I need some help to determine the mole and grams pls I would really appreciate the help

The food has 23629.64 cal

Given

mass = 1000 g of water

temperature increases 23.65 * C

Required

The energy of the food

Solution

Heat absorbed by water :

Q = m . c . Δt

Q = 1000 g x 4.184 J/g°C x 23.65 °C

Q = 98951.6 J

1 Joules = 0.2388 Calories

98951.6 J = 23629.64 cal

Answer:

Acid Phosphatase (AP) Test

Explanation:

Acid phosphate is an enzyme that is found in the body. It is secreted majorly by the prostrate gland into the seminal fluid. The acid phosphatase test is used to test for the presence of semen in items.

Scott chose the acid phosphatase test because it is very useful in testing for semen on large items such as blankets. The reaction time for an acid phosphatase test for semen is less than 30 seconds. Seeing that the test was completed in three minutes, Scott concluded that the positive reaction was as a result of some other fluid.

The detectives reported that an overturned bowl of grapes and watermelon was found at the scene as well as a broken glass that had contained wine. Scott knew that some fruit juices like that of watermelon give a positive reaction to the acid phosphatase test but with  more time that of the semen fluid because the reaction is a very slow one.

Scott concluded that there was no presence of semen on the blanket and therefore there was no sexual assault.

Answer: The correct order of coefficients is 4, 5, 4 and 6.

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.

The balanced chemical equation is:

[tex]4NH_3+5O_2\rightarrow 4NO+6H_2O[/tex]

The correct order of coefficients is 4, 5, 4 and 6.

Answer:

No. of moles = 0.0685

Explanation:

Given mass, m = 15.5g

We need to find the number of moles in 15.5 g of CaSO₄.5H2O

First, we find the mass of CaSO₄.5H2O.

M = (1×40)+(1×32)+(4×16)+(5×18)

M = 226 g/mol

We know that,

Number of moles = given mass/molar mass

[tex]n=\dfrac{15.5\ g}{226\ g/mol}\\\\n=0.0685\ \text{mol}[/tex]

Hence, there are 0.0685 moles in 15.5 g of CaSO₄.5H2O.

Answer:

The anwer is not D the anwer is A

Explanation:

Answer:

Physical science, in turn, can be divided into chemistry and physics. Chemistry is the study of matter and energy at the scale of atoms and molecules. ... Physics is the study of matter and energy at all scales—from the tiniest particles of matter to the entire universe but i dont really know if there is new information to discover

Explanation:

hope it help and if it doesnt sorry ;)

Answer:

50g

Explanation:

At the end of the burning process, the mass of the jar and smoke should be 50g after the candle burning is done.

In most systems, the law of conservation of matter finds expression. According to this law "matter is neither created nor destroyed but atoms are rearranged".

In this kind of system, no matter is allowed to escaped and the starting mass of the reactants compared to that of the product will be the same.

Answer:

1.57 × 10^-4

one point five seven times ten to the power of negative four

Answer: FeF3      Iron(III) fluoride

Explanation: 5.6 g = 1/10 mole Fe

11.3-5.6g F = 5.7 = 3/10 mole F

Answer:

d.

Explanation:

the electricity is why we can hear sounds from the television and see it

Answer:The correct names for the structure are:

--> 1. 1-bromo-3-chlorobenzene.

--> 3. meta-bromochlorobenzene.

--> 6. m-bromochlorobenzene.

Explanation:

Benzene is the simplest member of the aromatic hydrocarbons. It has a ring structure consisting of six carbon and six hydrogen atoms. This equally means that a benzene can have up to six substituents. One of the chemical properties is that benzene and other members of its series undergo substitution reaction whereby one or more of its six hydrogen atoms is replaced by monoatomic reagents.

Disubstituted benzene consists of two substituents which are described based on either numerical locants or specific words for the three possible forms.

The numerical locant method are used the same naming substitutes of other hydrocarbons. From the question, the numerical locant method was derived through using the following steps:

--> the functional group is benzene

--> there are two substituents which includes bromine( written as bromo) and chlorine ( written as chloro)

--> while placing the number, it's done alphabetically ('1-bromo' comes before '3-chloro') in a clockwise manner. This is to give chorine the lowest locant number.

The second naming method for a disubstituted benzene is the the ortho-, meta-, para- (or their singel letter equivalent) nomenclature method. This is only used for benzene structures.

--> ortho or O : this is used when the substituents are close to each other in the benzene ring.

--> meta or (m) : This is used when the substituents are separated by one carbon in the benzene ring.

--> para or (p): This is used when the substituents are across each other in the benzene ring

From the question, the bromine substituent is separated from the chlorine by one carbon atom, therefore it's meta-bromochlorobenzene or m-bromochlorobenzene.

Answer:

Covalent-network (also called atomic) solids—Made up of atoms connected by covalent bonds; the intermolecular forces are covalent bonds as well. Characterized as being very hard with very high melting points and being poor conductors. Examples of this type of solid are diamond and graphite, and the fullerenes.

I hope it's helpful!

Answer:

network solid

Explanation:

The specific heat : c = 0.306 J/g K

Given

Heat = 35.2 J

Mass = 16 g

Temperature difference : 7.2 K =

Required

The specific heat

Solution

Heat can be calculated using the formula:  

Q = mc∆T  

Q = heat, J  

m = mass, g  

c = specific heat, joules / g ° C  

∆T = temperature difference, ° C / K  

Input the value :

c = Q / m.∆T  

c = 35.2 / 16 x 7.2

c = 0.306 J/g K

Answer:

water

Explanation:

water is made up of both hydrogen and oxygen (h2o)

sorry i can only figure out 1 but the answer is

------------------------------------------------------------------

124

hope you do good on your test :D

Ionic compounds have a high boiling point and be a solid at STP.

Ionic compounds are those compounds which are formed due to high electrostatic attraction between cations and anions.

Ionic compounds are generally present in the solid state because of the presence of strong ionic bond. And due to this rigid structure boiling point of ionic compounds are very high as they want more energy to break their bonds.

Therefor, at standard temperature pressure (STP) ionic compounds will likely have a high boiling point and be a solid at STP.

To learn more about ionic compounds, visit below link:

https://brainly.com/question/11638999

Answer:

See explanation and image attached

Explanation:

The  Gilman reagent is a lithium and copper (diorganocopper) reagent with a general formula R2CuLi.  R is an alkyl or aryl group.

They are useful in the synthesis of alkanes because they react with organic halides to replace the halide group with an R group.

In this particular instance, we intend to synthesize propylcyclohexane. The structure of the  lithium diorganocopper (Gilman) reagent required is shown in the image attached to this answer.

Answer:

Density, d = 5.96 g/mL

Explanation:

Given that,

Mass, m = 105 g

Volume, V = 17.6 mL

We need to find the density of the substance. So,

[tex]d=\dfrac{m}{V}\\\\d=\dfrac{105\ g}{17.6\ mL}\\\\d=5.96\ g/mL[/tex]

So, the density of the substance is 5.96 g/mL.

Answer:

4d orbital.

Explanation:

Hello!

In this case, since zirconium's atomic number is 40, we fill in the electron configuration up to 40 as shown below:

[tex]1s^2,2s^2,2p^6, 3s^2,3p^6,4s^2,3d^{10},4p^6,5s^2,4d^2[/tex]

Thus, the orbital 4d is partially filled.

Best regards!

Answer:

an aquifer is a renewable resource

Explanation:

Aquifers are defined as the groundwater found deep in the layers of rocks.

An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.

Some of the deep aquifers are considered as  nonrenewable resource because it toll hundreds of years to accumulate.

Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.

Answer:

1. aa

2. They have similar DNA

Explanation:

1. According to the question 1, wrinkled seeds (A) are dominant over round seeds (a) in pea plants. This means that, based on the law of dominance proposed by Mendel, wrinkled seeds will be expressed over round seeds in a heterozygous state (Aa).

However, since the round seed phenotype is a recessive trait, it will only be expressed when the alleles for round seeds (a) are the same in the gene i.e. aa genotype.

2. Based on the information in question 2, Ricky, who is working on a family tree for his school project, realizes that his close relatives all look similar in the pictures he collected. This is possible because of the SIMILARITY OF THEIR DNA (genetic material). Note that, relatives are connected by the genes that are inherited from one another, hence, they possess a similar DNA, which is the most valid reason for the resemblance.

Answer: 1075.5 mph

Explanation:anything moving at 4.78*10^4 cm/sec

equivalent to

cm —> miles = 1/1.6*10^5

sec —> hr = 1/3600

[4.78*10^4]*3600/1.6*10^5 = 1075.5 mph

Answer: Decrease in size

Explanation:

Electronegativity is defined as the property of an element to attract a shared pair of electron towards itself.

On moving across a period from left to right,   the size of an atom decreases because the electrons get added to the same shell and the nuclear charge keeps on increasing. Thus the electrons get more tightly held by the nucleus.

As, the size of an element decreases, the valence electrons come near to the nucleus. So, the attraction between the nucleus and the shared pair of electrons increases. Thus electronegativity increases.

Answer:

5.13 g of CO₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

C₁₂H₂₂O + 17O₂ —> 12CO₂ + 11H₂O

Next, we shall determine the mass of C₁₂H₂₂O that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:

Molar mass of C₁₂H₂₂O = 182 g/mol.

Mass of C₁₂H₂₂O from the balanced equation = 1 × 182 = 182 g

Molar mass of CO₂ = 12 + (2×16)

= 12 + 32

= 44 g/mol

Mass of CO₂ from the balanced equation = 12 × 44 = 528 g

SUMMARY:

From the balanced equation above,

182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.

Finally, we shall determine the mass of CO₂ produced from the reaction. This can be obtained as follow:

From the balanced equation above,

182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.

Therefore, 1.77 g of C₁₂H₂₂O will react to produce = (1.77 × 528)/182 = 5.13 g of CO₂.

Thus, 5.13 g of CO₂ were obtained from the reaction.

The question is incomplete, the complete question is;

Suppose 1.87g of nickel(II) bromide is dissolved in 200.mL of a 52.0mM aqueous solution of potassium carbonate. Calculate the final molarity of nickel(II) cation in the solution. You can assume the volume of the solution doesn't change when the nickel(II) bromide is dissolved in it. Be sure your answer has the correct number of significant digits. The answer is needed in M.

Answer:

0.0428 M

Explanation:

The equation of the reaction is;

NiBr2 + K2CO3 → NiCO3 + 2KBr

Number of moles of NiBr2 = mass/molar mass = 1.87 g/218.53 g/mol =

8.557 *  10^-3 moles

Now, we know that the Ni^2+ comes from the NiBr2. Also, the concentration of Ni^2+ in NiBr2 = concentration of Ni^2+ in NiCO3

So,

Concentration of Ni^2+ = 8.557 *  10^-3 moles/0.2 L = 0.0428 M

Answer:

[tex]1.05x10^{24}atoms[/tex]

Explanation:

Hello!

In this case, according to the definition of the Avogadro's number, it is possible to realize that one molecule of CO2 contains 3 moles of atoms, one of carbon and two of oxygen, thus, we have:

[tex]0.580molCO_2*\frac{3mol\ atoms}{1molCO_2} =1.74mol\ atoms[/tex]

Then, we use the Avogadro's number to obtain:

[tex]1.74mol\ atoms*\frac{6.022x10^{23}atoms}{1mol\ atoms} \\\\1.05x10^{24}atoms[/tex]

Best regards!

Answer:

Krypton

Explanation:

Answer:

its less negative hope I helped buster

Because trans isomers are more stable than cis isomers, the cis isomer will have a less negative heat of formation than the trans isomer.

Cis- and trans isomers are compounds that have different configurations in space because of the presence of a rigid structure or functional groups in their molecule.

Cis atoms have functional groups on the same side.

Trans isomers have functional groups on alternate different.

The structure of cis-1-bromor-2-butene is attached.

Generally, trans isomers are more stable than cis isomers..

Stable compounds have more negative heat of formation while unstable compounds have less negative heat of formation.

Therefore, the cis isomer will have a less negative heat of formation than the trans isomer.

Learn more about cis and trans isomers at: https://brainly.com/question/4625349