I do not quite understand this, anyway someone can help? I'll give brainliest to the correct answer!
Answers
To solve for number one we must follow these steps:
m = 703.55 g − 345.8 g
m = 357.75 g
Then we solve for the density-
d = 357.75 g / 225 mL
d = 1.59 g/mL
Answer for number 5) 1.59 g/mL
Density= Mass/Volume
therefor- Mass = 65.14g and Volume = 35.4mL
Density = 65.14g/35.4 mL = 1.84 g/mL
Answer for number 6) 1.84 g/mL
Question 7-
g = (0.8765 g/mL)(250.0 mL) = 219.1 g
Answer: 219.1 g
Question 8-
Density = mass/volume
Mass = 1587g
4.5cm x 5.2cm x 6cm = 140.4 cubic-cm
Volume = 140.4 cubic-cm
Mass/volume = 1587/140.4 = 11.3 g/cm^3
Answer: 11.3 g/cm^3
Question 9:
First calculate the volume of iron
49.10mL − 45.50mL = 3.60mL
Density = mass/volume;
density = 28.5g/3.60 mL= 7.92 g/mL
Answer: 7.92 g/mL
Question 10:
Volume = 2500.0g / 10.5g/cm3 = 238.095cm^3
Now we round up the answer to 238cm^3
Answer: 238cm^3
I hope this helped!
Related Questions
Question 1 (2 points)
Which option can be classified as a pure substance?
Question 1 options:
heterogenous mixture
solution
homogenous mixture
compound
Question 2 (2 points)
Law of conservation of mass states that:
Question 2 options:
matter is destroyed
matter does not change
matter is neither created nor destroyed
matter is created
Question 3 (2 points)
What is a property of bases?
Question 3 options:
all of the above
Sour taste
Slippery touch
Ability to form hydronium ions+
Question 4 (2 points)
Which property do solutions with low pH values have?
What does it mean to have a neutral pH? - Aseptic Health
Question 4 options:
have a -OH group
feels slippery
turns litmus paper blue
tastes sour
Question 5 (2 points)
How do the products of chemical reactions compare to their reactants?
Question 5 options:
The products often have completely different properties than the reactants.
The products are usually more toxic than the reactants.
The products usuallyhave more mass than the reactants.
The products usually have more atoms than the reactants.
Question 6 (2 points)
Which of the following is an example of a physical change?
Question 6 options:
Water freezing into ice.
A piece of wood burning.
A toy car rusting.
Zinc producing hydrogen gas when mixed with water.
Question 7 (2 points)
What might happen if you mixed a strong acid with an equally strong base?
Question 7 options:
You would see an explosive chemical reaction.
The base would destroy the acid.
You'd wind up with a pH-neutral salt and water.
The acid would destroy the base.
Question 8 (2 points)
In the equation shown, what are the reactants?
2H2+O2àH2O
Question 8 options:
Hydrogen and oxygen molecules (2H2 and O2 )
Ice crystals
Hydrogen atoms (H)
Water molecules (H2O)
Question 9 (2 points)
Which phrase most accurately describes a chemical change?
Question 9 options:
A change in form
A change in taste
A change on the molecular level
A change in appearance
Question 10 (2 points)
What does it mean when there is a physical change?
Question 10 options:
A new substance has been formed.
Matter has changed from one substance into a new substance.
Matter has changed size, shape or form
Matter has changed on the molecular level.
help pls ill give 20 points!
Answers
Answer:
I didn't KNOW WHAT IS THE ANSWWR OF YOUR QUISTION IM SO SORRY
Explanation:
I WANT TO INTRODUCE SELF TO YOU CAN I
Write a 4-6 sentence paragraph using science vocabulary, full sentences, proper grammar, and details explaining the difference between plant cells and animal cells. Science...
Answers
Answer:
Plant cells and animal cells are both eukaryotic cells. They both have a nucleus, Golgi complex, endoplasmic reticulum, ribosomes, mitochondria, cytoskeleton and cell membrane. Only plants cells have a vacuole, cell wall and chloroplast, while animal cells have cilia, centrioles and lysosomes which plant cells don't usually have. Because of their cell walls plant cells are in rigid rectangular shapes while animal cells have looser round shapes. The main difference in their functions is that animals don't produce their own food while plan cells do.
Balance this equation: _____ C3H8 + _____ O2 --> energy + _____ CO2 + _____ H2O
Answers
There will be 10 oxygens on the products side and 2 on the reactants so to balance these out, we multiply the 02 on the reactants side by 5. The final equation will be C3H8 + 502 ----> 3CO2 + 4H20.
- BRAINLIEST answerer
10m/s for 30 seconds
Answers
Answer:
300 meters for 30 seconds
Explanation:
10*30= 300 therefore giving you your answer.
Vote brainliest!
Which of the following is/are considered alcohols?
a CH3OH
b CH3CH2OH
C CH3CH2CH2OH
d All of the above
Answers
Answer: THE ANSWER IS D
Explanation:
an alcohol is a hydrocarbon chain with an hydroxyl group (OH)
A, B, AND C ARE ALL ALCOHOLS, SO THE ANSWER IS D
describe the manufacture of ethanol from hexane?
Answers
Answer:
This page looks at the manufacture of alcohols by the direct hydration of alkenes, concentrating mainly on the hydration of ethene to make ethanol.
The steps in the ethanol production process include milling the corn to meal, liquefying the meal by adding water and cooking, breaking down starch into sugar, using yeast to ferment the sugar to ethanol, distilling the ethanol by boiling off and condensing it by removing residual water and finally denaturing so that...
The salt which in solution gives a pale green precipitate with sodium hydroxide solutionanda white precipitate with barium chloride solution is?
Answers
Answer:
Analytical Chemistry. The salt which in solution gives a pale green precipitate with sodium hydroxide solution and a white precipitate with barium chloride solution is : Iron (III) sulphate.
the apparatus in the figure below is used for the electrolysis of water. hydrogen and oxygen gas are collected in the two inverted burets. an inert electrode at the bottom of the left buret is connected to the negative terminal of a 6 v battery, whereas the electrode in the buret on the right is connected to the positive terminal. a small quantity of sodium carbonate is added to speed up the electrolytic reaction.
Answers
At the left side; the balanced half equation is:
[tex]\mathbf{2H_2O _{(l)} + 2e^- \to H_{2(g)} + 2OH^{-}_{(aq)}}[/tex]
At the right side, the balanced half equation is:
[tex]\mathbf{4OH^-_{(aq)} \to O_{2(g)} + 2H_2O_{(l)} + 4e^-}[/tex]
The objective of this question is to determine the balanced half-reaction for the electrodes on the left and the right side.
A half-reaction is an oxidation-reduction reaction part of a redox reaction where we make sure both half-reactions are balanced by multiplication of the reactions with appropriate numbers in order to have an equal number of electrons.
According to the given information:
The overall cell reaction can be expressed as:
[tex]\mathbf{H_2O_{(l)} \to H_{2(g)} + \dfrac{1}{2}O_{2(g)}}[/tex]
At the left side; the balanced half equation can be expressed as:
[tex]\mathbf{2H_2O _{(l)} + 2e^- \to H_{2(g)} + 2OH^{-}_{(aq)}}[/tex]
At the right side, the balanced half equation can be expressed as:
[tex]\mathbf{4OH^-_{(aq)} \to O_{2(g)} + 2H_2O_{(l)} + 4e^-}[/tex]
Learn more about the electrolysis of water here:
https://brainly.com/question/22352373?referrer=searchResults
the largest source of anthropogenic greenhouse gases in the united states is
Answers
Answer:
Human activities are responsible for almost all of the increase in greenhouse gases in the atmosphere over the last 150 years. The largest source of greenhouse gas emissions from human activities in the United States is from burning fossil fuels for electricity, heat, and transportation.
Which of the following shows a valid combustion reaction?
2Al + 2O2 → 2AlO + O2
C2H4 + 3O2 → 2CO2 + 2H2O
2CH4 + O2 → 2CO + 4H2
Ca + O2 → CaOH
Answers
Combustion reaction means two common products
CO_2H_2OOption B is correct
[tex]\\ \sf\longmapsto C_2H_4+O_2\longrightarrow 2CO_2+2H_2O[/tex]
things which are matter but not substance
Answers
Answer:
Vacuum
Explanation:
It may be bounded by a volume. Energy: Light, heat, kinetic and potential energy, and sound are non-matter because they are massless. Objects that have mass and are matter may emit energy.
What are the four groups of carbon compounds found in living things?
Answers
describe the development of the theory of atomic structure
this question is worth 6 marks
Answers
Indique cuáles son las unidades de la molaridad *
eq-g/m³
eq-g/L
mol/cm³
mol/L
Answers
Answer:
hm
Explanation:
for each type of geometry in the simulation, examine the resulting bond angles by clicking the show bond angles checkbox. based on your observations for each geometry, provide the bond angles at the indicated locations for the two-dimensional representations of the three-dimensional structures.
Answers
The bond angles in PCl5 are 90° and 180° respectively. The bond angle in NH4^+ is 109°.
Bond angles refer to the angle between two atoms bonded to the same central atom. Several factors such as electronegativity difference and presence or absence of lone pairs on the central atom all affect the bond angle.
For NH4^+, the indicated bond angle is 109° and the specie is tetrahedral. For the specie, SF6, the indicated bond angles are 90° and 180° respectively. For HCN, the indicated bond angle is 180°. For PCl5, the indicated bond angles are 90° and 180° respectively.Learn more: https://brainly.com/question/2192784
What could be a reason for the difference between the theoretical and experimental heats of reaction
Answers
Answer:
Theoretical value is the value a scientist expects from an equation, assuming perfect or near-perfect conditions. Experimental value, on the other hand, is what is actually measured from an experiment. Rarely (in fact never) are these numbers the same.
Take the area of a sheet of paper. I know that the area of a rectangle can be found by multiplying the lengths of both sides together. I can assume an 8.5x11 sheet, so I calculate exactly 93.5 square inches. This is my theoretical value. When I actually do the measurements on my paper, it turns out my paper has been slightly cut on one end, or I’m measuring with a shoddy ruler. Therefore, I might measure only 92.8 square inches. This is my experimental value. See thats it’s close, but not exact.
Expanding on this concept, quantum mechanics is so widely accepted in the scientific community because many theoretical values calculated by mathmaticians concurred with experimental values to many, many decimal places. These would be constants such as Plank’s Constant, energy levels of harmonic potentials, and energy levels of the hydrogen atom.
Explanation:
Theoretical result is based on information and mathematics. Trials or experiments are the foundation of experimental result. What ought to occur is theoretical probability. What actually occurs is experimental probability.
What is difference between theoretical and experimental result ?The definition of theoretical probability. It is not necessary to do the experiment and then analyze the findings for theoretical probability. The theoretical probability, however, represents what you anticipate will occur in an experimnet.
In experimental probability, information is gathered via repeated experimentation. In theoretical probability, data is gathered without doing the experiment by taking into account every possibility that has a chance of occurring.
Thus, difference between the theoretical and experimental heats of reaction the incomplete combustion may result in the formation of carbon and carbon monoxide instead of carbon dioxide and water.
To learn more about difference between theoretical and experimental result refer the link below;
https://brainly.com/question/535992
#SPJ2
Which of the following are phase changes? (Select all that apply.)
melting
gases
sublimation
reactions
Answers
Answer:
- melting
- sublimation
Explanation:
A phase change is a, well, change between phases. Solid to liquid. Gas to solid. Etc. Gases is a phase, but not a change. Reactions is a change, but not a phase change. This leaves us with melting (solid to liquid) and sublimation (solid to gas).
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
A clasping handshake may be used as an analogy for an enzyme-catalyzed reaction because it represents the specific manner in which an enzyme ________. folds to form secondary and tertiary structures interacts with water binds substrate is denatured by low pH
Answers
A clasping handshake is similar to the way in which enzymes bind to substrates in enzyme-catalyzed reactions.
Enzymes are biological catalysts that speed up the rates of biological reactions by lowering the minimum energy required by reactants in order to arrive at products.
Enzymes are able to achieve this feat by substrate-enzyme binding. The substrate binds to the enzyme in its active site, becomes products, and the products are released from the active site of the enzyme. Thus, the enzyme is free for the binding of another substrate.
More on enzyme-catalyzed reactions can be found here: https://brainly.com/question/6658074
What will a wave look like with high amplitude and long wavelength?
A. Tall and narrow
B. Short and narrow
C. Tall and wide
D. Short and wide
Answers
Answer:
A tall and narrow A tall and narrow
Explanation:
Answer:
A. Tall and Narrow
Explanation:
The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength. But high amplitude waves tend to be short spent and tall narrow linings.
2- Bromo – 2 – methyl propane is :
(a) Primary alkyl halide
(b) Secondary alkyl Halide
(c) Tertiary alkyl amine
(d) Tertiary alkyl Halide
Answers
Answer:
(B) SECONDARY ALKYL HALIDE
JWhat type of evidence is gathering information through your senses or using scientific tools?
Predictions
Results
Scientific research
Observations
Answers
What's the Matter?
Which statements correctly describe matter? Select all that apply.
A. Matter is made up of atoms.
B. Matter is a measure of the amount of material in an object.
C. Matter may exist as a solid, liquid, or gas.
D. Matter forms when particles chemically bond together.
E. Matter includes both elements and compounds.
Answers
Answer:
Matter is anything that takes up space and has mass. Mass is the stu that matter is made of, or the amount of particles in a substance or object. Matter has physical and chemical properties and can undergo physical and chemical changes
C. Matter may exist as a solid, liquid, or gas.
Explanation:
which temperature scale avoids negative temperatures
Answers
Answer:
See below:
Explanation:
Hello! My name is Galaxy and I will be helping you today. I hope you are having a nice day.
There are 3 main ways to measure temperatures, you have Celsius, Fahrenheit, and Kelvins.
Celsius and Fahrenheit are main ways to measure heat in non-scientific terms, althought they are used sometimes when needed.
Kelvins are used for Science as they are precise and can deal with temperatures that are super hot or super cold.
The lowest temperature in Kelvins is 0 degrees Kelvin, also known as Absolute Zero. There are no temperatures above that. So the answer to your question would be Kelvins.
how many valence electrons are there in a magnesium atom?
Answers
Answer:
Magnesium has 2 valence electrons.
what does not happen when the temperature is increased ?
Answers
convert 120 mm to feet
Answers
Answer:
0.393701
Explanation:
Some single-celled organisms make copies of themselves through mitosis. Which describes the function of the cell cycle in such single-celled organisms?
Answers
Answer:
mitosis?
Explanation:
Some single celled organisms make copies of themselves through mitosis
In unicellular organisms such as bacteria, mitosis is a type of asexual reproduction, making identical copies of a single cell. In multicellular organisms, mitosis produces more cells for growth and repair.
Calculate the solubility of copper (II) iodate in 0.16 M copper (II) nitrate. Ksp* is 7.4x10-8 M3. *You should know that the Ksp must refer to the copper iodate because all nitrate compounds are soluble and strong electrolytes!
Answers
Answer:
solubility in presence of 0.16M Cu(IO₃⁻)₂ = 3.4 x 10⁻⁴M*
Explanation:
Cu(IO₃⁻)₂ ⇄ Cu⁺² + 2(IO₃⁻)
C(i) ---------- 0.16M 0M
ΔC ---------- +x +2x
C(f) ---------- 0.16 + x ≅ 0.16M* 2x
Ksp = [Cu⁺²][IO₃⁻]²
7.4 x 10⁻⁸M³ = 0.16M(2x)² = 0.64x²
x = solubility in presence of 0.16M Cu(IO₃⁻)₂ = SqrRt(7.4x10⁻⁸M³/0.64M²)
= 3.4 x 10⁻⁴M*
*Note: This is consistent with the common ion effect in that a reduction in solubility is expected. The normal solubility of Cu(IO₃⁻)₂ in pure water at 25°C is ~2.7 x 10⁻³M.
In the malate-aspartate shuttle, _____ is reduced to _____ in the cytosol. oxaloacetate; malate aspartate; malate malate; aspartate malate; oxaloacetate aspartate; oxaloacetate
Answers
The malate-aspartate shuttle enables oxidative phosphorylation by allowing electrons to be moved across the inner membrane in the mitochondrion during glycolysis in eukaryotes.
In this malate-aspartate shuttle, oxaloacetate is reduced to malate in the cytosol.
During this biochemical system process, the cytosolic malate dehydrogenase which is the primary enzyme present in this shuttle system catalyzes the reaction of oxaloacetate and NADH to produce malate and NAD in the cytosol. This system enables oxidative phosphorylation in eukaryotes.Learn more: https://brainly.com/question/17216910
Element Dy has 3 known isotopes. If.2% of the sample has a mass of 160
amu, .06% has a mass of 160.9 amu and the remaining has a mass 162
amu, what is the predicted mass of Dy?
Answers
Answer:
this girl in my class is getting a dog
Explanation:
but shes annoying so im hit her