Answer:
n = 11.45 mol
Explanation:
Given data:
Number of moles = ?
Volume of gas = 98 L
Pressure = 2.8 atm
temperature = 292 K
Solution:
The given problem will be solve by using general gas equation,
PV = nRT
P= Pressure
V = volume
n = number of moles
R = general gas constant = 0.0821 atm.L/ mol.K
T = temperature in kelvin
2.8 atm × 98 L = n × 0.0821 atm.L/ mol.K × 292 K
274.4 atm.L = n × 23.97atm.L/ mol
n = 274.4 atm.L /23.97atm.L/ mol
n = 11.45 mol
Describe the current model of the atom. Name the parts of this model and describe each part.
Answer:
the electron cloud model is the current model of atom
Which element wants to gain valence electrons while bonding?
a. Neon (Ne)
b. Fluorine (FI)
c. Lithium (Li)
d. Magnesium (Mg)
Answer:
b. Fluorine (FI)
Explanation:
From the given choices, only fluorine wants to gain valence electrons while bonding.
This is because fluorine is the most electronegative specie from the given choices. An electronegative substance have a high tendency to attract electrons to itself in a bond.
Neon is a noble gas and it is stable. Lithium and Magnesium are metals that are electropositive. They prefer to lose electrons than to gain electrons.tell me about yourself
Answer:
Tell picture above is a sample of tell me about yourself
Bobbye wants to know how his speed affect the amount of time it takes to stop at a stop sign. Each time he performs a trial, he will change the speed that he is driving to see how it affects the amount of time it takes to stop. Independent Variable: Dependent Variable: Controlled Variables:
Answer:
The correct answer is -
Independent Variable: change of speed
Dependent Variable: time takes to stop
Controlled Variables: stop at a stop sign
Explanation:
To know the effect of the speed to take the time to stop at a stop sign Bobbye perform this exercise where he changes the speed at each time that he is driving to know the time it takes to stop at a stop sign. There is a change that takes place purposely is in the speed of driving so it is an independent variable as the independent variable is a variable that is manipulated in an experiment or investigation.
The time it takes to stop is the factor that depends on the speed so it is the dependent variable as the dependent variable is the variable that depends on the independent variable.
The control variable remains the same or constant in an investigation which is stoping at a stop time irrespective of speed.
Sodium will do an ionic bond with
Answer:
Chorine
Explanation:
It's a classic, sodium chloride, table salt, which is an ionic bond.
PLS GIVE BRAINLIEST
increased amounta of carbon dioxide in Earth's atmosphere may lead to global warming. what might global warming then lead to
air temperatures increasing.
The production of 2-methyl-2-phenyl propane. This would be a two-step synthesis.
Can someone explain what is this reaction ?
What is the difference between carbon-12, carbon-13, and carbon-14?
Answer:
Number of neutrons in the nucleus.
Explanation:
Mass number is protons plus neutrons. Protons do not change from isotope to isotope
yo, i need help. 25 points and brainliest. :|
Answer:
here's your answer...
Explanation:
Full moon, also hey lol.
have a germ-free day.
can you guys help me
Answer:
B) 6 Newtons
Explanation:
Applied Force = 10 N
Resistive Frictional Force = 4 N
As we know that frictional forces always act in the opposite of the relative motion [force], and that opposite forces always subtract.
Hence,
The Net Force acting on the block = 10 N -4 N = 6 Newtons
Answer: The Answer is B
BRAINLEST WILL BE GIVEN TO A RIGHT ANSWER!!!!
Potassium (K) has a charge of +1, and sulfur has a charge of –2. Which best describes the compound they make?
A) The chemical formula is K2S, and the name is potassium sulfide.
B) The chemical formula is KS2, and the name is potassium sulfide.
C) The chemical formula is K2S, and the name is sulfur potassium.
D) The chemical formula is KS2, and the name is sulfur potassium.
Answer:
A) The chemical formula is K2S, and the name is potassium sulfide. Explanation:
edge
Which type of bond will chromium atoms likely to form with other chromium atoms
A:ionic
B:covalent
C:metallic
Answer: B
Explanation: Covalent bonds where electrons are not shared equally between two atoms are called polar covalent bond. As shown above, the electrons in a covalent bond between two different atoms (H and Cl in this case) are not equally shared by the atoms. This is due to the electronegativity difference between the two atoms.
There are two types of chemical compound one is covalent compound and other is ionic compound in chemistry. The covalent bond will be formed between two chromium atoms. the correct option is option B.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
Covalent bond formed by sharing of electron and ionic bond formed by complete transfer of electron.
Element with same electronegativity difference combine together by covalent bond whereas ionic bond is formed by elements whose electronegativity difference is high.
As two chromium is combining that is two two element with same electronegativity is combining therefore, formation of covalent bond is the only possibility.
Therefore covalent bond will be formed between two chromium atoms. the correct option is option B.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ2
What is the number of protons for the following?
190
+2
Os
76
Answer:
190+2=192
Explanation:
192 add it 192 added
Answer: they are right
Explanation:
The force of attraction between one polar molecule and another polar molecule is
Answer:
Dipole-dipole forces
Explanation:
A polar compound is that compound which contains atoms that have a difference in charges i.e electrostatic attraction occurs between its constituent atoms. Polar molecules are attracted to other polar molecules with opposite charges and her held together with the aid of certain forces
The attractive force between the negative part of a polar molecule (-) and the positive part of another polar molecule (+) is called DIPOLE-DIPOLE FORCES. This dipole-dipole force gets stronger with an increasing polarity of the molecules involved.
A control is....
A: What we measure
B: What we change
C: What we measure that does not have the variable we are testing.
D: What we conclude
A metal atom and a non-metal atom bond together. What type of bond do they form?
Question 8 options:
Ionic
Round
Covalent
Glue
Answer: Iconic
Explanation:Ionic bonds are formed through the exchange of valence electrons between atoms, typically a metal and a nonmetal.
A balloon filled with helium occupies 21.0ft³ at 55.0°F. Find the temperature of the helium if the volume of the balloon decreases to 11.0ft³. (Assume that the pressure is held constant.)
Answer:
Assuming pressure is held constant,the question reduces to a ratio and proportion type of question where;
At constant pressure,
21.0ft³-55.0°F
11.0fy³=11.0ft³/21.0ft³×55°F
The temperature is 28.809°F≈29°F
29°F is the temperature of the helium if the volume of the balloon decreases to 11.0ft³.
What is temperature?Temperature expresses hotness and coldness or a measure of the average kinetic energy of the atoms or molecules in the system.
Assuming pressure is held constant, the question reduces to a ratio and proportion type of question where;
At constant pressure,
21.0ft³- 55.0°F
11.0fy³ = 11.0ft³ ÷ 21.0ft³ × 55°F
The temperature is 28.809°F ≈ 29°F
Hence, 29°F is the temperature of the helium if the volume of the balloon decreases to 11.0ft³.
Learn more about temperature here:
brainly.com/question/28004147
#SPJ2
Why are liquid and gas molecules different
Which of the following values displays the pH of a base?
Question 19 options:
2
7
9
Answer:
9 is your answer
Explanation:
coz anything above 7.0 is Base on PH paper !
Hope you got it.
Which describes a covalent bond?
a. Formed by the sharing of electrons between atoms
b. Formed by the giving and taking of electrons between atoms.
c. Formed by the forces of gravity between atoms.
d. Formed by sharing protons and neutrons between atoms
Answer:
a
Explanation:
covalent bonds are bonds between two nonmetals where they share an electron :)
9. A box is pushed 1.5 m to the right in 5 s. What is the box’s average speed to the nearest hundredth of a m/s? *
Answer:
s = 0.30 m/s
Explanation:
Given data:
Distance travel = 1.5 m
Time taken = 5 s
Average speed of box = ?
Solution:
s = d/t
s = speed
d = distance
t = time
by putting values,
s = 1.5 m/ 5 s
s = 0.30 m/s
Magnesium reacts with hydrochloric acid to produce hydrogen gas and magnesium chloride. What
volume of hydrogen gas is theoretically produced in cubic millimeters, if 4.9 g magnesium reacts
with excess hydrochloric acid? The reaction is taking place at 101.5 kPa pressure and 20°C.
using PV=mRT/Mr
V=(4.9×8.31×(273+20))/(24.3×101.5×10^3)
=4.84×10^-3 m^3
=4.84×10^6 mm^3
Which of these properties can be used to separate mixtures? - characteristic properties *
1. state of matter
2. mass
3. volume
4. boiling/melting point
5. density
6. conductivity
7. solubility
Answer:
Boiling/melting point
Explanation:
Some elements can’t handle the heat nor the cold, so they separate like oil & water.
In chemistry class, Allen determined the effectiveness of various metals in releasing hydrogen gas from hydrochloric acid. Several weeks later, Allen read that a utilities company was burying lead next to iron pipes to prevent rusting. Allen hypothesized that less rusting would occur with the more active metals. He placed the following into 4 separate beakers of water: (a) 1 iron nail, (b) 1 iron nail wrapped with an aluminum strip, (c) 1 iron nail wrapped with a magnesium strip, and (d) 1 iron nail wrapped with a lead strip. He used the same amount of water, equal amounts (mass) of the metals, and the same type of iron nails. At the end of 5 days, he rated the amount of rusting as small, moderate, or large. He also recorded the color of the water. What is the independent variable?
a) the amount of water
b) the metals strips
c) amount of rust
d) hydrochloric acid
Answer:
b) the metals strips
Explanation:
In an experimental design, an independent variable is a variable that is changed or manipulated in a series of experiments. An independent variable is not dependent on any other variable in the experiment. The hypothesis for this experiment is stated to be: "If the chemical activity of the metallic wrapper is increased, then less rusting of iron will occur. The independent variable relates to the type of metal wrapping strip, and the dependent variables are the amount of rusting and color of the water.
If the atomic number increases then the atomic radius should decrease right? So what’s wrong with my data
Answer:
Atomic radius increases by increasing the atomic number.
Explanation:
Atomic radius :
Atomic radius is the distance between nucleus of an atom to its outer most electronic shell.
Trend along group:
As we move down the group atomic radii increased with increase of atomic number. The addition of electron in next level cause the atomic radii to increased. The hold of nucleus on valance shell become weaker because of shielding of electrons thus size of atom increased.
As the size of atom increases the ionization energy from top to bottom also decreases because it becomes easier to remove the electron because of less nuclear attraction and as more electrons are added the outer electrons becomes more shielded and away from nucleus.
The given data show that the atomic number in increased from 4 to 88 it means atomic radius also increased from 1.53Å to 2.83Å. It means the given data is the elements of periodic table present in group. It is the data of 2nd group of periodic table.
the first 5 elements (in increasing order) that are found in group 18
Answer:
Today, I will present the first eighteen elements which are Hydrogen, Helium, Lithium, Beryllium, Boron, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Sodium, Magnesium, Aluminum, Silicon, Phosphorus, Sulfur, Chlorine, and Argon.
First 5: Hydrogen. The first and simplest element on the periodic table.
Helium. a very light colorless element that is one of the six inert gasses.
Lithium. A very soft, light metal.
Beryllium. A very light metal; although it is 3 1/2 times the density of Lithium.
Boron. The fifth element in the periodic table.
Explanation:
What determines whether something is a solid, a liquid or a gas?
10 divided by 2 im confused
if your serious about this question then it is 5
How would an invasive species affect an ecosystem?
Group of answer choices
The invasive species would integrate easily into the ecosystem.
The invasive species would take over in the area and throw off the balance of the ecosystem.
The invasive species would balance the ecosystem.
The invasive species would change the abiotic factors in the area.
Answer:
The invasive species would take over in the area and throw off the balance of the ecosystem.
Explanation:
Invasive species can harm both the natural resources in an ecosystem as well as threaten human use of these resources. An invasive species can be introduced to a new area via the ballast water of oceangoing ships, intentional and accidental releases of aquaculture species, aquarium specimens or bait, and other means.
Invasive species are capable of causing extinctions of native plants and animals, reducing biodiversity, competing with native organisms for limited resources, and altering habitats. This can result in huge economic impacts and fundamental disruptions of coastal and Great Lakes ecosystems.
Hope this helped!
Select the conditions that are required for the formation of hurricanes. (Choose 3)
A: cold,cyclonic wind
B: deep ocean water
C: cold ocean water
D: warm,humid wind
E: warm ocean water
F: a strong cold front
Answer:
A: cold, cyclonic wind
B: deep ocean water
C: cold ocean water
E: warm ocean water
F: a strong cold front
You only need A, B, C, E, F not D because that for tornadoes buddy.