Answer:
If you going to ask a question ask it accurately.
Explanation:
Test populations are studied. Population one is found to obey the differential equation dy1/da=o.2y1 and the population two obeys dy2/da = -0.3y2 , where t is the time in years? Which population is growing and which is declining
Answer:
Population 1 indicates growth while Population 2 indicates a declining population
Explanation:
Here, using the given rate of change of the population, we want to determine which of the two is growing and which is declining
From the rate of change of both, we can determine this. Looking at the differential equation for the first one, we can see that it is of positive value. Looking at the differential equation for the second one. we can see it is of negative value
While a positive change rate indicates growth, a negative change rate will indicate otherwise
Hence, we can conclude that the one with a negative rate change will indicate a declining population
what kind of earthquake related technologies are engineers and scientists working on currently?
Answer:
Technologies such as seismographs, creepmeters, and laser beams are used to detect seismic events.
Explanation:
An object moving at a constant velocity accelerates at a constant rate of 2.5 m/s2 for a distance of 30 m. At the end of the acceleration the object has a velocity of 90 m/s. What was its velocity before accelerating?
Answer:
The initial velocity is 89.16m/s
Attached is the solution
Explanation:
Two resistors are used in an experiment. Resistor 1 had a resistance of 4 ohms and resistor 2 has a resistance of 2 ohms. Which resistor will have the bigger current flowing through it if the potential difference is constant
Answer:
2ohms resistor
Explanation:
According to ohms law
V= IR
V is the potential difference
I is the current
R is the resistance
Since they have the same potential difference, this shows that they are connected in parallel
Let assume V = 20V
For the 4ohms resistor
I = V/R
I = 20/4
I = 5A
For the two ohms resistor
I = V/R
I = 20/2
I = 10A
This shows that the 2ohms resistor will have the bigger current because the smaller the load, the bigger the current and vice versa
Answer:
2
Explanation:
(97-R) Dos cargas puntuales iguales están separadas por una distancia d. A) ¿Es nulo el campo eléctrico total en algún punto? Si es así, ¿cuál es la posición de dicho punto? B) Repita el apartado anterior suponiendo que las cargas fueran de distinto signo.
Answer:
Explanation:
El campo eléctrico provocado por una carga puntal sobre determinado punto viene dado por la ecuación:
E = K * Q /r² en esa ecuación E es el campo eléctrico (un vector), K es una constante K = 1/4*π*ε₀ Q es la carga que origina el campo, y r la distancia entre la carga y el punto donde se quiere determinar el campo. La fuerza de origen eléctrico y el campo eléctrico van en la dirección de la recta de unión entre carga y punto ( es decir según r) y esta fuerza sera repulsiva o de atracción según que la carga que la origina sea positiva o negativa (respectivamente, ya que en la determinación de fuerza y campo, se asume que se coloca una carga de prueba positiva en el punto ).
Siendo así, si dos cargas elécticas son iguales y están separadas una distancia r ; en el punto medio (r/2) los campos producidos por cada una de las cargas serán de la misma magntud.
Carga Q₁ = Carga Q₂ = Q
E₁ = K * Q₁ / (r/2)² y E₂ = K * Q₂/(r/2)²
Y además tendran direcciones totalmente opuestas, por lo que se anularan
En el segundo caso las cargas son iguales en magntud pero de diferentes signos ( una positiva y la otra negativa ). En este caso los campos eléctricos continuaran siendo de la msma magnitud pero dado que la carga positiva repele la carga de muestra (teorica) y la negativa la atrae los dos campos coinciden en su dirección y resultará una campo de magnitud doble. La dirección del campo será en la tendencia de acercarse a la caga negativa, así si la carga negativa está a la derecha la fuerza de origen eléctrico y el campo van hacia la derecha y si la carga negativa está a la izquierda pues esa será la diercción del campo
What does ionic bond mean
Answer:
The acception and donation of elections within two elements is called as ionic bond.MARK ME AS A BRAINLIST AND FOLLOW ME :)What is a heating curve of water?
Answer:
eye
Explanation:
What type of wave did you create when you pushed your arm back and forth?
plz help
Answer: It is a transverse wave ^^
Explanation:
If Bert the Bat travels East at 200 meters in 10 seconds, what is his velocity?
Answer:
20m/s due east
Explanation:
Given parameters:
Displacement eastward = 200m
Time = 10s
Unknown:
Velocity = ?
Solution:
Velocity is the displacement divided by time;
Velocity = [tex]\frac{displacement}{time}[/tex]
Velocity = [tex]\frac{200}{10}[/tex] = 20m/s due east
Have you ever noticed that how much electrical energy is consumed by electrical appliances in your home. Make a chart of all of these appliances with their power in kW and an average use on daily, weekly, and monthly basis. Usually the electrical power is written on most of the appliances or on their packing. Calculate the total consumption of electrical energy in kWh in your home for December, 2020. Find the expected electricity bill for this month, if 1 kWh energy costs Rs 10. Which item consumed most energy during the month
Answer:
A. The expected electricity bill for this month is Rs 18,896.2
B. The item which consumed the most energy during the month is the electric cooker with a total consumption of 1,110Kw/Month
Explanation:
Step 1 - Identify electrical appliances
I only have 8 electrical appliances in my home.
Electric Cooker. Its power rating 3000 Watts (that is 3Kw/h)Refrigerator. Its power rating is 150 Watts (that is 0.15Kw/h)Waterheater. Its power rating is 4000 Watts (that is 4Kw/h)Electric Iron. Its power rating is 1000 Watts (that is 1Kw/h)Led TV. Its power rating is 235 watts (that is 0.235Kw/h)13 Energy-saving Light bulbs at 60 watts which is a total of 780 watts (which is 0.78Kw)Electric Standing Fan. Its power rating is 55 watts (that is 0.055Kw)Washing machine. Its power rating 255 watts (that is 0.255Kw)Step 2 - Assign usage per hour and calculate wattage used /month
The Electric Cooker is used an average of 9 hours/day. This is 270hours/month. Total Kw used per month 3Kw * 270hours = 1,110Kw/MonthThe refrigerator is used 24 hours. That is 0.15Kw *24*30days= 108Kw/MonthThe water heater is used 1 hour every day. That is 4Kw *30days = 120Kw/MonthThe electric Iron is used for 20 Minutes every day.That is 1Kw * 0.34hr *30= 10Kw/MonthThe Led Tv is used for 12hours/day. That is 0.235Kw*12*30=84.6Kw/monthThe bulbs are used for about 18hours/day. That is 0.78kw*18*30= 421.2Kw/monthThe electric standing fan is used for about 18 hours/day. That is 0.055kw*18*30=29.7Kw/monthThe washing machine is used for about 6 hours/week. That is 0.255Kw*4*6=6.12Kw/month
Step 3 - Add up all the Kw used per month and multiply by the cost of 1 Kw
Total Kilowatt Consumed/Month = 1110 +108+120+10+84.6+421.2+29.7+6.12
= 1,889.62Kw/Month
Total cost of energy consumed per month = 1889.62 * Rs 10
= Rs 18,896.2
Cheers!
(b)Suggest with reasons,what must be added to the flask to keep the liquid hot.
____________________________________________________
(a) a thin layer of vacuum is provided between the two walls of flask, to minimise the heat loss by conduction , because for conduction medium (molecules) is required , but now medium is absent .
.(b) the two walls are silvered to minimise the heat loss by radiation , because a shiny surface is a bad absorber and bad emitter of radiation i.e. good reflector of heat , so prevents the heat exchange between content of flask and surrounding .
(c) the lid of flask is provided with a tight cork stopper to minimise the heat loss by convection , so that convection currents cannot go out .
(d) a plastic (or metal) case is provided with a flask , to protect the flask from physical damage
hope it helps! please mark me brainliest
thank you! have a good day ahead
if u follow me, I will follow u back!
Use the equation below to answer questions (14-21). C12H22O11(s) → 12C(s) + 11H2O(g) 14)The left side of the chemical equations is the _______________________. 15)List the coefficients of the reactants ____________________ What type of chemical reaction is this equation? ________________________________ 16)The number 11 is called a ________________ 17)How many atoms in oxygen of the reactants ______________ 18)The right side is called the ________________ 20)List the four states of matter: ________________________________________________ 21)What are the number of atoms on the product side?
Answer:
14) Reactant
15) 1 .Precipitation reaction equation
16) The coefficient
17) 6.6242 × 10²⁴ atoms of oxygen
18) The product
20) The four states of matter are;
a) Solids
b) Liquids
3) Gas
4) Plasma
21) The total number of atoms in the product is 2.7099 × 10²⁵ atoms.
Explanation:
14) The left side of the chemical equation is the reactant
15) The coefficient is the number in font of the formula, here, the coefficient of the reactant C₁₂H₂₂O₁₁ is 1 .This is a precipitation reaction equation
16) The number 11 in front of the formula, H₂O, is called a coefficient
17) On mole of a substance is defined as containing one Avogadro's number, [tex]N_A[/tex] of molecules
[tex]N_A[/tex] ≈ 6.022 × 10²³ mol⁻¹
In the reactant, C₁₂H₂₂O₁₁, there are 11 elements of oxygen in one mole of the reactants, which gives 11 × 6.022 × 10²³ = 6.6242 × 10²⁴ atoms of oxygen in one mole of the reactants
18) The right side of the chemical equation is called the product
20) The four states of matter are;
a) Solids
b) Liquids
3) Gas
4) Plasma
21) The number of elements on the product side are;
12 Carbon + 22 Hydrogen + 11 Oxygen = 45 Elements total
However, given that there are 12 moles of carbon, we have;
12 × 6.02 × 10²³ = 7.2264 × 10²⁴ atoms of carbon
For hydrogen, we have;
22 × 6.02 × 10²³ = 1.32484 × 10²⁵ atoms of hydrogen
For oxygen, we have;
11 × 6.02 × 10²³ = 6.6242 × 10²⁴ atoms of oxygen
The total number of atoms in the product is 7.2264 × 10²⁴ + 1.32484 × 10²⁵ + 6.6242 × 10²⁴ = 2.7099 × 10²⁵ atoms.
in which diagram 1 or 2 would the person be experiencing summer? explain
Answer:
Diagram 1
Explanation:
In diagram one, the earth is leaning toward the sun, meaning it is summertime.
The person will experience summer in diagram one because the earth is tilted towards the sun.
What is the summer season?From diagram one we can see that earth is tilted towards the sun. During summer, the North Pole of the earth is tilted towards the sun.
As a consequence, the sun’s path is higher in the sky, causing the northern hemisphere to receive more light and heat.
In addition, because the sun is in the sky for more hours, the summer solstice is also the longest day of the year.
These extra hours of sunlight give the sun more time to heat the earth and this is the main reason for summer to be the hottest season.
During summer the sun is perpendicular to the tropic of cancer and heats more areas that lie in the tropic of cancer.
Thus the answer will be diagram 1 because the earth is tilted towards the sun.
To know more about the Summer season follow
https://brainly.com/question/4172420
A 0.016-kg piece of iron absorbs 1086.75 joules of heat energy, and its temperature changes from 25°C to 175°C. Calculate the specific heat capacity of iron. Equation : c = Q/mt * 2608.2 J/(Kg*°C) 3477.6 J/(Kg*°C) 452.8 J/(Kg*°C) 8.7 J/(Kg*°C)
Answer:
452.8125J/Kg°C
Explanation:
The quantity of eat absorbed by the iron is expressed as;
Q = mc∆t
Q = 1086.75 joules
m is the mass= 0.016kg
c is the specific heat capacity
∆t is the change in temperature = 175-25 = 150°C
Get c;
From the formula;
c = Q/m∆t
c = 1086.75/0.016(150)
c =1086.75/2.4
c = 452.8125J/Kg°C
Hence the specific heat capacity of iron is 452.8125J/Kg°C
Picking up a puppy is easy, but picking up a large horse is difficult. *
1st law
2nd law
3rd law
Answer:
1st
Explanation:
It is because the horse is heavier
Please what is the work done by a man who is pulling a box of 45kg of mass by means of rope which makes angle of 45 degrees ?
Answer:
No work is done since no distance is given
Explanation:
Since no distance is given, the force is not doing any work
No work is done by the man since we do not know the distance or displacement.
Work is only said to be done when the force applied on an object moves it through a particular distance.
Work done = Force x distance.
Since no distance is given in this problem, we can as well assume that the force applied is doing no work on the object.
What is the same about a particle as gas, liquid, or solid?
A. The speed at which the particles move.
B. The volume that the substance takes up.
C. The chemical composition.
D. The temperature of the substance.
The thing same about a particle as gas, liquid, or solid is its chemical composition.
What are states of matter?
Matter exists in three different states: solid, liquid, and gas. By examining the configuration of their particles, it is possible to understand why they have various qualities. Theoretically, at this temperature, particles move slowly and have the least amount of energy.
Phase refers to the material's actual state. To pay attention to is the word physical. Only physical means can change the state of matter. You can make a physical change if energy is added (by raising the temperature) or subtracted (by freezing things).
The chemical composition of matter same about a particle as gas, liquid or solid.
To learn more about states of matter refer to the link:
brainly.com/question/9402776
#SPJ5
•1. Identify the four inner/terrestrial planets.
Answer:
1) Mercury
2) Venus
3) Earth
4) Mars
Explanation:
Answer:
The for inner/terrestrial planets are Mercury, Venus, Earth and Mars
Explanation:
~Notify me if you have questions~
Have a nice day and I hope it helps!
^ω^
-- XxFTSxX
Explain how the design of a racing car makes it less likely to turn over.
The principles which allow aircraft to fly are also applicable in car racing. The only difference being the wing or airfoil shape is mounted upside down producing downforce instead of lift. The Bernoulli Effect means that: if a fluid (gas or liquid) flows around an object at different speeds, the slower moving fluid will exert more pressure than the faster moving fluid on the object. The object will then be forced toward the faster moving fluid. The wing of an airplane is shaped so that the air moving over the top of the wing moves faster than the air beneath it. Since the air pressure under the wing is greater than that above the wing, lift is produced. The shape of the Indy car exhibits the same principle. The shape of the chasis is similar to an upside down airfoil. The air moving under the car moves faster than that above it, creating downforce or negative lift on the car. Airfoils or wings are also used in the front and rear of the car in an effort to generate more downforce. Downforce is necessary in maintaining high speeds through the corners and forces the car to the track. Light planes can take off at slower speeds than a ground effects race car can generate on the track. An Indy ground effect race car can reach speeds in excess of 230 mph using downforce. In addition the shape of the underbody (an inverted wing) creates an area of low pressure between the bottom of the car and the racing surface. This sucks the car to road which results in higher cornering speeds.
The total aerodynamic package of the race car is emphasized now more than ever before. Teams that plan on staying competitive use track testing and wind tunnels to develop the most efficient aerodynamic design. The focus of their efforts is on the aerodynamic forces of negative lift or downforce and drag. The relationship between drag and downforce is especially important. Aerodynamic improvements in wings are directed at generating downforce on the race car with a minimum of drag. Downforce is necessary for maintaining speed through the corners. Unwanted drag which accompanies downforce will slow the car. The efficient design of a chassis is based on a downforce/drag compromise. In addition the specific race circuit will place a different demand on the aerodynamic setup of the car.
A road course with low speed corners, requires a car setup with a high downforce package. A high downforce package is necessary to maintain speeds in the corners and to reduce wear on the brakes. This setup includes large front and rear wings. The front wings have additional flaps which are adjustable. The rear wing is made up of three sections that maximize downforce.
The speedway setup looks much different. The front and rear wings are almost flat and are used as stabilizers. The major downforce is found in the shape of the body and underbody. Drag reduction is more critical on the speedway than on other circuits. Since the drag force is proportional to the square of the speed, minimizing drag is a primary concern in the speedway setup. Lap speeds can average over 228 mph and top speeds can exceed 240 mph on a speedway circuit. Effective use of downforce is especially pronounced in highspeed corners. A race car traveling at 200 mph. can generate downforce that is approximately twice its own weight.
Generating the necessary downforce is concentrated in three specific areas of the car. The ongoing challenge for team engineers is to fine tune the airflow around these areas.
why is the index of refraction important for achromatic lenses?
Answer:
Refractive index is a measure of how light propagates through a material. The higher the refractive index the slower the light travels, which causes a correspondingly increased change in the direction of the light within the material.
Explanation:
Someone pls help me with this!
Answer:
F=8.87 N
Explanation:
Coulomb's Law
The electrostatic force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.
Written as a formula:
[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]
Where:
[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]
q1, q2 = the objects' charge in coulomb
d= The distance between the objects in meters
Object 1 has a charge of
[tex]q_1=-2.3\cdot 10^{-6}\ c[/tex]
Object 2 has a charge of
[tex]q_2=-4.2\cdot 10^{-6}\ c[/tex]
They are separated by a distance of
d = 0.099 m
Calculate the force:
[tex]\displaystyle F=9\cdot 10^9\frac{2.3\cdot 10^{-6}*4.2\cdot 10^{-6}}{0.099^2}[/tex]
F=8.87 N
From the poem Black woman what does it mean by Savannah stretching to clear horizons, Savannah shuddering beneath the East wind's eager caresses.
Answer:
From the poem Black woman what does it mean by Savannah stretching to clear horizons, Savannah shuddering beneath the East wind's eager caresses.
Explanation:
please help will give brainlyest
A 55 kg person falling with a velocity of 0.6
Answer:
What are we supposed to find, if it is kinetic energy then this is the solution.
K.E=1/2mv^2
K.E= kinetic energy
M=mass
V=velocity
K.E =0.5*55*0.6^2
K.E=9.9J
Explanation:
The eagles suck, so do the giants and the jets and jaguars are irrelevant
anyone wanna argue
Naw ur pretty accurate, heck collage is the only football worth watching most the time. Hook'um horns!
A car moved 80 km to the south.What is its displacement?
car moved 80 km to the South. What is its displacement? 80 km South -------------------------------------
A ball of mass 0.3kg, moving at a velocity of 20m/s is suddenly hit by a force of 5N for a time of 0.03 sec. Find its new velocity of motion
Answer:
F * t = m * Δv
F * t = m * (v2 - v1) where v2 is the new velocity and v1 is the current velocity
m * (v2 - v1) = (F * t)
Plugging in the values,
0.3kg * v2 - 0.3kg * 20 m/s = 5 * 0.03 s
0.3 * v2 - 6 = 0.15
0.3 * v2 = 0.15 + 6
v2 = 6.15 / 0.3
v2 = 20.5 m/s
The new velocity of motion is 20.5 m/s.
The Periodic Table Question 4 of 10 If an element forms a 2+ ion, in which group of the periodic table would you expect to find it? D A. 2 B. 17 O C. 1 D. 18 7
Answer:
B is the difference قصدي لا انا اعرف بشير بس ما اعرف اخوه يعني *قصدي لا انا اعرف بشير بس ما اعرف اخوه يعني *قصدي لا انا اعرف بشير بس ما اعرف اخوه يعني *قصدي لا انا اعرف بشير بس ما اعرف اخوه يعني *قصدي لا انا اعرف بشير بس ما اعرف اخوه يعني *
Positive feedback caused his pancreas to stop secreting insulin. Negative feedback caused his pancreas to stop secreting insulin. Negative feedback caused his pancreas to produce more insulin. Positive feedback caused his pancreas to produce more insulin.
Answer:
Negative feedback caused his pancreas to produce more insulin.
Explanation:
Positive feedback is a feedback that causes an increase due to change, that is it results in more product while negative feedback is a feedback that causes a decrease due to change, that is it result in lesser product.
Blood sugar control in the body is a negative feedback, because as the blood sugar increases, the nerves sense a change which causes the pancreas to secrete insulin until homeostasis and then the secretion stops.
Match each term with the appropriate definition.
mass
the amount of matter in an object
balance
the downward pull on an object due to
gravity.
weight
a tool used to measure weight
scale
a tool used to measure mass
Answer:
mass- the amount of matter in an object
balance- tool used to measure mass
scale- a tool used to measure weight
weight- the downward pull on an object due to gravity