Answer:
do we have the volume ?
Explanation:
In this simulation, you will be exploring the relationship between temperature and pressure while keeping volume
constant. Click here to begin. Select the Explore box. Answer the questions as you perform the steps.
1. Raise and push down the pressure pump handle to add gas molecules to the container. The initial temperature is
300 K (27º) and the pressure has a range of 5.4-6.2 atm. Notice the pressure values change as the particles
collide with the wall.
2. Click on the bucket to raise the temperature of the container to approximately 400 K (127°C). What happened to
the pressure?
Approximately what pressure range did you observe?
3. Click on the bucket to reduce the temperature to approximately 200 K (-73°C). What happened to the pressure?
Approximately what pressure did you observe?
4. What gas law mathematically shows the relationships between temperature and pressure?
Answer:
increased, 7.5-8.3 atm; decreased, 3.5-4.3 atm; Gay-Lussac's Law
Explanation:
1. The collision of gas molecules, results in the pressure increases.
2. The pressure of the system with an increase in the temperature has been 7.2-8.2 atm.
3. The pressure of the system with a decrease in the temperature has been 3.6-4.1 atm.
4. The relationship between the molecules has been given by Gay-Lussac's Law.
The relationship between the temperature and pressure has been given in the gaseous molecules with the ideal gas equation.
1. The temperature has been directly proportional to the temperature. Thus, with an increase in pressure, there has been an increase in temperature and vice versa.
With the collision of the gas molecules with the wall, there has been the liberation of the energy that increases the temperature. The increase in temperature mediates the increase in pressure.
Thus, with the collision of gas molecules, the pressure increases.
2. The relationship between the pressure and temperature has been given as:
[tex]\dfrac{P1}{T1}=\dfrac{P2}{T2}[/tex]
The initial temperature [tex]T1=300\;\text K[/tex]
Final temperature [tex]T2=400\;\text K[/tex]
Initial pressure, [tex]P1=5.4-6.2\;\text {atm}[/tex]
Final pressure, [tex]P2[/tex]
Substituting the values for calculating P2 as:
[tex]\rm \dfrac{5.4-6.2\;atm}{300\;K}=\dfrac{P2}{400\;K}\\\\\textit P2 = \dfrac{5.4-6.2\;atm}{300\;K}\;\times\;400\;K\\\\\textit{P}2=7.2-8.2\;atm[/tex]
The pressure of the system with an increase in the temperature has been 7.2-8.2 atm.
3. The pressure with the reduction of temperature has been given by :
[tex]\dfrac{P1}{T1}=\dfrac{P2}{T2}[/tex]
The initial temperature [tex]T1=400\;\text K[/tex]
Final temperature [tex]T2=200\;\text K[/tex]
Initial pressure, [tex]P1=7.2-8.2\;\text {atm}[/tex]
Final pressure, [tex]P2[/tex]
Substituting the values for calculating P2 as:
[tex]\rm \dfrac{7.2-8.2\;atm}{400\;K}=\dfrac{P2}{200\;K}\\\\\textit P2 = \dfrac{7.2-8.2\;atm}{400\;K}\;\times\;200\;K\\\\\textit{P}2=3.6-4.1\;atm[/tex]
The pressure of the system with a decrease in the temperature has been 3.6-4.1 atm.
4. The relationship between the molecules has been given by Gay-Lussac's Law. The law states that pressure has been directly proportional to the absolute temperature of the system.
For more information about pressure of gas molecules, refer to the link:
https://brainly.com/question/15863086
When Silver (Ag) forms a metallic bond with other Silver atoms, what do the valence electrons move into? A. the all go to the same Silver atom B. the bond with the oxygen in the atomsphere C. they escape to free space D. the sea of electrons
Answer:
D. the sea of electrons
Explanation:
Metallic bonds are defined as the bonds formed between two or more metals. Silver atom form metallic bond with other silver atoms.
In metallic bond, the free electrons or valence electrons present in s and p orbitals delocalize. The valence electrons do not move around the atoms or enter the atoms whereas they form a sea of electrons in which they surround the nuclei (positively charged) of the metal ions interacting. The valence electrons are then freely move in the space between the atomic nuclei.
Hence, the correct answer is "D. the sea of electrons".
how many grams of oxygen gas are produced when this sample is heated?
Answer: 2.92%
Explanation:
Part 1. Matching
Place the letter for the correct element category from the list below next to each description.
Part 2. Fill in the blank
Write the word or phrase that best completes each sentence. Choose from the following:
group, period, atomic number, periodic, metal, metalloid, nonmetal, chlorine, magnesium.
1. The elements on the periodic table are arranged in order of increasing _____________________.
2. The arrangement of the elements on the periodic table shows a predictable, repeating, ____________
pattern that allows us to predict chemical properties.
3. The elements Na, Mg, and Cu are each classified as ___________________ elements.
4. When elements are located in the same ______ they exhibit similar chemical and physical properties.
5. The element ________ is an example of an element that is classified as a nonmetal.
Part 3. Classifying
For each electron configuration identify the element and decide which group the element belongs to on the
periodic table. (Hint: Find the total number of electrons for each and refer to page 186 in your Student
Book to determine the element and group number.
Electron configuration Element Group number
1. 1s2
2s22p6.
2. 1s2
2s22p6
3s2.
3. 1s2
2s2
2p6
3s2
3p6
.
4. 1s2
2s2
2p6
3s2
3p6
4s2
.
5. 1s2
2s22p6
3s23p3.
A NATURAL APPROACH TO CHEMISTRY
_______
_______
_______
_______
_______ _______
_______
_______
_______
_______
1. ___ The element sodium (Na) belongs to this group of elements.
2. ___ These elements are not likely to chemically bond with other elements.
3. ___ These elements are located in the center of the periodic table.
4. ___ These elements tend to gain one electron to fill their outer shell and are sometimes colored gases.
5. ___ These elements have two electrons in their highest unfilled energy level.
Answer:
Try asking a friend or teacher
Explanation:
helps better than this site because alot of the answers are different even though they might of had the same test
what happens to the pen?what could have caused the pen's motion?
grade 8 asap
Answer:
One is tension force that acts on the string and the other one is gravitational force that is acting on the pen and is therefore, the one that pulls the pen towards the ground. Therefore, the pen's motion is caused by the unbalanced force acting on the pen.
Which of these would have particles with the highest kinetic energy?
ice
water
water vapor
Answer:
water vapor
Explanation:
because gas molecules moves the fastest
Answer:
water vapor
Explanation:
Liquid water molecules have less freedom to move around. While molecules of water vapour have more freedom to move around as there is larger space between the molecules. Hence, the kinetic energy of water molecules is more as compared to the kinetic energy of liquid water
I NEED HELP WITH THIS ASAP!!!!!!!!!!!!!
Which chemical equation best represents the Law of Conservation of
Mass?
A. H+0 -> H20
B. H2 + 02 --> H20
C. 2H2 + 02 --> 2H,0
D. H2 + 02 --> 2H,02
Answer: The answer is B
Explanation:
What is the first state of matter
Answer:
Plasma
Explanation:
Estimated to be 99.999% of the visible universe, cosmic plasma may be considered to be the first state of matter, that preceded the other states of matter in the history of the evolution of the Universe.
please help its due at 2
Answer:
3. One example of condensation is dew forming on grass or leaves early in the morning when the air is cooled/cooling.
4. This is called freezing. For example, when water turns into ice (a solid) because it freezes.
5. This is called melting. The butter reached its melting point and turned into a liquid.
6. Adding or removing energy causes changes in states of matter. Temperature for example can cause melting and freezing.
7. Water which collects as droplets on a cold surface when humid air is in contact with it.
8. Evaporation/vaporization
9. before- particles are compact
during- particles vibrate
after- the particles move freely
10. condensation because it is going from gas into a liquid
11. Evaporation, I know because when liquid gets heated after a period of time and it reaches its boiling point, it will begin evaporating.
12. When a solid is heated the particles gain energy and start to vibrate faster and faster. ... Although the particles are still loosely connected they are able to move around. At this point the solid is melting to form a liquid. The particles in the liquid are the same as in the solid but they have more energy.
13. Sublimation is the process of transformation directly from the solid phase to the gaseous phase, without passing through an intermediate liquid phase.
14. freezing because particles are becoming compact and getting slower because of decrease in temperature
15. Examples are mothballs, dry ice, snow in the winter months, freeze-drying (ice crystals in a frozen food bag), air fresheners, and printers that print out high-resolution images.
16. Try and think of it in terms of the molecules. The temperature is such that the molecules are all bound together into a solid. Occasionally a surface molecule picks up enough energy to break it bond,.. a statistical probability ,and drifts away. The overall temperature of the solid is reduced by that event,as temperature is just an average of the energy. A little more heat flows into the material ,from the ambient environment, and another molecule escapes, and so the process continues….. if the concentration of the molecules in the vapour space above the solid, is low the reverse process of molecules condensing onto the surface,and releasing energy back into the solid is low.
Explanation:
sorry it took a little bit, it wouldnt let me copy and paste what i had typed /:
calculate the atomic mass of carbon if the two common isotopes of carbon have masses of 12.000 amu (98.89% abundance) and 13.003 amu (1.11% abundance)
12.01 amu
Work:
(12.000 × .9889) + (13.003 × .0111) = 12.01
turn the precents into decimals7. Electrons that are free to move in a metal are referred to as ________ electrons.
A.magnetic
B.valence
C.electrostatic
D.cation
Answer:
D; Cation
They are the valence electrons that can move between two metal molecules.
Find the area of a rectangle with a length of 10cm and a width of 7cm.
A.70cm
B.17 cm
C.17cm2
D.70cm2
Answer:
D
Explanation:
You would do 10*7 witch would be 70 then cm2 so the answer is 70cm2
Help please I’ll make you as brainlister 3
Answer:
It doesn't look like any of them but the best answer is SI
Explanation:
Liquids will boil at a higher temperature when they are at a lower elevation true or false ?
(PLS HELP will mark brainliest!) Compare and contrast the alkali metals and the alkaline earth metals. Discuss their physical and chemical properties, their magnetic properties, and their electron configurations.
Answer:
I have a picture from my excerpt that basically answers all of that!
Hope it helps!
Explanation:
The attachment
The alkali metals and alkaline earth metals has different physical and chemical properties due to difference in their valence electrons.
Comparison of physical and chemical properties of alkali metals and the alkaline earth metals. Alkali Metals Alkaline earth metals·Electronic [Noble gas]ns1 [Noble gas]ns2
configuration
·Reactivity Comparatively more reactive Comparatively less
reactive
·Hardness Soft and can be cut by sharp Comparatively harder
knife
·Valency One valence electron Two valence electron
·Ionic charge +1 +2
To learn more about Alkali Metals and Alkaline earth metals here.
https://brainly.com/question/18722874
#SPJ3
how much electrons are present in MnO4-
Urgent help meee ;(((
Answer:
C
Explanation:
A homologous series is a group of molecules with the same general formula and the same functional group.
Does temperature have the same effect on gases as it does on liquids when it comes to viscosity? Explain.
When the temperature of a liquid (fluid) decreases, its viscosity increases. What happens to this fluid?
As the temperature of a liquid (fluid) increases, its viscosity decreases. What happens to this fluid?
Why does ketchup flow faster when heated?
Answer: Explanation:
With an increase in temperature, there is typically an increase in the molecular interchange as molecules move faster in higher temperatures. The gas viscosity will increase with temperature. ... With high temperatures, viscosity increases in gases and decreases in liquids, the drag force will do the same.
The increase in temperature causes the kinetic or thermal energy to increase and the molecules become more mobile. The attractive binding energy is reduced and therefore the viscosity is reduced.
liquids show a reduction in viscosity with increasing temperature. With high temperatures, viscosity increases in gases and decreases in liquids, the drag force will do the same.
An atom is neutral. Its nucleus contains two protons and two neutrons. How
many electrons does the atom have?
Answer: zero
Explanation:
its zero because when something is neutral is not on either team because with numbers there is positive numbers and negative numbers but zero isn't positive or negative so its neutral. ps: can I get branliest
What would pressure be if volume was 0
Answer:
The lower the temperature, the lower the pressure inside of the sphere. If the exact values were plotted out, a linear relationship would be apparent. Extrapolating this line to the point where there would be no pressure yields absolute zero, which is about -273.15 degrees Celsius.
Explanation:
What is formed when a sodium atom and chlorine atom react chemically ?
Answer:
NaCl
Explanation:
NaCl is common table salt
Reacts together due to Na having a 1+ charge and Cl having a 1- charge
they bond together because their charges neutralize
Answer:
A neutron
Explanation:
WENOMECHAINSAMA TUMAJARBISAUN WIFENLOOOF ESELIFTERBRAUN
jk
its because they neutralize each other because one has a positive charge and one has a negative charge.
Which particle changes to create an isotope of an atom?
A.proton
B.neutron
C.electron
Answer:
A
Explanation:
proton
how many particles are in 100ml
Answer:
▬▬▬.◙.▬▬▬
═▂▄▄▓▄▄▂
◢◤ █▀▀████▄▄▄▄◢◤
█▄ █ █▄ ███▀▀▀▀▀▀▀╬
◥█████◤
╩══╩═
╬═╬
╬═╬
╬═╬ Just dropped down to say
╬═╬ *add text here*(5.555 i think this right)
╬═╬
╬═╬☻/
╬═╬/▌
╬═╬/ \
:
Why does a planet stay in orbit?
Answer:
Gravity
Explanation:
A planet is gravitationally pulled around the sun.
Answer:
beause of gravitys pull and because the atmosphere of the beyond lol also bcs this i hope this helps your welcome boo >3
Explanation:
Newton realized that the reason the planets orbit the Sun is related to why objects fall to Earth when we drop them. The Sun's gravity pulls on the planets, just as Earth's gravity pulls down anything that is not held up by some other force and keeps you and me on the ground.
Which particle changes to create a new element?
A.proton
B.neutron
C.electron
Answer: A
Explanation:
Explain how the mid-ocean ridge supports
the theory of sea floor spreading.
help plzzz:(
describe the relationship between the mass volume and density of material
Answer: For a given mass and volume, how much physical space a material takes up, of an object or substance, the density remains constant at a given temperature and pressure. The equation for this relationship is ρ = m / V in which ρ (rho) is density, m is mass and V is volume, making the density unit kg/m3.
Explanation:
Convert 0.0134 Liter to millimeter
Answer:
13400 millimeters.
Explanation:
Multiply the volume value by 1e+6
If a boulder sits at rest on top of a mountain what conclusion can be made about the forces acting on the
A boulder sits at rest on top of a mountain. What conclusion can be made about the forces acting on the boulder? The forces acting on the boulder are balanced (net force equals zero).
If a boulder sits at rest on the top of the mountain , the forces acting on the boulder are zero as it is in the state of rest.
What is a force?
Force is defined as a cause which is capable of changing the motion of an object. It can cause an object which has mass to change it's velocity. It is also simply a push or a pull . It has both magnitude as well as direction.Hence, it is a vector quantity.
It has SI units of Newton and is represented by'F'.Newton's second law states that force which acts on an object is equal to momentum which changes with time. If mass of object is constant, acceleration is directly proportional to net force acting on an object.
The concepts which related to force are thrust and torque .Thrust increases the velocity of an object and torque produces change in rotational speed of an object.
Learn more about force,here:
https://brainly.com/question/1675020
#SPJ2
Which of the following is NOT an example of a homogeneous mixture? a oxygen b tea c water d pizza