, or National Kidney Foundation.
— The product of your research will be a 1000 word report. Your report should contain:
1. Title page
2. Table of contents
3. Introduction (stating your reason for choosing this particular topic and some questions you expect to answer during your research)
4. Body of information--including pictures, drawings, and charts, if applicable
5. Summary--list ten major facts you learn, including answers to questions you had asked and conclusions you reach
6. Bibliography
below is a list of topics
Answer:
Introduction:
The field of medicine is vast and diverse, with numerous areas of study that are constantly evolving. One area of study that has gained significant attention in recent years is the field of immunology. Immunology is the study of the immune system and its response to various diseases and infections. In this report, we will explore the specific topic of autoimmune diseases, which are conditions in which the immune system attacks healthy cells in the body.
Body of Information:
Autoimmune diseases are a group of disorders that occur when the immune system mistakenly attacks healthy cells in the body. There are over 80 different types of autoimmune diseases, including rheumatoid arthritis, lupus, multiple sclerosis, and type 1 diabetes. These diseases can affect any part of the body, including the skin, joints, muscles, and organs.
The exact cause of autoimmune diseases is not yet fully understood, but it is believed to be a combination of genetic and environmental factors. Some autoimmune diseases are more common in certain ethnic groups, suggesting a genetic component. Environmental factors such as infections, toxins, and stress can also trigger autoimmune diseases in susceptible individuals.
Diagnosis of autoimmune diseases can be challenging, as symptoms can vary widely and may mimic other conditions. Blood tests, imaging studies, and biopsies are often used to diagnose autoimmune diseases. Treatment options for autoimmune diseases include medications to suppress the immune system, as well as lifestyle changes such as diet and exercise.
One area of research in autoimmune diseases is the development of new treatments that target specific components of the immune system. For example, biologic drugs that target specific immune cells or proteins have been developed for the treatment of rheumatoid arthritis and other autoimmune diseases. Stem cell therapy is also being investigated as a potential treatment for autoimmune diseases.
Summary:
Through our research on autoimmune diseases, we have learned several key facts. First, autoimmune diseases are a group of disorders in which the immune system attacks healthy cells in the body. Second, there are over 80 different types of autoimmune diseases, which can affect any part of the body. Third, the exact cause of autoimmune diseases is not yet fully understood, but it is believed to be a combination of genetic and environmental factors. Fourth, diagnosis of autoimmune diseases can be challenging, and treatment options include medications to suppress the immune system and lifestyle changes. Finally, ongoing research is focused on developing new treatments that target specific components of the immune system.
Bibliography:
1. American Autoimmune Related Diseases Association. (2021). Autoimmune Diseases. Retrieved from https://www.aarda.org/diseaselist/
2. National Institute of Allergy and Infectious Diseases. (2021). Autoimmune Diseases. Retrieved from https://www.niaid.nih.gov/diseases-conditions/autoimmune-diseases
3. Mayo Clinic. (2021). Autoimmune Diseases. Retrieved from https://www.mayoclinic.org/diseases-conditions/autoimmune-diseases/symptoms-causes/syc-203 autoimmune diseases.
What does pollination depend heavily on? (Select all that apply.)
- insects
- birds
- gymnosperms
- grass
Answer:
I think it depends heavily on both insects and birds
What makes physical properties different from chemical properties?
Choose the correct answer
O
A) Physical properties relate to elements rather than compounds
B) Physical properties appear only after a chemical change occurs.
C) Physical properties describe elements in the solid state rather than in the liquid or gas state
D) Physical properties can be observed without attempting to change the identity of the substance
Answer:
B Physical properties appear only after a chemical change occurs.
Explanation:
A force of 900 N pushes a wedge 0. 10m into a log. If the work done on the log is 50 j, what is the efficiency of the wedge
The efficiency of the wedge is approximately 55.56%.
The efficiency of the wedge can be calculated using the formula:
Efficiency = (Work output / Work input) x 100%
Where work output is the useful work done by the wedge, and work input is the total work done on the wedge.
In this case, the work input is the force multiplied by the distance the wedge is pushed into the log:
Work input = Force x Distance
⇒ = 900 N x 0.1 m
⇒ = 90 J
The work output is given as 50 J.
Therefore, the efficiency of the wedge is:
Efficiency = (50 J / 90 J) x 100%
⇒ = 55.56%
As a result, the wedge's efficiency is approximately 55.56%. This means that only 55.56% of the total work done on the wedge is converted into useful work, while the remaining energy is lost due to factors such as friction and deformation.
To know more about the Wedge, here
https://brainly.com/question/8853593
#SPJ4
Fill in the Blanks.
Natural selection is the process by which one characteristic of an organism makes it better able to survive and reproduce in the environment than other members of the species.
What is a trait of natural selection?The idea of natural selection is that even the smallest variation in a person's character is kept and chosen if it is found to be beneficial to its survival. The creatures whose qualities are best reasonable for a given ecological condition are probably going to get by and recreate more. This suggests that advantageous variation is selected for species members with a heritable change that allows them to adapt to their environment. The most adaptable characters assist individuals in remaining and growing in number.
Learn more about natural selection :
brainly.com/question/2725702
#SPJ1
16% of a population is unable to taste the chemical ptc. these non-tasters are recessive for the tasting gene. what percentage of the population are heterozygous for the trait?
16% of the population are non-tasters and are recessive for the tasting gene. This means that 48% of the population is either homozygous for the trait (able to taste the chemical PTC) or heterozygous for the trait (able to taste the chemical PTC but carrying a recessive gene). Therefore, the percentage of the population that is heterozygous for the trait is 48%.
If 16% of a population is unable to taste the chemical PTC, then the frequency of the recessive allele (t) in the population can be calculated using the Hardy-Weinberg equation:
[tex]p^{2} + 2pq + q^{2} = 1[/tex]
where p is the frequency of the dominant allele (T) and q is the frequency of the recessive allele (t).
Since the non-tasters are homozygous recessive (tt), we know that:
[tex]q^{2}[/tex] = 0.16
Taking the square root of both sides gives:
q = [tex]\sqrt{0.16}[/tex] = 0.4
Now, we can use the equation to calculate the frequency of the heterozygous genotype (Tt):
2pq = 2(0.6)(0.4) = 0.48
Therefore, approximately 48% of the population is heterozygous for the trait.
Learn more about the Hardy-Weinberg equation:
https://brainly.com/question/16823644
#SPJ11
Need help with this i need proper answer
How do you differentiate the ability to absorb the radiant energy of a material that is colored black to a material that has a reflective color? think of an application of this
This difference arises from the fact that black materials absorb all the colors of the visible spectrum, while reflective materials reflect most of the visible spectrum.
A material that is colored black absorbs almost all the radiant energy that falls on its surface, whereas a material with a reflective color reflects most of the radiant energy that falls on its surface.
One application of this difference can be found in solar panels. Solar panels are designed to absorb as much radiant energy from the sun as possible in order to generate electricity. Therefore, the material used to make solar panels is typically a dark color, such as black, in order to maximize the absorption of radiant energy. On the other hand, buildings in hot climates may use light-colored or reflective materials on their roofs and walls to reflect as much radiant energy as possible in order to reduce the amount of heat that enters the building, thus reducing the need for air conditioning and energy consumption.
Know more about solar panels here: https://brainly.com/question/11727336
#SPJ4
List changes that occur in the cell during metaphase.
The changes that occur during metaphase are highlighted in the section below in detail.
Changes that occur during metaphaseDuring metaphase, the spindle fibers attach to the centromeres of the chromosomes and align them in the center of the cell, the nuclear envelope breaks down, and microtubules move the chromosomes to opposite poles of the cell.
The centrosomes move to opposite poles of the cell, the kinetochores of the chromosomes attach to the spindle fibers, the chromosomes condense and become visible, and the asters form around the centrosomes.
In conclusion, the chromosomes are at their second-most compacted and coiled state during the mitotic phase of the eukaryotic cell cycle, known as metaphase.
Learn more about metaphase here:
https://brainly.com/question/13627503
#SPJ1
Suggest one negative effect on health of high sugars content in foods.
Answer:
negative effect on health of high sugars content in foods are:
1. weight gain
2. fatty liver disease
Answer: One negative effect on health of high sugar content in foods is that it can lead to an increased risk of developing type 2 diabetes. When we consume too much sugar, our body releases insulin to help regulate our blood sugar levels. Over time, consistently high levels of insulin can cause our cells to become less sensitive to insulin, leading to insulin resistance. This can then lead to the development of type 2 diabetes, a chronic condition that can have serious long-term health consequences. In addition to diabetes, high sugar intake has also been linked to obesity, heart disease, and other health problems.
brainliest please ??? (:
calculate the sperm concentration and sperm count using a 1:20 dilution of a specimen with a volume of 4 ml, 30 sperm are counted in two large squares (wbc) of the neubauer hemocytometer.
The sperm concentration and count are 0.75 million/ml and 3 million sperms, respectively, using a 1:20 dilution of a specimen with a capacity of 4 ml, 30 sperm are enumerated in two big squares (WBC) of the Neubauer hemocytometer.
To calculate the sperm concentration and sperm count, we can use the following formulas:
Sperm Concentration (per ml) = Number of sperm counted / (Volume of diluted specimen used * Dilution factor)
Sperm Count = Sperm Concentration * Original specimen volume
In this case, the volume of the specimen is 4 ml, and it was diluted 1:20 (i.e., a 1 ml sample was mixed with 19 ml of diluent). Therefore, the volume of diluted specimen used is:
The volume of diluted specimen used = Specimen volume / Dilution factor
= 4 ml / 20
= 0.2 ml
Next, we count 30 sperm in two large squares (WBC) of the Neubauer hemocytometer. The volume of each large square is 0.2 x 0.2 x 0.1 mm3 = 0.004 mm3.
So, the number of sperm per ml in the diluted specimen is:
Sperm Concentration (per ml) = Number of sperm counted / (Volume of diluted specimen used * Dilution factor)
= 30 / (0.2 ml * 20)
= 0.75 million/ml
To calculate the sperm count, we can use:
Sperm Count = Sperm Concentration * Original specimen volume
= 0.75 million/ml * 4 ml
= 3 million sperm
Therefore, the sperm concentration in the original specimen is 0.75 million sperm per ml, and the sperm count is 3 million sperm.
Learn more about the Neubauer hemocytometer:
https://brainly.com/question/30983609
#SPJ11
TML UN 10. When your body temperature begins to rise, the flow of blood to the skin increases and then the heat passes out of the body. What happens when your body temperature drops?
What is released in the process of making a complex carbohydrate?
Alternative medicine includes a broad variety of therapeutic techniques that are not deemed traditional by the medical community, such as homoeopathy, plant therapies, naturopathy, chiropractic, acupuncture, and others. Some of these treatments are now recognised as being beneficial in certain circumstances.we received reports of unclear medication names. Valtrex (valACYclovir) and Valcyte are both antiviral medications (valGANciclovir). The generic names for these two drugs are remarkably identical, and both the brand and generic names begin with the prefix "val," adding to the appearance and sound-alike confusion.
Methylphenidate short-acting medicines are found in the following strengths: Substance Potency Ritalin 5 mg, 10 mg, and 20 mg, Ritalin SR 20 mg, and methylphenidate 5 mg, 10 mg, and 20 mg.
Doctors prefer to give long-acting stimulants and supplement with a short-acting medication if the long-acting drug's impact goes off. Dextro-methylphenidate is a methylphenidate variant found in Focalin and Focalin XR. This methylphenidate variant is more potent than its standard cousin.
One form of hereditary deafness is inherited with an x-linked recessive allele. What can be expected for the offspring of a deaf mother and a father with normal hearing? multiple choice question. All of the daughters will be deaf and all of the sons will have normal hearing. None of the children will be deaf. All of the children, sons and daughters, will be deaf. All of the sons will be deaf and all of the daughters will have normal hearing
Answer: If the mother is deaf and has an X-linked recessive allele, she must have two copies of the mutant allele (one on each X chromosome). Since men only have one X chromosome, they cannot be carriers of the allele. Therefore, if the father has normal hearing, he must have two normal alleles.
In this case, all of the sons will inherit a normal allele from the father and a mutant allele from the mother, making them deaf. However, none of the daughters will be deaf since they will inherit one normal allele from the father, which will override the mutant allele on the X chromosome inherited from the mother.
Therefore, the correct answer is: All of the sons will be deaf and all of the daughters will have normal hearing.
Enjoy!
you have been asked to examine a bioarchaeological assemblage. you have identified the bones and made the following list of the material: 1 left femur with unfused epiphyses 1 right femur with fused epiphyses 2 adult sacrums 1 cranium with extensive tooth wear 1 mandible with some teeth erupted and others unerupted what is the minimum number of individuals for this assemblage?
While examining a bioarchaeological assemblage. It's been identified bones and made the list of the material. The bioarchaeological assemblage described above includes: two individuals.
Bioarchaeology is a branch of archaeology that examines human skeletal remains to obtain information about the population. The minimum number of people in the bioarchaeological assemblage described in the query is two.
Let's take a closer look at the evidence that supports this claim: One left femur with unfused epiphyses- The epiphyses of this bone have not yet fused, indicating that the person was not yet fully developed. This could be a child's bone.
1 right femur with fused epiphyses- The epiphyses of this bone have fused, indicating that the person was fully developed. It could belong to an adult.
2 adult sacrums- Adult sacrums belong to grown-ups.1 cranium with extensive tooth wear- The cranium has teeth with extensive wear and tear. It could belong to an adult.1 mandible with some teeth erupted and others unerupted- The mandible has some erupted and others unerupted teeth. It could belong to a juvenile.
The epiphyses are used to determine whether a bone belongs to a juvenile or an adult. In juveniles, they are still separate and unfused. In adults, they are fused. As a result, the bioarchaeological assemblage has one unfused and one fused femur, as well as two adult sacrums, which implies that there are two individuals present.
In conclusion, the bioarchaeological assemblage described above includes at least two individuals.
To know more about bioarchaeological refer here:
https://brainly.com/question/18565605#
#SPJ11
in a cross section of the aorta and surrounding regions, the vein that is visualized superficial to the aorta and the origins of the right and left renal arteries and deep to the superior mesenteric artery is the:
In a cross section of the aorta and surrounding regions, the vein that is visualized superficial to the aorta and the origins of the right and left renal arteries and deep to the superior mesenteric artery is the left renal vein.
Cross-sectional imaging is a useful method for visualizing the left renal vein. The left renal vein (LRV) is a vital structure that has a significant impact on the diagnosis and treatment of abdominal disorders. The LRV's shape and dimensions in cross-sectional imaging modalities are variable, which may lead to diagnostic errors.
This might be especially relevant in planning surgeries or vascular interventional procedures.
Let us briefly discuss the different blood vessels that are found in a cross-section of the aorta: Renal arteries: The kidneys' blood supply is provided by the right and left renal arteries. The left renal artery is longer than the right renal artery because it has to pass posterior to the superior mesenteric artery to enter the left kidney.
Aorta: The aorta is a large, thick-walled blood vessel that emerges from the heart's left ventricle. It transports oxygen-rich blood to the body's major organs and tissues. It has three layers: the intima, media, and adventitia.
Superior mesenteric artery: It is one of the three unpaired anterior branches that emerge from the abdominal aorta's anterior surface. It arises from the aorta at L1 and descends behind the pancreas before entering the mesentery. It supplies blood to the midgut and pancreas.
In a cross-sectional view, the left renal vein (LRV) lies anterior to the aorta and posterior to the superior mesenteric artery. It is usually significantly shorter than the right renal vein (RRV) and runs horizontally across the L2 vertebra. It is joined by the left gonadal vein and sometimes the left suprarenal vein.
To know about left renal vein, refer here:
https://brainly.com/question/30701156#
#SPJ11
Please help
T= 200 s
D=5m
S=?
Answer:
To find the speed (S), we need to use the formula:
S = D / T
where D is the distance traveled and T is the time taken.
Substituting the given values, we get:
S = 5 m / 200 s
Simplifying, we get:
S = 0.025 m/s
Therefore, the speed is 0.025 m/s.
Ap environmental science when a rain forest is slashed and burned, the local concentration of carbon dioxide in the atmosphere increases. This is primarily due to