Answer:
vgffffgggggvghvxgyfdgubvhumigrrdghg
The number of calories listed on a food label always refers to the number in the entire package
Pressure is often defined as
Answer:
Pressure is often defined as a measure of force applied on an area, or over a unit area.
Explanation:
fluorine is more reactive than chlorine.
Answer:
yes because of fluorine has higher electronegativity
Why is it easier to switch to solar and wind energy as compared to other alternative energy sources? Select all that apply.
A. They are more cost-effective.
B. They require large, easily obtainable parcels of land.
C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Answer:C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Explanation:
Both c and d are correct
It is easier to switch to solar and wind energy as compared to other alternative energy sources because they can be produced easily in areas with geothermal activity and can be used for other purposes while supplying energy.
What is solar energy?Solar energy is any type of energy generated by the sun. Solar energy can be harnessed directly or indirectly for human use.
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution.
Diversifying energy supply and reducing dependence on imported fuels. Creating economic development and jobs in manufacturing, installation, and more.
Hence, options C and D are correct.
Learn more about the solar energy here:
https://brainly.com/question/23611169
#SPJ2
How many electrons must nitrogen gain to become like it’s closest noble gas, Neon?
Answer:
3
Explanation:
Use your periodic table to determine which of the following is a non metal
A.Nitrogen
B. Lithium
C. Sodium
D. Gold
Which of the following is not a natural
way water is stored in the water cycle?
A Stream
B. Pond
C. Iceberg
D. Cup
Answer:
cup...................
What ways is carbon added to the atmosphere
Answer:
One way is through fossil fuels. When people burn fossil fuels it enters the atmosphere as carbon dioxide gas. Another way is through animals. Most animals exhale carbon dioxide as a waste product which gets into the atmosphere.
which toxic gas is released in incomplete combustion?
Answer:
Incomplete combustion produces carbon monoxide (CO), a toxic gas.
Explanation:
Combustion is the rapid chemical reaction of oxygen in the air or direct oxygen, which is defined as oxidizer, with the different elements that make up the fuel (mainly carbon (C) and hydrogen (H)). These chemical reactions release energy producing local increases in temperature, which causes a flow of heat to the outside.
In other words, on the one hand you have the fuel, which is the substance that oxidizes and that you can find in a solid, liquid or gaseous state and which is made up mostly of carbon and hydrogen.
The oxidizer, for its part, is the substance that oxidizes the fuel, and it is generally the oxygen found in the air.
Certain amounts of oxidizer and fuel must come into contact for combustion to occur.
Incomplete combustion occurs when part of the fuel does not fully react. Incomplete combustion produces carbon monoxide (CO), a toxic gas.
How many moles of NaCl are created as a result of decomposing 12 grams of NaClO3? (molar mass of Na=23, Cl=35, O=16)
Answer: 0.113 moles of NaCl are created as a result of decomposing 12 grams of [tex]NaClO_3[/tex].
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} NaClO_3=\frac{12g}{106.5g/mol}=0.113moles[/tex]
The balanced chemical equation for decomposition of [tex]NaClO_3[/tex] is:
[tex]2NaClO_3\rightarrow 2NaCl+3O_2[/tex]
According to stoichiometry :
2 moles of [tex]NaClO_3[/tex] give = 2 moles of [tex]NaCl[/tex]
Thus 0.113 moles of [tex]NaClO_3[/tex] give =[tex]\frac{2}{2}\times 0.113=0.113moles[/tex] of [tex]NaCl[/tex]
Thus 0.113 moles of NaCl are created as a result of decomposing 12 grams of [tex]NaClO_3[/tex].
Based on the number of valence electrons indicated by its location in the periodic table ,which elements behavior would you predict to be closest to that of potassium (k)
Answer:
Na sodium or Rb rubidium
Explanation:
Because Na is present in first group all members of group 1 have 1 electron in valence shell and show similar properties.
26. A Grignard's reagent may be made by
reacting magnesium with which of the
following compound ?
(A)
Methyl amine
(B) Diethyl ether
(C
)
Ethyl iodide
(D)
Ethyl alcohol
You want to determine the concentration of a phosphoric acid (H3PO4) solution using a standardized 0.0995 M NaOH solution. 10.00 mL of the H3PO4 solution needed to be titrated with 22.85 mL of the standardized 0.0995M NaOH solution to reach the equivalence point. What is the concentration of the H3PO4 solution
Answer:
Explanation:
H₃PO₄ + 3NaOH = Na₃PO₄ + 3 H₂O.
1 mole 3 mole
22.85 mL of the standardized 0.0995M NaOH solution will contain
.0995 x .02285 moles of NaOH
= 22.7357 x 10⁻⁴ moles of NaOH
3 moles of NaOH reacts with 1 mole of H₃PO₄
22.7357 x 10⁻⁴ moles of NaOH reacts with 1 x 22.7357 x 10⁻⁴ / 3 mole of H₃PO₄
= 7.5785 x 10⁻⁴ moles of H₃PO₄
7.5785 x 10⁻⁴ moles of H₃PO₄ is contained in 10 mL or 10⁻² L
molarity of H₃PO₄ solution = 7.5785 x 10⁻⁴ / 10⁻²
= 7.58 x 10⁻² M
= .0758 M .
How many ATOMS of OXYGEN are there in the following compound
which soil would be the best for growing plants?
Honestly, its based on your preference but the best recommended one would be loam. I use loam too, and it is really good for growing the plants.
:)
I need help on these questions!
Answer:
See explanation
Explanation:
Given that;
E = hc/λ
h = 6.63 * 10^-34 Js
c = 3 * 10^8 ms-1
λ = ?
E = 3.978 * 10^-19 J
λ = hc/E
λ = 6.63 * 10^-34 * 3 * 10^8 /3.978 * 10^-19
λ = 19.89 * 10^-26/3.978 * 10^-19
λ = 5 * 10^-7 m The colour is green
2. E = hc/λ
E= 6.63 * 10^-34 * 3 * 10^8 /1000 * 10^-9
E = 1.989 * 10^-19 J
But
E = hf
f = E/h
f = 1.989 * 10^-19/6.63 * 10^-34
f = 3 * 10^14 Hz The radiation is infrared
3. E = hc/λ
λ= hc/E
λ= 6.63 * 10^-34 * 3 * 10^8 /2.0 * 10^-14
λ= 995 * 10^-14 m This is gamma radiation
4. E = hc/λ
E=6.63 * 10^-34 * 3 * 10^8 /620 * 10^-9
E = 3.2 * 10^-19 J
5. E = hf
E= 6.63 * 10^-34 * 2 * 10^17
E = 1326 * 10^-19 J
E = hc/λ
λ= hc/E
λ= 6.63 * 10^-34 * 3 * 10^8 /1326 * 10^-19 = 15 * 10^-9
This is ultraviolet radiation
What was the unknown metal?
Answer:
is there a picture or something?
Explanation:
Explanation:
Your question is incomplete please update it.
Explain how you could use displacement reactions to distinguish between
iron and zinc. You may use any solutions
you
choose.
Answer:
A double displacement reaction is a type of reaction in which two reactants exchange ions to form two new compounds. Double displacement reactions typically result in the formation of a product that is a precipitate.
Explanation:
zinc is more reactive than iron because it displace iron from its solution
The data below shows the change in concentration of dinitrogen pentoxide over time, at 330 K, according to the following process.
2N2O5(g) = 4NO2(g) + O2
[N2O5] Time (s)
0.100 0.00
0.066 200.00
0.044 400.00
a) Find the rate of disappearance of N2O5 from t=0 s to t=200s
b) Find the rate of appearance of NO2 from t=0 s to t =200s
Answer: a) [tex]1.7\times 10^{-4}[/tex]
b) [tex]3.4\times 10^{-4}[/tex]
Explanation:
The reaction is :
[tex]2N_2O_5(g)\rightarrow 4NO_2(g)+O_2(g)[/tex]
Rate = Rate of disappearance of [tex]N_2O_5[/tex] = Rate of appearance of [tex]NO_2[/tex]
Rate = [tex]-\frac{d[N_2O_5]}{2dt}[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]
Rate of disappearance of [tex]N_2O_5[/tex] = [tex]\frac{\text {change in concentration}}{time}[/tex] = [tex]\frac{0.100-0.066}{200-0}=1.7\times 10^{-4}[/tex]
a) Rate of disappearance of [tex]N_2O_5[/tex] = [tex]-\frac{d[N_2O_5]}{2dt}[/tex]
Rate of appearance of [tex]NO_2[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]
b) Rate of appearance of [tex]NO_2[/tex] = [tex]\frac{d[NO_2]}{dt}=2\times 1.7\times 10^{-4}}=3.4\times 10^{-4}[/tex]
A) Find the rate of disappearance of [tex]N_2O_5[/tex] from t = 0 s to t = 200s
[tex]Rate = \frac{1}{2}(\frac{-\delta N_2O_5}{\delta t})\\\\Rate = -\frac{1}{2}(\frac{0.066 - 0.100}{200 - 0})\\\\Rate = 8.5*10^{-5}[/tex]
B) Find the rate of appearance of [tex]NO_2[/tex] from t = 0 s to t = 200s
According to rate law,
[tex]\frac{1}{2}(\frac{-\delta N_2O_5}{\delta t}) = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\8.5*10^{-5} = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\\frac{\delta NO_2}{\delta t} = 4 * 8.5*10^{-5}\\\\Rate = 3.4*10^{-4}[/tex]
For more information on rate of disappearance
https://brainly.com/question/20708865?referrer=searchResults
how many 500 mg tablets of acetaminophen would be a lethal dose for a 132 lb adult
Answer:
About 2000 mg so 4 pills
could kill
Explanation:
Can some please help me?
1) Balance the equation Fe2O3 + H2SO4 → Fe2(SO4)3 + H2O.
What is the mole ratio of H2SO4 and H2O in the equation?
1:3
3:2
2:1
3:3
2)Balance the equation Mg + Mn2O3 → MgO + Mn.
What is the mole ratio of Mg and Mn in the equation.
1:1
2:1
3:2
4;2
1. The mole ratio of H2SO4 and H2O in the equation = 3:3
2. The mole ratio of Mg and Mn in the equation = 3:2
Further explanationGiven
Reaction
1. Fe2O3 + H2SO4 → Fe2(SO4)3 + H2O
2. Mg + Mn2O3 → MgO + Mn.
Required
Balanced equation
Solution
1. Fe₂O₃ + H₂SO₄ → Fe₂(SO₄)₃ + H₂O
Give a coefficientaFe₂O₃ + bH₂SO₄ → Fe₂(SO₄)₃ + cH₂O
Make an equationFe, left = 2a, right=2⇒2a=2⇒a=1
S, left=b, right=3⇒b=3
H, left = 2b, right = 2c⇒2b=2c⇒2.3=2c⇒c=3
The equation becomes :
Fe₂O₃ + 3H₂SO₄ → Fe₂(SO₄)₃ + 3H₂O
2. Mg + Mn₂O₃ → MgO + Mn.
Give a coefficientaMg + Mn₂O₃ → bMgO + cMn.
Make an equationMn, left=2, right=c⇒c=2
O₂, left=3, right=b⇒b=3
Mg, left = a, right=b⇒a=b⇒a=3
The equation becomes :
3Mg + Mn₂O₃ → 3MgO + 2Mn.
Copper metal reacts with silver nitrate to produce silver metal and copper (II) nitrate.
the correct equation for this reaction is:
A: Cu + SiN—> Si + Cu2N
B: 2Cu + AgNO3–> Ag +
Cu(NO3)2
C: Cu + 2 AgNO3–> Ag + Cu(NO3)2
D:Cu + AgNO3–> Ag + CuNO3
Answer:
Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
Explanation:
The reactants are:
Copper metal = Cu
Silver nitrate = AgNO₃
The products are:
Silver metal = Ag
Copper (II) nitrate = Cu(NO₃)₂
So, the reaction equation is given as;
Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
This is a single displacement reaction
Compound is a dull white smooth solid which does not conduct electricity.
a. True
b. False
Answer:
a. True.
Explanation:
Hello!
In this case, since dullness and smoothness are characteristic of materials that are not able to conduct the electricity, as they do not provide an appropriate pathway for the electrons to move around because of their amorphous structure, we realize the answer is a. True.
On the contrary, a lustrous and robust solid, is actually able to conduct electricity because it provides the pathway for the electron movements and therefore to conduct electricity.
Best regards!
How do I round 74,000 to have only one significant figure?
Answer:
7x10⁴.
Explanation:
Hello!
In this case, when rounding big number to a representation with less significant figures than it, we need to make sure we remove the spare figures and round up whether the next digit is five or more.
In such a way, for 74,000, we notice that 4 is not enough to round up the 7, that is why the number would contain a 7 only; moreover, to get rid of the thousand places, we need to introduce an exponent in 4 places, which means that the result would be:
7x10⁴.
Best regards!
A mixture is made by combining 1.29 lb of salt and 5.35 lb of water.
What is the percentage of salt (by mass) in this mixture?
Answer:
19.47%
Explanation:
[tex]\frac{1.29}{1.29+5.35}[/tex]
Please recheck, for this answer may not be correct
What is the chemical formula for Sulfuric acid
Answer:
H₂SO₄
have a great day
Answer:
Explanation:
The chemical formula for Sulfuric acid is H₂SO₄
Compound A reacts with Compound B to form only one product, Compound C, and it's known the usual percent yield of C in this reaction is 72.%. Suppose 3.5g of A are reacted with excess Compound B, and 6.5g of Compound C are successfully isolated at the end of the reaction.
A. What was the theoretical vield of C?
B. How much B was consumed by the reaction?
Answer:
A. Theoretical yield of C is 9.03 g
B. Mass of B consumed is 5.53 g
Explanation:
A. Determination of the theoretical yield of C.
Actual yield of C = 6.5 g
Percentage yield of C = 72.%
Theoretical yield of C =?
Percentage yield = Actual yield /Theoretical yield × 100
72% = 6.5 / Theoretical yield
72 / 100 = 6.5 / Theoretical yield
Cross multiply
72 × Theoretical yield = 100 × 6.5
72 × Theoretical yield = 650
Divide both side by 72
Theoretical yield = 650 / 72
Theoretical yield = 9.03 g
Therefore, the theoretical yield of C is 9.03 g
B. Determination of the mass of B consumed.
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
A + B —> C
Mass of A = 3.5 g
Mass of C = 9.03 g
Mass of B =?
A + B = C
3.5 + B = 9.03
Collect like terms
B = 9.03 – 3.5
B = 5.53 g
Thus, the mass of B consumed in the reaction is 5.53 g
Select the correct number of valence electrons, in order, for groups 13-18.
13, 14, 15, 16, 17, 18
5, 6, 4, 3, 8,7
3,4,5,6,7,8
18, 13, 15, 16, 17, 14
Answer:
3,4,5,6,7,8
Explanation:
Groups 13 - 18 are the main group on the periodic table
The group number corresponds the number of valence electrons they contains.
Valence electrons are the number of electrons in the outermost shell of an atom.
So group 13 - 18 corresponds to a valency of 3,4,5,6,7,8.
Groups with a valency of 8 are the noble gases.
If the wavelength of red light is 650 x 10^-9 meters (or 6.50x10^-7m) and the speed of light (c) is 3.00 x 10^8 m/s , what is its frequency in Hz?(1/sec = Hz) , and c = (wavelength x frequency)
Answer:
f = 4.6 × 10¹⁴ Hz
Explanation:
Given data:
Wavelength of light = 6.50x10^-7m
Speed of light = 3.00 x 10^8 m/s
Frequency of light = ?
Solution:
Formula:
Speed of radiation = frequency × wavelength
by putting values,
3×10⁸ m/s = f × 6.50x10^-7m
f = 3×10⁸ m/s / 6.50x10^-7m
f = 0.46 × 10¹⁵ s⁻¹
f = 0.46 × 10¹⁵ Hz
f = 4.6 × 10¹⁴ Hz
Thermal energy is the energy an object has due to the _____ of the particles
Answer: Vibråtory movement.
Explanation: when particles bounce against each other the friction creates thermal energy. Think about what happens when you rub your hands together and they get warmer, that the friction between your hands making thermal energy.