How do you find the p value of -0.24?

When a tank is 1/2 full it contains 45 liters of water, the area of the base is 450 cm², the height of the tank is 200 cm.

Let the height of the tank be 'h' cm. Since the tank is half full, it contains 45 liters of water which is equal to 45,000 cubic cm.

The volume of water in the tank is given by:

Volume of water = (1/2) x (450 cm²) x (h cm)

Since the volume of water is 45,000 cubic cm, we can set up the following equation:

(1/2) x (450 cm²) x (h cm) = 45,000 cubic cm

Simplifying, we get:

225h = 45,000

h = 200 cm

In this case, the area of the base is given in square centimeters, so we must use cubic centimeters for the volume of water. Also, we converted the liters to cubic centimeters by multiplying by 1000 since 1 liter is equal to 1000 cubic centimeters.

To learn more about tank capacity click on,

https://brainly.com/question/27457805

#SPJ1

The ROE (return on equity) for this project if it produces an EBIT (earnings before interest and taxes) of $140,000 is given by A = 15 %

Given data ,

The Return on Equity (ROE) is calculated as the ratio of Net Income to Equity. Net Income is the EBIT (earnings before interest and taxes) minus the taxes, and Equity is the total assets minus the debt.

EBIT = $140,000

Tax rate = 25%

Total assets = $700,000

Debt = 0% (since the project is financed with 100% equity)

Taxes = Tax rate x EBIT

Taxes = 0.25 x $140,000

Taxes = $35,000

And , the net income is

Net Income = EBIT - Taxes

Net Income = $140,000 - $35,000

Net Income = $105,000

Now , the ROE is given by

ROE = (Net Income / Equity) x 100%

ROE = (Net Income / Total assets) x 100%

ROE = ($105,000 / $700,000) x 100%

ROE = 15%

Hence , the ROE is 15 %

To learn more about net taxable income click :

https://brainly.com/question/13399619

#SPJ1

Step-by-step explanation:

5 (4x^8) ^(-1/2)    -   2 x^-3

p ^(1/2)

r ^5/3  

To draw the graph of y = g(-x), we need to replace x with -x in the original function.

If y = g(x) is given by the following graph:

(see attachment labeled "Attachment1")

Then y = g(-x) can be obtained by reflecting the graph of y = g(x) about the y-axis:

(see attachment labeled "Attachment 2")

Therefore, the graph of y = g(-x) is the reflection of the graph of y = g(x) about the y-axis.

I hope this helps you! Mark brainliest if you can :D

If teacher has total "52 cards", and teacher gives each student "1 card" until all 52 cards are distributed, then number of students which got exactly 9 cards are (b) 4 students.

There are 6 students and 52 cards. The teacher gives each student one card until all 52 cards are given out in game. We want to know how many students receive exactly 9 cards.

To solve the problem, we divide the total number of cards (52) by the number of students (6) to find the average number of cards per student.

⇒ 52 cards / 6 students = 8.67 cards per student;

Since we can't give a student a fraction of a card, we need to round down to 8 cards,

If we give each student 8 cards, that will total of 8 cards × 6 students = 48 cards. which leaves 4 cards left over that we can't give out evenly.

This means that four-students will receive 9 cards each and two students will receive 8 cards each.

Therefore, the correct option is (b).

Learn more about Cards here

https://brainly.com/question/18744688

#SPJ1

The given question is incomplete, the complete question is

A teacher gives 6 students some cards to play a game, She has 52 cards in total, The teacher gives each 1 card until all 52 cards are given.

How many students gets exactly 9 cards?

(a) 2

(b) 4

(c) 5

(d) 6.

Answer:

[tex]x^2+y^2 = 2x - 2y}[/tex]

Third answer option

Step-by-step explanation:

We are given the polar equation as
[tex]r = 2(\sin \theta - \cos \theta)[/tex]
and asked to convert it into rectangular form

We have the following equations which relate (r, θ) in polar form to (x, y) in rectangular form

[tex]\cos \theta=\dfrac{x}{r} \rightarrow x=r \cos\theta\\\\\sin \theta=\dfrac{y}{r} \rightarrow y=r \sin \theta\\\\[/tex]

[tex]r^2=x^2+y^2[/tex]

Original polar equation:
[tex]r = 2(\sin \theta - \cos \theta)[/tex]

Expand the right side:
[tex]r = 2\sin \theta - 2\cos \theta[/tex]

Substitute for sinθ and cosθ in terms of x and y
[tex]r & = 2\left(\dfrac{y}{r} - \dfrac{x}{r}\right)\\[/tex]

Multiply both sides by r:

[tex]r^2 = 2(x - y)\\r^2 = 2x - 2y\\[/tex]

Substitute [tex]r^2=x^2+y^2[/tex] on the left side:
[tex]\boxed{x^2+y^2 = 2x - 2y}[/tex]

This would be the third answer opton

In the given triangle ABC,

i. SAS is given

ii. The law of cosine can be used to solve it.

The cosine rule is a mathematical principle that can be applied to determine the unknown length of side, or measure of the internal angle of a none right angled triangle.

The cosine rule states that;

[tex]c^{2}[/tex] = [tex]a^{2}[/tex] + [tex]b^{2}[/tex] - 2abCos C

Considering the given attachment to the question, for a standard labelling of triangle ABC. It can be observed that;

a. The given properties of the triangle are: Side-Angle-Side (SAS)

b. The angle given is an included angle, so that the cosine law is required to solve the triangle.

Therefore, the answer is: SAS, law of cosine

Learn more about the cosine rule at https://brainly.com/question/23720007

#SPJ1

The composite functions are (f · g) (x) = (x + 2)² and (f / g) (x) = 1, whose domains are all real numbers. The value of each function at x = 2 is listed below:

In this problem we must determine and analyze composite functions. Composite functions can be found by combining two simpler functions thanks to operators. There are four operators to make composite functions:

The domain of a function is the set of all possible of x-values.

First, we determine the two composite functions: f(x) = g(x) = x + 2.

Case A:  

(f · g) (x) = (x + 2)²

Case B:

(f / g) (x) = 1

Second, determine the domain for each case:

Case A:

All real numbers.

Case B:

All real numbers.

Third, evaluate each case at x = 2:

Case A:

(f · g) (2) = (2 + 2)² = 4² = 16

Case B:

(f / g) (2) = 1

To learn more on composite functions: https://brainly.com/question/20379727

#SPJ1

The laplace transform is Y(s) = (7 + e^{-s}/s) / (s² - 5s)

The solution y(t) is y(t) = (-e^{5-t} + 2e^{-5} - 6(t-1) + 7u(t-1))/25.

The solution can be expressed as a piecewise-defined function:

y(t) = -e^{5-t}/25 + 2e^{-5}/25 - 6(t-1)/25 + 7/25, t < 1

y(t) = -e^{5-t}/25 + 2e^{-5}/25 - 6(t-1)/25 + 7/25 + (t-1)/25, t ≥ 1

We have,

a.)

To find the Laplace transform of the solution, we first take the Laplace transform of both sides of the differential equation using the initial value theorem, which states that the Laplace transform of the derivative of a function y(t) is sY(s) - y(0):

s²Y(s) - s y(0) - y'(0) - 5(sY(s) - y(0)) = e^{-s}

Simplifying and solving for Y(s), we get:

Y(s) = (7 + e^{-s}/s) / (s² - 5s)

b.)

To obtain the solution y(t), we use partial fraction decomposition to separate Y(s) into two terms:

Y(s) = A/(s-5) + B/s + C/(s-5)^2

Multiplying both sides by the denominator, we get:

7 + e^{-s}/s = A(s-5)² + Bs (s - 5) + C(s)

Setting s = 0, we get:

7 = 25A - 5B + 0C

Setting s = 5, we get:

7 + e^{-5}/5 = 0A + 5B + 5C

Taking the derivative with respect to s and setting s=0, we get:

0 = 10A - B

Solving these equations, we get:

A = -1/25

B = -2/5

C = 6/25

Therefore, the solution y(t) is:

y(t) = (-e^{5-t} + 2e^{-5} - 6(t-1) + 7u(t-1))/25

Where u(t) is the unit step function.

c.)

The solution can be expressed as a piecewise-defined function as follows:

y(t) = -e^{5-t}/25 + 2e^{-5}/25 - 6(t-1)/25 + 7/25, t < 1

y(t) = -e^{5-t}/25 + 2e^{-5}/25 - 6(t-1)/25 + 7/25 + (t-1)/25, t ≥ 1

At t = 1, there is a discontinuity in the first derivative of the solution due to the presence of the delta function in the original differential equation.

This causes a sudden jump in the slope of the graph of the solution.

Thus,

The laplace transform is Y(s) = (7 + e^{-s}/s) / (s² - 5s)

The solution y(t) is y(t) = (-e^{5-t} + 2e^{-5} - 6(t-1) + 7u(t-1))/25.

The solution can be expressed as a piecewise-defined function as:

y(t) = -e^{5-t}/25 + 2e^{-5}/25 - 6(t-1)/25 + 7/25, t < 1

y(t) = -e^{5-t}/25 + 2e^{-5}/25 - 6(t-1)/25 + 7/25 + (t-1)/25, t ≥ 1

Learn mroe about Laplace Transform here:

https://brainly.com/question/31481915

#SPJ1

Without additional information about the model house, it is impossible to accurately describe the surface that Molly does not need to paint. It could be any surface that will not be visible when the model house is displayed, such as the underside of a roof, the back of a wall, or the bottom of a floor.

The surface area of the figure is  174.7 sq. ft.

Consider the bottom rectangular surface of the figure.

The dimensions of the bottom rectangular surface are: length = 10 ft and width = 3 ft

Using the formula for the area of rectangle, the area of bottom surface of the figure would be,

A₁ = length × width

A₁ = 10 × 3

A₁ = 30 sq. ft.

The dimensions of the right rectangular surface are length = 9 ft and width = 3 ft

Using the formula for the area of rectangle, the area of bottom surface of the figure would be,

A₂ = length × width

A₂ = 9 × 3

A₂ = 27 sq. ft.

The dimensions of the left rectangular surface are length = 11 ft and width = 3 ft

Using the formula for the area of rectangle, the area of bottom surface of the figure would be,

A₃ = length × width

A₃ = 11 × 3

A₃ = 33 sq. ft.

There area two parallel triangular suface with dimensions: base = 11 ft and height = 7.7 ft

Using the formula of the area of triangle the surface area of these two triamgular surfaces would be,

A₄ = 2 × 1/2 × base × height

A₄ = base × height

A₄ = 11 × 7.7

A₄ = 84.7 sq. ft.

So, the total surface area of the figure would be,

A = A₁ + A₂ + A₃ + A₄

A = 30 + 27 + 33 + 84.7

A = 174.7 sq. ft.

This is the required surface area of the figure.

Learn more about the surface area here:

brainly.com/question/31663437

#SPJ1

Some questions that can be asked on the Expenditures and Consumptions behaviours and attitudes of polytechnic Students in a questionnaire are:

One must carefully consider the purpose of a questionnaire, as well as the information required before starting to design it. Also crucial are factors such as the target audience, number and type of questions (i.e., multiple-choice or open-ended), and its format (e.g., Likert scale).

The way in which questions are organized plays an important role, such that people can easily comprehend them and respond accurately while finishing the survey as fast as needed. Concludingly, logical sequencing of questions should be ensured for the overall design to make sense from beginning to end.

Find out more on questionnaires at https://brainly.com/question/31121539

#SPJ1

The probability which is selected randomly from a lot of people living alone in the area in the 25-34 age range will be; 0.1487

Since the total digit of individuals living independently in the area = 31.6

The digit of individuals living in the area who fall within the 25 - 34 age range is 4.7

The probability formula will be

P = required outcome / Total possible outcomes

From the information provided above the given data is:

P(range 25 - 34) = 4.7 / 31.6

= 0.1487

Learn more about probability here;

https://brainly.com/question/9326835

#SPJ1

Answer:

Step-by-step explanation: mark me brainliest

The area of the base of the cylinder is 78.54 ft² and height of the cylinder is  6.31 ft.

To find the area of the base of the cylinder, we can use the formula:

A = πr²

Substituting the given value of radius, we get:

A = π(5 ft)²

A = 78.54 ft²

Therefore, the area of the base of the cylinder is 78.54 ft².

b. To find the height of the cylinder, we can use the formula for the volume of a cylinder:

V = πr²h

Substituting the given values of volume and radius, we get:

157.08 ft³ = π(5 ft)²h

Simplifying, we get:

h = 157.08 ft³ / (π(5 ft)²)

h = 6.31 ft

Therefore, the height of the cylinder is approximately 6.31 ft.

To learn more on Three dimensional figure click:

https://brainly.com/question/2400003

#SPJ1

The evaluated speed of P is 54.5 m s¯¹, under the condition that two forces F₁ and F₂ act on a particle P. The force F₁ is given by F₁ = (-i + 2j) N and F₂ acts in the direction of the vector (i + j).

To evaluate the speed of particle P when t = 3 seconds, we can apply the equations of motion formulas to calculate the velocity if the acceleration and initial velocity values are already given.
The formula can be derived :
v = u + at
Here,
v =  final velocity of the particle,
u = initial velocity of the particle,
a = acceleration acting on the particle
t = time taken.
It is known to us that the acceleration of P is (3i + 9j) ms² and at time t = 0, the velocity of P is (31 -22j) m s¯¹. We can evaluate the initial velocity u by taking the magnitude of (31 -22j) that is
√(31² + (-22)²)
= 39.051 m s¯¹.
Now we can staging all values into the formula
v = u + at
v = 39.051 + (3i + 9j) × 3
v = 39.051 + (9i + 27j)
v = (39.051 + 9)i + (27)j
v = 48.051i + 27j
Then, when t = 3 seconds, the speed of particle P is √(48.051² + 27²)
= 54.5 m s¯¹.
To learn more about acceleration
https://brainly.com/question/30595126
#SPJ1

Few families can survive on a single salary is true statement

Many families rely on dual incomes to make ends meet, especially in areas with high living costs.

However, there are still many families that rely on a single salary to support themselves.

While it may be challenging to make ends meet on a single salary, it is still possible for families to survive and even thrive in these circumstances.

To learn more on Salary click:

https://brainly.com/question/14371457

#SPJ1

Answer:

To calculate the height of the large bottle, we can use proportions. We know that the small bottle has a width of 5.5 cm and a height of 10 cm. We also know that the large bottle has a width of 9.9 cm. If we set up a proportion with the widths and heights of the two bottles, we can solve for the height of the large bottle.

5.5 cm / 10 cm = 9.9 cm / h

Multiplying both sides by h, we get:

5.5 cm * h = 10 cm * 9.9 cm

Dividing both sides by 5.5 cm, we get:

h = (10 cm * 9.9 cm) / 5.5 cm

h = 18 cm

Therefore, the height of the large bottle is 18 cm.

Step-by-step explanation:

Answer:

8sin²a + cot²a sin²a = 1 is true.

Step-by-step explanation:

The solution to the system of equations in this problem is given as follows:

(0.6, 2.4).

The system of equations in the context of this problem is defined as follows:

Equaling the two equations, we can obtain the value of x, as follows:

4x = -x + 3

5x = 3

x = 3/5

x = 0.6.

Substituting the value of x into the second equation, we obtain the value of y as follows:

y = -0.6 + 3

y = 2.4.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

Since we can't have a fractional number of lines, Citywide can sign up for a maximum of 1 line and still stay within their budget.

Let's start by calculating the total amount Citywide pays for their telephone costs without the federal excise tax. We can do this by subtracting the 3% tax from the total budget:

$190 / 1.03 = $184.47

The $96 budget plan includes 4,000 minutes, which means that each minute costs:

$96 / 4,000 = $0.024

If Citywide wants to stay within their budget, they need to make sure that the total cost of the lines they sign up for plus the federal excise tax is less than or equal to $190.

Let's represent the number of lines Citywide signs up for as "n". The total cost of the lines plus tax can then be represented as:

n * $96 * 1.03

Setting this expression less than or equal to $190, we get:

n * $96 * 1.03 <= $190

Simplifying, we get:

n <= $190 / ($96 * 1.03)

n <= 1.945

Thus, Citywide can sign up for a maximum of 1 line and still stay within their budget.

For more details regarding budget, visit:

https://brainly.com/question/15683430

#SPJ1

Answer:

Since the disease doubles every 7 days, the number of cases on day 21 will be 2^3 times the number of cases on day 14, which will be 2^2 times the number of cases on day 7, which will be 2^1 times the number of cases on day 1.

Starting with 3 cases on day 1, we can use the formula:

N = 3 * 2^(t/7)

where N is the number of cases after t days.

Plugging in t = 21, we get:

N = 3 * 2^(21/7) = 3 * 2^3 = 24

Therefore, there will be 24 cases by the end of day 21.

Step-by-step explanation:

-1.2, earbud manufacturers can expect the difference in the diameter of earbuds produced from machines X

Given that two machines, X and Y, produce earbuds

Let X represent the diameter of an earbud produced by machine X, and

let Y represent the diameter of an earbud produced by machine Y. X has a mean of 14 mm with a standard deviation of 0.6 mm

Y has a mean of 15.2 mm with a standard deviation of 0.2 mm.

The mean of the difference, D = X - Y, can be calculated as:

mean(D) = mean(X) - mean(Y)

= 14 - 15.2

= -1.2

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ1

Monthly you should deposit approximately $43 to accumulate ​$76,000 in 4 ​years.

Given that,

f = $76,000

r = 4% = 0.04/12 = 0.0033

n = 4×12 = 48

We know that, a = (f×r)/((1+r)ⁿ⁻¹)

a is the annuity.

f is the future amount.

r is the interest rate per time period.

n is the number of time periods.

Here,

a = (76,000 ×0.0033)/((1.0033)⁴⁸⁻¹)

a = 76,000 ×0.0033×0.17132

a = 42.96

a ≈ $43

Therefore, monthly you should deposit approximately $43 to accumulate ​$76,000 in 4 ​years.

Learn more about the annual percentage rate here:

brainly.com/question/10795072.

#SPJ1

Answer:

Step 1: Distributive Property

Step 2: Distributive Property

Step 3: Commutative Property

Step-by-step explanation:

Step 1: This is distributing the (x + 4y + z) into the (x - 7y), so each term in the prior expression is multiplied by (x - 7y). Hence, Distributive Property.

Step 2: This is doing the same thing but to each individual term. The x in the first term is multiplied by each term in the (x - 7y), the 4y in the second term is multiplied by each term in the (x - 7y), and the same for z. Hence, Distributive Property.

Step 3: This is reordering the variables in the terms. For example, 4yx is changed to 4xy, and that is possible because of the Commutative Property. zx is also reordered into a xz and 7zy into a 7yz.

Feel free to ask any more questions. Hope this helps!!!

The area of the given triangle is expressed as: 25.6 in²

We are only given two sides of the triangle and an angle and so we must find the length of the third side to be able to find the area. The length of the third side is gotten from cosine rule to get:

a = √(14.1² + 7.2² - 2(14.1 * 7.2)*cos 30.3)

a = 8.68 in

In order for us to calculate the area of triangle which has 3 sides, we will have to utilize the Heron's Formula.

From the formula, the area of a triangle (A) that has 3 sides a, b, and c is calculated via the formula:

A = √[s(s - a)(s - b)(s - c)]

where:

s denotes the semi-perimeter of the specific triangle given by the formula: s = (a + b + c)/2.

s = (8.68 + 14.1 + 7.2)/2

s = 14.99 in

Thus:

Area = √[14.99(14.99 - 8.68)(14.99 - 14.1)(14.99 - 7.2)]

Area = 25.6 in²

Read more about Area of Triangle at: https://brainly.com/question/17335144

#SPJ1

Answer:

Step-by-step explanation:

A full revolution on a circle/radians is 2[tex]\pi[/tex], so keep adding or subtracting 2[tex]\pi[/tex] til you get a base angle, that's when the sign changes.  Then decide which quadrant your in.

For this one the equivalent of 2[tex]\pi[/tex] is [tex]6\pi /3[/tex]

-29[tex]\pi[/tex]/3 + [tex]6\pi /3[/tex]

= -23[tex]\pi[/tex]/3 + [tex]6\pi /3[/tex]

= -17[tex]\pi[/tex]/3 + [tex]6\pi /3[/tex]

= -11[tex]\pi[/tex]/3 + [tex]6\pi /3[/tex]

= -5[tex]\pi[/tex]/3 + [tex]6\pi /3[/tex]

= 1[tex]\pi[/tex]/3            sign changed it's equavalent to [tex]\pi /3[/tex]  Which is in the first quadrant.   See unit circle.

-5[tex]\pi[/tex]/6 + [tex]12\pi /6[/tex]

=[tex]7\pi /6[/tex]              third quadrant,  i count quadrants by know [tex]\pi[/tex]/6 is 30°, so every 30° line is 1/6 of the unit circle.  when i count 7 of them that's in the 3rd quadrant.  Don't forget to count the axis's

2[tex]\pi[/tex]/3 is in the 2nd quadrant.  Count my pi/3's which is 60°

45[tex]\pi[/tex]/7 - 14[tex]\pi[/tex]/7

= 31[tex]\pi[/tex]/7 - 14[tex]\pi[/tex]/7

=17[tex]\pi[/tex]/7 - 14[tex]\pi[/tex]/7

=3[tex]\pi[/tex]/7 - 14[tex]\pi[/tex]/7

= -11[tex]\pi[/tex]/7      1/7th's is not your typical unit circle angle

This one i think of logically.  this is -1 4pi/7  

1 pi going backwards is 180

keep going backards 4/7 is bigger than 1/2 so it's in the 1st quadrant

Answer:

Step-by-step explanation:

Answer:

where is the question.

send it so I'll answer it

The outputs for industries X and Y will be 31 million and 43.2 million, respectively  supposedly the final demand changes to 20 for X and 30 for Y.

We will  start with industry X.

The final demand for X hade an increment from 14 million to 20 million with  an increase of 6 million, hence the final output of X must also increase by 6 million to make up for demand.

Users    Final    Producers

Demand     X          Y

X          14         7

Y           6        18

Total     20        25

The table tells us that for every additional million of final demand for X, the producers in industry X need to produce 0.5 million of output.

So the new total output for industry X is 28 + 3 = 31 million.

For  industry Y

The same scenario occurred for Industry Y which had final output of 12 in order to meet the demand increment.

So the new total output for industry Y is 36 + 7.2 = 43.2 million.

In conclusion, the outputs for industries X and Y will be 31 million and 43.2 million, respectively, if the final demand changes to 20 for X and 30 for Y.

Learn  more about demand increment at:

https://brainly.com/question/25080102

#SPJ1