Answer: A typical illustration of an iterative process is schooling. Every time a student takes a class, they go through another iteration process. Trial and error are used by students when they are studying because it enables them to identify the learning strategies that are most effective for them. The process of experimenting with various methods and evaluating the outcomes in terms of the grade's students earn leads to the discovery of effective study techniques. Students can use this technique to advance toward graduation while learning about how they learn.
Explanation:
What is the term for the process of giving computers instructions about what they should do next? (1 point)
A. Programming
B. Step-by-step
C. Developing
D. Scheduling
When packets arrive at their destination at different speeds, they sometimes arrive out of order. what does this cause?
a. jitter
b. latency
c. dropped packets
d. error rates
What cause based on the question is a. Jitter. Jitter is the variation in time between arriving data packets, caused by network congestion, or route changes. The longer the data packet is sent, the more jitter will affect the audio and network quality.
Standard jitter measurement in milliseconds (ms). If you receive a jitter higher than 15-20ms, it can increase latency and result in packet loss, causing a decrease in audio quality. Symptoms of jitter include:
Audio is intermittent Call pending or disconnectedStatic, intermittent, or garbled audioIf the test results show the Jitter rating is higher than 15-20ms, there is most likely a problem with the Internet Service Provider (ISP). If the test cannot be plugged directly into the modem, the ISP should be able to run the test. If they run into a jitter problem in the end, they should be able to solve it.
Learn more jitter https://brainly.com/question/13661659?
#SPJ4
What are two problems that can be caused by a large number of arp request and reply messages?
The two problems that can be caused by many ARP requests and reply messages are if switching is slowed down by a lot of ARP request and reply messages, the switch may have to alter its MAC table a lot and the other one is the ARP request will overwhelm the entire subnet because it is transmitted as a broadcast.
What is ARP?Address Resolution Protocol is referred to as ARP. The system must translate an IP address into a MAC address before someone can ping an IP address to their local network. The user will need to use ARP to resolve the address in order to accomplish this.
There are some other problems that can be caused by many ARP request and reply messages are :
Because they focus all the traffic from the associated subnets, switches get overloaded.All nodes on the local network must process each and every ARP request message.ARP reply messages have a huge payload because of the 48-bit MAC address and 32-bit IP address that they include, which could cause the network to become overloaded.To get more information about ARP :
https://brainly.com/question/12975431
#SPJ1
Write a loop that prints each country's population in country_pop. sample output with input: 'china:1365830000,india:1247220000,united states:31
There are many different ways to loop through a list of countries and their populations. One way to do this is with a for loop. For each country in the list, we can print out its population.
Here's an example of how this might look:
for country in country_pop:
print(country + ": " + str(country_pop[country]))
This would print out each country's population, like so:
China: 1365830000
India: 1247220000
United States: 310000000
As we can see, China and India have the two largest populations in the world. The United States, while still populous, is only about a third of the size of China.
There are a number of reasons for these population differences. One is simply historical. China and India have both been around for thousands of years, while the United States is a relatively new country. Another reason is geography. China and India are both large countries with a lot of land, while the United States is smaller and has less land area.
Learn more here:
https://brainly.com/question/19705654
#SPJ4
Data communications and networking can be considered as a global area of study because:_______.
Microsoft office's ________ box enables you to search for help and information about a command or task
Microsoft office's Search box enables you to search for help and information about a command or task.
What is the Microsoft search box?The Windows Search Box is known to be one that functions by helping the user to be able to find files and see information on their device and all of OneDrive, Outlook, and others.
Note that At the top of a person's Microsoft Office apps that is seen on the Windows, a person will be able to find the new Microsoft Search box and this is known to be a powerful tool used for search.
Therefore, Microsoft office's Search box enables you to search for help and information about a command or task.
Learn more about Microsoft office from
https://brainly.com/question/15131211
#SPJ1
A ________ is a small message box that displays when the pointer is placed over a command button.
An enhanced ScreenTips is a small message box that displays when the pointer is placed over a command button.
What are ScreenTips?ScreenTips is known to be a term that connote a small windows that shows any kind of descriptive text if a person place the pointer on a command or on a control.
Note that Enhanced ScreenTips are found to be bigger windows that shows a lot of descriptive text than a ScreenTip.
Therefore, An enhanced ScreenTips is a small message box that displays when the pointer is placed over a command button.
Learn more about ScreenTips from
https://brainly.com/question/26677974
#SPJ1
suzanne’s at 2 inches per week suzanne’s at 1.5 inches per week megan’s at 3 inches per week megan’s at 2.5 inches per week
Based on the above, the plant that grew at a faster rate would be Megan’s at 2.5 inches per week.
What is the growth rate about?The term growth rates is known to be one that is often used to show the annual alterations in a variable.
Note that:
Megan's rate = 12 - 4.5 / 4 -1
= 2.5 inches per week
Suzanne's rate = 11 - 5 / 4-1
= 0.5 inches per week
Based on the above,, the plant that grew at a faster rate would be Megan’s at 2.5 inches per week.
Learn more about growth rate from
https://brainly.com/question/2480938
#SPJ1
Megan and Suzanne each have a plant. They track the growth of their plants for four weeks. Whose plant grew at a faster rate, and what was the rate? Suzanne’s at 2 inches per week Suzanne’s at 1.5 inches per week Megan’s at 3 inches per week Megan’s at 2.5 inches per week
Protection against active attacks (falsification of data and transactions) is known as?
Answer:
Message authentication.
Explanation:
What is the output? void iseven(int num) { int even; if (num == 0) { even = 1; } else { even = 0; } } int main() { iseven(7); cout << even; return 0; }
The outpot based from the code is No output. It is because a compiler error occurs due to unknown variable even.
A compiler is a program that is used to convert code written in natural language processing so that it can be understood by computers. So, the main task of a compiler is to do conversion for the code. There are two types of compilers:
A cross compiler that runs on machine 'A' and generates code for another machine 'B'.Source-to-source compiler, which is a compiler that translates source code written in one programming language into source code in another programming language.Learn more compiler https://brainly.com/question/28232020
#SPJ4
how to move the text in computer
Answer:
to move text selected test click on the cut icon from home tab put the cursor where you want to play the selected text click on paste icon from home tab
You are running a python script and suspect that the script has entered an infinite loop. what key combination can you use to halt the loop?
The key combination that can be used to halt an infinite loop in a python script is: CTRL + c.
What is a looping structure?A looping structure can be defined as a type of function which instructs a computer to repeat specific statements for a certain number of times based on some condition(s).
This ultimately implies that, a computer repeats particular statements for a certain number of times based on some condition(s) in looping structures.
What is a forever loop?A forever loop is sometimes referred to as an infinite loop and it can be defined as a type of loop which comprises a sequence of instructions that are written to run indefinitely, continuously or endlessly, until the simulation is halted (quitted) by an end user.
In Computer technology, the key combination that can be used to halt an infinite loop in a python script is: CTRL + c.
Read more on forever loop here: https://brainly.com/question/26130037
#SPJ1
Select the correct answer.
Which letter will be uppercase in the below sentence?
she will have exams next week.
A.
s in she
B.
h in have
C.
e in exams
D.
w in week
E.
n in next
Answer:D
Explanation:
The default output of a command is displayed on the?
Answer:
It is displayed on the console or screen.
the internet of things (iot) is a world where interconnected, internet-enabled devices or "things" can collect and share blank without human intervention.
The internet of things (iot) is a world where interconnected, internet-enabled devices or "things" can collect and share blank without human intervention is a true statement.
What is Internet of Things explain?The Internet of Things (IoT) is known to be a term that connote a kind of a network that is made up of physical objects which are said to be embedded with things such as sensors, software, as well as other forms of technologies.
They are known to be mad for the purpose of linking as well as exchanging data with other kinds of devices and systems over the use of internet.
Therefore, The internet of things (iot) is a world where interconnected, internet-enabled devices or "things" can collect and share blank without human intervention is a true statement.
Learn more about internet of things from
https://brainly.com/question/19995128
#SPJ1
the internet of things (iot) is a world where interconnected, internet-enabled devices or "things" can collect and share blank without human intervention. True/false
challenge: findwaldo create a function findwaldo that accepts an object and returns the value associated with the key 'waldo'. if the key 'waldo' is not found, the function should return 'where's waldo?'
A function findwaldo that accepts an object and returns the value associated with the key 'waldo'. if the key 'waldo' is not found, the function should return 'where's waldo?'
The Programfunction searchForWaldo(arrayOfNames) {
return containsWaldo(arrayOfNames) ? 'I found waldo!' ? 'I couldn't find waldo...'
}
// Exercise Six
const contains = (arr, needle) => arr.includes(needle);
// Exercise Seven
const contains = (arr, needle) => arr.includes(needle) ? "I found waldo!" : "I couldn't find waldo...";
Read more about programming here:
https://brainly.com/question/23275071
#SPJ1
Each cascading style sheets (css) rule consists of a ________, which is the part of the statement that identifies what to style.
Each cascading style sheets (css) rule consists of a option D) selector, which is the part of the statement that identifies what to style.
What is meant by Cascading Style Sheets?Cascading Style Sheets (CSS) is known to be a term that connote the stylesheet language that is known to be used a lot to tell or show the presentation of a document which is said to be written in HTML or XML.
Note that CSS tells about the way that elements need to be rendered on screen, on paper, and others.
Therefore, Each cascading style sheets (css) rule consists of a option D) selector, which is the part of the statement that identifies what to style.
Learn more about cascading style sheets from
https://brainly.com/question/14122880
#SPJ1
Each Cascading Style Sheets (CSS) rule consists of a _________, which is the part of the statement that identifies what element you wish to style.
A) value
B) link
C) property
D) selector
When a user interface is created in the window editor, the ide automatically generates the ________ needed to display each component in the window.
The ide automatically creates the graphical user interface required to display each component in the window when a user interface is built in the window editor. A system of visual, interactive components for computer software is known as a GUI (graphical user interface).
A graphical user interface presents information-conveying and action-representative items for the user to interact with. The objects change color, size, or visibility when the user interacts with them. In 1981, Alan Kay, Douglas Engelbart, and a handful of other researchers created the graphical user interface for the first time at Xerox PARC.
Learn more about graphical user interface https://brainly.com/question/14758410
#SPJ4
A clogged printer nozzle is a possible disadvantage of using ____. a. a laser printer b. an inkjet printer c. a wi-fi printer
A clogged printer nozzle is a possible disadvantage of using an inkjet printer.
Inkjet printers are relatively light and inexpensive but provide reasonable quality assurance.
In an inkjet printer, the printer nozzle shoots the ink drops onto the print paper, which is discharged by a large electrostatic charge, thermal expansion, or sound waves.
There can be various reasons for the printer nozzle to get blocked including dust, high temperature, and if the temperature is lower than required then it may not be possible for the filament to melt.
On the other hand, laser and wi-fi printers do not require printer nozzles. Ink is not used in a laser printer as they are based on lasers to print paper.
To learn more about inkjet printers, click here:
https://brainly.com/question/8204968
#SPJ4
______ backup providers are companies which provide utility software that creates automated backups to an online account. cloud virtual open source media
Cloud backup providers are companies which provide utility software that creates automated backups to an online account.
What is a cloud?In Computer technology, a cloud can be defined as the elastic leasing of pooled computer resources (physical hardware) through virtualization and over the Internet (online website), so as to enable the storage of files and documents virtually.
The characteristics of cloud computing.In Computer technology, the characteristics of cloud computing include the following:
On-Demand self-service.MultitenancyResource poolingElasticityRead more on cloud computing here: https://brainly.com/question/19057393
#SPJ1
On the data worksheet of your workbook, the quality rating column consists of __________ data.
On the data worksheet of your workbook, the quality rating column consists of option A: categorical data.
What is categorical data?The term Categorical data is known to be a form or a collection of information that is said to be shared divided into groups.
Note that when an organization or a group is trying to get any kind of biodata of its said employees, the outcome of the data is known to be categorical.
Therefore, On the data worksheet of your workbook, the quality rating column consists of option A: categorical data.
Learn more about categorical data from
https://brainly.com/question/20038845
#SPJ1
On the Data worksheet of your workbook, the quality rating column consists of __________ data.
A.
categorical
B.
interval
C.
ratio
D.
ordinal
what are the contents of a .class file in java? a. a c source code program b. bytecodes c. all students in the cscs 212 class d. native machine instructions
The content of a .class file in Java are bytecodes. So, the option (b) is the correct choice of this question.
Bytecodes are the content of a .class file in java. And, .class file created by the java compiler that is based on .Java file. A .class file contains the bytecodes created by the Java compiler. Bytecodes are the binary program code in a .class file that is executable when run by JVM or Java Virtual Machine. Class files are bundled into .JAR files, which are included in the environment variable path for execution.
The class file can be compiled using the Java's javac command.
While the other options are incorrect because:
.Class file contains the bytecode, while .java file contains the source code program While the student in the cscs 212 class and native machine instructions dont relate to the context of the question. And, these are the irrelevant details.You can learn more about java .class file at
https://brainly.com/question/6845355
#SPJ4
Name the piece of hardware found in a tablet computer that is both an input and output device.
Answer:
The screen.
Explanation:
You interact with the tablet via the screen and it displays information.
What is an extra external layer of security for user login?
a. multifactor authentication
b. antivirus
c. firewall
d. vpn2
An additional external layer of security for user login is a. multifactor authentication. Multifactor Authentication (MFA) is a security mechanism that confirms a user's identity for a login or other transaction by requiring multiple ways of authentication from separate categories of credentials.
Multifactor authentication combines two or more separate forms of identification: what the user is, as confirmed by employing biometric verification techniques, what the user owns, such as a security token, and what they know, such as a password. In order to make it more difficult for an unauthorized person to access a target, such as a physical location, computing equipment, network, or database, multi-factor authentication (MFA) aims to build a layered defense.
Learn more about authentication https://brainly.com/question/28398310
#SPJ4
What is the ip address of the router that will receive packets for unknown destination networks?
The Gateway IP address is the router's IP address that will receive packets for unknown destination networks.
Whenever a router receives a packet with an unknown destination network address, it will most likely discard it and send an ICMP echo destination net unreachable.
The packet will not be discarded if your router has a default gateway configured. According to the routing algorithm, it will send the packet to the default gateway.
An unknown destination address means your router doesn't have a default gateway set up. As a result, the packet is discarded. After discarding the packet, your router will send a destination unreachable message.
Learn more about gateway IP address: brainly.com/question/28101710
#SPJ4
to make sure that the html and css for a web page are interpreted the same way by all browsers, you can use
To make sure that the HTML and CSS for a web page are interpreted the same way by all browsers, you can use: both A and B.
What is CSS?CSS is an abbreviation for Cascading Style Sheets and it can be defined as a style sheet programming language that is designed and developed for describing and enhancing the presentation of a webpage (document) that is written in a markup language such as:
XMLHTMLWhat is HTML?HTML is an abbreviation for hypertext markup language and it can be defined as a standard programming language which is used for designing, developing and creating websites or webpages.
In Computer programming, you can use a JavaScript shiv and the normalize.css style sheet to ensure that the HTML and CSS for a webpage are all interpreted the same way by all browsers.
Read more on CSS style here: brainly.com/question/14376154
#SPJ1
Complete Question:
To make sure that the HTML and CSS for a web page are interpreted the same way by all browsers, you can use:
a JavaScript shiv
the normalize.css style sheet
both A and B
neither A or B
The purpose of an operating system is to manage the flow of data between hardware components and allow the user to communicate with the computer. true false
The purpose of an operating system is to manage the flow of data between hardware components and allow the user to communicate with the computer is a true statement.
What is the purpose of operating systems?The purpose of an operating system is known to be one that helps to give a background or a platform where any given system user can be able to work on as well as execute programs in an easier and efficient manner.
Note that an operating system is seen as a piece of software that handles the sharing of computer hardware.
Therefore, The purpose of an operating system is to manage the flow of data between hardware components and allow the user to communicate with the computer is a true statement.
Learn more about operating system from
https://brainly.com/question/22811693
#SPJ1
Write, compile, and test the moviequoteinfo class so that it displays your favorite movie quote, the movie it comes from, the character who said it, and the year of the movie.
The program that writes, compiles, and tests the moviequoteinfo class so that it displays your favorite movie quote, the movie it comes from, the character who said it, and the year of the movie is given below:
The Programpublic class MovieQuoteInfo { //definition of MovieQuoteInfo class
//All the instance variables marked as private
private String quote;
private String saidBy;
private String movieName;
private int year;
public MovieQuoteInfo(String quote, String saidBy, String movieName, int year) { //parameterized constructor
super();
this.quote = quote;
this.saidBy = saidBy;
this.movieName = movieName;
this.year = year;
}
//getters and setters
public String getQuote() {
return quote;
}
public void setQuote(String quote) {
this.quote = quote;
}
public String getSaidBy() {
return saidBy;
}
public void setSaidBy(String saidBy) {
this.saidBy = saidBy;
}
public String getMovieName() {
return movieName;
}
public void setMovieName(String movieName) {
this.movieName = movieName;
}
public int getYear() {
return year;
}
public void setYear(int year) {
this.year = year;
}
//overriden toString() to print the formatted data
public String toString() {
String s = quote+",\n";
s+="said by "+this.saidBy+"\n";
s+="in the movie "+this.movieName+"\n";
s+="in "+this.year+".";
return s;
}
}
Driver.java
public class Driver {
public static void main(String[] args) {
MovieQuoteInfo quote1 = new MovieQuoteInfo("Rosebud", "Charles Foster Kane", "Citizen Kane", 1941);
System.out.println(quote1);
}
}
Read more about programming here:
https://brainly.com/question/23275071
#SPJ1
One way to add a correctly spelled word to the custom dictionary is to click the ____ button in the spelling and grammar dialog box. a. add to dictionary b. custom entry c. new entry d. add to custom
One way to add a correctly spelled word to the custom dictionary is to click the Add to Dictionary button in the spelling and grammar dialog box.
What is a custom dictionary?A Custom Dictionary is known to be a tool that depicts the list of words that can be found inside Microsoft Word that is said to be created by you.
Note that this can be done by placing a word on a given list that a person have made in effect saying to Microsoft Word, so it is seen to be easy to add and delete words.
Therefore, One way to add a correctly spelled word to the custom dictionary is to click the Add to Dictionary button in the spelling and grammar dialog box.
Learn more about custom dictionary from
https://brainly.com/question/14396456
#SPJ1
A programmer is developing software for a social media platform. The programmer is planning to use compression when users send attachments to other users. Which of the following is a true statement about the use of compression?
A. Lossy compression of an image file generally provides a greater reduction in transmission time than lossless compression does.
B. Lossless compression of an image file will generally result in a file that is equal in size to the original file.
C. Sound clips compressed with lossy compression for storage on the platform can be restored to their original quality when they are played.
D. Lossless compression of video files will generally save more space than lossy compression of video files.
A true statement about the use of compression is Lossy compression of an image file generally provides a greater reduction in transmission time than lossless compression does.
What is Compression?This refers to the process of modifying, encoding or converting the bits structure of data to use less space.
Hence, we can see that A true statement about the use of compression is Lossy compression of an image file generally provides a greater reduction in transmission time than lossless compression does.
Read more about data compression here:
https://brainly.com/question/17266589
#SPJ1