Answer:
* Temperature changes
* Changes in the tension
* Errors in the meter marks
Explanation:
When we are using several meters to make a measurement we have several aspects that can cause the readings to differ.
* Temperature changes make the dilation between readings different, at higher temperatures the material of the meter expands and the reading decreases.
* Changes in the tension with which the meter is pulled to keep it straight, in general all materials bend under the action of gravity, so you have to pull them to make them straight, if the forces are different from the material is lengthened decide Young's modulus, inducing different readings
* Errors in the meter marks, especially in the initial part that is covered by a hook, different positions of the hook change the readings.
* Structural problems, such as rust, bends that create changes in the length of the meter material.
How does energy in the form of light photon travel through the many layers of the Sun?
Answer:Particles of light form from atoms undergoing nuclear fusion in the sun's innermost layer known as the core. The light then flows through the sun's interior for millennia, slowly bubbling up like water in a boiling pot. ... The view starts in the core of the sun where atoms fuse together to create light and energy.
Explanation: hope i helped
Light travels through the layers of the sun as particles called photons.
The sun is the principal source of energy in the universe. Energy from the sun is trapped by green plants and used in the process of photosynthesis.
Light travels through the layers of the sun as particles. These particles of light are called photons and they pass through the various layers of the sun.
Learn more about photons: https://brainly.com/question/24309591
What will happen in the next moment for the girl on the swing?
1.Fill in wether quantities will increase, decrease, or stay the same.
2. Support your answer in the table below
Answer:
Increase, same, same
Explanation:
An experiment is designed to test what color of light will activate a photoelectric cell the best. The photocell is set in a circuit that "clicks" in response to current. The faster the current, the more clicks per minute. In this experiment, the number of clicks in one minute is recorded for each color of light shining on the photocell. To change the color of light, a different color of cellophane is placed over the same flashlight and the flashlight is then located a specific distance from the photocell.
Which of the following was not kept constant?
the color of the light after it has passed through the cellophane
the source of the original light
the distance of the light from the photocell
the test for photocell activation
Answer:
the color of the light after it has passed through the cellophane
Explanation:
Since in the given experiment, there is an impact of various colors of light on the cell i.e. photoelectric that should be measured. The photocell should be placed in a circuit when the current would passed. For every color that falls on the photocell, the value of the current that passed via the cell represent an idea.
In the given situation the color of light shows an independent variable and the dependent variable is clicks per minute or the current that passed through the cell
Answer:
A-the color of the light after it has passed through the cellophane
Explanation:
Who is farther from home at 4 minutes?
Answer:
lil's sister
hope this helps pls mark brainliest
What does it mean when the
compressions of a longitudinal
wave are far apart?
A. the amplitude is higher
B. the wavelength is longer
C. the wavelength is shorter
D. the amplitude is shorter
Answer:
it will option B,hope it helps
C. The wavelength is longer.
What is longitudinal wave?
A sound wave is called a longitudinal wave because compressions and rarefactions in the air produce it.
The air particles vibrate parallel to the direction of propagation.
A longitudinal wave consists of a repeating pattern of compressions and rarefactions.
Thus, the wavelength is commonly measured as the distance from one compression to the next adjacent compression or the distance from one rarefaction to the next adjacent rarefaction.
Longitudinal waves move through a medium from the point of the disturbance in the form of compressions (where particles of the medium are bunched together) followed by rarefactions (where particles of the medium are farther apart).
In longitudinal waves, the distance from one compression to the next is the wavelength.
Therefore,
In longitudinal wave the wavelength is longer.
Learn more about Longitudinal wave here:
https://brainly.com/question/2463407
#SPJ2
Which of the following would decrease the overall force felt between two charges the most?
Question 9 options:
A. Doubling the charge on the first object
B. Doubling the charge on the second object
C. Doubling the distance between the charges
If one charge is tripled and the other is cut in half, what happens to electric force?
Question 10 options:
A. It is decreased by 10 times the original force
B. It is increased by 1.5 times the original force
C. It is increased by 10 times the original force
D. It is decreased by 1.5 times the original force
Doubling the distance between the charges would decrease the overall force felt between two charges the most. The force felt between two charges is inversely proportional to the square of the distance.
What is Columb's law?
The force of attraction between two charges, according to Coulomb's law, is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
[tex]\rm F= \frac{Kq_1q_2}{r^2}[/tex]
The force felt between two charges is inversely proportional to the square of the distance.
Doubling the distance between the charges. The force felt between two charges is decreased 4 times the previous force.
Doubling the distance between the charges would decrease the overall force felt between two charges, the most.
Hence, option C is correct.
To learn more about Columb's law, refer to the link;
brainly.com/question/1616890
#SPJ2
why is sun called a source of light??
Answer:
because he give heat and energy
Which of the following Resistors A, B, C or D, would use the least power? Make
your claim, give evidence and explain your reasoning. You may use math to support
your claim.
Please Help.
i think the answer is D 10.0
Coulomb's Law says that the forces between any two charges depends ___________.
Question 7 options:
A. Directly on the size of the charges
B. Inversely on the square of the distance between the charges
C. Directly on the square of the distance between the charges
D. A&B
E. A/C
Coulomb's Law says that the forces between any two charges depends directly on the size of the charges and inversely on the square of the distance between the charges. The correct option is D. A & B
Coulomb's lawFrom the question, we are to determine the correct option.
First, we will state Coulomb's law.
Coulomb's law states that the electrical force between two charged objects is directly proportional to the product of the quantity of charge on the objects and inversely proportional to the square of the separation distance between the two objects
That is,
[tex]F \propto \frac{Q_{1} Q_{2} }{r^{2} } [/tex]
Where F is the electrical force
[tex]Q_{1} \ and \ Q_{2}[/tex] are the charges
r is the distance between the objects
From the law, we can observe that the forces depends directly on the size of the charges - Option A
and the forces also depends inversely on the square of the distance between the charges - Option B
Hence, the correct option is D. A & B
Learn more on Coulomb's law here: https://brainly.com/question/16033085
What is the displacement of a car in 50 s if it is travelling with a velocity of 25 m/s?
Answer:
v =25 m/s
time= 50 s
Velocity =Displacement/Time
Displacement = Velocity × Time
S = 25×50
s=1250m
Explanation:
v =25 m/s
time= 50 s
Velocity =Displacement/Time
Displacement = Velocity × Time
Which of the following is a variable property for a gas? Select all that apply.
shape
mass
volume
density
Answer:
volume
Explanation:
mass density and shape are not variable to my view.
pressure volume
number of moles and temperature are variable
A magnetic field is formed when electric charges move. When the electric charges stop moving, the magnetic field (which was formed by the moving charges) ceases to exist. True or False
True
Explanation:
when electrons stop.moving it cause a stoppage
in formation of magnetic field
i hope.it helps u
An object horizontally dragged across the surface by a 100 N force acting parallel to the surface . Find out the amount of work done by force in moving the object through a distance of 8 m
Answer:
800J
Explanation:
Given data
Force= 100N
Distance moved= 8m
The expression for the work done is
WD= Force* distance
substitute
WD= 100*8
WD= 800Joules
Hence the work done is 800J
Anyone knows this ???
Answer:
JUST A MINUTE KAPENG MAINIT
Please help with this !!!!!!
Answer:
answer is d from my guess
3. Gather data: Use the values above to fill in the first row of the table. Then run your own experiments to fill
in the last two rows.
f
d.
d,
h.
h,
ร”
S
d
de
2.0
h;
h.
2.0
s.
2.0
S
f
2.0
15
10
30
Answer:
urjshsus uevus e survey dydvd dydvdyd d dgdv gdyr yrgdvv yth yrhvthr
Explanation:
ydgdydvd yd dv ydvr dyve dysdvdyr gdvr
What is the main reason people and bears slip and fall on ice, be careful when outside in the snow/ice.
Answer:
Both ice and snow have a lower coefficient of friction in comparison with grass, wood or pavement.
Explanation:
The main reason why people and bears, slip and fall on ice/snow is that both ice and snow have a lower coefficient of friction in comparison with grass, wood or pavement. We present below a comparative chart of coefficients of friction associated with different materials:
Material Coefficient of Friction - Static
Ice/Snow 0.05 - 0.3
Wood 0.2 - 0.6
Asphalt 0.5 - 0.7
Grass 0.3 - 0.5
Please help. Will give branliest!!
Which action is an example of a force that operates at a distance.
A. A baseball thrown by a player.
B. A pebble falling to the ground
C. Fish swimming in the water
D. A sailboat sailing on a lake
An action which is an example of a force which operates at a distance is a pebble falling to the ground. Thus, the correct option is B.
What is force?A force is an influence which can be changed upon with the motion of an object. A force can cause an object with some amount of mass to change the velocity of the object, i.e., to accelerate the object. Force can also be described as a push or a pull of the object. A force is a vector quantity because it has both the magnitude and direction.
A pebble falling to the ground level is an example of the force which operates at a specific distance. A force applied on the pebble covers some distance.
Therefore, the correct option is B.
Learn more about Force here:
https://brainly.com/question/13191643
#SPJ1
explain the following observation referring to the appropriate process of heat transfer in each case
two cups of tea are poured at the same time . they are left for 10 minutes . one of the cups has a metal teaspoon left in it . the tea in this Cup is cooler than the tea in the other Cup at the end of the 10 minute period
Please answer correctly
Please help me!
Will give the brainliest!
According to Newton's second law equation, what is the relationship between net force applied and the acceleration of the object
Acceleration is inversely proportional to the net force
if acceleration goes up forces goes down
if acceleration goes down mass goes down
Acceleration is directly proportional to the net force
Answer:
Acceleration is directly proportional to the net force
Explanation:
The net force acting on an object is given by :
F = ma
Where
m is mass
and
a is acceleration
It can be seen that the relation between the net force and the acceleration is direct i.e. as the acceleration increases, the net force will increase. Hence, the correct option is (d).
Ocean waves are hitting a beach with a frequency of 0.100 Hz. Their average wavelength is 15.0 m. What is their average speed?
What is the frequency of a pendulum that is moving at 30 m/s with a wavelength of 0.32 m?
Answer:
Average speed=1.5 m/s
Frequency of pendulum=93.75Hz
Explanation:
We are given
Frequency, [tex]f=0.100Hz[/tex]
Average wavelength =[tex]\lambda=15m[/tex]
Speed of pendulum, [tex]v=30m/s[/tex]
Wavelength, [tex]\lambda'=0.32m[/tex]
We have to find the average speed and frequency of pendulum.
We know that
Speed,[tex]v=\lambda f[/tex]
Using the formula
Average speed,[tex]v=15\times 0.1=1.5m/s[/tex]
Hence, the average speed =1.5m/s
Frequency, [tex]f=\frac{v}{\lambda'}[/tex]
Using the formula
[tex]f=\frac{30}{0.32}[/tex]
[tex]f=93.75Hz[/tex]
Hence, the frequency of a pendulum=93.75Hz
A magnet is strong at poles and weak in the middle.give reason.
Answer:
The magnets are in the outer part not the middle
Explanation:
i know
An airplane is flying at 80 kilometers per hour when a strong tail wind, traveling in the same direction at 5 kilometers per hour, hits the airplane. How can the net force acting on the airplane be calculated?
A. add the forces
B. subtract the forces
C. multiply the forces
D. divide the forces
Answer:
A.add the forces
Explanation:
since they're both going in the same direction then they should be added to get the total net force.
pls mark me brainliest
The net force acting on the airplane if, An airplane is flying at 80 kilometers per hour when a strong tailwind, traveling in the same direction at 5 kilometers per hour is 85 km/hr so, option A is correct.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces.
For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Given:
An airplane is flying at 80 kilometers per hour when a strong tailwind, traveling in the same direction at 5 kilometers per hour,
Calculate the net force acting on the airplane as shown below,
The net force acting on the airplane = The velocity of the airplane + velocity of the wind (As they both are in the same direction)
The net force acting on the airplane = 80 km / hr + 5 km / hr
The net force acting on the airplane = 85 km / hr
Thus, the net force acting on the airplane is added.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
PLEASEEE HURRY!!
Can you tell me How the sun is responsible for all of the energy here on Earth?
Answer:
Explanation:
All of the energy from the Sun that reaches the Earth arrives as solar radiation, part of a large collection of energy called the electromagnetic radiation spectrum. Solar radiation includes visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays.
10 POINTS and WILL MARK AS A Brainlest PLEASE
Answer:
240 cm/sec
Explanation:
The speed line is closest to 240sec at 60cm.
Hope this helps! :)
pls help i’ll give brainliest if you give a correct answer!!
if a town was 90 miles away and you travel at 45 mph how long would it take to get there
Answer:
t = 2 hours
Explanation:
Given that,
Distance of the town, d = 90 miles
Speed, v = 45 mph
We need to find the time to get there. The speed of an object is given by :
[tex]v=\dfrac{d}{t}[/tex]
Where
t is time
[tex]t=\dfrac{d}{v}\\\\t=\dfrac{90}{45}\\\\t=2\ h[/tex]
So, the required time is 2 hours.
What is the only part in our body we do not stretch?
Answer:
The quadriceps consists of four muscles: the skinny rectus femoris and the three huge “vasti” — vastus lateralis/intermedius/medialis. The vasti are only elongated by knee flexion, which is limited to about 120˚ when the calf hits the hamstrings. The vasti cannot be stretched strongly.
Answer:Masseter and temporalis
Why it’s unstretchable: The jaw can only open so far.
Why it’s a dang shame: Jaw tension is epidemic, and trigger points in these muscles cause a wide array of strange face and head pains, including toothaches, headaches, and earaches.
Energy is defined as ____________.
The ability of an object to produce a change in the environment or itself
motion
the effort required to perform work
power
Answer:
The effort required to perform work
Explanation:
Which element has the same number of valence electrons as rubidium.
A. lithium
B. argon
C. calcium
D.iron