Given : ABCD is a rectangle
m∠B1DB = 60°, m∠ADB = 45°
DB1=37
Find: Volume

To make this graph the first step is to look at the slope-intercept form

- we see that 2/3 is the slope and -5 is the y-intercept (the point on the y-axis)

So, now you can find the y-intercept on the graph (-5) and make a dot there

Next, move right 3 and up 2 and repeat until you have enough points to make a line :)

graph below- hope this helps :)

Answer:

Step-by-step explanation:

Given that the:

Find the volume of the cuboid!

Volume equation =

W × H × L =

5/8 × 2/3 × 3/4 =

(5×2×3)/(8×3×4) =

30/96 =

The volume = 5/16 cubic centimetres

____________________

#IndonesianPride - kexcvi

Answer:

C. y= 1.5x

Step-by-step explanation:

Everytime multiply the first number 1.5 (y) by the X variables it gives you another Y variable. For example, 1.5 times 2 = 3. 1.5 times 3 = 4.5. And 1.5 times 4 = 6!

Answer:

P-value < 0.005

Step-by-step explanation:

just took it

Answer:

a) 70,663.57< [tex]\overline x[/tex] < 113,680.43

b) The sampling distribution of the means is expected to be approximately normal given that n > 30

Step-by-step explanation:

The given parameter of the study are;

The number of reports in the study, n = 75 reports

The average debt, [tex]\overline x[/tex] = $92,172

The standard deviation, Sₓ = $111,538

a) A one-sample t confidence interval is given as follows;

The Degrees of Freedom, df = n - 1 = 75 - 1 = 74

[tex]C.I, = \overline x \pm t^* \cdot \dfrac{S_x}{\sqrt{n} }[/tex]

[tex]t^*[/tex] = The critical t, at 95% confidence level = 1.67

Therefore, we have;

[tex]C.I, = 92,172 \pm 1.67 \cdot \dfrac{111,538}{\sqrt{75} }[/tex]

Therefore, we have;

[tex]C.I, = 92,172 \pm 1.67 \cdot \dfrac{111,538}{\sqrt{75} }[/tex]

C.I. = (92,172 ± 21,508.43)

Therefore, the 95% one-sample t confidence interval for the average debt of the companies at the time of filing, C.I. = 70,663.57< [tex]\overline x[/tex] < 113,680.43

b) The defense for using the t confidence interval in the question is supported that the fact that the sample size is larger than 30 (n = 75) the sampling distribution of means will be approximately normal and the population mean will be between the confidence interval for the mean.

Answer:

small is 0.018

medium is 0.016

large is 0.010

Answer:

Wrong Anewer, I can't delete my answer so I just edited this in

Answer: try calculating it this is very easy that’s why you just have to times it

ing

Step-by-step explanation:

Answer:

32 people

Step-by-step explanation:     If there are 400 people and there is 8% of that, then first convert 8% to a decimal so its easier to work with. The multiply with 400:

0.08 * 400 = 32

Answer: 32 people have green eyes

Answer:

no, exponents are how many times the base is used, it would be 2x2x2... so on until there are 28 2s

Step-by-step explanation:

Answer: 50 square units

Step-by-step explanation:

Answer:

none of those?

Step-by-step explanation:

4(-2c) = -8c

Answer:    -9c

Step-by-step explanation:

4(-2c) - c

= -8c - c

= -9c  

-9c is the answer

Answer:

if the slope is 0, it is horizontal. and remember, m is the slope. (0)

Step-by-step explanation:

x is 9, y is 5.

slope intercept form is y=mx+b, so you plug in the numbers.

5= 0*9+5

or, 5=5

Answer:

The answer is 3

Step-by-step explanation:

if the other side is 10 then 2x+4 should be 10

2*3+4=10

Answer:

36/81 x 10/50 is 29/45. Since 29 is a prime number and 45 is not divisible by 29, 29/45 would be the simplest form.

Hope this helps! Brainliest?

Answer:

-1

Step-by-step explanation:

I did it in my review

Answer:

Let me know if there is anything you don't get

∠3 = 102 because ∠1 and ∠3 are supplementary and 102 + 78 = 180

∠4 = 102 because ∠1 and ∠4 are consecutive interior angles

∠5 = 78 because ∠1 and ∠5 are corresponding angles

∠6 = 133 because ∠2 and ∠6 are supplementary angles

∠7 = 47 because ∠2 and ∠7 are vertical angles

∠8 = 47 because ∠2 and ∠8 are opposite interior angles

∠9 = 133 because ∠8 and ∠9 are supplementary, and we just saw ∠2=∠8

∠10 = 102 because ∠1 and ∠10 are supplementary

You could have used a whole bunch of different relations, but I wanted to focus on ∠1 and ∠2 since those were told to us

Step-by-step explanation:

For this question you need to know several parts of geometry.  Let me know if anything doesn't make sense.

First, parallel lines are two or more lines which are angles in such a way that no matter how long they are they will not cross.  In other words they are slanted at the same angle.  you can see this with lines a and b in this picture.

Second, a transversal is a line that crosses through two or more parallel lines.  A transversal creates a number of angles that have special properties.  I would like you to look specifically at line c as I describe these angles.  line c is a transversal to Ines a and b.  Also line d is also a transversal.

There are seven special angles to know.

The easiest is supplementary angles.  This you don't need parallel lines, but if any two lines ever cross this creates 4 angles.  you can actually look at where lines c and b intersect in your problem.  Angles 2. 6 and 7 are labeled but there is one more unlabeled one.  Now, 180 degrees is a straight line.  With angles you can see angles 6 and 7 add together to be a straight line.  Similarly 2 and 6 do as well.  These are two sets of supplementary angles.  

To list off the supplementary angles here 9 and 8 are supplementary, as are  2 and 6, 6 and 7, 1 and 3, 1 and 10, and finally 4 and 5.

From supplementary angles comes vertical angles.  Again, if you look at angles 2, 6 and 7 we already know ∠2 + ∠6 = 180 and ∠6 + ∠7 = 180.  Well lets say ∠6 = 133.  Well then, we could use algebra to see that both ∠2 AND ∠7 are 47 degrees.  This is the property of vertical angles.  if you have two lines intersecting, any two angles that have a third in between the are called vertical angles, and are equal.

some examples of vertical angles are ∠2 and ∠7as well as ∠3 and ∠10,  

Finally we go into parallel line specific angles.  If you have two or more parallel lines with a transversal, so in particular look at a and b as the parallel lines and c as the transversal.  The transversal creates some special angles.  in particular, the transversal crosses a and b at the same angle, so angles 8 and 7 have the same value.  These are known as corresponding angles, since they correspond tot he same position with a transversal crossing through parallel lines.  

the corresponding angles in the picture are ∠8 and ∠7, ∠3 and ∠4 and finally ∠1 and ∠5.  the last two using line d as a transversal.

After corresponding angles opposite interior angles I think are the next logically to look at.  Opposite means they are on two different parallel lines and on different sides of the transversal, while interior means they are between the parallel lines.  so if you look at the parallel lines a and b there are angles 8 and 2 that are interior angles.  Since 8 is against line a and 2 is against line b, and ∠8 is above transversal c while ∠2 is below it, they are opposite angles.  so 8 and 2 are opposite interior angles.  Now, if you look at ∠8 and ∠7 you know these are corresponding angles, then ∠7 and ∠2 are vertical angles.  This means opposite interior angles are equal.

A list of opposite interior angles are ∠8 and ∠2, and ∠10 and ∠4.

Alongside opposite interior, there are opposite exterior angles.  opposite means on different parallel Ines and on opposite sides of the transversal, while this time exterior means not between the parallel lines.  Now just like we figured with opposite interior angles

The only labeled pair of opposite exterior angles are ∠9 and ∠6.  Now just like we figured with opposite interior angles, let's start with ∠8 and ∠9, which are supplementary.  then ∠8 and ∠7 are corresponding angles so ∠9 and ∠7 are supplementary.  We can also see ∠7 and ∠6 are supplementary.  well, since ∠9 + ∠7 = 180 = ∠6 + ∠7 then ∠9 = 180 - ∠7 = ∠6 so ∠9 = ∠6.  This shows opposite exterior angles are  equal.

So we did two kinds of opposite angles, it might make sense there are non opposite angles.  And there are.  these are called consecutive angles.  There are consecutive exterior and consecutive interior angles.  An example of each are ∠1 and ∠4 for consecutive interior, consecutive because they are on the same side of the transversal, and interior because they are between the two parallel lines.  ∠3 and ∠5 are consecutive exterior angles.

You can use similar reasoning we have been so far to conclude all consecutive angles are supplementary

Answer:

it is A.2/3

Step-by-step explanation:

Answer:

0

Step-by-step explanation:

100 × 63 × 23 ÷ 20 × 30 × 0 × 5 × 50 × 10

You see the bold " × 0"; this means whatever happened before the " × 0" means nothing. You are left with "× 0 × 5 × 50 × 10". Any number times 0 or 0 times any number = 0. Your answer is 0.

Answer:

No

Yes

No

Yes

(choice 3 is a no)

Answer:

6 days

Step-by-step explanation:

Answer:

6 days

Step-by-step explanation:

1 day=1/2

2 day=1

3 day=1 and 1/2

4 day=2

5 day=2 and 1/2

6 day=3

hope this helps :)

Answer:

caca water

pee water

Step-by-step explanation:

Answer:

$11 is her change

Step-by-step explanation:

This is a simple adding and subtracing problem.

What we first do is add up 4+2+3=9 then we subtract 9 from 20 which gives us $11

We can check our answer by add up 11 + 9 to see if it equals to 20

Answer:

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Step-by-step explanation:

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Answer:

6.4

Step-by-step explanation:

Not a clear question.  Is it 3.5 of this weight or, as it is written, 3 5?  If the first, then the answer is 6.4.  

Answer:

Step-by-step explanation: