Help pls!!!!!!!!!!!!!!!!!!!

The question is incomplete, the complete question is;

Suppose 1.87g of nickel(II) bromide is dissolved in 200.mL of a 52.0mM aqueous solution of potassium carbonate. Calculate the final molarity of nickel(II) cation in the solution. You can assume the volume of the solution doesn't change when the nickel(II) bromide is dissolved in it. Be sure your answer has the correct number of significant digits. The answer is needed in M.

Answer:

0.0428 M

Explanation:

The equation of the reaction is;

NiBr2 + K2CO3 → NiCO3 + 2KBr

Number of moles of NiBr2 = mass/molar mass = 1.87 g/218.53 g/mol =

8.557 *  10^-3 moles

Now, we know that the Ni^2+ comes from the NiBr2. Also, the concentration of Ni^2+ in NiBr2 = concentration of Ni^2+ in NiCO3

So,

Concentration of Ni^2+ = 8.557 *  10^-3 moles/0.2 L = 0.0428 M

Answer:The correct names for the structure are:

--> 1. 1-bromo-3-chlorobenzene.

--> 3. meta-bromochlorobenzene.

--> 6. m-bromochlorobenzene.

Explanation:

Benzene is the simplest member of the aromatic hydrocarbons. It has a ring structure consisting of six carbon and six hydrogen atoms. This equally means that a benzene can have up to six substituents. One of the chemical properties is that benzene and other members of its series undergo substitution reaction whereby one or more of its six hydrogen atoms is replaced by monoatomic reagents.

Disubstituted benzene consists of two substituents which are described based on either numerical locants or specific words for the three possible forms.

The numerical locant method are used the same naming substitutes of other hydrocarbons. From the question, the numerical locant method was derived through using the following steps:

--> the functional group is benzene

--> there are two substituents which includes bromine( written as bromo) and chlorine ( written as chloro)

--> while placing the number, it's done alphabetically ('1-bromo' comes before '3-chloro') in a clockwise manner. This is to give chorine the lowest locant number.

The second naming method for a disubstituted benzene is the the ortho-, meta-, para- (or their singel letter equivalent) nomenclature method. This is only used for benzene structures.

--> ortho or O : this is used when the substituents are close to each other in the benzene ring.

--> meta or (m) : This is used when the substituents are separated by one carbon in the benzene ring.

--> para or (p): This is used when the substituents are across each other in the benzene ring

From the question, the bromine substituent is separated from the chlorine by one carbon atom, therefore it's meta-bromochlorobenzene or m-bromochlorobenzene.

sorry i can only figure out 1 but the answer is

------------------------------------------------------------------

124

hope you do good on your test :D

Answer:

d.

Explanation:

the electricity is why we can hear sounds from the television and see it

The specific heat : c = 0.306 J/g K

Given

Heat = 35.2 J

Mass = 16 g

Temperature difference : 7.2 K =

Required

The specific heat

Solution

Heat can be calculated using the formula:  

Q = mc∆T  

Q = heat, J  

m = mass, g  

c = specific heat, joules / g ° C  

∆T = temperature difference, ° C / K  

Input the value :

c = Q / m.∆T  

c = 35.2 / 16 x 7.2

c = 0.306 J/g K

Answer:

5.13 g of CO₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

C₁₂H₂₂O + 17O₂ —> 12CO₂ + 11H₂O

Next, we shall determine the mass of C₁₂H₂₂O that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:

Molar mass of C₁₂H₂₂O = 182 g/mol.

Mass of C₁₂H₂₂O from the balanced equation = 1 × 182 = 182 g

Molar mass of CO₂ = 12 + (2×16)

= 12 + 32

= 44 g/mol

Mass of CO₂ from the balanced equation = 12 × 44 = 528 g

SUMMARY:

From the balanced equation above,

182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.

Finally, we shall determine the mass of CO₂ produced from the reaction. This can be obtained as follow:

From the balanced equation above,

182 g of C₁₂H₂₂O reacted to produce 528 g of CO₂.

Therefore, 1.77 g of C₁₂H₂₂O will react to produce = (1.77 × 528)/182 = 5.13 g of CO₂.

Thus, 5.13 g of CO₂ were obtained from the reaction.

Answer: FeF3      Iron(III) fluoride

Explanation: 5.6 g = 1/10 mole Fe

11.3-5.6g F = 5.7 = 3/10 mole F

Answer:

3rd law

Explanation:

His third laws states that every action has an equal and opposite reaction. because you are putting force on your wall, the wall is giving the force of wall on your finger.

Answer:

Help with what?

Answer:

Krypton

Explanation:

Answer:

B

Explanation:

B is a personal factor of resilience

Answer:

an aquifer is a renewable resource

Explanation:

Aquifers are defined as the groundwater found deep in the layers of rocks.

An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.

Some of the deep aquifers are considered as  nonrenewable resource because it toll hundreds of years to accumulate.

Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.

Answer:

50g

Explanation:

At the end of the burning process, the mass of the jar and smoke should be 50g after the candle burning is done.

In most systems, the law of conservation of matter finds expression. According to this law "matter is neither created nor destroyed but atoms are rearranged".

In this kind of system, no matter is allowed to escaped and the starting mass of the reactants compared to that of the product will be the same.

Answer:

The answer is True.

Explanation:

The food has 23629.64 cal

Given

mass = 1000 g of water

temperature increases 23.65 * C

Required

The energy of the food

Solution

Heat absorbed by water :

Q = m . c . Δt

Q = 1000 g x 4.184 J/g°C x 23.65 °C

Q = 98951.6 J

1 Joules = 0.2388 Calories

98951.6 J = 23629.64 cal

Answer: Decrease in size

Explanation:

Electronegativity is defined as the property of an element to attract a shared pair of electron towards itself.

On moving across a period from left to right,   the size of an atom decreases because the electrons get added to the same shell and the nuclear charge keeps on increasing. Thus the electrons get more tightly held by the nucleus.

As, the size of an element decreases, the valence electrons come near to the nucleus. So, the attraction between the nucleus and the shared pair of electrons increases. Thus electronegativity increases.

Answer:

Theres no drawing

Explanation:

Show drawing

Skeletal structural diagram and bond-line drawing are similar;

Parts of the question appear missing: The number of hydrogen atoms in the attached example bond-line drawing is 6 hydrogen atoms

The reason the above value is arrived at for the attached example bond-line diagram is as follows;

A bond-line drawing is the diagram showing the molecular structure of a compound, such that covalent bonds within the molecule are represented by lines with the number of lines indicating the number of covalent bonds.

A single covalent bond is represented by one line, double bonds by two lines while three parallel lines represents a triple bond.

In bond-line drawing, the lines symbolically infer the carbon to carbon bonds while the bonds to the hydrogen atoms are implied noting that each carbon has four covalent bonds. Hydrogen atoms attached to other heteroatoms are indicated with an H.

The number of hydrogen shown in the example diagram can be found by noting that the number of covalent bonds between the carbon atoms are three, therefore, the atom of the fourth bond not shown with a line is to a hydrogen atom

There are six such carbon atoms, one of which is attached to an oxygen atom, which gives five hydrogen atoms located on the ring

There is one more hydrogen atom attached to the oxygen in the hydroxyl group, the total number of hydrogen is therefore;

5 hydrogen on ring + One hydrogen in the hydroxyl group = 6 hydrogen atoms

Learn more about bond-line drawing here:

https://brainly.com/question/13265901

Answer:

1.57 × 10^-4

one point five seven times ten to the power of negative four

Answer:

Physical science, in turn, can be divided into chemistry and physics. Chemistry is the study of matter and energy at the scale of atoms and molecules. ... Physics is the study of matter and energy at all scales—from the tiniest particles of matter to the entire universe but i dont really know if there is new information to discover

Explanation:

hope it help and if it doesnt sorry ;)

Answer:

1. aa

2. They have similar DNA

Explanation:

1. According to the question 1, wrinkled seeds (A) are dominant over round seeds (a) in pea plants. This means that, based on the law of dominance proposed by Mendel, wrinkled seeds will be expressed over round seeds in a heterozygous state (Aa).

However, since the round seed phenotype is a recessive trait, it will only be expressed when the alleles for round seeds (a) are the same in the gene i.e. aa genotype.

2. Based on the information in question 2, Ricky, who is working on a family tree for his school project, realizes that his close relatives all look similar in the pictures he collected. This is possible because of the SIMILARITY OF THEIR DNA (genetic material). Note that, relatives are connected by the genes that are inherited from one another, hence, they possess a similar DNA, which is the most valid reason for the resemblance.

Answer:

See explanation and image attached

Explanation:

The  Gilman reagent is a lithium and copper (diorganocopper) reagent with a general formula R2CuLi.  R is an alkyl or aryl group.

They are useful in the synthesis of alkanes because they react with organic halides to replace the halide group with an R group.

In this particular instance, we intend to synthesize propylcyclohexane. The structure of the  lithium diorganocopper (Gilman) reagent required is shown in the image attached to this answer.

Answer:

No. of moles = 0.0685

Explanation:

Given mass, m = 15.5g

We need to find the number of moles in 15.5 g of CaSO₄.5H2O

First, we find the mass of CaSO₄.5H2O.

M = (1×40)+(1×32)+(4×16)+(5×18)

M = 226 g/mol

We know that,

Number of moles = given mass/molar mass

[tex]n=\dfrac{15.5\ g}{226\ g/mol}\\\\n=0.0685\ \text{mol}[/tex]

Hence, there are 0.0685 moles in 15.5 g of CaSO₄.5H2O.

Answer:

0.2mol/dm³

Explanation:

Given parameters:

Mass of Na₂CO₃   = 10.6g

Volume of solution  = 500mL

Unknown:

Molarity of solution  = ?

Solution:

The molarity of a solution can be determined using the expression below:

 Molarity = [tex]\frac{number of moles }{volume}[/tex]  

     Number of moles  = [tex]\frac{mass}{molar mass}[/tex]  

Molar mass of Na₂CO₃ = 2(23) + 12 + 3(16)  = 106g/mol

   Number of moles  = [tex]\frac{10.6}{106}[/tex]   = 0.1mol

   Convert mL to dm³;

        500mL will give 500 x 10⁻³dm³or 0.5dm³  

So;

Molarity  = [tex]\frac{0.1}{0.5}[/tex]    = 0.2mol/dm³

Answer:

this will copper this is correct answer

Question asked: David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?

Answer: Copper

Explanation: Copper would be the right answer because that's the only material that would conduct electricity.

--------------------------------------------------------------------------------------------

I hope this helps!

Answer:

1.sodium chloride

Explanation:

because the others dont have all the listed properties

Ionic compounds have a high boiling point and be a solid at STP.

Ionic compounds are those compounds which are formed due to high electrostatic attraction between cations and anions.

Ionic compounds are generally present in the solid state because of the presence of strong ionic bond. And due to this rigid structure boiling point of ionic compounds are very high as they want more energy to break their bonds.

Therefor, at standard temperature pressure (STP) ionic compounds will likely have a high boiling point and be a solid at STP.

To learn more about ionic compounds, visit below link:

https://brainly.com/question/11638999

Explanation:

Moreover, increasing use of fossil fuels also causes serious environmental problems. Hence, there is a pressing need to use renewable energy sources like solar energy, wind, tide, biomass and energy from waste material. (i) it reduces the dependence on fossil fuels for energy. (ii) they donot produces pollution.