How to do this question plz ​

How To Do This Question Plz

Answers

Answer 1

Answer:

Let L be the length of the wire.

N λ = M L      where N is the number of wavelengths λ. Also, M and are integers and L is the length of the wire

There must be nodes at the ends of the wire and anti-nodes at the points of zero displacement - λ/2, λ, 3λ/ 2, etc.

The simplest would be 2 λ = L   or L = λ / 2

In such a situation one would have

N-A-N    or node-antinode-node

There is a 180 degree phase change upon reflection of the wave creating the standing wave

The distance between nodes or anti-nodes must be λ/2 and there must  be nodes at the ends of the wire


Related Questions

light of wavelength 633 nm from a distant source is incident on a slit 0.750 mm wide, and the resulting diffraction pattern is observed on a screen 3.50 m away.

Answers

Answer:

because of the gravity of the earth

Both igneous and sedimentary rock can become metamorphic rock if enough ________________ are applied.

Answers

Enough heat and pressure
I hope this helps.

Help it’s multiple choice 11 through 15 please!

Answers

1. • Here, force of gravity on the block = 20 N.

• Therefore, the normal force will also be the same, i.e., 20 N [According to Newton's Third Law, on every action, there is an equal and opposite reaction]

• The coefficient

[tex] u_{k} = 0.4[/tex]

• Force of friction =

[tex]u_{k} \times \: normal \: \: \: force \\ = 0.4 \times 20N \\ = 8N[/tex]

• Hence, the force of sliding friction between the block and the ground is 8 N.

• So, it is option c. 8 N

2. The answer is option d. continue in the same direction with no change in speed.

We know, force = mass × acceleration. When force is 0, then acceleration will also be 0 since mass cannot be 0. So, there will be no change in speed.

3. It is option b. force that is required to give a one kilogram object the acceleration of 1 m/s^2.

Newton is the SI unit of force. As mentioned earlier, force = mass × acceleration. The SI unit of mass and acceleration is Kg and m/s^2 respectively.

So, 1 N = 1 Kg × 1 m/s^2.

4. It is d. not zero.

Acceleration is the change in speed. So, if the force is zero, then acceleration will not occur.

5. Force = 2 N

Acceleration of the object A = 2 m/s^2.

Acceleration of the object B = 1 m/s^2.

Therefore, mass of the object A = 2 N ÷ 2 m/s^2 = 1 Kg

And, mass of the object B = 2 N ÷ 1 m/s^2 = 2 Kg

So, the mass of object B is greater than that of object A.

Hence, the answer is option c. Object B has more mass.

Hope you could get an idea from here.

Doubt clarification - use comment section.

A 100 g mass of tungsten at 100.0°C is placed in 200 g of water at 20.0°C. The
mixture reaches equilibrium at 21.6°C. Calculate the specific heat of tungsten

Answers

ok so basically

If you,
q= 100g x 4.186 j/g*degrees C * (21.6 degrees C- 20.0 degrees C) which equals to 1.6.

So q= 100g * 4.186 j/g*deg C * 1.6

The specific heat capacity of tungsten given the data from the question is 0.17 J/gºC

Data obtained from the question

Mass of tungsten (M) = 100 g

Temperature of tungsten (T) = 100 °C

Mass of water (Mᵥᵥ) = 200 g

Temperature warm water (Tᵥᵥ) = 20 °C

Specific heat capacity of the water (Cᵥᵥ) = 4.184 J/gºC

Equilibrium temperature (Tₑ) = 21.6 °C

Specific heat capacity of tungsten (C) = ?

How to determine the specific heat capacity of tungsten

Heat loss = Heat gain

MC(T – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)

100 × C × (100 – 21.6) = 200 × 4.184(21.6 – 20)

100 × C × 78.4 = 1338.88

Divide both sides by 100 × 78.4

C = 1338.88 / (100 × 78.4 )

C = 0.17 J/gºC

Learn more about heat transfer:

brainly.com/question/6363778

#SPJ2

A 25 N force acts on a box moving along a plane at a distance of 20 meters. What is the work it does with this force?

Help!!​

Answers

Answer:

500 J.

Explanation:

Work done = force * distance

= 25 * 20

= 500 Joules.

The Earth currently has an orbital period of 1 year and a semi-major
axis length of 1 AU. If the Earth's orbit changed and the semi-major
axis length increased to 1.1 AU, how would the Earth's orbital period change?

A: It would increase by 0.15 years

B: It would increase by 0.032 years

C: It would decrease by 0.15 years

D: It would decrease by 0.032 years

Answers

The Earth's orbital period change is A: It would increase by 0.15 years

Using Kepler's third law which states that the square of the orbital period of the planet is directly proportional to the cube of its distance from the sun.

So, T² ∝ R³

T'²/T² = R'³/R³ where

T = orbital period at R = 1 yearR = initial axis length = 1 AUT' = orbital period at R'R' = final axis length = 1.1 AU.

So, making T' subject of the formula, we have

T' = [√(R'/R)³]T

T' = [√(1.1 AU/1 AU)³] × 1 year

T' = [√(1.1)³] × 1 year

T' = √1.331 × 1 year

T' = 1.15 × 1 year

T' = 1.15 years.

So, the change in the Earth's orbital period ΔT = T' - T

= 1.15 years - 1 year

= 0.15 years

Since this is positive, the orbital period increases by 0.15 years.

So, the Earth's orbital period change is A: It would increase by 0.15 years

Learn more about Kepler's third law here:

https://brainly.com/question/16546004

describe how visible light is used with solar photovoltaic panels to produce electricity

Answers

Solar panels convert the sun's light into usable solar energy using N-type and P-type semiconductor material. When sunlight is absorbed by these materials, the solar energy knocks electrons loose from their atoms, allowing the electrons to flow through the material to produce electricity.

Photovoltaic panels are used to produce alternating current using sunlight. It uses solar cells which are photoactive and produce a photoelectric effect and thereby a potential is created.

What is photoelectric effect?

When photons from the light energy is hit on a metallic surface the photon collides with the electrons of the metals and electrons are ejected from the metal surface. This phenomenon is called photoelectric effect.

In a solar photovoltaic panel, photovoltaic cells layers of semi-conducting materials, such as silicon, are sandwiched photovoltaic cells. When photons from sunshine strike each layer, its unique electronic properties energise and produce an electric field.

The current required to generate electricity is produced through what is known as the photoelectric effect. Electricity produced by solar panels is in the direct current form. This is then transformed into an alternating current by passing via an inverter.

To find more about photoelectric effect, refer the link ;

https://brainly.com/question/26465043

#SPJ5

A block of mass 1.0 kg rests on a trolley of mass 4.0 kg. The coefficient of dynamic friction between the block and the trolley is 0.30. A horizontal force f = 5.0 n acts on the block. The block slides over the trolley. What is the acceleration of the trolley?

Answers

Answer:

the acceleration of the trolley is the acceleration of the trolley is 0.75 m/s^-2

Explanation:

friction force between the block and the trolley

= 1×0.3×9.8

= 2.94 N

(F = ma)

the acceleration of the trolley

= friction force/mass

= 2.94/4

= 0.735 m/s^-2

= 0.75 m/s^-2

The acceleration of the trolley will be 0.75 m/s².Acceleration is the ratio of the force to the mass.

What is the friction force?

It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).

Mathematically it is defined as the product of the coefficient of friction and normal reaction.

The friction force between the block and the trolley is found as;

[tex]\rm F_f = \mu N \\\\ \rm F_f = \mu \times mg \\\\ \rm F_f = 0.30 \times 1 \timess 9.81 \\\\ \rm F_f= 2.94 \ N[/tex]

Mechanical force is equal to the product of the mass and the acceleration which is equal to the frictional force;

[tex]\rm F_f =F=ma \\\\ \rm a = \frac{F}{m} \\\\ \rm a = \frac{2.94}{4} \\\\ a=0.735 \ ms^{-2}[/tex]

Hence the acceleration of the trolley will be 0.75 m/s².Acceleration is the ratio of the force to the mass.

To learn more about the friction force refer to the link;

https://brainly.com/question/1714663

If the forces acting on an object at rest are ______,the object will remain at rest.

Answers

Answer:

friction. or gravity both ofbthem .....................

..

anyone to help with this question​

Answers

Answer:

i can

Explanation:

i know what's the answer

Recoil is noticeable if you throw a heavy ball while standing on roller skates. If instead you go through the motions of throwing the ball but hold onto it, your net recoil velocity will be

Answers

Answer:

Since there is no external force, there is no change (movement) in the center of mass. Internally, the center of mass might change position, but the external result is still zero net velocity.

The net recoil velocity must be zero.

the breaks on a 15,680 N car exert a stopping force of 640 N.

Answers

The brakes on a 15,680 N car exert a stopping force of 640 N. The car's velocity changes from 20.0 m/s to 0 m/s.

Calcula el valor de la velocidad de las ondas sonoras en el agua sabiendo que su
densidad es 1.10 3 kg/m 3 y su módulo de comprensibilidad vale 2,16x10 9 N/m 2 ¿Cuál
es la longitud de onda de las ondas sonoras en el agua si su frecuencia es de 1000hz?

Answers

La velocidad de las ondas sonoras es aproximadamente 1469,694 metros por segundo. La longitud de onda de las ondas sonoras es 1,470 metros.

1) Inicialmente, debemos determinar la velocidad de las ondas sonoras a través del agua ([tex]v[/tex]), en metros por segundo:

[tex]v = \sqrt{\frac{K}{\rho} }[/tex] (1)

Donde:

[tex]K[/tex] - Módulo de compresibilidad, en newtons por metro cuadrado.[tex]\rho[/tex] - Densidad del agua, en kilogramos por metro cúbico.

Si sabemos que [tex]\rho = 1\times 10^{3}\,\frac{kg}{m^{3}}[/tex] y [tex]K = 2,16\times 10^{9}\,\frac{N}{m^{2}}[/tex], entonces la velocidad de las ondas sonoras es:

[tex]v = \sqrt{\frac{2,16\times 10^{9}\,\frac{N}{m^{2}}}{1\times 10^{3}\,\frac{kg}{m^{3}} } }[/tex]

[tex]v\approx 1469,694\,\frac{m}{s}[/tex]

La velocidad de las ondas sonoras es aproximadamente 1469,694 metros por segundo.

2) Luego, determinamos la longitud de onda ([tex]\lambda[/tex]), en metros, mediante la siguiente fórmula:

[tex]\lambda = \frac{v}{f}[/tex] (2)

Donde [tex]f[/tex] es la frecuencia de las ondas sonoras, en hertz.

Si sabemos que [tex]v\approx 1469,694\,\frac{m}{s}[/tex] y [tex]f = 1000\,hz[/tex], entonces la longitud de onda de las ondas sonoras es:

[tex]\lambda = \frac{1469,694\,\frac{m}{s} }{1000\,hz}[/tex]

[tex]\lambda = 1,470\,m[/tex]

La longitud de onda de las ondas sonoras es 1,470 metros.

Para aprender más sobre las ondas sonoras, invitamos a ver esta pregunta verificada: https://brainly.com/question/1070238

John does 3.2J of work to lower the window shade in her bedroom a distance of 0.8m. How much force must John exert on the window shade?

Answers

Answer:

[tex]\boxed {\boxed {\sf 4 \ Newtons}}}[/tex]

Explanation:

Work is energy transferred when an object is moved. It is the product of force and distance.

[tex]W= F*d[/tex]

John did 3.2 Joules of work or 3.2 Newton meters of work (the units are equivalent). The window shade was lowered a distance of 0.8 meters.

W=3.2 N*m d= 0.8 m

Substitute the values into the formula.

[tex]3.2 \ N *m = F * 0.8 \ m[/tex]

We are solving for the force, so we must isolate the variable F. It is being multiplied by 0.8 meters. The inverse operation of multiplication is division, so divide both sides of the equation by 0.8 m.

[tex]\frac {3.2 \ N*m}{0.8 \ m}= \frac{ F* 0.8 \ m}{0.8 \ m}[/tex]

The units of meters cancel.

[tex]\frac {3.2 \ N}{0.8 }=F[/tex]

[tex]4 \ N = F[/tex]

John must exert 4 Newtons of force.

when did humans learn that the earth is not the center of the universe?

Answers

Answer:

When did humans learn that the Earth is not the center of the universe?

Answer

1

Follow

Request

More

Ad by Odoo

Odoo: The open-source CRM!

Keep track of leads and opportunities, personalize sales cycles, and control forecasts with Odoo CRM!

Learn More

4 Answers

Asked in 3 Spaces

Science - Next Generation

Alexander Somm

, Consultant, Investor Relations at Novelpharm AG (2015-present)

Answered Oct 16

What, it isn’t?!

Sorry, I had to.

As far as I have read and understood, the Sumerians and later the Babylonians both had astronomical calendars that already differentiated planets and stars. Earth was not the center to them, the Sun likely was. That was around 2,200 - 1,600 BC.

After that, Greek philosopher Aristarchus of Samos (310 - 230 BC) was the first (recorded) to have believed the solar system was organized around the Sun, rather than the Earth. His heliocentric model was unpopular during Aristarchus’ lifetime, although it would inspire astronomers centuries later, such as Copernicus and Galileo.

Now, there are numerous archeological findings (cave paintings) and studies, that all suggest an understanding of complex astronomy in prehistoric times dating back as far as 40,000 years. This also explains how early, prehistoric migrants may have navigated the seas.

Explanation:

hope it helps

have a good day

. A teacher pushes a desk across the floor for a distance of 5 meters. She exerted a horizontal force of 20N. How much work was done?

Answers

Force (F) = 20 NDistance (s) = 5 mAngle between the force and distance (Θ) = 0°We know, work done = Fs Cos ΘTherefore, the work done by the teacher = (20 × 5 × Cos 0°) J = (20 × 5 × 1) J = 100 J

Answer:

100 J work was done.

Hope you could get an idea from here.

Doubt clarification - use comment section.

As best you can, describe how we can tell the age of the Earth and rocks found on it.

Answers

Answer:

We can determine the age of the Earth and the rocks found on Earth with techniques such as measuring ice cores and digging and analysing fossils.

Explanation:

Hopefully this helped!

A pitcher throws a softball

Answers

Answer:

Did you forget the answers

Explanation:

if so leave in comments and i will try to figure out

Answer:

what is the question and the answers??

If the energy in a mechanical wave increases or decreases, what is also going to increase or decrease? A wavelength B amplitude с frequency d refraction​

Answers

Answer:

i think wave lengh not 100% sure tho

If the energy of the mechanical wave will increase or decrease, then the wavelength will also change accordingly. Hence, option A is correct.

What is Wavelength?

The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm). The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.

Frequency, which is defined as the number of wave cycles per second, and wavelength have an inverse relationship. The wavelength of a signal decreases with increasing frequency, or we can say that wavelength and refractive index are inversely proportional to each other.

To know more about Wavelength:

https://brainly.com/question/13533093

#SPJ2

1. Which of these is not a spherical mirror?
a) Concave mirror
b) Convex mirror
c) Plane mirror
d) None of these

Answers

Answer:

C.Plane mirror this is the answer of this question.

None of the above. That is option D.

A spherical mirror is defined as a mirror that has a surface that reflects curved rays. It is also called a curved mirror.

Types of spherical mirror include:

Concave mirror: This has a reflective surface that is curved inward and away from the light source. It reflects light inward to one focal point.

Example of concave mirror are Torch lights and automobile headlights.

Convex mirror: These are the spherical mirror that reflects light outwards and towards the light source.

Example of convex mirror is the magnifying glasses and telescopes.

Plane mirrors: This is a type of spherical mirror with a flat surface. Reflection of light occurs in plane mirror but it's center of curvature is infinite because it's flat.

Therefore, concave, convex and plane mirrors are all examples of a spherical mirror.

Learn more about plane mirrors here:

https://brainly.com/question/3459308

A water balloon is launched with a speed of 40 m/s at an angle of 60 degrees to the horizontal. What is the vertical component of the velocity?

a 40 m/s
b 34.6 m/s
c 0 m/s
d 20 m/s

Answers

Vertical component = 40 m/s x sin(60) = 34.6 m/s

Answer: b. 34.6 m/s

Something has a mass of 40 kg and a velocity of 1 m/s


How much kinetic energy does it have?

Part 2: If it doubles its mass, will its KE also double?

Answers

m=40kgv=1m/s

[tex]\\ \sf\Rrightarrow K.E=\dfrac{1}{2}mv^2[/tex]

[tex]\\ \sf\Rrightarrow K.E=\dfrac{1}{2}(40)(1)^2[/tex]

[tex]\\ \sf\Rrightarrow K.E=20J[/tex]

Part 2:-m=80kg

[tex]\\ \sf\Rrightarrow K.E=\dfrac{1}{2}(80)(1)^2[/tex]

[tex]\\ \sf\Rrightarrow K.E=40J[/tex]

Yes

If you were traveling 60 mph and not wearing a seatbelt and collided with a fixed object, how fast would you be traveling when you hit the windshield

Answers

Your speed when your car hits a fixed object is 60 mph.

The given parameters:

Your initial speed, v = 60 mph

What is relative velocity?

Relative velocity tells us how fast we are traveling from a fixed point or reference point.

When travel at 60 mph in a car, you are moving at the same rate with the car.If you are not wearing a seat belt, when you hit a fixed object, you will move forward at the same rate as the car's speed.

Thus, we can conclude that your speed when your car hits a fixed object is 60 mph.

Learn more about relative velocity here: https://brainly.com/question/17228388

Which statement describes the magnetic field inside a bar magnet? It points from north to south. It points from south to north. It forms loops inside the magnet. There is no field within the magnet.

Answers

Inside the bar magnet, the magnetic field points from north to south. Statement A is correct.

Magnetic Field:

It is defined as a vector field or the influence of the magnet on the electric current, charges and ferromagnetic substance.

The strength of magnetic field is depends up on the numbers of magnetic field lines per unit area.

Magnetic field lines emerge from the North pole and end in the South pole of a bar magnet. Inside the magnet are also present inside the bar magnet and never intersect at any point.

Therefore, inside the bar magnet, the magnetic field points from north to south.

To know more about Magnetic Field:

https://brainly.com/question/19542022

Answer:b

Explanation:

why does rhododendron not grow well in the terai region of nepal give reason

Answers

Answer:

Tge Rhododendrob is the national flower of Nepal. The hills and mountain sides ranges of Nepal are decorated with diff colours and shapes

Block A has a mass of 2kg and a speed of 50 m/s along the positive x axis.

Block B has a mass of 4 kg and a speed of 25 m/s along the negative x axis.



The two blocks collide head-on in a perfectly elastic collision.

Determine the velocity of each mass after the collision.

Answers

Momentum is conserved, so

(2 kg) (50 m/s) + (4 kg) (-25 m/s) = (2 kg) v₁' + (4 kg) v₂'

where v₁' and v₂' are the velocities of the two blocks after the collision. Simplifying this gives

100 kg•m/s - 100 kg•m/s = (2 kg) v₁' + (4 kg) v₂'

0 = (2 kg) v₁' + (4 kg) v₂'

v₁' = -2v₂'

Energy is also conserved, so

1/2 (2 kg) (50 m/s)² + 1/2 (4 kg) (-25 m/s)² = 1/2 (2 kg) (v₁')² + 1/2 (4 kg) (v₂')²

Simplifying yields

2500 J + 1250 J = (1 kg) (v₁')² + (2 kg) (v₂')²

3750 J = (1 kg) (v₁')² + (2 kg) (v₂')²

Substitute v₁' = -2v₂' and solve for v₂' :

3750 J = (1 kg) (-2v₂')² + (2 kg) (v₂')²

3750 J = (6 kg) (v₂')²

(v₂')² = 625 J/kg = 625 m²/s²

v₂' = 25 m/s

Then the first block has final velocity

v₁' = -2 (25 m/s)

v₁' = -50 m/s

PLEASE HELP!!
5. A 700 kg race car travels
around the track at 65 m/s. The track has a radius of 75 m.

a. What is the centripetal acceleration?

b. What is the centripetal force?

c. Is the net force on the car less than, equal to, or greater than the centripetal force? Why?

Answers

Hi there!

a.

The equation for centripetal acceleration is as follows:

[tex]\large\boxed{a_c = \frac{v^2}{r}}}[/tex]

Plug in the given values to solve:

[tex]\large\boxed{a_c = \frac{(65)^2}{75} = 56.33 m/s^2}[/tex]

b.

According to Newton's Second Law:

[tex]\large\boxed{\Sigma F = ma}}[/tex]

The acceleration is v²/r, so the net force is:

[tex]\large\boxed{\Sigma F = m(\frac{v^2}{r})}}[/tex]

Multiply by the given mass:

[tex]\large\boxed{\Sigma F = 700(56.33) = 39433.33 N}}[/tex]

c.

There is NO net force in the vertical direction since the object is NOT accelerating in the vertical direction (normal force and weight cancel).

Thus, the ONLY net force experienced by the object is in the horizontal direction and is EQUAL to the centripetal force.

A 0.07 kg tennis ball, initially at rest, leaves a racket with a speed of 56 m/s. If the ball is in contact with
the racket for 0.04 s, what is the average force on the ball by the racket?


A 0.07 kg tennis ball, initially at rest, leaves a racket with a speed of 56 m/s. If the ball is in contact with
the racket for 0.04 s, what is the average force on the ball by the racket?


0.57 N


32 N


98 N


0.00005 N

Answers

From Newton's second law of motion, the average force on the ball by the racket is 98 Newtons. The correct answer is option C

Given that a 0.07 kg tennis ball, initially at rest, leaves a racket with a speed of 56 m/s. And the time for contact with the racket is 0.04 s, that is,

mass m = 0.07 kg

velocity v = 56 m/s

time t = 0.04 s

force f = ?

To calculate the average force on the ball by the racket, let us apply Newton's second law of motion.

Impulse = change in momentum

ft = mv

Substitute all the parameters into the equation above

0.04f = 0.07 x 56

make f the subject of the formula

f = 3.92 / 0.04

f = 98 N

Therefore, the average force on the ball by the racket is 98 Newtons. The correct answer is option C

Learn more about momentum here: https://brainly.com/question/7538238

The average force on the ball by the racket is 98 N. The correct option is the third option - 98 N

From the question, we are to determine the average force on the ball by the racket.

From the formula,

[tex]F = \frac{mv}{t}[/tex]

Where F is the force

m is the mass

v is the velocity

and t is the time

From the given information

m = 0.07 kg

v = 56 m/s

t = 0.04 s

Putting the parameters into the formula,

we get

[tex]F = \frac{0.07 \times 56}{0.04}[/tex]

[tex]F = \frac{3.92}{0.04}[/tex]

F = 98 N

Hence, the average force on the ball by the racket is 98 N. The correct option is the third option - 98 N

Learn more on calculating force exerted on an object here: https://brainly.com/question/13590154

Name a device or gadget that converts
a) Heat energy to mechanical energy b) heat energy to light energy
c)electrical energy to sound energy

Answers

Answer:

a heat engine converts heat to mechanical energy.

electric generator

explain why an astronaut on moon seems to be attracted only to the moon

Answers

Answer: the gravitational attraction on the Moon is much less than it is here on Earth, and a person weighs less on the Moon.

Explanation:

Other Questions
manish ko jiban ma kasta samasya haru aipardaxa 4. What is the leading critique of the electoral college? 2.7 Persepolis Define the following terms in regards to graphic novel what is 7/8 x 4 ? ( 7/8 is a fraction) Dawn walks into a customer's office with her sales presentation planned and immediately recognizes that the customer is upset about something. In this situation, Dawn should Dawn walks into a customer's office with her sales presentation planned and immediately recognizes that the customer is upset about something. In this situation, Dawn should: a. maintain a happy and cheerful demeanor. b. sit down immediately and begin the presentation. c. All of the answers are correct. d. say something funny in an attempt to lighten the customer's mood. e. ask if she should come back some other time for the meeting. Describe what a continent is Learners with a _____ learning style prefer reading, writing, and speaking. naturalistic logical/mathematical verbal/linguistic none of the above Why doesn't the skater ever regain his potential energy? How is the New Mexico Bill of Rights different from the US Bill of Rights? What part of the microscope give us a sharper image?amicro or fine focusmacro focuslight sourceon/off button Help help pelsss I need to pass thanks Ill give points for honestly Who were the critics of the First New Deal, and what were their criticisms? Which is correct? I wanna make sure im right In the equation 9.55 1.10 = 10.505, what are the factors? A. 9.55 and 10.505 C. 9.55 and 10.505 B. 1.10 and 10.505 D. 9.55 and 1.10 Help me out please??? A planet has a circular orbit around a star. It is a distance of 65,000,000 km from the centre of the star. It orbits at an average speed of 65,000 km/h. How many Earth days does it take the planet to orbit the star? Give your answer to 2 sf. -8 Find the slope of the line y = -8/2x+1/5 Simplify your answer and write it as a proper fraction, improper fraction, or integer. What is the solution to the system of equations? y = -2x 6 4x - y = -36A (15, 24) B (-7, 8)C (-5, 4) what can you conclude about gregor mendel from the information presented in the movie? what is the difference between christianity and catholicism?