Answers
Answer:either 20.38 or 21.38
Explanation:
i clicked on 10.38 and it was wrong, i also clicked on 22.38 and it was wrong lol
Answer: 21.38 mL
Explanation: i just answered it on ck-12
Related Questions
A 20 g granite boulder absorbs 300.2 Joules of energy from the Sun, resulting in its temperature
changing. Calculate this temperature change
Answers
Answer:
19 °C
Explanation:
Step 1: Given and required data
Mass of granite (m): 20 gHeat absorbed (Q): 300. 2 JSpecific heat capacity of granite (c): 0.790 J/g.°CStep 2: Calculate the temperature change (ΔT)
We will use the following expression.
Q = c × m × ΔT
ΔT = Q/c × m
ΔT = 300.2 J/(0.790 J/g.°C) × 20 g = 19 °C
- Rachel performed an investigation to study the thermal conductivity of four different materials. She started with four identically shaped rods—each made of a different material. Then, she placed one end of each rod into a pot of boiling water, which was at 100°C.
- After five minutes, Rachel measured the temperatures of the ends of the rods that were sticking up out of the pot to see whether they got hot. Her results are shown below.
Thermal Conductivity Investigation
Material Temperature of End of Rod After 5 Minutes
Material 1 41°C
Material 2 53°C
Material 3 98°C
Material 4 59°C
- Rachel knows that one of the materials is copper and that copper conducts thermal energy very well. Which of the materials is most likely copper?
A.
material 1
B.
material 3
C.
material 4
D.
material 2
Answers
Answer:
I will have the maths book
Answer:98
Explanation:
which of the following human activities are not related to an increase in global temperature
Answers
Name the following alkene:
CH3C = CH2
1
CH3
A. 2-methyl-1-propene
B. 2-methyl-2-propene
C. 1-propyl-2-methene
D. 2-methyl-1-propane
Pls help
Answers
The name of the given alkene is 2-methyl-1-propene. The correct option is A.
What are alkenes?
Alkenes are inorganic compounds. They are the series of hydrocarbons, that are formed by carbon-carbon double bonds. To find out alkenes, you have to see that the number of hydrogen atoms is always double the number of carbons.
Propene is an unsaturated compound, which is the second-simplest compound, and it contains a single double bond, and it is a colorless gas and has a texture of petroleum jelly.
CH₃C = CH₂
I
CH₃
Here, the three CH₃ are shown in the diagram, so it will be the methyl because it contains 3 CH₂, and now see the propene means one double bond and four carbon atoms. So it will be the 2-methyl-1-propene.
Thus, the correct option is A. 2-methyl-1-propene.
To learn more about alkenes, refer to the link:
https://brainly.com/question/13910028
#SPJ2
A hydrogen fuel cell is an electrochemical reactor in which oxygen and hydrogen gas are reacted to produce energy. Rather than combusting hydrogen in the presence of oxygen, the overall reaction (1/2) O2 H2 → H2O is actually carried out as two `half-reactions’ occurring at separate electrodes. To complete the reaction, this forces electrons to pass through an external circuit from one electrode to the other, and this current can be used to do work; e.g., by driving a motor. Typical operating conditions for a solid-oxide fuel cell are 500-900 C and 5-15 bar. Consider a fuel cell in which a pure oxygen stream and a pure hydrogen stream enter at 11 bar and 700 C with stoichiometric flowrates. Assume that these reactants are consumed completely, and that the water generated by the reaction leaves in a third stream at the same T and P. Assume that the fuel cell operates at steady-state with a uniform temperature of 700 C. a) Write simplified first and
Answers
Answer:
(d) Why is the fuel cell in Question (c) described as an alkaline fuel cell? (e) Another type of fuel cell uses methanol instead of hydrogen.
Explanation:
Predict the products for the reaction shown in the picture.
Fe(s) + CuCrO4(aq) —>
Answers
Answer:
After checking many websites as well
I haven't seen any answer for this reaction
While I found answers or other reactions
Therefore I think this reaction cannot occur
Please mark my answer as brainliest if you feel I helped you in any way :)
How many moles of aspirin (C9H8O4) are contained in 3.13 g of aspirin?
Answers
Answer:
The correct answer is - 0.0173888 moles.
Explanation:
Aspirin, C 9 H 8 O 4 , the atomic mass rounded to the nearest whole number, so: c- 12 h- 1 o - 16
now multiply these number by how many of each there are in the formula:
c - 12 x 9 = 108
h - 1 x 8 = 8
0 - 16 x 4 = 64
add these numbers up 108 + 8 + 64 = 180
aspirin has a molar mass of
180.g mol ^− 1 . This means that one mole of aspirin will have a mass of 180 g .
You're dealing with 3.13 g of aspirin, which will be equivalent to
3.13 g /180g
= 0.0173888 moles aspirin
When planning a simple experiment, what does it mean to “test one variable”?
a During the experiment, the scientist keeps the control the same but changes many other elements he or she is testing.
b During the experiment, the scientist has only one element, or variable, that is changed to test the hypothesis.
c The scientist can only use simple language and materials when planning the one variable to be tested.
d The scientist plans and performs just one science experiment a day to test one variable.
Answers
Answer:
I believe the answer is "b". "During the experiment, the scientist has only one element, or variable, that is changed to test the hypothesis."
Explanation:
I remember from last year but I'm not totally sure. Good luck!
The experimental setup has been the design that includes the experimental and the control group. during the experiment, only one variable is changed to test the hypothesis. Thus, option b is correct.
What is experimental design?The experiment design includes the testing of the hypothesis to solve the problem and reach the solution through the analysis of the observations. It has been the setup that includes the test and the control group that involves the dependent, independent, and controlled variables.
Testing one variable in the experimental designs means changing one of the elements of the experience to prove the reliability of the hypothesis. This variable is the factor that alters and affects the other factors of the experiment and leads to a cause and effect.
The result of the effect of the hypothesis proves the testability of the experiment and provides solutions to the research question. This further leads to the formulation of the law and theory.
Therefore, option A. testing one variable involves proving the hypothesis.
Learn more about experimental design, here:
https://brainly.com/question/17280313
#SPJ6
which wet land is known for the large trees in the water known as bottomland hardwoods?
A. Central Texas
B.South Texas
C. East texas