Answer:
increase
Explanation:
Reactions that are initiated by light are called photochemical reactions. The brighter the light, the faster the reaction.
Answer: An increase in temperature typically increases the rate of reaction. An increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision (Figure. 17.5 “Temperature and Reaction Rate”).
Explanation:
NEED HELP ASPA WILL MAKE THE BRAINIEST ANSWER
A student captures 0.50
moles of hydrogen (H2), oxygen (O2), chlorine (Cl2), carbon dioscide (CO2), and carbon monoxide (CO) gas in separate, evacuated flasks.
Arrange the flasks of gases in order of increasing grams of gas.
.H
H
H2
H2
Answer: [tex]H_2[/tex] < [tex]CO[/tex] < [tex]O_2[/tex] < [tex]CO_2[/tex] < [tex]CL_2[/tex]
Explanation:
According to avogadro's law, 1 mole of every substanceweighs equal to its molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
1. Mass of [tex]H_2=moles\times {\text {Molar mass}}=0.50moles\times 2g/mol=1g[/tex]
2. Mass of [tex]O_2=moles\times {\text {Molar mass}}=0.50moles\times 32g/mol=16g[/tex]
3. Mass of [tex]Cl_2=moles\times {\text {Molar mass}}=0.50moles\times 71g/mol=35.5g[/tex]
4. Mass of [tex]CO_2=moles\times {\text {Molar mass}}=0.50moles\times 44g/mol=22g[/tex]
5. Mass of [tex]CO=moles\times {\text {Molar mass}}=0.50moles\times 28g/mol=14g[/tex]
Thus the flasks of gases in order of increasing grams of gas is:
[tex]H_2[/tex] < [tex]CO[/tex] < [tex]O_2[/tex] < [tex]CO_2[/tex] < [tex]CL_2[/tex]
Balance each of the following equations by placing coefficients in front of the formulas as needed MgO(s) Mg(s) + 02(8) ZnCI.(ag)
Is the equation wrong. Such a equation cannot be formed. pls enter the write equation i will help you
How many particles are in 1.43 g of a compound with a molar mass of 233? (No molar mass calculation needed) (show work plz)
Answer:
Explanation:
mol = given mols / molar mass
given mass = 1.43 grams
molar mass = 233
mols = 1.43 / 233 = 0.00614
1 mol contains 6.02 * 10^23 particles
0.00614 moles = x Cross multiply
1*x = 0.00614 * 6.02*10^23
x = 3,68 * 10^21 particles.
Write the complete balanced chemical equation _A+_BC3->_AC2 +_ B
Answer:
Prueba con tus argumentos quienes sufren mas con la violencia?
Answer:
Sure! The complete balanced chemical equation for the reaction you provided is: `2A + BC3 -> AC2 + 3B`.
PLEASE MARK AS BRAINLIEST
How do you negatively affect the ecosystem of the Great Lakes area?
Answer:
Threats to the Great Lakes' ecosystems, include invasive species, climate change, pollution, and habitat destruction. Climate change affects water temperatures, weather patterns, and lake levels. Pollutants from residential, agricultural, and industrial areas reduce water quality.
Explanation:
I hope this helps answer your question
:D
Answer:
Other human activities that have had an impact on the Great Lakes include intentional water level regulation, man-made alterations such as dredging, diversions, and water withdrawals, which have resulted in earlier thawing of the lakes, lower water levels, and, of course, the spread of industrial waste.
Explanation:
Which statement best describes how an electromagnetic motor works?
Electrons are moved through a magnet, creating a circuit. That circuit interacts with a current, moving the
conductor in the orientation of the field
Electrons are moved through a current, creating a circuit. That circuit interacts with a magnet, moving the
conductor in the onentation of the field.
Elections are moved through a circuit, creating a current That current interacts with a magnet, moving the
conductor in the orientation of the field
Electrons are moved through a magnet creating a current. That current interacts with a circuit, moving the
conductor in the onentation of the field
Answer:
electrons are moved through a magnet creating a current. the current instracts with a circuit, moving the conductor in the onentation of the field
Why do not all rock types contain fossils?
Excessive heat and pressure can destroy fossils.
Fossils can only be created in certain places around the world.
Fossils cannot be created near volcanoes.
Fossils are too large to be found in igneous and metamorphic rocks.
Answer:
Igneous rocks form from molten rock, and rarely have fossils in them. Metamorphic rocks have been put under great pressure, heated, squashed or stretched, and fossils do not usually survive these extreme conditions. Generally it is only sedimentary rocks that
Explanation:
Hope it helps, some how.
Your welcome :)
Which element is malleable and ductile?
A. Phosphorus
B. Argon
C. Sodium
D. Chlorine
Can you help me answer all of these I’ll mark brainliest
Answer:
C.) Sodium
Explanation:
Sodium is an "Alkali Metal"
(CH3CH2)2CHCH(CH3)2 Check all that apply. Check all that apply. alkane alkene alkyne cycloalkane cycloalkene cycloalkyne aromatic hydrocarbon
Answer:
Alkane
Explanation:
Alkane is a class of organic compounds that contain only carbon and hydrogen and the carbon atoms are connected to each other by single bonds.
Now, if we look at the molecule whose condensed structural formula is shown in the question, we will notice that the compound can only contain single bonds. That is, the molecule is a saturated hydrocarbon(alkane).
I have drawn out the full structure of the compound to illustrate this point.
how does a decrease in potential energy during a chemical rwaction relate to the temperature of the surroundings
Answer: If the potential energy of the reaction system decreases, then kinetic energy in the surroundings increases and the temperature of the surroundings rises
Explanation:
The decrease in the potential energy results in an increase in the temperature of the system and surroundings.
Mechanical energy has been described as the sum of the kinetic and the potential energy in the system. With the increase in the potential energy, there has been a decrease in the kinetic energy and vice versa.
The decrease in the potential energy results in an increase in the kinetic energy of the system. The kinetic energy has been termed as the energy of performing work. The rise in the kinetic energy results in an increase in the work done in the system and there has been an increase in the temperature of the system.
Thus, the decrease in the potential energy results in an increase in the temperature of the system and surroundings.
For more information about the potential energy, refer to the link:
https://brainly.com/question/21288807
I’m stuck on number 2
Due to changes in the environment, having lighter-colored fur becomes a
survival advantage in a population of wolves.
What is most likely to happen in the next generation?
Answer:
There will be more light-colored wolves.
Explanation:
Evolution is based off the survival of those with the most advantages in the wild. Since their light coat gives them a survival advantage, they will reproduce more.
The representative particle for NaF
Answer:
Na2S, it is the formula unit
Explanation:
The representative particle of CO2 is the molecule, while for Na2S, it is the formula unit
What is the difference between a renewable and non-renewable source of energy? Give 3 examples of each.
Answer:
There are two major categories of energy: renewable and non-renewable.
Non-renewable energy resources are available in limited supplies, usually because they take a long time to replenish. The advantage of these non-renewable resources is that power plants that use them are able to produce more power on demand. The non-renewable energy resources are:
CoalNuclearOilNatural gasRenewable resources, on the other hand, replenish themselves. The five major renewable energy resources are:
SolarWindWater, also called hydroBiomass, or organic material from plants and animalsGeothermal, which is naturally occurring heat from the earthWhile renewable energy resources have the advantage of unlimited supply over the long haul, they are limited in their availability at any given moment.
For example, the sun rises each day, but its ability to generate power is limited when its cloudy. Another disadvantage is that power plant operators can’t crank up renewable energy production when people are consuming more power, such as on a hot day when many people are running air conditioners at the same time.
Kito puts his spoon into a helping of fresh, hot, mashed potatoes as shown in the figure. Which process takes place when the two objects come together
A. The temperature of the spoon increases, but its thermal energy does not change
B. Energy in the form of heat is transferred from the warmer mashed potatoes to the cooler spoon
C. The thermal energy of both the mashed potatoes and the spoon increases as energy in the form of heat is transferred between them
(please answer quickly, I don't want to fail this test due to being stuck on this one)
Answer:
B. is the answer
Explanation:
Energy in form of heat is transferred from the warmer mashed potatoes to the cooler spoon.
Where is the main asteroid belt in the solar system?
Answer:
It's between Jupiter and Mars.
Which two formulas are used to calculate potential and kinetic energy?
Answer:
[tex]\boxed{\bold { \large { \boxed {KE=\frac{1}{2} mv^2 \ , \ PE=mgh}}}}[/tex]
Explanation:
Kinetic energy formula
[tex]\displaystyle KE=\frac{1}{2} mv^2[/tex]
Potential energy formula
[tex]\displaystyle PE=mgh[/tex]
[tex]\displaystyle KE \Rightarrow \sf kinetic \ energy \ (J)[/tex]
[tex]\displaystyle PE \Rightarrow \sf potential \ energy \ (J)[/tex]
[tex]\displaystyle m \Rightarrow \sf mass \ (kg)[/tex]
[tex]\displaystyle v \Rightarrow \sf velocity \ (m/s)[/tex]
[tex]\displaystyle g \Rightarrow \sf acceleration \ of \ gravity\ (m/s^2)[/tex]
[tex]\displaystyle h \Rightarrow \sf height \ (m)[/tex]
How many moles are in 568 grams of Gold?
Which kingdom contains both unicellular and multicellular eukaryotic organisms?
Animalia
Fungi
Plantae
Bacteria
what is is pls
Which of the following is a binary ionic compound?
a Sulfuric acid
b Hydrogen sulfide
с
Sodium fluoride
d None of the above
Answer:
D; none of the above
Explanation:
Binary ionic compounds are composed of one metal and one nonmental.The metals are always the first element whereas the nonmetals are the second element.
Answer: Sodium fluoride
as a rollercoaster goes downhiQuestion 2 options:
kinetic energy is converted into potential energy
potential energy is converted into kinetic energy
electrical energy is converted into potential energy
potential energy is converted into electrical energy
ll
Answer:
b potential hope this is right
Solder is a silver metal used to hold pipes together. When the solder is heated, it melts and acts as a type of metal "glue." Mrs. Hanley heats a piece of solder until it melts between two pipes. What best identifies the point at which a physical change first takes place?
A)when the solder melts
B)when the solder cools down
C)when the solder is a soft metal
D)when the solder becomes solid again
Answer:
A
Explanation:
Please help me fast What is the Molarity of 100g of Vit. C (C6HBO6) with 2.5L of water?
This is IXL pls hurry pls! SOS major
Answer:
the same as
Explanation:
that's what makes the most since to me but i may be wrong
Most of Earth's major earthquakes are caused by
x
seasonal heating and cooling of Earth's surface
B
x
weathering of rock at Earth's surface
C
x
earth's gravitational attraction to the Moon
D
x
faulting of rock in earth's crust
Answer:
d
When the stress on the edge overcomes the friction, there is an earthquake that releases energy in waves that travel through the earth's crust and cause the shaking that we feel.
What is the concentration of sodium ions in 0.185 M Na2CO3?
Answer:
0.370 M
Explanation:
Step 1: Given data
Molar concentration of the sodium carbonate solution: 0.185 M
Step 2: Write the balanced dissociation equation
Sodium carbonate is a strong electrolyte that dissociates according to the following equation.
Na₂CO₃(aq) ⇒ 2 Na⁺(aq) + CO₃²⁻(aq)
Step 3: Calculate the molar concentration of sodium ions
The molar ratio of Na₂CO₃ to Na⁺ is 1:2.
0.185 mol Na₂CO₃/L × 2 mol Na⁺/1 mol Na₂CO₃ = 0.370 mol Na⁺/L
Kinetic energy is energy stored in an object due to its position.
True
Or
False
Answer:
[tex]\boxed {\boxed {\sf False}}[/tex]
Explanation:
Kinetic energy is the energy of movement or energy at work. An example is a ball rolling down a hill.
Potential energy is stored energy due to the position of an object. For example, a ball resting at the top of a hill.
The question incorrectly described potential energy as kinetic energy. Therefore, the answer is false.
ammonia gas occupies a volume of 57.9 L at a pressure of 532.4atm. if the pressure were lowered to 256.8atm,what would the new volume be
Answer:
683838447745 anmmlllkkkkk
when energy transforms, which of the following does it produce?
A. heat
B. light
C. sound
D. motion
motion
Explanation:
it works in our daily life
I need help ASAP pls the last question
Answer:When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed. ... The particles exert more force on the interior volume of the container. This force is called pressure.
Explanation: