Answer:
A less-intense wave will have fewer decibels than a more-intense wave.
Explanation:
sound is measured in units called decibels (dB). The higher the decibel level, the louder the noise. On the decibel scale, the level increase of 10 means that a sound is actually 10 times more intense, or powerful.
Lysol Power Toilet Bowl Cleaner contains 9.5% hydrochloric acid. Explain why this would be necessary to clean toilet bowls that have white or rust-coloured deposits
Answer:
The acid will absolutely remove the hard water deposits that are trapping the stains. The longer it soaks, the less you have to scrub. It works for hard water stains, limescale, and rust!
Explanation:
hope this helped you out.
Mrs. Franklin decides to use her new aluminum pan to scramble eggs. She wants to determine how much heat energy will be needed to
heat her aluminum pan from 20 degrees celsius to 220 degrees celsius. She obtains the specific heat of aluminum from the reference
table. It lists the specific heat of aluminum as 0.90 N/kg*degrees celsius. The pan has a mass of 0.5 kg. She does the calculation
correctly. Which one of the following is her answer?
Your answer:
0.45 joules of heat energy
O 0.9 kilojoules of heat energy
O 90 kilojoules of heat energy
180 joules of heat energy
Answer:
90 kilojoules of heat energy
Explanation:
I don't really know why this is just the answer to it on my quiz so if someone else can explain.
Multiple Choice
1. Think About the definition of remote sensing. Which of the following could be considered sensors?
2. When satellite images are analyzed a unit called the pixel is a key to calculating what?
3. One Pixel represents.
a temperature
a wind speed of 10 kilometers per hour
a land area of 30 by 30 meters
various colors depending on their size
Answer:
Remote sensing is the process of detecting and monitoring the physical characteristics of an area by measuring its reflected and emitted radiation at a distance (typically from satellite or aircraft). ... Cameras on satellites can be used to make images of temperature changes in the oceans.
2.The answer is Land Area. If you know the distance and scale at which the image was captured, than one pixel of the image is equal to an X amount of area. The land area is represented as one pixel in an image called Resolution.
3.A pixel is the smallest picture element addressable on a picture, it is a specific location, and at that location associated with that location, is color, intensity
a.mph (miles per hour), mph. knots, knots. m/s (meters per second), m/s. ft/s (feet per second), ft/s. km/h (kilometers per hour), km/h ...
Explanation:
7 kph 4.35 mph
8 kph 4.97 mph
9 kph 5.59 mph
10 kph
The apparatus or tools that could be considered as sensors are telecopes, probes and landsat satellites.
What is remote sensing?Remote sensing can be defined as a process that is used for the acquisition of information about a phenomenon or physical object on a planet without coming in close contact with it, especially through the use of a telecope, probe or landsat satellite.
When satellite images are analyzed by astronomers or scientists, a unit called the pixel is a key to calculating land area. Also, one pixel is a unit that represents a land area of 30 by 30 meters.
Read more on telescope here: https://brainly.com/question/18300677
HELP !
The provided balanced equation applies to the reaction that takes place between lithium hydroxide and sulfuric acid. 2LiOH + H2SO4 -> Li2SO4 + 2H2O .
If the reaction begins with 26.7 grams of lithium hydroxide (LIOH) and 164.08 grams of suite acid (H2SO4.), how many grams of lithium sulfate (Li2SO4,) is produced? Assume 100% yield . Round your answer to the nearest tenth of a gram .
Answer:
60g or 61.28g
Explanation:
Trust me on this I had the same problem as you
. If 30.0 grams of copper (II) chloride reacts with 40.0 grams of sodium nitrate, what is the limiting reactant?
Answer:
The limiting reactant is copper (II) chloride
Explanation:
here you go
What is PO3 compound name?
Answer:
PHOSPHITE ION is the correct answer.
Explanation:
Hope this helped Mark BRAINLIEST!!!
Calculate magnetic moment of a divalent ion in aqueous solution, if the electronic configuration is [Ar] 3d5 .
Answer:
5.47 B.M
Explanation:
✓We were given electronic configuration of argon as [Ar] 3d5.
✓This is a divalent ion. It has atomic number of 25.
✓magnetic moment can be calculated using below expresion
√[n(n+2)] .....................eqn(1)
✓ It has 5 unpaired electrons. Then n= 5
✓ [n(n+2)]
✓ substitute the ( n= 5) into eqn(1)
Then magnetic moment= [n(n+2)]
= [ 5(5+2) ]
= 5.47BM
Why must an electron absorb a quantum of energy to move to a higher energy level?
Answer:
For an electron they start at the first level (n=1) In order to move up to the next level (n=2) the amount of quantom energy to move to this next level the energy must be perfect in order to move. If the quantom energy is to small the electron it doesn't try.
Commercially available concentrated hydrochloric acid is 37.0% w/w HCl. Its density is 1.18g/ml. Calculate the molarity of concentrated HCl?
Answer:
M = 12.0M
Explanation:
Hello there!
In this case, according to the given by-mass percent of HCl, which can be set up in terms of mass of HCl over mass of solution, we can calculate the molarity, by multiplying by the density to get the mL's of solution and further convert to liters. Moreover, the molar mass of HCl (36.46 g/mol) must be also used to calculate the moles, since molar units requires moles of solute and liters of solution as shown below:
[tex]M=\frac{37.0gHCl}{100g\ sln}*\frac{1.18g\ sln}{1mL\ sln}*\frac{1000mL\ sln}{1L \ sln}*\frac{1molHCl}{36.46gHCl}\\\\M= 12.0M[/tex]
Best regards!
Combustion engines became common in the mid-1800s when people began to use them to power ships, trains, and
machinery in factories. Combustion engines add carbon dioxide to the air, and as a result, carbon dioxide in the
atmosphere increased quickly. How did this change the total amount of energy in the Earth system, and how did this
change happen? How did this affect global average temperature?
I need help please and don’t send the fake link): < just to get points
Answer:
The correct answer is - increased the global average temperature.
Explanation:
Combustion is the process that increases the carbon dioxide in the atmosphere, which results in entering more energy into the Earth system than existed from it. Therefore, the amount of energy increased in the system of the earth or surface of the earth.
The reason behind it is that carbon dioxide trapped and redirects energy back toward the Earth's surface, which is absorbed by Earth's surface and surface increased, and global average temperature increased.
Combustion process increases the global average temperature of the earth by absorbing and emitting the energy revert back to earth.
What is combustion?Combustion is a process exothermic process in which organic molecules burns in the presence of oxygen to produce energy in the form of heat and light and CO₂ gas.
CO₂ gas is a green house gas which traps the energy of the atmosphere and revert back it into the earth surface, due to which temperature of the earth surface and atmosphere increases which results in the elevation of global average temperature.
Hence, combustion increases the global average temperature.
To know more about combustion, visit the below link:
https://brainly.com/question/15246277
What is the pH at the equivalence point in the titration of 10.0 mL of 0.39 M HZ with 0.200 M NaOH? Ka = 2.4 × 10−6 for HZ.
Answer:
pH = 9.37
Explanation:
The reaction of HZ with NaOH occurs as follows:
HZ + NaOH → H₂O + Na⁺ + Z⁻
When the reaction is in the equivalence point, the moles added of HZ = Moles of NaOH.
At equivalence point, you will have in solution just NaZ that is in equilibrium with water as follows:
Z⁻(aq) + H₂O(l) ⇄ OH⁻(aq) + HZ(aq)
Where K of equilibrium is Kw / Ka = 1x10⁻¹⁴ / 2.4x10⁻⁶ = 4.17x10⁻⁹
And K is defined as:
K = 4.17x10⁻⁹ = [OH⁻] [HZ] / [Z⁻]
To solve this question we must find [Z⁻] and as [OH⁻] and [HZ] comes from the same equilibrium, both are equal and we can find [OH⁻] in order to solve pH:
Moles NaOH added = Moles HZ:
0.010L * (0.39mol / L) = 3.9x10⁻³ moles HZ = Moles NaOH added
The volume of 0.200M NaOH must be:
3.9x10⁻³ moles * (1L / 0.200moles) = 0.0195L.
The moles of HZ = Moles Z⁻ after the reaction and the volume is 0.010L + 0.0195L = 0.0295L. Thus, [Z⁻] is:
[Z⁻] = 3.9x10⁻³ moles / 0.0295L
[Z⁻] = 0.132M
Replacing in K expression:
4.17x10⁻⁹ = [OH⁻] [HZ] / [Z⁻]
4.17x10⁻⁹ = [X] [X] / [0.132]
5.51x10⁻¹⁰ = X²
X = 2.35x10⁻⁵M = [OH⁻]
As pOH = -log [OH⁻]
pOH = 4.63
And pH is
pH = 14 -pOH
pH = 9.37Which change is an environmental effect of destroying wetlands?
loss of habitat
less flooding
smog
acid rain
Answer: Trust me 100% plz its loss of habitat wat they said
Explanation:
When the air near the surface is heated, it rises, taking heat with it. The type of energy transfer involved here is what?
What event occurs when the
tension built up along Earth's
plates is released causing one
plate to slip past another?
Answer:
An earthquake
Explanation:
2. How many moles of hydrogen are produced from the reaction of 3.86 moles of zinc with an excess of
hydrochloric acid?
Answer:
as per given balanced equation one mole Zn produces 1mole Hydrogen
when reacted with excess acid.
So 3 moles Zn will give 3moles Hydrogen
Explanation:
According to the balanced chemical equation, one mole of Zn produces one mole of hydrogen . Therefore, 3.86 moles of Zn metal will produce 3.86 moles of hydrogen gas.
What is mole ratio ?Mole ratio refers to the ratio of the number of moles of one substance in a chemical reaction to the number of moles of another substance in the same reaction.
It is derived from the balanced chemical equation for the reaction, which indicates the relative amounts of each substance involved in the reaction.
Mole ratio is important in stoichiometry, which is the study of the quantitative relationships between reactants and products in a chemical reaction.
The given chemical reaction is written as follows:
Zn + 2 HCl ⇒ ZnCl₂ + H₂
According to the balanced chemical equation, one mole of Zn produces one mole of hydrogen . Therefore, 3.86 moles of Zn metal will produce 3.86 moles of hydrogen gas.
Find more on mole ratio :
https://brainly.com/question/15288923
#SPJ2
9) What is the density of the gold rock with a mass of 386 grams and has a volume of 20 cubic centimeters?
O 0.193 g/cc
O 193 g/cc
O 1.93 g/cc
19.3 g/cc
Answer:
density= mass/volume
hence density of gold rock
= 386/20
=19.3 g/cc
what happen when a piece of silver metal is added to the copper sulphate solution
Answer:
Explanation:When silver Ag metal is added to copper sulphate CuSO4 solution, no reaction takes place as silver is less reactive than that of copper and cannot displace copper from its solution. Hence, when a piece of silver metal is added to copper sulphate solution there will be no reaction.
Answer:
There will be no reaction
Explanation:
Therefore, when silver Ag metal is added to copper sulphate CuSO4 solution, no reaction takes place as silver is less reactive than that of copper and cannot displace copper from its solution. Hence, when a piece of silver metal is added to copper sulphate solution there will be no reaction.
On a hot day, a student places a glass of cold lemonade on a table outdoors. After a few minutes, water droplets have formed on the outside of the glass.
Is energy absorbed or released by the cold lemonade? Explain your answer.
Compare average kinetic energy for the air molecules and lemonade molecules when the student first places the lemonade outdoors. Explain your answer.
Explain how and why the water droplets form on the outside of the glass.
Answer:
ye but sdfajkd tryng to play me
Explanation:
Answer:
Vapor is released out of the lemonade because when you place it in a hot it will increase.
Explanation:
In an exothermic the change in enthalpy is usually
Positive, because the potential energy of the reactants is higher than the potential energy of the products
Neutral, because the potential energy of the products and reactants cancel each other out.
Negative, because the potential energy of the reactants is higher than the potential energy of the products
Positive, because the potential energy of the reactants is lower than the potential energy of the products
Answer:
Negative, because the potential energy of the reactants is higher than the potential energy of the products
Explanation:
Exothermic reaction is a reaction in which heat is released to surrounding. This is due to the fact that the heat content of the reactant is higher than the heat content of product thus producing a negative enthalpy change (ΔH) i.e
Enthalpy change = Heat of product – Heat of reactant
ΔH = Hp – Hr = negative
Considering the options given in the question above, the correct answer is:
Negative, because the potential energy of the reactants is higher than the potential energy of the products
PLEASE HELP ME OUT. I AM REALLY LOST AND I JUST NEED THIS LAST QUESTION I WILL BE GRATEFUL AND WILL GIVE BRANLIEST!
PLEASE HELP ME OUT. I AM REALLY LOST AND I JUST NEED THIS LAST QUESTION I WILL BE GRATEFUL AND WILL GIVE BRANLIEST!
Explanation:
—COOH and —NH₂
Carboxylic Acid and Amino group
-TheUnknownScientist
Mr. Whiteman has two stock solutions of sulfuric acid (H2SO4) in the supply closet: 12.1 M and 6.0 M. If he wants to make 10.0 mL of a 1.0 M solution, which stock solution makes more sense to use? Justify with two calculations.
Answer:
12.1-M requires less volume of stock solution.
Explanation:
Hello there!
In this case, according to the foundations of dilution processes, it turns out convenient to remember that the moles of the solute before and after the dilution remains the same; for that reason we use the following equation:
[tex]M_1V_1=M_2V_2[/tex]
Relating the initial and final molarities and volumes. Now, it is seen that V2 is 10.0 mL and M2 is 1.0 M, which means that if we solve for V1 for 12.1 M and 6.0 M, we obtain the following volumes:
[tex]V_1=\frac{M_2V_2}{M_1} \\\\V_1^{12.1M}=\frac{1.0M*10.0 mL}{12.1M}=0.826mL\\\\V_1^{6.0M}=\frac{1.0M*10.0 mL}{6.0M}=1.67mL[/tex]
Therefore, since the 12.1-M solution requires less volume of stock solution, it makes sense to use this one as the initial solution.
Best regards!
Help me please!
What is the solubility of KNO3 in 100g of water at 60°C?
A.
28 grams/100g of H2O
B.
45 grams/100g of H2O
C.
108 grams/100g of H2O
D.
38 grams/100g of H2O
Answer:
C. 108 grams/100g of H2ORequired number is the vertical coordinate of the intersection point of a line at 60°C with the graph of the KNO₃.
Is NaCl solute or water ?
Calcium carbonate + hydrochloric acid forms copper ___ + water + carbon dioxide
What does it form copper what please help me
Answer:
The answer copper carbonate
Ben wants to test whether the material used to make a disposable cup affects the amount of thermal energy transferred to a person's hand. He investigates by carefully pouring the same volume of 90°C water into a foam cup and into a paper cup.
Which additional step in the investigation will help Ben determine which material reduces thermal energy (heat) transfer to the hand of a person holding the cup?
A.Stir the water in each cup for 10 minutes before measuring its temperature.
B.Measure the outside surface temperature of each cup after 10 minutes.
C.Vary the amount of water held by each cup before measuring its temperature.
Answer:
The answer would be B
Explanation:
C does not make sense and A will not affect anything
Measure the outside surface temperature of each cup after 10 minutes is the additional step in the investigation.
What is Temperature?This is defined as the degree of hotness or coldness of a substance and is measured in Celsius or Kelvin.
Determining which material reduces thermal energy will involve measuring the outside surface temperature of each cup after 10 minutes for the difference.
Read more about Temperature here https://brainly.com/question/24325419
How many grams of H2O is created from 60 grams of O2?
[2 H2 + O2 —> 2 H2O]
Answer:
67.5 gm H2O
Explanation:
2 H2 = 4 gm
O2 = 32 gm
2 H20 = 36 gm
so 32 gm O2 results in 36 gm H20
32/36 = 60/x x = 67.5 gm
Science help due by 11:59 What is gravity like on other planets
compared to Earth?
Explanation:
Mercury 0.377 g
Venus 0.905 g
Earth 1 g (midlatitudes)
Moon 0 .165 7 g (average)
Convert 500.0 mL at 740.0 mm of Hg to its new volume at 780.0 mmHg. 474.4mL
Please help, I'm so confused!!!!
Answer:
[tex]\boxed {\boxed {\sf N_2}}[/tex]
Explanation:
Let's examine this reaction, especially the coefficients.
[tex]N_2+3H_2 \rightarrow 2NH_3[/tex]
First of all, remember that reactants are used to make the product. They are found on the left of the arrow usually. Therefore, N₂ and H₂ are the reactants, while NH₃ is the product. We can automatically eliminate NH₃ from our answer choices, because it is simply not a reactant.
Next, look at the coefficients.
N₂ has no coefficient, so a 1 is implied. H₂ has a coefficient of 3.Therefore, for the reaction to work, there must be 1 mole of N₂ and 3 moles of H₂.
We have 3.2 moles of N₂ and 5.4 moles of H₂.
Divide each amount given by the required amount for completion.
3.2 mol N₂/ 1 mol N₂= 3.2 times 5.4 mol H₂/ 3 mol H₂=1.8 timesTherefore, there is enough nitrogen to complete the reaction 3.2 times, but only enough hydrogen for 1.8 times. If everything is completely reacted, we will run out of hydrogen and have excess nitrogen.
This sea grass has had the sun shining on it for most of the day. What can the sea grass do because it is in sunlight? What does this mean for the number of energy storage molecules in the sea grass?
The sea grass can
Answer:
I don't really get your question but I think my answer relates to your question :)
Explanation:
Due to the high availability of sunlight, sea grass can get the sufficient light energy to carry photosynthesis and storage of energy.
What is photosynthesis ?Photosynthesis is a biochemical process by which green plants synthesis energy and in the leaves by the aid of light energy. Here, the light energy is converted to chemical energy.
Plants need sunlight for the light reaction of photosynthesis. In the absence of sunlight, they cant synthesis energy and the chlorophyll does not get active. They will grow towards sunlight.
The sea grass are getting sufficient light energy for the synthesis of energy. The energy storage molecules ie. ATP in sea grass will be synthesized in higher rate with the presence of sun shining.
Find more on photosynthesis:
https://brainly.com/question/1388366
#SPJ7